Macbook Pro 13 not powering up at all. Totally dead

I plugged in a mobile battery power station to charge today, http://www.iwantoneofthose.com/gift-tech-stuff/portable-iphone-charger/30001820. html
and my Macbook pro 13 suddenly died. It will not turn on via the power button, there's no lights on the battery indicator on the side of the Macbook and nothing at all on the power adapter. I've checked the fuse in the plug and thats ok. Are there any internal fuses that could have blown in both the macbook and the power supply. I charged it before with no problems. Been through lots of these solution pages, but i'm totally stuck

Well simple the battery in your Mac ran out of power. When that happens, which is really bad for the battery, sometime you must let the battery charge for X amount of time before the system will turn on. All Macs use both battery power and AC power at the same time even when the AC adapter is connected and the battery charge reaches 100%.
So if the battery is fully drained the system will not turn on. Stop using the portable charger unit you have 100% charge of the internal battery.

Similar Messages

  • TS1365 My MacBook Pro will not startup.  At all.  The suggestions from Apple Support are not helping.  At all.  Someone help?!?

    My MacBook Pro will not startup.  Its not responding at all.  Does anyone have any suggestions on how I can correct this?

    HI Catherine,
    First, make sure it it shut down by holding down the power button for 5-10 seconds. Plug in the power adapter. Press the power button and hold down the shift key to see if you can start in Safe Mode.
    If the power adapter and/or battery are known good, the next thing I'd check would be the RAM to make sure it is securely seated. If batt and/or power adapter are questionable, then you'll want to find one or both and try them out; if you don't know someone with a similar MBP, this might be most easily accomplished by making a free appointment at an Apple Store "genius" bar.

  • My camera on my macbook pro has not been functioning at all. What do I do?

    I've fully updated everything. My camera won't work on Photobooth, nor Skype. Photobooth even says I do not have a camera connected! Yesterday the little green light was turning on when I video called on Skype, but now even that won't turn on! I try reselecting it on Skype. I try restarting my computer (multiple times...) and I still can't get it to work! Please, offer any and all help you can! It's really starting to become an annoyance, and I need it to work! If you do offer help, it'll be greatly appreciated!

    Try Reset SMC.  http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • MacBook Pro does not go to sleep when power cord is connected

    Hi Experts,
    I have recently discovered that my MacBook Pro (2009) with OSX Lion does not go to sleep when the power cord is connected. It does not matter if I close the lid or select sleep from the Apple menu. All that happens is that the screen is powered off, the SIL is solid and I can hear the HDD/fan. I have not changed any of my power settings recently and it has not been a problem previously. If I disconnect the power cord the MB goes to sleep as supposed to (the SIL led starts flashing).
    Doing some research I have found other users with somewhat the same issues when VMWare Fusion is installed. I have done some further testing and it seems that if I disable the virtual machine's Network Adapter and quit VMWare Fusion the MB goes into sleeping mode when the lid is closed even with the power cord connected. Enabling the Network Adapter again prevents the MB to go into sleeping mode when the power cord is connected. This even applies when the VMWare application is shutted down.
    My guess is that the Network Adapter somehow prevents the MB to go into sleeping mode. The workaround is of course toggling the Network Adapter on and off but the virtual machine has to be running in order to do so. Not being that familiar with network settings on a Mac is there any other way to get around the problem?
    Thanks in advance :-)

    To anyone,
    I have turned internet sharing off but the Ethernet box remains checked. If I uncheck the Ethernet box, the Internet Sharing bubble turns red, however when I close System Preferences and re-open, the box is automatically checked although Internet Sharing is off. Because of this my Macbook Pro will not sleep properly.
    All other sharing items are turned off. Only Internet Sharing continues to automatically show Ethernet as active from a Wi-Fi connection.
    Any advice?

  • My macbook pro will not turn on and the charger is not lighting up

    please help!! my macbook pro will not turn on at all, when i plug in the charger it will not light up at all, it suddenly shut down when i was using it.

    Is there any charge left in the battery?
    Press the button on the left side, near the front edge. If no green lights appear, battery is flat. And if the power brick ain't workin' (by virtue of its pilot light not glowing), then it will remain flat and the computer will not power up. If this is the case, maybe try with another power brick of similar size and see if it charges.
    Else the logic board is toast and pitbull's on the money.
    Either case, my gypsy crystal ball forsees a trip to an Apple Store or a Service Provider in your future...

  • My MacBook pro will not connect to the Internet through wifi yet all other devices do

    My MacBook pro will not connect to the Internet through wifi. I have several other wifi enabled devices and they are all connected to the Internet just fine... What could/would cause this?

    Disable your AirPort and enable in a second. Or check, maybe you need to type in correct digits in; Settings/Network/Advanced/Configure...

  • I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas

    I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.

    Go to Finder > Preferences then select the General tab
    Make sure External disks is selected.

  • My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

    My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

    try this.
    get back into your router's settings and start deleting devices that are not connected to your router.
    you can also delete the ones that are connected - they'll connect again.
    on the DHCP side of it, increase the amount of users that can connect/log in to your router.
    see if that sorts it out for you.
    good luck.

  • My iphoto on my MacBook Pro will not let me import my photos from my canon t3i. It is blurred over both import all, and import selected showing that I cant choose those options. I've tried with the memory card and usb cord. Please help!

    My iphoto on my MacBook Pro will not let me import my photos from my canon t3i. It is blurred over both import all, and import selected showing that I cant choose those options. I've tried with the memory card and usb cord. Please help!

    What version of iPhoto?
    Can you access the images with Image Capture (in your Applications Folder) ?

  • Hi, I need to sync my phone to our home laptop. Phone was synced to a Mac that I no longer have access to. Can I sync my phone to the home laptop (MacBook Pro) and not lose all of my photos and contacts??

    Hi, I need to sync my phone to our home laptop. Phone was synced to a Mac that I no longer have access to. Can I sync my phone to the home laptop (MacBook Pro) and not lose all of my photos and contacts??

    Hi Michela27,
    Thanks for visiting Apple Support Communities.
    If you have content on your iPhone that isn't on your computer, the best thing is to use the advice in this article to transfer it to your new computer before setting up sync:
    iTunes: Transferring media from your iPhone, iPad, iPod touch, or iPod
    http://support.apple.com/kb/HT1209
    Cheers,
    Jeremy

  • My macbook pro does not read my camera's sdhc card all of a sudden, why?

    my macbook pro does not read my camera's sdhc card all of a sudden, why?

    Hi mukilb,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    About the SD and SDXC card slot
    http://support.apple.com/kb/HT3553
    Cheers,
    - Judy

  • HT1379 My Macbook Pro will not start at all. I automatically get the Apple Icon and a pinwheel that keeps clocking. How do I fix?

    If anyone can assist with why my Macbook Pro will not pass the first screen, please respond. I have been getting the spinning pinwheel for a few days and cannot lg on now. In recent days I deleted some files and thought that would help the computer move a little faster but now it will not sllow me to access my account. Any suggestions on how to get pass the initial screen?

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • HT1386 My MacBook Pro HD crashed.  It is all up and runmning except for one issue.  I have about 200 songs on my iPhone but have only gotton 53 back on my laptop and those are the songs I purchased via iTunes. How do I get the rest of the songs from iPhon

    My MacBook Pro HD crashed.  It is all up and runmning except for one issue.  I have about 200 songs on my iPhone but have only gotton 53 back on my laptop from my iPhone and those are the songs I purchased via iTunes. How do I get the rest of the songs from my  iPhone back onto my HD. 
    The songs I'm not able to import casme from CD's.  Nothing from napster etc.
    I've tried and tried to import them rom iTunes vis "Library"  " Import"

    Hey kbert73
    I would do a transfer of purchases from the phone and not sync. If you sync then it will want to start over and sync music that is on the MacBook Pro. If you want to transfer the music, check out the article below that will give you multiple options on how to move. I have also provided on how to sync with multiple computers.
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/ht4527
    Using iPhone, iPad, or iPod with multiple computers
    http://support.apple.com/kb/ht1202
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Mid-2009 Macbook Pro will not turn on

    Hi Folks,
    so my mid-2009 15in Macbook Pro will not turn on. I updated the OS to Mavericks in December 2013. I'm from California, but I recently moved to the Guam/Marianas area where it is more humid and generally around 87 degrees F all day. For the past month my computer has worked fine, albeit I did notice the fan was running a little more than usual. I usually would just put it into sleep mode when I would finish using it (apparently a bad idea based off of reading other posts concerning humidity and, more importantly, heat). One day I finished using it, closed it and the next day went to open it; I could hear the fans start to work, but then it stopped. It hasn't turned on since. You press the power button and nothing happens. I tried all the troubleshooting stuff.
    So, my question is this: what do you think is the problem? Moreover, how much do you think it could cost to repair it? My experience with computers suggests to me that it's probably a dead motherboard. I'm wondering if it's worth trying to salvage this thing or if it would be prohibitively expensive. There are no Apple stores in the area to take it in to get advice unfortunately.
    Now, I just want to vent a little frustration. I have many apple products, and I've even switched my mother over to an apple computer, but now that I need some very basic support, apple doesn't provide a contact e-mail or a free chat? I think charging someone $19 for 'one time assistance' is ludicrous. I bet if I brought this into an apple store I could at least get some advice, and thus get some idea how I want to proceed with repairs or not. I suppose I'm also rather frustrated that my macbook, which I have been most happy with all these years, breaks because I go somewhere a little more humid and generally warmer? It would appear that the hardware failure is connected to the climate. This makes me skeptical about purchasing another mac if it can't handle a little humidity. (I have not spilled liquids on it, nor have used this computer while transitioning from an air-conditioned/humid location which could potentially cause condensation). I do not think I'm being unreasonable (yes I do think a $2500 computer should not fail after less than 5 years), but if you think I am unreasonable, please enlighten me.
    Thanks for any help. I really appreciate it.
    Ken

    Ken,
    the “Important Handling Information” in the little white manual that came in the box with your MacBook Pro states that its operating temperature range is from 50 °F to 95 °F (10 °C to 35 °C), and that its operating range of relative humidity is 5% to 90% (non-condensing). If your corner of the Pacific is outside of these ranges, the manual states that “Failure to follow these handling instructions could result in damage to your MacBook Pro”.
    I have no idea what problem your MacBook Pro has; since you’ve tried all of the troubleshooting stuff, you’ll need to somehow get your MacBook Pro to a qualified service facility to diagnose the problem. If the logic board does need to be replaced, it would probably cost hundreds of dollars for a replacement, and you might find that purchasing a replacement used MacBook Pro of the same model to be price-competitive with just replacing your MacBook Pro’s logic board.
    If you find Apple’s out-of-warranty policies unacceptable, then your only alternative to venting would be to purchase your next computer from a different company which has out-of-warranty policies more to your taste.

  • When I try to open a Pages document from iCloud, created on my iPad, I get message stating I need a newer version of Pages.  When I go to app store all I get is "installed" when looking at pages app. my Macbook pro is up to date with all updates.

    When I try to open a Pages document from iCloud, created on my iPad, I get message stating I need a newer version of Pages.  When I go to app store all I get is "installed" when looking at pages app. my Macbook pro is up to date with all updates. Any ideas?

    You have 2 versions of Pages on your Mac.
    Pages 5 is in your Applications folder.
    Pages '09/'08 is in your Applications/iWork folder.
    You are alternately opening the wrong versions.
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5/5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
    Pages 5.1 sometimes can not open its own files and you will get the warning that you need a newer version.
    Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Anything that is saved to iCloud is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Apple has not only managed to confuse all its users, but also itself.
    Note: Apple has removed over 100 features from Pages 5 and added many bugs:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
    Peter

Maybe you are looking for

  • Urgent: regarding ALV  report display problem

    hi, There are 3 problems:- 1.) I had made a ALV report in which i have to display 'POSTING DATE' (iseg-budat) when we execute the report i.e. it should be displayed as  PERIOD :- _______  to _______ on alv report .. 2.)the 2nd problem is dat when i u

  • Pulling a Record set and then using a field within that record to pull additional information from the table.

    I am pulling information based on the following "If" statement; If({JCT_CURRENT__TRANSACTION.Category} = "L"     and "cost" in {JCT_CURRENT__TRANSACTION.Transaction_Type}     and {JCT_CURRENT__TRANSACTION.Transaction_Date} > {@Prev Week}     and {JCT

  • Switching tabs in a tabstrip

    I have a tabstrip with two tabs. Under the first tab i am displaying a table. The user has the option of selecting one or more rows of this table, and hit an "Edit" button. At this time, the selected rows will be picked and transferred to a second ta

  • N97 unable to make a call from contacts list

    Hey, I was looking for some confirmation from others about this. I tried to make a call this morning by doing exactly what I would do on my E71 or N95 when a contact has multiple numbers: 1) Opened up my contacts. 2) Clicked a contact with multiple n

  • FRM-92101 there was a failure in form server during startup

    we are using R12, All the instance started successfully, but when i get in to the form server in application side the error comes like FRM-92101 there was a failure in form server during startup. this could happen due to invalid configuration. please