MacBook Pro 15' Core i7 Running Boot Camp Turns on in OSX fine, but in windows, whenever plug it in, the display goes black.

I have a 2011 MBP 15'. It has a core i7 2.4GHz 8gb of ram, and a HD 6750m. I rarely use Lion, I use Windows 7 Enterprise. I boot up my laptop and it turns on fine. Windows loads, but as soon as I plug the MagSafe adapter into the laptop, the display turns off.
Any ideas? I have already reset the SMC, and reset the PRAM and NVRAM. Neither worked.

Since you have a Mid2014 MBP, the USB should contain the Windows installer and BC drivers. Make sure your USB is a USB2 flash drive/disk. USB3 will fail.
There should be no hubs between the USB and the MBP and no other external peripherals connected to the Mac.
However at the last step when I click the "Install" button, my computer will restart and boot into OSX.
This indicates that the Mac cannot find the USB with Windows ISO and BC drivers.

Similar Messages

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

Apple only supports Windows on certain hardware.
http://www.apple.com/support/bootcamp/
Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
http://refit.sourceforge.net/
This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education.

After watching a youtube video in fullscreen on my Macbook pro, the display goes black and my laptop get stuck...

After watching a youtube video in fullscreen on my Macbook pro, the display goes black and my laptop get stuck...
And I need to reboot everything from the power button...
It's just the second time it happens. What it depends from?

Hello DarlinDodson,
I'd recommend taking a look through the following article that can help get your MacBook working with your TV again.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Allen

MacBook Pro Retina (Mid-2014) Cannot Boot Camp

Hi all,
I'm running OS X Yosemite (10.10.2) on my MacBook Pro Retina 13" (Mid 2014). I have tried to boot camp the machine but it's not working. After boot camp assistant has created the Windows 8.1 installation disk and saved all the drivers and software onto my thumb drive, it will then request for me to choose the size of the partition. However at the last step when I click the "Install" button, my computer will restart and boot into OSX. In Disk Utility the BOOTCAMP partition is there, but in System Preferences BOOTCAMP is not listed as a Startup Disk. I have tried to restart the computer while pressing the option key, and startup manager appears. However under startup manager only Macintosh HD is recognised and my BOOTCAMP partition or windows installation USB both do not appear. I have tried to create a partition manually in Disk Utility and open Startup Manager again to install windows from my thumbdrive, but again both thumbdrive and windows partition do not appear. Please help.
Thanks.

Since you have a Mid2014 MBP, the USB should contain the Windows installer and BC drivers. Make sure your USB is a USB2 flash drive/disk. USB3 will fail.
There should be no hubs between the USB and the MBP and no other external peripherals connected to the Mac.
However at the last step when I click the "Install" button, my computer will restart and boot into OSX.
This indicates that the Mac cannot find the USB with Windows ISO and BC drivers.

MacBook Pro 17" Will Not Install Boot Camp

Has anyone else found that Boot Camp will NOT install on a 17" MacBook Pro? We were able to partition the drive and install Windows but when we tried to install the Mac Drivers we kept getting the error message "this software will not install on your hardware". This is very frustrating as we bought the 17" specifically to run both Mac OSX and PC Windows. Has anyone got any ideas?

You may need to wait until Apple updates the drivers or you could try extracting them from the package then installing them that way

Will Macbook Pro Intel Core Duo run Snow Leopard ok?

I have the following system spec on my Macbook Pro which i bought in Apr 2006:
2.16 Ghz Intel Core Duo
2 G 667 Mhz SDRam
I would like to know if Snow Leopard will run on my system. I have been getting a few glitches for the last while when running internet related searches for certain sites like Youtube, and sometimes with streaming video. I figured that maybe i need a more up to date OS as i've been a bit slack with updating it. Any thoughts fromt he community are welcome

Yes. You can run Snow Leopard OK.
As you're starting from Tiger it's imperative you backup your current system before proceeding. That's best done by cloning it to an external HD using the Restore function in Disk Utility, or you can use third-party software such as CarbonCopyCloner or SuperDuper.
The reason for this is that although the installation should go smoothly with the installer replacing system files and leaving your user data and applications untouched, I have come across a couple that failed and could only be installed after erasing the Macintosh HD.
Buy the retail Snow Leopard disc; http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
and update to 10.6.8 with the combo installer; http://support.apple.com/kb/DL1399
Be aware that lots of software will need updating, not all of it for free (stand up, Adobe!), and you may well have difficulty getting drivers for older printers or scanners.
Ensure you select Rosetta from the optional installations to enable your older software to continue working.

My iTunes match on my MacBook Pro hasn't worked since Mountain Lion install. Tried Apple Tech but all their suggestions didn't solve the issue. Guess I will try them again on Monday. Clearly this is a common problem and a Mountian Lion conflict issue.

iTunes match hasn't worked since Mountain Lion install. Cloud icon keeps striking~ off. Won't upload new tracks to iTunes match. Just the eternal circle of step one, two, freeze....then tries again but never gets completed. Worked fine before Mountain Lion. Apple tech tried over phone for an hour but it didn't solve this issue. See others are in the same boat. Any help with this, please??

Same issue here with a MacBook pro recently upgraded to Mountain Lion. I hadn't tried iTunes Match prior to the upgrade so can't say whether or not it worked previously.
Getting quite frustrated!

I have a Macbook Pro 1,2 (2008) running OS 10.6.8 and trying to install Boot Camp but don't have original disk for drivers. What to do?

I have a MacBook Pro 1,2 (2008) running OS 10.6.8 and trying to install boot camp with windows xp and don't have my original disk for drivers. What do I need to do?

Call Applecare and ask them to send you a replacement set. The will charge you a nominal fee for shipping and handling.
Allan

Macbook Pro (2GHz Core Duo) won't boot while ANY internal DVD attached

15" Macbook Pro 2GHz Core Duo (2006-7)
Hi all -
I'm having trouble with this macbook pro... it runs perfectly fine, as long as I do NOT attach any DVD-drive/Superdrive to the logic board (internal drives). However, if I attach the correct drive (confirmed working part) to the logic board... when I go to power it on, it attempts to start but almost instantly dies/turns off. You can hear the HDD start to spin up, but nothing else. If I hold the power button (like using the reset technique), it repeats that rapidly with a strange sound like the power is disrupted. Winding up sound... quickly, and repeatedly. Never powers on though and no screen response.
I'm assuming something is wrong with the connection site on the logic board, so I'm wondering what else I can do to have an internal optical drive. I notice a plug-in port (smaller) to the left. Is that a usable port with the right flex cable?? Or somewhere else on the board perhaps besides the connection site for the HDD? Thanks in advance.
J

I actually don't know. It might be worth a close examination of the logic board socket with a good light and magnification. A poster on the PowerMac G4 forum found a tiny resistor in the RAM slot that was causing problems, and later found a missing resistor on one of the RAM sticks. Everything is a lot tinier on a MBP socket, but if you can spot any kind of foreign object that might be causing a short, you could attempt to blow it out with compressed air.
I believe there is a kit that allows you to replace the optical drive with a second hard drive. Don't know if the second socket is for that or something else. Just a speculation--I really don't know but it has to be there for a reason.
Good luck!

My computer is a MacBook Pro Intel core duo, and I need to know if I can run the new Lion OS?

My computer is a MacBook Pro Intel core duo, and I need to know if I can run the new Lion OS? The Apple web says must have Intel Core 2 Duo. Please advise. Not knowledgeable enough to know if not having the 2 between Core and Duo is a stopper. Appreciate any guidance.

The difference between a Core Duo and a Core 2 Duo is a show stopper when it comes to running Lion. The Core Duo is still only a 32 bit chip, but the Core 2 Duo is a 64 bit chip. You need the 64 bit chip to run Lion.

New mac book pro - to run boot camp or not?

hi,
im a brand new mac user and have had a brief browse of some problems that others have encountered with boot camp and possible crashes during partitioning...
i'm not sure if anyone can help but i was wondering if it would be safest to run boot camp and partition my hard drive before i even use my new mbp? or to not run it at all - i will only be using windows to play the odd computer game, for everything else i will use my mbp as it was originally intended.
what is the level of risk involved with boot camp? ...should i just run it before any data is saved onto the drive and hope for the best...?
or fork out the cash for the mac versions of the each game (3 max)?
i just don't want to screw it up, as my brother has had similar problems with his... and i've been saving for months!
thanks for reading this far and thankyou for your help in advance!

Boot Camp works beautifully if you follow directions. BC is merely an installer (and a good one). Windows works perfectly well on a Mac (better than some PCs). Windows is Windows - it has it's needs. If you are familiar with Windows no problem. Or - if you are willing to learn - no problem. There IS wisdom in installing BC right away. I found that if I install BC right after OS X, it is a good idea. As soon as I loaded the OSX updates there was potential trouble in that the updates were placed right in the spot where I needed my partition to go - requiring the Apple equivalent of a defrag. This happens rarely, but it does happen. Install OS X > Open BootCamp & Install > Partition for Windows > Update OS X - you'll be fine.

MacBook Pro (Mid 2010) will only boot in safe mode.

I've been unable to boot my MacBook Pro normally. It will boot in safe mode, and, until today, I was able to get a normal startup after resetting both PRAM and SMC. Running "Repair Disk" on the startup disk did not reveal any problems. I have also done a recovery boot to reinstall OS (10.9.1), which did not help either, though I did not wipe the hard disc first (I did back it up).
Had to take it to Apple back in January when the screen started acting funny, i.e. getting static-y and going blank for seconds at a time but then coming back. Their tests showed that there were no hardware problems, and the screen issue was eventually resolved by doing a PRAM reset. About 14 months ago, I had the logic board replaced.
Also, I'm not sure if this is related, but when I have been able to boot normally, if I quit Google Chrome, the machine will freeze completely.
Ran EtreCheck; here's the info from that:
Hardware Information:
          MacBook Pro (15-inch, Mid 2010)
          MacBook Pro - model: MacBookPro6,2
          1 2.66 GHz Intel Core i7 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics - VRAM: 288 MB
          NVIDIA GeForce GT 330M - VRAM: 512 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 0:50:36
Disk Information:
          ST9500420ASG disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 499.25 GB (146.37 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-898
USB Information:
          Apple Inc. Built-in iSight
          Apple Computer, Inc. IR Receiver
          Apple Internal Memory Card Reader
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Configuration files:
          /etc/hosts - Count: 15
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.adobe.SwitchBoard.plist 3rd-Party support link
          [System] com.google.keystone.daemon.plist 3rd-Party support link
          [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
          [invalid] com.oracle.java.Helper-Tool.plist
Launch Agents:
          [System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
          [System] com.adobe.CS5ServiceManager.plist 3rd-Party support link
          [System] com.divx.dms.agent.plist 3rd-Party support link
          [System] com.divx.update.agent.plist 3rd-Party support link
          [System] com.google.keystone.agent.plist 3rd-Party support link
          [invalid] com.oracle.java.Java-Updater.plist
          [System] com.wacom.wacomtablet.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
          [not loaded] com.mlbam.nexdef.core.NexdefLoader.plist 3rd-Party support link
          [not loaded] com.mlbam.nexdef.plist 3rd-Party support link
          [not loaded] com.spotify.webhelper.plist 3rd-Party support link
User Login Items:
          XPSLauncher
Internet Plug-ins:
          AdobePDFViewerNPAPI: Version: 10.1.9 3rd-Party support link
          Flash Player: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
          McGraw Hill ChemDraw: Version: 12.0.3 3rd-Party support link
          DivX Web Player: Version: 3.0 - SDK 10.5 3rd-Party support link
          AdobePDFViewer: Version: 10.1.9 3rd-Party support link
          WacomNetscape: Version: 2.1.0-1 - SDK 10.8 3rd-Party support link
          googletalkbrowserplugin: Version: 5.1.4.17398 3rd-Party support link
          iPhotoPhotocast: Version: 7.0
          DirectorShockwave: Version: 11.6.5r635 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          FlashPlayer-10.6: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
          npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 3rd-Party support link
          Silverlight: Version: 5.1.20125.0 - SDK 10.6 3rd-Party support link
          OVSHelper: Version: 1.1 3rd-Party support link
          Google Earth Web Plug-in: Version: 6.1 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          Flip4Mac WMV Plugin: Version: 2.4.4.2 3rd-Party support link
          o1dbrowserplugin: Version: 5.1.4.17398 3rd-Party support link
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
          WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 3rd-Party support link
          JavaAppletPlugin: Version: 14.8.0 - SDK 10.9 Outdated! Update
          AmazonMP3DownloaderPlugin101736: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 3rd-Party support link
Safari Extensions:
          ClickToFlash: Version: 2.7.5
          ClickToPlugin: Version: 2.7.5
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
          WebEx64: Version: 1.0 - SDK 10.6 3rd-Party support link
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
          Flip4Mac WMV 3rd-Party support link
          Growl 3rd-Party support link
          Perian 3rd-Party support link
          WacomTablet 3rd-Party support link
Old Applications:
          None
Time Machine:
          Skip System Files: NO
          Mobile backups: OFF
          Auto backup: NO - Auto backup turned off
          Volumes being backed up:
                    Macintosh HD: Disk size: 464.96 GB Disk used: 328.64 GB
          Destinations:
                    G-DRIVE [Local] (Last used)
                    Total size: 465.64 GB
                    Total number of backups: 1
                    Oldest backup: 2013-07-27 20:13:09 +0000
                    Last backup: 2013-07-27 20:13:09 +0000
                    Size of backup disk: Too small
                              Backup size 465.64 GB < (Disk used 328.64 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               1%          hidd
               1%          EtreCheck
               1%          WindowServer
               0%          mds
               0%          Google Chrome
Top Processes by Memory:
          180 MB          Google Chrome
          168 MB          com.apple.IconServicesAgent
          111 MB          Finder
          77 MB          Google Chrome Helper
          74 MB          Dock
Virtual Memory Information:
          850 MB          Free RAM
          1.80 GB          Active RAM
          839 MB          Inactive RAM
          432 MB          Wired RAM
          584 MB          Page-ins
          0 B          Page-outs
Any ideas are much appreciated!

First try doing a Software Update.
Then restart and see if that works.
If not then I would update Java.
Restart and see if that works.
If not then delete the following plist items.
[invalid] com.oracle.java.Helper-Tool.plist
[invalid] com.oracle.java.Java-Updater.plist
Should find these in:
/Macintosh HD/Library/LaunchAgents
/Macintosh HD/Library/LaunchDaemons
Now restart & see if that works.
If that doesn't work try deleting everything in:
/Macintosh HD/Library/StartupItems
Hope this helps.

Intel iMac running boot camp success

I am looking at replacing my HS PC Lab and I am debating if I want to replace the labe with 17" iMac Intel machines and running boot camp on the iMac to get to my windows applications. Is there anybody out there that has purchased the Intel iMacs and run boot camp for windows applcations for the entire school day? If so, what is your success rate? Are you running Windows 2000, Windows XP Pro, or Windows Vista? I have heard of schools doing this for 1 hour a day and are happy with it.

Hi there.... my 5 cent is:
I use OSX for as much as possible.
I use bootcamp with Windows XP for gaming, and get "native" PC speed. With the present version of Bootcamp I have had no issues at all. The iMac just works as a PC (but looks so MUCH better)..
I use Parallels desktop with Windows XP for all other "non gaming" windows applications with only a small impact on speed. All other for me however means only a piece of GPS software for my PocketPC - not available in OSX version....
If you want style and versatility - go for the Mac
iMac 20" Core Duo, 2 GB Ram, 256 Mb Video Mac OS X (10.4.8)

How can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3

Does anyone know how can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3. Thanks.

Sean and Andy -
I have to agree with Andy here. I am having the same problem on a mid 2010 MBP (6,2). I have already read the AHT info provided by Sean's link, and they are less than helpful. I'm sure they will be helpful to those who find that they work, but they are confusing if this is not the case. For example, my MBP(6,2) came with ONE (not two) installation disks, so the instructions don't work for me. Another issue is the instructions confound the descriptions related to the MBP, the original (delivered) software (OS X version), and the current installed OS X upgrade software.
So here's what does NOT work for me...
     (A) I cannot install 'Disk 2', since I never received this with my original (new) purchase in mid 2010.
     (B) I have checked my firmware versions and they are all up to date, as per Apple's information.
     (C) As suggested in another thread, I looked for /Library/Core Services/.diagnostics and it was NOT present. I followed his instructions, downloaded the correct (I believe) dmg, and installed it. It is in the correct place, and I can see all the invisible files using Pathfinder.
     (D) When I re-start holding down the D key (immediately), it just goes through the normal boot routine; no evidence of AHT.
     (E.1) When I re-start holding down OPT-D, I get a spinning globe, and then it prompts me for a network (wi-fi) connection.
     (E.2) For some unknown reason, the prompt identifies between 2 and 5 of my --neighbors'-- routers, but does not show mine. (??!!)
     (E.3) The routers are listed alphabetically; however, my router SHOULD be at the top of the list by this criterion, but it is nowhere to be seen.
     (E.4) The 'internet recovery' process then allows me to enter a network name AND password. I do this, for my current wi-fi router, and the process rejects it as an incorrect login ID. It is NOT an incorrect login ID!
So, now asking Sean and Andy (or anyone else) for further suggestions... ??? As Andy suggested, many people ask questions here because they have -already- worked through the 'official' recommendations, and have found them to be inadequate.
Any advice would be appreciated! TIA.
Ed

Macbook Pro hangs when trying to boot from disc

I'm attempting to reinstall OS 10.6, and normally it works just fine. However, I got this computer, it reads the Leopard disc just fine, I restart, hold down C and it just hangs out on the apple logo for hours on end and won't boot to disc.
Any ideas?

alainmeyer1 wrote:
Spinning gear? Never in my mac years have I seen a spinning gear when booting from the disc.
You should see what is variously described as a spinner, a spinning gear, or spinning clock appear below the Apple logo during startup any time you start up your Mac, whether from a DVD or HD. The spinner looks like a radial set of lines rotating in a clockwise direction, & indicates the kernel is loading, as described in Intel-based Mac: Startup sequence and error codes, symbols.
Booting from the original snow leopard cd; I don't believe I possess the original restore disc anymore.
In your first post & in your current profile info you indicate this is an MacBook Pro 17" Core i7 model; in your second post here the "Core i7" part is missing. This makes it hard to guess which 17" MBP model you are talking about. Note that each model has a minimum OS build version requirement & cannot start up from a lower version than that. Use the chart in Mac OS X versions (builds) included with Intel-based Macs to identify which version this is for your MBP & make sure your Snow Leopard DVD runs that version or later.
For instance, if this is a Core i7 MBP, it must be a Mid 2010 model & requires at least version 10.6.3, build 10D2063a, 10D2094, or 10D2101a. An original Snow Leopard DVD has version 10.6 & will not work with it.

MacBook Pro 15' Core i7 Running Boot Camp Turns on in OSX fine, but in windows, whenever plug it in, the display goes black.

Similar Messages

Maybe you are looking for