Macbook pro 13" with After Effects and Twixtor

Hi
Can I have an information please..
For video ful HD, Adobe After Effects is ok on Apple Macbook pro 13" with Intel Core i5 dual-core 2,5GHz and 8GB of ram and Intel HD Graphics 4000 ???
I want use sometimes, no always... if the rendering time is more long there isn't problem..
but if the video shooting, tisi is a problem...
and AE with framework Twixtor for slowmotion... is it ok for macbook 13"?
look your news... thank you

thank you so muth for your reply
and.. my question is:
Macbook pro 13" with Intel Core i5 dual-core 2,5GHz with Turbo Boost 3,1GHz or max Intel Core i7 dual-core 2,9GHz with Turbo Boost 3,6GHz
and 8GB of ram and Intel HD Graphics 4000 runs AE just fine ????

Similar Messages

  • After some advice, I am new to Apple and looking to purchase either the MacBook Air 13inch with 256GB and 8GB mem or the MacBook Pro 13inch with retina 256Gb and 8GB mem. I am an assistant principal in a primary school and also studying my masters

    After some advice, I am new to Apple and looking to purchase either the MacBook Air 13inch with 256GB and 8GB mem or the MacBook Pro 13inch with retina 256Gb and 8GB mem. I am an assistant principal in a primary school and also studying my masters at university. I don't play computer games and I don't watch movies. I do store photos and videos of my kids and music on iTunes. I also like browsing the net with numerous windows open, check email etc. I am really wanting long battery life as I do a lot of my work on the couch - not close to a PowerPoint. Would the air do the trick or will it soon be outdated as Apple move towards retina display? Both air and pro seem very thin  - almost the same? And not much difference in weight either so both very portable which is also a necessary requirement. Just can't help dreaming about that 12 hour claimed battery life. Any helpful advice/opinions, very much appreciated. Thanks

    It's not likely that you'll get 12 hours in reql life. Those benchmarks are set under very strict controlled conditions. Kind of like mileage per gallon claims on cars. If 16GB of ram is an option at all I'd highly recommend you get that. As far as storage 256GB isn't alot, consider storing some things on an external thunderbolt real

  • My Macbook crashed yesterday, with After Effects on it. I bought a new one, but how can i re-install After Effects, without buying it again?

    My Macbook crashed yesterday, with After Effects on it. I bought a new one, but how can i re-install After Effects, without buying it again? I logged in to my creative cloud-account, but i can't find the program or the order of the program in my history...

    Download CS6 products
    Contact support to reset activations. For anything beyond that we will need proper technical info - exact system, exact program versions and so on.
    Mylenium

  • Macbook Pro Freezes with Screen Distortion and other problems...

    So I've had my 13' Macbook Pro for about 9 months and I am encountering problems with it. My Macbook would sometimes freeze at random and the screen would distort as well, also, the screen would react whenever I would move the laptop around by either reverting back to a normal screen (still frozen) or more distortion which leads me to believe that it might have something to do with the hardware. But all this is temporarily solved when I force shut off my laptop (hold the power button for 3 seconds) and restart it. It can start up again with no problem, but this happens again, more early than usual and becomes more consatnt. However this is lessened whenever I don't use my laptop for an extended amount of time, but it does happens again whenever I do use it for some time.
    Another problem I've been encountering is that, at times after I force shut off the laptop, my computer would not turn back on. Instead, the laptop beeps 3 times, pause, then beep 3 times again. I have looked into this and discovered that this means that I have "No Good Banks"..........I have no idea what this means but I guess it means that I might have faulty RAM.
    What I ask is that if anyone has had similar problems and if they know what to do or what exactly what the problem is so that I might be able to do something about it.
    Info about Macbook:
    Processor 2.5 GHz Intel Core i5
    Memory: 4GB 1600 Mhz DDR3

    Bump. Anyone have any ideas on this?
    I "shut it off" last night, but when I turned it on again tomorrow, it turned out it didn't quite shut down?
    It booted to the grey log-in screen, basically.
    I've also come to the realisation that my charger isn't registered (the LED isn't orange/green like it usually is), and I can't get a "battery status" (I'm sure it has another name, I just don't know what it is) when I click on the little button on the left hand side of the laptop. Usually, it would show green dots/LEDS to tell me how far along it's charged, but now I get nothing.
    I get the distinct feeling something's up with my battery, and maybe my RAM (because of the repeated triple beep after shutting down last night).

  • Premiere pro working with after effects

    Dear All,
    I have an 'off line media' problem that I can create every time.(cs5)
    This is what I do:
    1. Create a after effects composition
    2. Create a premier pro project
    3. IMport the AE at 1 above into the bin
    4. Drop the comosition onto the timeline
    5. Playback, all is ok
    6. Save and close
    7. Open Premier pro again
    The After effects composition on the timeline is red and marked media offline.
    The media is not offline and have confirmed in windows explorer. In fact all files are on the same HD
    I havent renamed,moved or deleted obvoiusly
    I can delete and re-add but thats silly evfery time I start PPro
    Whats happening?
    Regards
    Chris Anderson

    Dynamic Link has slowly gotten better and less... umm... forgetful. In my experience, it was randomly flaky in CS5 without much rationale.
    Don't delete and re-import the DL'ed comp; instead, just select the offline comp footage item in the Project Panel, right-click, and select Link Media. In the dialog, navigate to your AE comp, and Pr should automatically reconnect to the proper comp.

  • Using Adobe Media Encoder with After Effects and ExtendScript

    Hi,
    I'm trying to automate the process of encoding a video using the Adobe Media Encoder. The project I'm working on includes allowing a user to upload a video and having that video then be encoded in different formats. I'm very new to After Effects and ExtendScript, but the two ways I see of doing this are:
    1) Use ExtendScript to fire the Adobe Media Encoder through After Effects, using the 'Add to Adobe Media Encoder Queue' function. I'm not sure if this is possible or not.
    2) Bypass After Effects all together and use the 'watch folder' function in Adobe Media Encoder and upload the files directly to that folder.
    I'd prefer to go route 1, if that's possible, but I'm not sure it is. I was thinking that I could write a script to work with Adobe Media Encoder to encode a given video, but from what I've read, ExtendScript isn't currently supported by Adobe Media Encoder? This is true? What would be the best way to go about accomplishing this?
    Thanks.

    I think you will have a much easier time just using option 2. I have to ask, why do you want the files to go through After Effects anyway? If you are just taking a file and converting it to ## different formats...the watch folder setup in AME would be super easy to setup.
    All you need to do is ensure the user submitted files end up in a certain directory -- make that folder your watch folder and create a second folder within that one called 'encoded' or something along those lines. That way as long as AME is online and watch folders are active....you won't have to do a thing.

  • MacBook Pro hanging with blue screen and spinner after installing Software Update

    Hi I was wondering if someone could help me with this current issue. Just a few hours ago I finished reinstalling Mac OS X Snow Leopard in my MacBook Pro. I performed a clean installation as part of a yearly spring cleaning that I do on all my systems to keep them optimized. So there was I downloading some software updates which included the combo update of OSX 10.6.8 and others. The updates finished downloading and the system logged out to install the updates, when the updates finished installing my MacBook proceeded by logging out into a blue screen and show a gray spinner similar to the one seen when you start your Mac. Here's the problem after 2 hours the system is showing the spinner and the blue screen, I think that my computer has just hanged in the reboot process.
    I was wondering what should I do? Do a force restart? Or leave it overnight?
    Also, where can I find any information on what error is causing this issue?
    I appreciate your responses and help.
    By the way, I installed Mac OS X from a USB stick that has the original image of the disk installer that came bundled with my computer.

    Kappy wrote:
    Force a shutdown. Do not restart yet, but first do the following:
    Repair the Hard Drive
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Next, boot into Safe Mode then restart normally.
    Hi Kappy,
    Checked the hard drive after forcing a shutdown and booting from my Snow Leopard Installer USB Key and the status of the HDD says "Verified". I ran the repair and the volume was repaired successfully. Clicked on "Verify Disk" and it says "Macintosh HD appears to be OK". So I ran a second repair and again no errors were reported.
    As suggested I booted back again in Safe Mode and restarted normally. All software appears to have been installed successfully. But I don't understand why my computer hanged and showed the spinner after installing the updates in the blue screen that appears just before rebooting. I am aware that the system shows that spinner after a OS update but the longest it lasts is 30 seconds at the most in my previous cases.

  • Problem with After Effects and Yosemite

    I have CS5 and I have installed OS X Yosemite and now using the eyedropper in Keylight (1.2) makes After Effects crash and with Ultra Key in Premiere Pro, the eyedropper just don’t work.  I have removed and reinstalled both programmes and it didn’t help. I also failed to update the programs after installation. Anyone who knows something about this?

    Thanks for all the great response!
    My graphics card has 512 MB of vram. with 200 mb allocated to After Effects (it was the default, can it be safely increased?)
    I'm running 2560 x 1024 (two 19 inch monitors in horizontal span mode). but deactivating a screen and restarting doesn't make a difference (1280x1024).
    as for visual styles, I only had the default windows xp theme, but switching the the classic windows 2000/98 look didn't make a difference, even after rebooting.
    I'll contact technical support right away! But any suggestions anyone might have are still much appreciated!
    Once again thanks for the replies!
    Christopher OShea
    EDIT: forgot to add, about video drivers, I'm using the latest yes. I've also tried the one just before the latest. And I'll have till tommorow with technical support since they're closed now, bummer ):
    Another edit: heres something interesting, I turned hardware acceleration in display settings off completely. This fixed the problem.
    The only problem is, now I have no hardware acceleration at all, giving me close to no performance at all in pretty much anything. Obviously After Effects doesn't run well like this.
    But at least this makes it almost certain that the problem is related to the graphics card.

  • Macbook pro 2014 with ASUS PB287Q and SAMSUNG U28D590D

    Hi
    I was wondering if my new macbook pro 15" 2014
    2.5GHz Quad-core Intel Core i7
    16GB 1600MHz DDR3L SDRAM
    512GB Flash Storage
    Intel Iris Pro Graphics+Nvidia GT750m 2GB
    will work with the ASUS PB287Q 4K or the samsung U28D590D?
    I read that if u connect it with HDMI you only get 30Hz, is there a way to get 60Hz with the macbook pro?
    They both have a displayport port.
    Thanks

    I just hooked up my ASUS pb287q and downloaded SwitchResX.  It took some playing around but now I'm getting near perfect retina (2x) resolution.  First choose "Scaled" under the 'display' tab then switch over to SwitchResX and go to the  'current resolution' scroll down to the bottom and select 1280x720, 60hz (HiDPI).  This will give you the retina quality.  It's really big but remember it's twice the resolution of 1280x720. 
    If it's too big for you, you can play around the other resolutions, but this is the setting I would recommend.
    I tested this in Adobe Photoshop CS (uses retina standard) and opened a document that was 2572x5760, it fit perfectly at 100% zoom.
    I'm using a displayport 1.2 and a HDMI 1.4 4k cable.  links provided below. 
    http://www.amazon.com/gp/product/B00F90H77A/ref=oh_aui_detailpage_o03_s00?ie=UTF 8&psc=1
    http://www.amazon.com/gp/product/B00NBGCX00/ref=oh_aui_detailpage_o02_s00?ie=UTF 8&psc=1

  • Macbook pro dock - with ext hd and ext dvd burner and cooling fans needed??

    why doesn't anybody make these? I could have a 1 terabyte HD, dvd burner and cooling fans to keep the macbook pro cool enough to touch while playing wow, or editing video. It could also be made of aluminum and look great. Oh and it has to be configurable to allow use of any 15" macbook pro(ie, bookends units are different because new models include firewire 800)

    Welcome to Apple Discussions!
    Do you have iStatPro? You can download it from the Apple site and see what it is that is running so hot. Under the low usage you describe, the fans should be idling silently. And you might be able to tell what is getting so hot.
    If Activity Monitor doesn't show anything, then you might want to run the extended version of the Apple Hardware Test. It sounds like something is getting very hot. If there is a hardware problem, then you should get one or more error codes. The Apple Hardware Test is on Install Disc #1 of the gray discs that came with your Mac--you boot to it by holding down "D". Instructions are on the disc and on the screen.
    Also, be sure you have "All Processes" selected on the Activity Monitor. And the boxes at the bottom should be mostly black with very little red or green at 3.5% CPU usage. Given all the symptoms, I am surprised that there is not some process running amok in the background.
    Good luck!

  • My MacBook Pro very slow after restarting and can't open some programs

    One day I was using my Mac pro everything was fine until I restarted it, now I can't open any downloaded programs like google chrome and activity monitor crashes when I open it. I get beach ball of death by dong simple things like typing and clicking a link, and sometimes when i put it to sleep the fan is still on for a minute but the apple light is off and when I turn it on sometimes I get a blue screen

    Maybe you need to provide more information?
    What model MacBook Pro do you have?
    What version MacOS X?
    Do you have any aftermarket add-ons? e.g. an added SSD?
    What have you done so far to diagnose the problem?
    e.g. Have you scanned your hard disk for errors with Disk Utility?

  • Energy usage (watt) of MacBook Pro 2010 with 8GB Ram and i7

    I think of buying a MacBook Pro with 8GB, i7
    (and SSD, but that's not important because it consumes less than HDD)
    What is the energy consumption (in Watt) in idle state with display on under
    1) OSX
    2) Win7 (I need this for my job)

    Well, I need a computer professionally. At least now.
    But I want to keep my environments impact at a minimum.
    So I need precise data to evaluate what I do:
    money is one thing, because it's usually very finite,
    but even more important is recyclability, energy, ...:
    10 Watts difference (e.g. for 8GB instead of 4GB?)
    will yield, over mac lifetime of say 10 years (the laptop
    im am currently typing on is 8+ years old, but is slowly
    going towards being obsolete, even with ISA SSD upgrade):
    10 h/d * 365 d/y * 10 W * 10 y = 365000 Wh = 365kWh.
    I try to save energy, so this is approx my direct energy usage
    of 1 year (I have no car, do not fly, have no refrigerator,
    do not heat my appartement above 10 deg Celcius, ...
    but strangely I have a computer and I am a programmer ...).
    For me, it's important. It is relevant for my decisions:
    5 Watts? I will be tempted by 8GB. 10 Watts? I don't know.
    (I do setup work, so I use VMs a lot, so I need quite some
    memory for that ...).

  • New MacBook Pro appearing with Iphoto, Imovie and Iweb all 2008 versions

    I bought a MacBook Pro in March 2013 (new from best buy) and it's running os x 10.8.4. However, for some reason the Iphoto, Imovie and Iweb are all 2008 versions. I used an external hard drive to transfer from my old macbook to the new macbook. What went wrong? Why wasn't the new version of Iphoto, Imovie and Iweb on my computer?
    Should I back up onto my external again and reinstall? I had a lot of trouble transfering the data over in the first place because some security software from my school was messing with the transfer, however once it was deleted everything went smoothly. Thoughts?

    You migrated your files from an older computer. If you migrated apps, iLife applications were transferred, so you have an old iLife edition.
    The only thing you have to do is to open Finder, choose Applications in the sidebar and delete iLife apps. Then, open the App Store, go to Purchases tab and download iLife applications free of charge. All Macs come with iLife applications free of charge

  • MacBook Pro rejecting CD after spin and few noise.

    It was working fine a few months ago but when I tried to read a CD from my MBP, it rejects it after spining for 1-3 times and then rejects the CD without reading it. Any solution for this, I really don't want to pay to get it fixed if it is something I can do myself. I upgraded the newest update recently, I'm thinking this could be the cause as the same Cd works perfectly fine on my IMac.
    Any advice would be really appreciated.
    Thanks Guys!

    Make sure CDs & DVDs and iPods is selected in Finder > Preferences > General
    And check your settings in System Preferences > CDs & DVDs
    Make sure discs are free of fingerprints and dust otherwise the optical drive may not be able to read the disc.
    How to Clean a CD | Electronics

  • Is there an easier way to work with adobe after effects and final cut pro x

    I use adobe after effects and I am thinking about deleting motion and compressor ( I can always install again). If you have a good reason to keep those apps let me know because I don't want to be hasty. If I delete them and stick with after effects and final cut pro...  Is there a secret to easy working between FCPX and adobe after effects?
    Thanks

    You'll go from FCP X to and from Motion a lot easier than AE.  Motion does pretty much anything AE does, most of the time faster and easier.  Without Motion, you can't do custom templates.  You can't customize the encoding of files without Compressor.  Why would you want to remove them from your system?  Leave them, use AE if you want along side of them.  But I'd learn Motion first.  Cause AE doesn't read FCPXML, so going back and forth between them is a PITA.
    And until Apple releases the round trip between FCP X and Motion fully, we have this gem:
    http://www.alexnking.com/2012/02/20/fcpx-send-to-motion-app/

Maybe you are looking for