Macbook Pro 13" will not sleep when I shut the lid

Hello Community,
This is my first time using the forum. I have a macbook pro 13" 2009 model. Recently I had my MBP connected to an external monitor. I shut the lid while it was connected to the monitor and forgot to turn off my bluetooth mouse. Later that night the mouse was bumped, waking my macbook and setting it to clamshell mode. I put it to sleep again, opened the lid and woke it, but the LCD on the laptop did not turn on. I reset the PRAM and the NVRAM with no luck. I disconnected the monitor, rested the P/NVRAM and it would boot with the laptop screen and once everything was loaded my screen went black and then went to sleep on its own. I tried powering on and off using the P/NVRAM key commands...and nothing. So I opened the bottom case and physically disconnect the battery, reconnected the battery, put the bottom plate back on and powered it up. The screen began working again, now I have a new problem, the MBP WILL NOT sleep when I shut the lid anymore. I even reinstalled the OS and still no luck? If anyone has anything helpful that I could try to get this feature working again it would be much appreciated. If there is some terminal command I could try or some other troubleshooting method. I even put a magnet by the right side of the keyboard to try to trigger the sleep switch.
Any advice would be appreciated.

I resolved my issue in a very unlikely way. In my earlier post I mentioned that I wiped my hard drive and was starting from scratch. Well I reinstalled windows 7 through bootcamp and it fixed my sleep issue. That's right folks...Windows fixed my mac. I think that it was an EFI issue. I think this because windows 7 uses EFI and during installation it must have reset the sleep values to normal. I feel when you reinstall Mac OSX the EFI partition on the drive should get wiped and reinstalled as well. I also feel that apple should have an option within System Prefs for the user to select what the way is that the computer responds when the lid is shut instead of the ritual of trickery and problems that the clamshell mode can cause.
Hope this helps someone.

Similar Messages

  • Does not sleep when I close the lid...

    Never encountered this before! I have 1 MacBook that works fine, but bought another today that will not sleep when I close the lid. It does sleep when I select it from the menu, but not when I shut it.
    Any ideas?

    Mine recently started doing the same thing. Now everytime I want to go out with my computer I have to pack up the charger, even if I only end up using it for 15 minutes, because the battery is wasted by 2.5 hours.

  • My computer does not sleep when i shut its lid mid 2012 15" Yosemite

    HI before and since i had upgraded to Yosemite my macbook  pro mid 2012 15" has not gone to sleep when i shut my lid i have tried to reset to default in the power settings but that didn't do anything any thing els i could do?.

    Make sure that iTunes is not running, print que is cleared and no dvd disc is in the super drive.
    Computer should not sleep if Internet Sharing is to work.
    System Preferences > Sharing > Internet Sharing
    http://support.apple.com/en-us/TS5357
    http://support.apple.com/kb/TA22350

  • My macbook pro charger will not charge my mac. The charger is in great condition, but it will not register as charging and it will not charge my computer. is there any way to fix this?

    My computer has stopped recieving charge. The charger is in great condition, but it will not register, nor charge my computer. I do not know if its my mac or the charger. Is there any way to fix this?

    Do you have another charger to test with?
    It is very possible that somehow the wire might have gotten bent without your knowledge and that is why it is not working.
    If you have an Apple store near you, you might want to set up a genius appointment so that they can test it for you.

  • New Macbook Pro 17" doesn't sleep when lid closed, but works if done manual

    I never had this problem with my last macbook pro. This is the new unibody 17"
    The computer will not go to sleep when I shut the lid. The screen stays on (the apple logo glows). And the little light on the right stays solid (no blinking).
    Yet, when I go to the apple in the top left of the screen and manually put the computer to sleep, it goes to sleep very normally.
    Please Help!
    Tim

    Try resetting your SMC.
    Resetting the System Management Controller >>
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

  • My 2008 MacBook Pro (A1260) will not startup

    Greetings!
    I was given a 2008 MacBook Pro that will not startup. I press the power button and it trys to start for like 5 seconds and goes no further. The battery is fully charged and the powercord is pluged in. I know that Apple has it listed a "Vintage", but I'd like to get it working. Any suggestions?
    Thanks,
    David

    David,
    were you also given two grey installation DVDs which originally came in the box with your MacBook Pro, called “Mac OS X Install Disc 1” and “Mac OS X Install Disc 2”? You’ll need those discs to be able to further diagnose the current problem. If those discs weren’t given to you, you can purchase a replacement pair from Apple.

  • MacBook Pro will not sleep when charging and display is closed.

    Hi,
    My Mac will not sleep when it is charging. When I close my display, it will not sleep.
    When I unplug the power cable, it sleeps...
    I've tried to reset the SMC, and I think i did, the charger went from green to red etc different colours..
    Does anybody know what this might be?
    thanks

    AIGHT GUYS!
    This is how to fix it, and i guarantee u its 90% the cause.!
    first of all, if you are a lion user (most likely all of you with this problem) go to system preferences, and then to sharing. turn all sharing OFF. especially printers....
    open a terminal, and type in :
    pmset -g assertions
    This will show u if somehting is preventing ur mac from sleeping. on the left colomn, it should say "PreventSystemSleep" and on the right colomn a number. mine was one, which is probably the same for you guys.
    Go to system preferences > Print & Scan > Open Print Queue. Make sure all the printing queues are empty and nothing is in there. You do not need to pause any or anything like that just make sure nothing is in the queue.
    Close your macbook lid and look at ur light it should be sleeping. HOPE THIS WORKS FOR U
    took me long enough to find out.
    dont hesitate to ask me any questions

  • After recent update to my macbook pro itunes will not open, it just bounces when I click on it

    fter recent update to my macbook pro itunes will not open, it just bounces when I click on it

    Means they are going to mess up your iPhoto Library pictures database  so it's unreadable by older versions of iPhoto on older OS X operating systems.
    You have the choice to right click on the iPhoto Lbrary and inside is a folder called Origianls, use the Finder to Duplicate this folder, then move the OriginalsCopy out of the iPhoto Library folder and save it elsewhere.
    I dont' think Apple will every intentionally touch the originals, however it's possible they could.

  • HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    Hi alangium,
    Welcome to the Support Communities!
    Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    This article may provide some information about your Mini DisplayPort to AVI adapter.  Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    http://support.apple.com/kb/HT3382
    18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
    The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573#5
    How can I detect displays?
    If the detect displays option is not available, hold down the Option key while you are in the Display pane.
    How do I select additional resolutions on my display?
    You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
    To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
    I hope this information helps ....
    - Judy

  • HT1338 how do I boot a MacBook pro that will not shut down

    HOw can I reboot shut don MacBook pro that will not shutdown, please help.....?......

    Hi, I'm having similar problem. I just got a Lacie ext drive to back up my photos and vids and now my laptop wont shut down or go to sleep properly.  May or may not be related to Lacie. Could just be a coincidence.
    I first noticed problem when I closed it to go to sleep and the apple logo kept flashing on and off.
    When I opened the laptop the screen was flashing white then black, then white then black.   Had to force shut
    it down (opt, cmnd,power), had to hold it down a very long time before it responded.  However, that didn't keep it shut down. It just started back up again.  But at least it wasn't flashing. 
    Then when i tried to shut it down normally it would shut down, go black for a moment and then the Apple song would play and it would start  back up again.    It also won't stay asleep. It sleeps for two seconds when put into sleep mode then snaps awake.
    strange problem... Very annoying. Next option is to unplug and let battery run out.

  • Why won't my MacBook Pro go to sleep when I close the lid?

    All of a sudden, my MacBook Pro has stopped going to sleep when I close the lid. Instead, the indicator light on the front stays on steadily. When I then open the lid, I am asked to log in again, but before I can type anything, the window goes completely black. My only choice at this point has been to hold the power button down long enough to shut the laptop off. Then I wait a minute or so before restarting. Is there a setting I need to check to prevent all of this from happening? I have tried restarting in Safe Mode, then restarting normally, but still the laptop will not go to sleep when I close the lid.

    Some process is impeding the sleep function. Since you've tried rebooting and it persists, check and see if Time Machine is hellbent on completing a backup, cause it can have that effect.

  • HT3964 I have a MacBook Pro that will not boot up. The apple symbol   Read more: I have a MacBook Pro that will not boot up. The apple symbol is there and a spinning wheel continues to spin. Any options??

    I have a MacBook Pro that will not boot up. The apple symbol is there and the spinning wheel keeps spinning. Any idea how I can fix this?

    Reinstall OS X.
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    OR
    Reinstall Snow Leopard without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • HT3964 2009 macbook pro superdrive will not load discs

    2009 Macbook pro superdrive will not accept discs. The loading mechanism appears not to be responding. The mechanism may be jammed as it will not allow the disc to be fully inserted. Last time I played a disc I had trouble ejecting it. I managed to get disc out can't remember how. Think the disc must have partially ejected and I managed to pull it out. Can anyone help?

    Hi kayj128,
    Thanks for using Apple Support Communities.  This article has steps for troubleshooting the SuperDrive built in to your Macbook Pro:
    Apple Computers: Troubleshooting the slot-loading SuperDrive
    http://support.apple.com/kb/HT2801
    Doesn't accept discs
    Be sure to check your disc to make sure it is flat. You can check this by putting the disc upside-down on a flat surface. If the disc is bowed up on any side or in the center, do not use the disc because it might get stuck in the drive. Do not use discs that have anything attached to them or dangling from them (such as "sweeper" or cleaning discs).
    If the drive struggles when you put in a disc or stops part-way, carefully look at the disc for labels that may be interfering. If there aren't any raised labels then try putting the disc in a few more times.
    Try another disc to see if the issue is being caused by a specific disc.
    Make sure you insert the disc far enough for the drive mechanism to activate. You need to insert discs nearly all the way before the drive will activate and pull them in. If you don't completely insert a disc, the drive will reverse and push the disc back out.
    Allow the drive one or two seconds to accept the disc while it is fully inserted.
    Reset the System Management Controller (SMC).
    If the drive repeatedly does not accept discs, contact Apple or an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store.
    Cheers,
    - Ari

  • My macbook pro battery will not hold charge

    My macbook pro battery will not charge. The laptop will only turn on after it has been plugged in to charge, and when unplugged it automatically dies. When plugged in the battery indicator is green and the top right corner of the screen says "Not charging". I left town for a week with the laptop off and I came back in town and it won't charge. What can I do to fix this?

    If you are under warranty call Apple and get a case number. 

  • My MacBook Pro persistently will not connect to my wireless router. The message "connection timeout" appears. What is a connection timeout and how can I fix?

    My MacBook Pro persistently will not connect to my MiFi Verizon wireless router. The message "connection timeout" appears. What is a connection timeout and how can I fix?

    Hi there terri900!
    You may want to try configuring your router settings to match the recommended settings for iOS and OS X devices, which can be found here:
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/ht4199
    You may also find some helpful information for troubleshooting this issue in this article, which can help you with any manner of issues with Wi-Fi connections:
    Wi-Fi Quick Assist
    http://support.apple.com/kb/HT1145
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

Maybe you are looking for