MacBook Pro 15.4 inch display 8gb memory and 750 gb hard drive?
I wanted to know if the MacBook Pro 15.4 inch display 8gb memory and 750 gb hard drive would be a good computer for ease of use, fast Internet connections, good graphics, good memory, and some gaming. Maybe one or two games
that works.......
as for the fast internet connection - that all depends on the service plan you have with your ISP.
Similar Messages
-
I have the MacBook Pro (retina, 13 inch, Mid 2014) Memoria 8GB 1600 MHz DDR3 and I want to increase the memory. What kind of memory do I have to buy?
The RAM in the retina model can not be upgraded.
-
I have a macbook pro 2.4 ghz intel core 2 duo 2010 13" aluminum with 8gb of memory and a 250gb hard drive running version 10.6.8 with safari 5.1.4. Safari will open up intermittently on its own. System preferences and the dock isn't set up to start safari. Can't figure out why this is happening. Had reloaded system from scratch and noticed this happening lately.
Remove iAntiVirus, then reboot, see if it's better.
-
i am buying a new macbook pro but i want to fit my own ram memory and solid state hard drive , will apple permit this without voiding the waranty.
yes you can do it and not void the warranty. Those are the only hardware changes that Apple permits. Instructions on how to upgrade the ram and remove and replace the hard drive are even included in the owners manuals for MacBook Pros.
-
What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro? I need to transfere files from the old hard drive to the new computer.
No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2? -
I Recently updated the software on my MacBook Pro. Now, my computer no longer recognizes my external hard drive. Could this be related to the software update and, if so, how do I correct the problem?
Ari343 wrote:
No, the external hard drive does not show up on Disk Utility. I don't have another computer to try it on.
Perform a PRAM reset:
http://support.apple.com/kb/ht1379
Have you tried all the ports?
Have you tried with a different cable?
Have you tested all the ports with other devices to see that they are functioning?
Ciao. -
I have a macbook pro. I had iphoto on it prior to my hard drive crashing. Hard drive was replaced but iphoto is no longer on. How do I get it back without paying for it?
Have you tried
http://support.apple.com/kb/HT4928 -
whats the best way to transfer everything from my old macbook pro to a new mac mini, i have a external hard drive which i backup to regularly via time capsule
Check out > OS X Lion: How to use Migration Assistant to transfer files from another Mac
-
I have a 15" MacBook Pro with Mountain Lion installed. I have partitioned the hard drive into two partitions. Is it possible to install Snow Leopard on the second partition? If so how do I do it?
If your MacBook Pro had Snow Leopard on it at one time then sure. (Early 2011 or earlier)
How to erase and install Snow Leopard 10.6
Obviously choose the second partition to install into. It has to be OS X Extended journaled formatted in Disk Utility (BootCamp software makes it a MSDOS/FAT32 formatted partition if you used that to partition with)
If it's a Early 2011 or Late 2011 that came with 10.7, it's possible, but it's not easy.
https://discussions.apple.com/thread/3264421?start=0&tstart=0
If you can't install Snow Leopard, there is a thread over at MacRumors how to run Snow Leopard in a virtual machine program under 10.7 or 10.8 -
Hi, I bought the macbook pro 15 3 months ago. I wanna upgrade the hard drive to 128G ssd drive. How much I should paid?
Qingfeng wrote:
Hi, I bought the macbook pro 15 3 months ago. I wanna upgrade the hard drive to 128G ssd drive. How much I should paid?
Well you won't have very much storage capacity with a SSD that small, also SSD has limited writes, so it wouldn't be good for on-loading and off-loading a lot of files.
SSD isn't being securely erased due to steps to prevent their premature wear, so despite what you do in Disk Utility Secure Erase, your confidential data can still be recovered if you pass the machine on to someone else for instance.
Other than those reasons, small SSD's can be extremely fast, loading your programs and OS much faster. But the real benefit in high speed storage is transfering large amounts of files on/off the computer to ANOTHER fast device. This comes in handy for video and large music collections and so forth.
Since the SSD because of it's limited writes doesn't fit the bill as a large file transfer medium.
If you want to get a SSD drive, you can upgrade it yourself simply by ordering one online at locations like Other World Computing or NewEgg and have a 00 micro phillips head screwdriver handy.
There are instructions over at iFixit for opening your MacBook and replacing the hard drive with the SSD.
Preferably you will want to clone your present boot drive to a external drive using Carbon Copy Cloner, then making the switch and hold option to boot from the clone and then clone from the external to the new internal SSD drive.
Prices of SSD are varied, Apple won't replace it for you
This is currently the fastest SSD availalbe
http://www.harddrivebenchmark.net/hdd.php?hdd=OCZ-VERTEX3+MI -
Macbook pro Late 2013 retina display battery questions and issues
Hi,
So I was a bit suspicious about my macbook pro 2013 13 inch retina display models battery, its the latest macbook pro 13 inch. The website says that it will last for 9 hours but mines lasted for only 6.19 hours. All the apps I used were probably Xcode (doing coding projects), Photoshop, Safari and Notes. I did keep the brightness high and also had bluetooth on for a while. Is this a good battery life for my mac or should I go back to the Apple Store and tell them to fix my battery?
I have all the battery logs below:
Standby Time: 1:13 PM
Battery Percent: 90%
Usage Time Starting: 3:10 PM Battery Percent: 87%
Usage Time Ending: 4:01 PM Battery Percent: 75%
Apps Used: Safari, Notes, Xcode,
Usage Time Starting: 5:00 PM Battery Percent: 74%
Usage Time Ending: 5:56 PM Battery Percent: 64%
Apps Used: Safari, xcode
Usage Time Starting: 6:53 PM Battery Percent: 63%
UsageTime Ending: 7:19 PM Battery Percent: 57%
Apps Used: Safari
Usage Time Starting: 7:46 PM Battery Percent: 56%
Usage Time Ending: 9:02 PM Battery Percent: 40%
Apps Used: Photoshop, Safari, xcode
Day 2:
Usage Time Starting: 10:56 AM Battery Percent: 38%
Usage Time Ending: 11:09 AM Battery Percent: 39%
Apps Used: Safari
Usage Time Starting: 12:09 PM Battery Percent: 36%
Usage Time Ending: 12:14 Battery Percent: 35%
Apps Used: Photoshop, Safari
Usage Time Starting: 12:42 PM Battery Percent: 35%
Usage Time Ending: 3:06 Battery Percent: 4%
Apps Used: Photoshop, Safari
Bluetooth also added using mouse
I wasn't using it for one day straight by the way, I used it for 2 days without charging with these logs.Fayk1,
carefully review that Web site’s claim; under what conditions does it claim that a charge would last for up to nine hours? (Note those key words — “up to”.) Did your conditions exactly match those conditions? If you want a charge to last as long as possible, then make the display as dim as you can stand it, and minimize your use of Bluetooth and energy-hungry apps like Photoshop and Xcode compilers. To maximize the battery’s life, start recharging it when it gets down to 20%. -
Can the MacBook Air be backed up using Clone softward and an external hard drive?
I want to find the best way for a new college student to back up her MacBook Air files. Can she use cloning software and an external hard drive? I'm unclear if the Air supports attaching an external hard drive.
The computer should be cloned using Disk Utility, so no additional software is required. However, it's preferable to incrementally update the clone using backup software. I would recommend using one of the following. They each have different capabilities and features. Each can be used for a free trial period. My personal preference is Carbon Copy Cloner. All of them can make and maintain bootable clones.
Suggested Backup Software
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
Clone Mavericks, Lion/Mountain Lion using Restore Option of Disk Utility
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
1. Select Disk Utility from the main menu then press the Continue
button.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag it
to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
An excellent source of external drives is OWC. -
I have a MacBook Pro that I want to hook up the Mini Display Port video out to a TV with RCA video imput, or a TV with S-video iimput.
How do I do this, and do I need a video converter?
Dennisthere's an adaptor for mini dvi to s-video
a well known auction site would yield results if apple don't stock it -
My Macbook pro Retina 15 inch (2011) keeps freezing and rebooting out of no where.
This is the code that pops up please help me!
Anonymous UUID: 1DCA0D36-FFEF-A2B1-8C58-12173532A8D1
Fri Apr 4 16:49:09 2014
Panic(CPU 4): NMIPI for spinlock acquisition timeout, spinlock: 0xffffff80368a4568, spinlock owner: 0xffffff80375e39e0, current_thread: 0xffffff80375e39e0, spinlock_owner_cpu: 0x4
RAX: 0x0000000000000000, RBX: 0x0000000000000000, RCX: 0xffffff803edd4b58, RDX: 0xffffff803edd4b58
RSP: 0xffffff81132fbd00, RBP: 0xffffff81132fbdb0, RSI: 0xffffff803edd4b90, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x000000000000039b, R10: 0x0000000000000000, R11: 0xffffffffffffffff
R12: 0x0000000000000000, R13: 0xffffff803edd4b48, R14: 0xffffff80368a4560, R15: 0xffffff80368a4560
RFL: 0x0000000000000246, RIP: 0xffffff80207c3ee4, CS: 0x0000000000000008, SS: 0x0000000000000010
Backtrace (CPU 4), Frame : Return Address
0xffffff810a3c6f50 : 0xffffff80204e1ed1
0xffffff810a3c6f80 : 0xffffff80204db3ef
0xffffff810a3c6fd0 : 0xffffff80204f34e9
0xffffff81132fbdb0 : 0xffffff80207c3ce7
0xffffff81132fbe20 : 0xffffff80207c342b
0xffffff81132fbf30 : 0xffffff80207c2fa4
0xffffff81132fbf60 : 0xffffff802083e0a7
0xffffff81132fbfb0 : 0xffffff80204f3818
BSD process name corresponding to current thread: esets_proxy
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide: 0x0000000020200000
Kernel text base: 0xffffff8020400000
System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
System uptime in nanoseconds: 7634137823907
last loaded kext at 245050792457: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7fa2816000, size 65536)
last unloaded kext at 305515983316: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7fa2816000, size 57344)
loaded kexts:
com.eset.kext.esets_kac 600.00.91f01
com.eset.kext.esets_pfw 600.00.91f01
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.3f10
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 2.6.0f1
com.apple.driver.AppleHDA 2.6.0f1
com.apple.driver.AGPM 100.14.15
com.apple.driver.ApplePlatformEnabler 2.0.9d1
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.GeForce 8.2.4
com.apple.driver.AppleIntelHD4000Graphics 8.2.4
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMuxControl 3.4.35
com.apple.driver.AppleIntelFramebufferCapri 8.2.4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleThunderboltIP 1.1.2
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.5.1
com.apple.driver.AppleUSBHub 666.4.0
com.apple.driver.AppleSDXC 1.5.2
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleAHCIPort 3.0.0
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleUSBXHCI 670.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.6.0f1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.5fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOAcceleratorFamily 98.14
com.apple.nvidia.driver.NVDAGK100Hal 8.2.4
com.apple.nvidia.driver.NVDAResman 8.2.4
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleGraphicsControl 3.4.35
com.apple.iokit.IOAcceleratorFamily2 98.14
com.apple.AppleGraphicsDeviceControl 3.4.35
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.3f10
com.apple.driver.AppleSMC 3.1.8
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.driver.IOPlatformPluginFamily 5.7.0d10
com.apple.driver.AppleHDAController 2.6.0f1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOHDAFamily 2.6.0f1
com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
com.apple.driver.AppleUSBMultitouch 240.9
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.driver.AppleThunderboltNHI 2.0.1
com.apple.iokit.IOThunderboltFamily 3.2.7
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IO80211Family 630.35
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBFamily 675.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
panic(cpu 6 caller 0xffffff80207c4685): "Spinlock acquisition timed out: lock=0xffffff80368a4568, lock owner thread=0xffffff80375e39e0, current_thread: 0xffffff8035380450, lock owner active on CPU 0x4, current owner: 0xffffff80375e39e0"@/SourceCache/xnu/xnu-2422.90.20/osfmk/i386/locks_i386.c:365
Backtrace (CPU 6), Frame : Return Address
0xffffff81141e3650 : 0xffffff8020422fa9
0xffffff81141e36d0 : 0xffffff80207c4685
0xffffff81141e3710 : 0xffffff802081b0c6
0xffffff81141e3750 : 0xffffff80206d5a34
0xffffff81141e3b90 : 0xffffff80206c88c6
0xffffff81141e3be0 : 0xffffff80206c8bc2
0xffffff81141e3dc0 : 0xffffff80206b6d2d
0xffffff81141e3de0 : 0xffffff8020652763
0xffffff81141e3e10 : 0xffffff8020633b3e
0xffffff81141e3eb0 : 0xffffff802062b20c
0xffffff81141e3f60 : 0xffffff8020632a29
0xffffff81141e3fb0 : 0xffffff80204d6ff7
BSD process name corresponding to current thread: kernel_task
Model: MacBookPro10,1, BootROM MBP101.00EE.B02, 4 processors, Intel Core i7, 2.3 GHz, 8 GB, SMC 2.3f36
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 1024 MB
Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.3f10 13477, 3 services, 15 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM256E, 251 GB
USB Device: Hub
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Razer Mamba
USB Device: Razer DeathStalker
Thunderbolt Bus: MacBook Pro, Apple Inc., 23.4Uninstall ESET by following these instructions. If you have a different version of the product, the procedure may be different.
Back up all data before making any changes. -
Brand new Macbook PRO Retina 15inch. (1 day old) Running 10.9
EFI 1.2 installed.
Keyboard/trackpad hangs when using the left USB.
The EFI update 1.3 apparently fixes this issue for the 13inch macbook pro.
I have a 15inch macbook pro. The EFI update 1.2 does not resolve this issue for me.
Whenever I plug something into the left USB, after the 2nd or 3rd time, the keyboard and trackpad become unresponsive. To get the keyboard/trackpad back again, I must restart the machine.
This is what the consol says:
Nov 12 11:29:56 leaf kernel[0]: AppleUSBMultitouchDriver::_deviceSetReport - DeviceRequest returned error 0xe000404f (interface 1, reportID 0xac, payload 2
Nov 12 11:29:56 leaf kernel[0]: AppleUSBMultitouchDebug: _deviceSetReport returned an error in configureDataMode
Nov 12 11:29:56 leaf kernel[0]: AppleUSBMultitouchDriver::_deviceSetReport - DeviceRequest for reportID 0xac returned with result 0xe000404f - retrying
I cannot install the EFI update 1.3 as I get an alert "This software is not supported on your system." I assume because it was made only for the 13inch.
Is this a hardware or firmware issue? If it's only firmware, why does this issue only affect some users? If it's hardware, should I just return this macbook?I can reproduce the behavior at will. I just have to plug in the tablet on the left USB board, reboot the tablet, disconnect the cable and reconnect. At that moment the trackpad and keyboard will both freeze.
This is the complete sequence of console logs I have
20/11/13 22:58:38,000 kernel[0]: considerRebuildOfPrelinkedKernel prebuild rebuild has expired
20/11/13 22:58:38,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=544[ksadmin] final status 0x0, allow (remove VALID)ing page
20/11/13 22:58:38,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=550[ksadmin] final status 0x0, allow (remove VALID)ing page
20/11/13 22:58:38,000 kernel[0]: AppleUSBMultitouchDriver::message - kIOUSBMessagePortHasBeenReset.
20/11/13 22:58:38,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=551[ksadmin] final status 0x0, allow (remove VALID)ing page
20/11/13 22:58:38,000 kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
20/11/13 22:58:38,915 hidd[71]: MultitouchHID: device bootloaded
20/11/13 22:58:40,401 WindowServer[105]: disable_update_timeout: UI updates were forcibly disabled by application "Trasferimento file Android" for over 1.00 seconds. Server has re-enabled them.
20/11/13 22:58:40,957 WindowServer[105]: common_reenable_update: UI updates were finally reenabled by application "Trasferimento file Android" after 1.56 seconds (server forcibly re-enabled them after 1.00 seconds)
20/11/13 22:58:52,000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xb400 ****
20/11/13 22:58:58,187 sandboxd[556]: ([177]) mds_stores(177) deny file-read-data /private/var/root/Library/Preferences/.GlobalPreferences.plist
20/11/13 22:58:58,393 com.apple.IconServicesAgent[303]: main Failed to composit image for binding VariantBinding [0x1e3] flags: 0x8 binding: FileInfoBinding [0x2ed] - extension: jpg, UTI: public.jpeg, fileType: ????.
20/11/13 22:58:58,394 quicklookd[558]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: jpg, UTI: public.jpeg, fileType: ???? request size:128 scale: 1
20/11/13 22:58:58,454 com.apple.IconServicesAgent[303]: main Failed to composit image for binding VariantBinding [0x1e5] flags: 0x8 binding: FileInfoBinding [0x345] - extension: pdf, UTI: com.adobe.pdf, fileType: PDF .
20/11/13 22:58:58,455 quicklookd[558]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x403] flags: 0x8 binding: FileInfoBinding [0x303] - extension: pdf, UTI: com.adobe.pdf, fileType: PDF request size:128 scale: 1
20/11/13 22:58:58,457 com.apple.IconServicesAgent[303]: main Failed to composit image for binding VariantBinding [0x1e7] flags: 0x8 binding: FileInfoBinding [0x2ef] - extension: txt, UTI: public.plain-text, fileType: ????.
20/11/13 22:58:58,457 quicklookd[558]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x603] flags: 0x8 binding: FileInfoBinding [0x503] - extension: txt, UTI: public.plain-text, fileType: ???? request size:128 scale: 1
20/11/13 22:58:58,518 com.apple.IconServicesAgent[303]: main Failed to composit image for binding VariantBinding [0x1e9] flags: 0x8 binding: FileInfoBinding [0x347] - extension: pdf, UTI: com.adobe.pdf, fileType: ????.
20/11/13 22:58:58,519 quicklookd[558]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x803] flags: 0x8 binding: FileInfoBinding [0x703] - extension: pdf, UTI: com.adobe.pdf, fileType: ???? request size:128 scale: 1
20/11/13 22:59:06,399 Console[561]: setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored.
20/11/13 22:59:53,000 kernel[0]: AppleUSBMultitouchDriver::message - kIOUSBMessagePortHasBeenReset.
20/11/13 22:59:54,000 kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
20/11/13 22:59:54,099 hidd[71]: MultitouchHID: device bootloaded
20/11/13 23:00:06,000 kernel[0]: AppleUSBMultitouchDriver::message - kIOUSBMessagePortHasBeenReset.
20/11/13 23:00:06,000 kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
20/11/13 23:00:06,659 hidd[71]: MultitouchHID: device bootloaded
20/11/13 23:00:32,000 kernel[0]: AppleUSBMultitouchDriver::message - kIOUSBMessagePortHasBeenReset.
20/11/13 23:00:45,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=575[ksadmin] final status 0x0, allow (remove VALID)ing page
20/11/13 23:00:46,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=581[ksadmin] final status 0x0, allow (remove VALID)ing page
20/11/13 23:00:46,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=582[ksadmin] final status 0x0, allow (remove VALID)ing page
20/11/13 23:00:46,000 kernel[0]: AppleUSBMultitouchDriver::message - kIOUSBMessagePortHasBeenReset.
20/11/13 23:00:46,000 kernel[0]: AppleUSBMultitouchDriver::message - kIOUSBMessagePortHasBeenReset.
20/11/13 23:00:46,000 kernel[0]: AppleUSBMultitouchDriver::message - kIOUSBMessagePortHasBeenReset.
20/11/13 23:01:33,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=588[ksadmin] final status 0x0, allow (remove VALID)ing page
20/11/13 23:01:33,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=594[ksadmin] final status 0x0, allow (remove VALID)ing page
20/11/13 23:01:33,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=595[ksadmin] final status 0x0, allow (remove VALID)ing page
20/11/13 23:01:33,000 kernel[0]: AppleUSBMultitouchDriver::message - kIOUSBMessagePortHasBeenReset.
20/11/13 23:01:34,000 kernel[0]: AppleUSBMultitouchDriver::message - kIOUSBMessagePortHasBeenReset.
20/11/13 23:01:38,604 WindowServer[105]: disable_update_timeout: UI updates were forcibly disabled by application "Trasferimento file Android" for over 1.00 seconds. Server has re-enabled them.
20/11/13 23:01:39,393 WindowServer[105]: common_reenable_update: UI updates were finally reenabled by application "Trasferimento file Android" after 1.79 seconds (server forcibly re-enabled them after 1.00 seconds)
20/11/13 23:01:48,000 kernel[0]: AppleUSBMultitouchDriver::_deviceSetReport - DeviceRequest for reportID 0xac returned with result 0xe0004051 - retrying
20/11/13 23:01:48,000 kernel[0]: AppleUSBMultitouchDriver::_deviceSetReport - DeviceRequest for reportID 0xac returned with result 0xe000404f - retrying
20/11/13 23:01:48,000 kernel[0]: AppleUSBMultitouchDriver::_deviceSetReport - DeviceRequest for reportID 0xac returned with result 0xe000404f - retrying
20/11/13 23:01:48,000 kernel[0]: AppleUSBMultitouchDriver::_deviceSetReport - DeviceRequest returned error 0xe000404f (interface 1, reportID 0xac, payload 2
20/11/13 23:01:48,000 kernel[0]: AppleUSBMultitouchDebug: _deviceSetReport returned an error in configureDataMode
20/11/13 23:01:48,000 kernel[0]: AppleUSBMultitouchDriver::_deviceSetReport - DeviceRequest for reportID 0xac returned with result 0xe000404f - retrying
20/11/13 23:01:48,000 kernel[0]: AppleUSBMultitouchDriver::_deviceSetReport - DeviceRequest for reportID 0xac returned with result 0xe000404f - retrying
20/11/13 23:01:48,000 kernel[0]: AppleUSBMultitouchDriver::_deviceSetReport - DeviceRequest returned error 0xe000404f (interface 1, reportID 0xac, payload 2
20/11/13 23:01:48,000 kernel[0]: AppleUSBMultitouchDebug: _deviceSetReport returned an error in configureDataMode
Disconnecting the tablet doesn't resolve the issue. A reboot does. I still have to try if the workaround posted by Apple for the MBP-13 Late 2013 (close the lid and reopen after a few minutes) would work here too.
Maybe you are looking for
-
I did not know how to restore 10.5.3.3 as one person suggested and there appears to be no support to do this that I could find. Has Apple fixed this problem for 10.6 yet?
-
Use the results of an SQL query to create another query
I am working on a bidding/allocation system using C# and MySQL, and I am currently having difficulty implementing the “post-allocation” mechanics of the system. Let me explain how it works, before introducing the code: When the bids are made on the s
-
How to build a project with no menu...?
Hi all...I am creating a DVD short and I want the DVD to just begin playing with no menu, or at the least, no "theme", just a basic menu. Any idea how to defeat the "Themes" in iDVD? Thanks!
-
when we create info object, there is a option about reference and template . what does mean by that? here is the screen shoot. http://xs.to/xs.php?h=xs322&d=07501&f=reference-template.jpg
-
Hi, I try to insert the values to the table the following error is coming "can't update while select is active in read-committed Mode" It is not Compilation Error and also there is no null values. Please give an idea wht is the exact problem Sorry fo