Macbook Pro 13 turns off after few seconds.

When I turn MacBook pro 13 on sound play and fans run at full speed but it runs turns off after few seconds.

Correction:
When I turn MacBook pro 13 on sound play and fans run at full speed but it turns off after few seconds.
- MacBook does not work on batery - evenif  i disconect batery - no result
- I try with diferent power adapter - no result.

Similar Messages

  • Apple Mac book pro just turns off after few seconds after turning on

    Hi Folks,
    I just turned on my Apple Macbook pro. Whenever, I turn it on, the progress bar comes with the Apple symbol and after few secs, it turns off by itself. Have tried to turn on the MBP number of times but the same result
    Please help...
    Regards,
    Nadeem

    Correction:
    When I turn MacBook pro 13 on sound play and fans run at full speed but it turns off after few seconds.
    - MacBook does not work on batery - evenif  i disconect batery - no result
    - I try with diferent power adapter - no result.

  • Hp zr2740w turns off after few seconds

    I have the same problem as described in an earlier post:
    http://h30434.www3.hp.com/t5/Desktop-Audio-Video-Monitors/hp-zr2740w-turns-off-after-few-seconds/m-p...
    My HP zr2740w turns off after a second or so. Tested with vga/dvi/displayport and desktop pc/laptop, so it's not a cable issue.
    My hp zr2740w was bought in July 2012 so it's probably out of warranty. I live in Finland. The webshop I ordered the hp zr2740w does not exist anymore. The HP support pages don't seem to have any support numbers for displays.
    I took the display to a local IT support / electrician guy and he said it's a power supply issue. But he couldn't find a place to order the part so he could replace it.
    Hopefully I'll get some answer here or an idea what to do. Wouldn't want to throw away an expensive display just because it has power issues.

    @Joni_k 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Macbook Pro not turning off after spillage.

    Hi
    Yesterday night I was doing something on my laptop, and a bit of yougurt got spilled on the keyboard part. I wiped the yogurt off the keyboard very quickly, I left it upside down and went to sleep.
    Now I've come back home , and I have tried to turn on the laptop, but it doesn't work.
    The battery indicator lights are working, and I have tried to plug the laptop in, and it shows that it is charging.(this was only for a moment, I plugged it out straight afterwards.
    Although the battery works, when I hit the power button, the display stays black and you don't hear the usual click the MBP gives when turning on.donw
    Now I've left it upside down to dry.
    What should I do, and how long should I leave it to dry? What has likely happened?
    As my laptop is only 10 months old, does the warranty cover this?
    Thanks a lot.

    Warranty doesn't cover damage such as spills
    Trying to dry it will not work.  Everyone tries that.....it won't work
    Damage is done. Make call to Apple for service and diagnostic repair
    Every time you turn it on damage is occurring

  • My one day old MacBook pro just turned off and it won't come back on either through mains or battery power

    My one day old MacBook pro just turned off and it won't come back on either through mains or battery power it's as if the unit is completely dead. Even with the mains plugged in there is no green or orange light to say its charging or full charged. The battery was fully charged anyway seconds before the screen went off.

    When you say no green or orange light are you refering to the little led on the magsafe connector?  That could mean either the charger/cable are bad or the circuitry in the MBP is faulty.  Since this is a brand new MBP best bet is to take it back to an Apple Retail store and have the genius bar staff take a look.  They can determine if it needs to be reparired or replaced.

  • Hp pavilion 15 screen turn off for few second when i turn on or off charger

    Hello,
    I bought new hp pavilion 15. i notice many time when i turn on or off my charger, screen turn off for few second then after few second screen turn on. please help me out its furstating me . 
    This question was solved.
    View Solution.

    >> It is customary and in this case Necessary for you to provide the exact model of Notebook you have a problem-with. [ There are MANY variations of HP Pavilion 15-T Models, for example. ]
    >> You should always be sure you have installed/applied ALL updates for all of your Notebook's hardware devices, and ALL Windows Updates labeled "Important" and ALL "Optional"-section Windows Updates for any hardware device in your Notebook which the Windows Updates service detects (and offers an Update for).
    >> For example, this link:  http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=6787... has the latest HP Drivers and Patches for a specific variant of the Pavilion 15-T.
    >> AFTER you are certain you have all the latest drivers and patches in-place, you can try the 'old Trick' as follows: Shutdown Windows; when your Notebook has turned-Off completely (after Shutdown completes), THEN remove the AC Adapter connector and remove the BatteryPack.
    >> Hold DOWN the power-button continuously for a full 62 seconds. Then put your BatteryPack back in your Notebook. Do NOT connect your AC Adapter yet. Power-On the Notebook and Logon into Windows. Check the Control Panel\Power Options settings and find out the Charge Level of your BatteryPack. If it is below 25%, then (and only then) plug in your AC Adapter and connect it to your Notebook... and let the BatteryPack charge up "completely" to 98-100% Level. *Note: if your Adapter has a removable AC cord-connector, be certain that connection is 'tight'. <Do NOT stick your fingers or ANY object into any AC Adapter!> If you even think your AC Adapter is faulty, GET A NEW ONE! Damaging a $400-$800 Notebook PC is NOT worth it, versus the cost of a New Adapter.
    >> Use the built-in Help functions of your Notebook to find out how to DISABLE(!) "Hibernation", and eliminate that TROUBLE-CAUSING 'feature' of Windows PCs. When you have done so, always REStart Windows, to be certain the changes are applied. *Many changes and Updates take place 'Fully' only "during" Shutdown and/or "during" Startup of Windows PCs. [While Windows O.S. is "running", most of it's System Files are LOCKED.]
    >> FYI: always let your BatteryPack run down to it's Lower setting BEFORE you plug-in your AC Adapter/Charger. Charging  any rechargeable BatteryPack at  "mid-charge-levels" causes shorter BatteryPack life...

  • Macbook Pro suddenly turned off, not charging either.

    My Macbook Pro suddenly turned off last night. I've tried all the troubleshoots listed in the user manual. Thought it was just batt low but it would not even charge, neither the battery sign located on the left side wouldn't show any sign/blink/color. Please help me, it's just 8-month old and Im not sure what could be the reason of this problem. PLEASE AND THANK YOU

    MonicaDCC wrote:
    Hi i'm sorry but what is  SMC?
    System Management Controller
    The System Management Controller (SMC) is responsible for many  low-level functions on Intel-based Macs.  These functions include:
    Responding to presses of the power button
    Responding to display lid opening and closing on portable Macs
    Battery management
    Thermal management
    The SMS (Sudden Motion Sensor)
    Ambient light sensing
    Keyboard backlighting
    Status Indicator Light (SIL) management
    Battery status indicator lights
    Selecting an external (instead of internal) video source for  some iMac displays
    You didn't click the link to Apple's instructions and explanation, why?
    Here it is again, click, read, follow the links for your machine and the instructions how to perform or take your machine in for service.
    https://support.apple.com/kb/HT3964

  • I have a CC subscription and had it loaded on my Mac and my old MacBook pro.  I bought a new macbook pro and turned off CC on my old laptop but when I try to load it on the new one it keeps saying I already have it activated on two devices. Help!

    I have a CC subscription and had it loaded on my Mac and my old MacBook pro. I bought a new macbook pro and turned off CC on my old laptop but when I try to load it on the new one it keeps saying I already have it activated on two devices. Help!

    Contact support by web chat or phone to reset activations.
    Mylenium

  • Macbook Pro  suddenly turns off by itself while on the internet or Skype

    While on Skype or internet my MacBook Pro suddently turns off and has to be rebooted. This is while the computer is plugged in to external power source. Any suggestions?

    Any suggestions?
    To get the audience of MacBook Pro users, try posting in the appropriate MacBook Pro discussion area.

  • Macbook pro 17 turns off when switching to high performance mode

    Hi guys!
    My 2009 Macbook pro 17 turns off and goes dead when switching to "high performance" graphics in the energy saver controll panel.
    This happens also when the battery is 100% charged. i must reconnect powersupply to reboot.
    The battery is new, from june this year.

    Aardal87 wrote:
    I have just re installed the system. and the problem continues.
    I guess ur solution isnt worth trying on a fresh system install?
    It will not do any harm trying it but you are probably correct in these circumstances. 
    If the symptoms are consistent, then a savvy technician at an Apple store genius bar should be able to define the problem.
    Ciao.

  • Ipod wont turn on unless I restore it and even if I do it turns off after few hours and wont turn on again unless i restore it again?

    ipod wont turn on unless I restore it and even if I do it turns off after few hours and wont turn on again unless i restore it again?

    Are you restoring the iPod from a previous back or to factory settings? If you haven't restored to factory settings yet, I would do that next.  And if the problem still continues, it's most likely hardware related, in which case you'll want to schedule an appointment at your local Apple Store/Genius Bar to have them take a look at it.
    B-rock

  • Macbook Pro shuts off after few seconds of gray screen

    Help - I came home to discover my power cord had died and my laptop turned off due to no power. I used a friend's power cord to turn it on later that night and send some emails. I bought a new power cord the next day, plugged in, and turned  the laptop on. It stayed on the gray screen with a spinning wheel beneath the apple logo for a while. I restarted it and it turned off after a few seconds of the gray screen. An empty bar flashes twice horizontally at the bottom before the spinning bar begins.
    I tried booting in safe mode, but it would just stay on the gray screen. I tried doing shift+command+v and received a message about keys out of order and disk error full, can't repair. I was able to boot from the install disc, and when I click "Repair Disc" I get the same erros. Not sure what to do now?

    Migg7 wrote:
    Would my time machine data be preserved with this?
    Well this is the big gamble. You really don't know for sure.
    TimeMachine has gotten corrupted from a failing original drive and then unable to restore properly to a new drive.
    It's not like you can access the files on a TM drive directly and cherry pick what you need and leave the rest. It's all or nothing.
    If you go erasing your only other copy on the boot drive, which the files still could be accessed from another boot drive, and if you find out the TimeMachine drive can't restore, then your up the creek without a paddle right?
    So if your able, create a data recovery drive and try to rescue your second copy of the files on the boot drive or restore the TM drive to the second boot drive , so this way your files can be accessed directly if you need it and you have two copies again.
    Once you can direclty access your files then you can go about erasing and installing on the internal boot drive.

  • Stuck in recovery mode and turns off after 30 seconds

    Hi everyone,
    I have done my research but no one seems to be having the exact same problem that I have. Here's what happened:
    When I was updating the firmware of my Ipod Touch 4g iOS to 4.2 in a MacBook Pro, it suddenly cut the USB power because it was low on battery. After which, my Ipod now only goes from the apple logo to recovery mode (connect to itunes screen)then turns off after about 30seconds.
    It still gets recognized in iTunes but it doesn't stay powered on long enough for something to be done (restore, iRecovery, etc.). I have tried doing the DFU to recovery mode, holding the home button when connecting the cable, etc.
    I have everything backed up so restoring is not an issue. I just need it to work.
    Help!

    Not sure if this is the same problem exactly but all of a sudden my phone was stuck in headphone mode & wouldn't make sounds through the speakers at all. This was because of a dirt/dust buildup in the port. What I did was hold the phone & a flashlight in one hand & scraped out the crap with a safety needle/pin thing. This was very useful because I could exactly see where the stuff was & eventually I dug it all out. Works fine now! Hope this helps you/anyone else having a similar problem

  • Help!!! My Macbook Pro suddenly turns off

    Towards the end of my work day, my Macbook Pro suddenly shut off. I thought I had accidently pressed the power button or something, and so I turned it back on. However, 10 minutes later it randomly shut off again. The power was at about 80%. I connected the laptop to charge, and I was able to use it perfectly with no problem. After about an hour, I unplugged it and it continued to turn off again.
    I am currenly running Mac OS X Version 10.6.8. I have included the power status, to see if this might be of any help.
    CAN SOMEBODY PLEASE HELP ME?
    Thanks!
    Battery Information:
      Model Information:
      Serial Number:          9G94517T08VNC
      Manufacturer:          DP
      Device name:          bq20z451
      Pack Lot Code:          0000
      PCB Lot Code:          0000
      Firmware Version:          0003
      Hardware Revision:          0002
      Cell Revision:          0100
      Charge Information:
      Charge remaining (mAh):          3066
      Fully charged:          No
      Charging:          Yes
      Full charge capacity (mAh):          3490
      Health Information:
      Cycle count:          1321
      Condition:          Replace Soon
      Battery Installed:          Yes
      Amperage (mA):          659
      Voltage (mV):          12250
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          5
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          5
      Wake On AC Change:          No
      Wake On Clamshell Open:          Yes
      Wake On LAN:          Yes
      Current Power Source:          Yes
      Display Sleep Uses Dim:          Yes
      Battery Power:
      System Sleep Timer (Minutes):          5
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          5
      Wake On AC Change:          No
      Wake On Clamshell Open:          Yes
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          Yes
      ID:          0x0100
      Wattage (W):          60
      Revision:          0x0000
      Family:          0x00ba
      Serial Number:          0x00ebec2e
      Charging:          Yes

    $129 pre taxes
    Battery Replacement > How much does battery replacement costs?
    http://www.apple.com/support/macbookpro/service/battery/

  • My macbook pro started turn off slow after doing the dirk repair

    It takes like a minute to turn off. it used to take a second to turn off and I loved it but now it takes a lot longer.all I did was do the "disk repair" and verify the disk. Thanks.

    It would help if you mentioned what OS you are using. For 10.6 and under boot from your OS installer disk. Stick the disk in the optical drive slot and reboot while holding down the c key. Select Disk Utility from the Utilities menu and run Repair Disk not Repair Permissions. For Lion 10.7 boot while holding down the command-r keys so you boot into the Lion Rocovery disk then select Disk Utilities and ....

Maybe you are looking for

  • Multiple Materials on a single object

    I'm sure I'm missing something...but I'm finding it impossible to use multiple materials form the 3D toolkit on a single object unless I separate the material differences to separate objects....which I'm sure is crazy. But if I import an object with

  • Syncing iOS bookmarks via iTunes doesn't work

    Some background on my bookmarks.  I always used a utility (Xmarks) to sync my bookmarks with their cloud service.  With iCloud and Safari 5.0 this had some major problems and still does.  So basically I copied over my bookmarks to Safari and continue

  • Afl live pass

    I recently selected the afl live pass payment by credit card not realizing that Telstra give you a special code to activate so I cancelled the subsciption to reapply with the voucher and now I can't get it to work ??

  • It would be very nice if Thunderbird would automatically remember e-mail that I mark as junk mail.

    I get so many junk e-mails. Often, T-bird sees most of them as junk and puts them in the junk folder. However, there are many that it does not catch, so I have to create message filters. Also, T-bird doesn't always remember e-mails that it marked as

  • Volume changing on patch change

    Hi everyone I'm fairly new to mainstage.  There are a couple of patches I've created with multiple software instruments that are always being set to mute (not in the fader section but in the midi volume section at the top of the channel strip) whenev