MacBook Pro 15" Hard Drive Problem.

Hello ... I have a MacBook Pro 15" which recently died on me. When I turn it on, on the "gray" screen there is a blinking folder in the middle. Snow Leopard never boots up. I thought that my hard drive died, bought a new one for it. Replaced it and when I boot it from leopard to install it on the new drive, when I was asked to select the volume in which I want it the new OS, there was no drive that I could select. Therefore, I am stuck in that step. I used an external enclosure to see if the drive was faulty, but it came up on my iMac. I also placed the old hard drive on an enclosure, and it came up fine on the iMac. So, looks like it is not a hard drive problem, any ideas on what I can try or might be ... ? Thanks!!

Did you use the disk utility on the Snow Leopard installation disk to partition the new disk. If you don't do this the installer does not see the disk.

Similar Messages

  • I had problems with my MacBook pro's hard drive.

    I had problems with my MacBook pro's hard drive. And I have this question how can I end up getting a replacement for it like get a new one.

    The recycle program makes it easier for you to trade in your old Mac and buy a new one. Apple has a partner that will take the old one and give you a gift card for the value -- if your old Mac is in pretty good condition and doen't have problems (passes the diagnostics).

  • My MacBook Pro's hard drive is about full, can I move a lot of the data to my 3 TB Time Capsule?

    I have a late 2011 MacBook Pro 17 Inch with 750 GB of space on its hard drive.  About a month and half ago I bought a 3 TB Time Capsule and I know that Time Capsule, together with Time Machine, basically takes periodic snapshots of your hard drive and will rearrange/clean/delete files on your hard drive.  What I want to know is that since I'm about to run out of space on the internal hard drive can I move a good chunk of the data into the Time Capsule and free up that data on internal hard drive.  Videos take up about 75% of my MacBook Pro's hard drive so video's are my biggest problem.  If I can't do this with the Time Capsule I guess that's a con of the Time Capsule/Time Machine.
    Thank you to anyone that answers!

    You should be able to do that by partitioning but then how would that data be backed up?  If the Time Capsule drive fails, then all of that data is lost.  I would suggest you consider an additional external HDD for redundancy unless the video files are of no importance.
    Ciao.

  • I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!

    I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!

    This is true of course, but doesn't cover the situation where some files are in the iTunes Media folder and others are on an external drive. In my case I keep my music in the Media folder and all my films on an external drive (there are too many to have on the internal drive). In iTunes 11, and before, it was easy to add those external files by holding down the alt/opt key while dragging to the sidebar. In iTunes 12 this is no longer possible. There are several workarounds: use TuneSpan to move the file after it's been added; delete the file from the Media folder and empty the trash then use iTunes Get Info which will report the file is missing and allow you to locate it; constantly switch the Add to iTunes toggle on and off as required. All of these require a lot more work than just holding down the alt/opt key while adding.
    It constantly gets harder.

  • On my macbook pro the hard drive icon is not on my desktop and I don't know how to find the hard drive or get the icon back on my desktop

    on my macbook pro the hard drive icon is not on my desktop and I don't know how to find the hard drive or get the icon back on my desktop

    Click on the Desktop. From the Finder menu select Preferences. Check the boxes for what you want on your Desktop. If they are already checked, then try unchecking and rechecking.

  • HT201250 I recently replaced my 2009 Macbook Pro's hard drive.  I had the Apple store upgrade the OS to Mountain Lion while it was being repaired.  I want to restore all of my old files and data, if I restore from Time Machine, will it revert to the old O

    I recently had to replace my 2009 Macbook Pro's hard drive.  I had the apple store upgrade the OS to Mountain Lion while it was in being repaired.  I want to restore all of my old data and files.  If I perform a restore from Time Machine, with a date prior to having the hard drive replaced, will it revert back to the old OS?

    No, it won't revert to the prior OS X but you you may have third party apps installed that were compatible with Lion that may not be compatible with Mountain Lion.
    App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS
    After you restore from TM, check HD > Incompatible Software

  • Hey, can i clone my Macbook Pro internal hard drive and then paste it all onto a formated external hard drive, then make the Mac use the external as the primary hard drive?

    hey, can i clone my Macbook Pro internal hard drive and then paste it all onto a formated external hard drive, then make the Mac use the external as the primary hard drive? please help for i only have around 618mb left out of 189GB!!!!!!!!!!!!!!!!

    If what doesn't work?
    If cloning your internal drive to the external drive is not successful, I expect CCC will tell you so. Assuming that doesn't happen, you will have a bootable replica of the internal drive on the external drive once CCC has finished.
    You can then do any of several things:
    1. Replace your internal drive with a much larger one (320GB or 500GB, or even larger), and clone the external drive's contents onto the new drive so you'll have all your data in one place. Note that if you do this, you'll also need to buy an external drive that's large enough to back the new internal drive up on.
    2. Boot from the external drive as a temporary measure while you clear at least 30-40GB of data off the internal drive, allowing you to keep using it and saving small amounts of data to it. The external drive will then contain the only copies of the files you've deleted from the internal drive, so you'll need a seond external drive large enough to back both the other drives up on.
    If you can't comfortably clear a minimum of 30GB off the internal drive, you really need a larger internal drive right now, and you shouldn't bother fooling around with the inadequate one you have — you'll just quickly overfill it again.
    3. Replace the optical drive in your MBP with a large conventional hard drive, giving you two hard drives inside the machine. You will then need one or more external drives large enough to back up both of the internal drives.
    If you sense a theme here — back up, back up, back up — you are correct. It's flat-out foolhardy to own or use a computer without maintaining complete, up-to-date backups of everything at all times.

  • Macbook Pro 2010 Hard Drive Constant Verification Problem

    Hi guys and girls. I'm at my wits end with my beloved Macbook Pro 2010. Recently in the last 6 months it has randomly on 3 occasions just powered down all of a sudden during operating. When it restarts it comes up with the apple logo and that loading bar underneath but fails to fully load and once again powers off.
    I then go into CMD+R and will find that the Hitachi HDD will state 'SMART STATUS' as 'Verified' and it will verify permissions.When I go to verify the disk it comes up with an error. if i try and do a back up I get the common 'error 20'; message even if I try it to an external hard drive or different usbs.
    In the end I have to reinstall the OSX and install the OSX on a 1TB Toshiba USB, then the mac restarts and works but keeps booting off my Toshiba USB. I end up having to use superclone and transfer it to the Hitachi drive. The Hitachi drive will format and work once the OSX is running.
    Randomly this cycle will repeat itself every few months - ie computer turns off all of a sudden..FAIL loading..and same problem with disk utility.
    I wanted to ask is this as my hard drive needs replacing that this is happening or do I have a more serious problem?
    I

    lemoncool wrote:
    If I replace the internal hard drive and the same thing happens again, this would mean it is a cable issue?
    https://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Mid+2010+Hard+Drive-IR+ Sensor+Cable+Replacement/3031
    Unplugging and reconnecting the cable may resolve it - bad connection
    Yes, that is a possibility.  Reconnecting may solve the issue but that is not a 100% solution.
    How would I go about unplugging and reconnecting it when am installing the new internal hard drive?
    I am guessing that you have a 13" 2010 MBP.  If not, the same web site has instructions for 2010 15" and 17" MBPs as well.  Examine these instructions:
    https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Unibody+Mid+2010+Hard+Drive+Cab le+Replacement/4304
    https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Unibody+Mid+2010+Hard+Drive+Rep lacement/4305
    Also in terms of the phillips and torx to install the internal hard drive- would this one be suitable that shop sells?- http://www.maplin.co.uk/p/23-in-1-multi-function-precision-screwdriver-n42jx
    NO!  That tool does not have the correct sizes for either driver.  #00 Phillips, #6 Torx are the ones you need.
    Ciao.

  • Problem with mid-2009 MacBook Pro 13" hard drives

    In May of this year I upgraded my stock hard drive to a 500GB Hitachi from the stock 160. About 5 days ago the computer froze and hung gor several minutes. Mouse still moved but no response from the OS. Forced a restart after several minutes. The computer rebooted, but showed no hard drive. Install DVD (Snow Leopard) doesn't detect hard drive, neither does disk utility. I put the old hard drive back in, everything is fine. The OS finds updates available, updates to 10.6.4. Tonight, the same precise thing happens on the old drive. No disk showing in the installer or disk utility.
    Any suggestions?

    Run the Apple Hardware Test you'll find on one of the DVDs that came with your computer. Swap the drives again and repeat the test, so you'll have results from each drive. Note the exact text of the error message each time, then make a Genius Bar appointment at your nearest Apple Store, or take the machine to an authorized service provider for diagnosis, being sure to take along copies of the error messages.

  • My mid-2009 MacBook Pro's hard drive is near death. I want to install a new SSD and work from scratch. Please help.

    Recently, my mid-2009 MacBook Pro has been crashing when I close the screen ("it's having a problem recognizing when the screen is closed/open and deciding what to do, error overload etc.").  It wasn't an SMC issue so I took it to an Apple Store, ran some tests, and decided my hard-drive is failing.
    Not wanting to spend an insane amount of money on some "official apple hard-drive," I want to install a new 256GB SSD instead.  Hoping to squeeze as much life out of this computer as possible (in January I upgraded from 4 GB RAM to 8 GB), I would like to try and start from scratch, i.e. back-up important folders, music, photos etc. and only take that to the new hard-drive.  If someone could explain all the steps I need to take to safely complete this task (or point me in the direction of a guide) I'd appreciate it.
    Potentially Important info:
         Model:                mid-2009 13'' MacBook Pro
         Processor:          2.53 GHz Intel Core 2 Duo
         Memory:             4 GB 1067 MHz DDR3
         Software:            OS X 10.8.4
    Some additional questions I have...
         Should I be concerned with making a fully bootable back-up (not sure what that is called) as well?  If so, what program should I use to create it?
         How much more life should I try and push out of this computer?  I'm an engineering student and really only use it for web-surfing, music, and
              word-processing.  The batter was replaced in March, the RAM was upgraded to 8 GB in January.  When the battery was swapped, the trackpad went           nuts so that's new too.  Only other issues are a slightly loose audio jack and the left side of the screen being slightly wobbly (hinge is worn I'm told).

    cwgonzalez1192
         Should I be concerned with making a fully bootable back-up (not sure what that is called) as well?  If so, what program should I use to create it?
         How much more life should I try and push out of this computer?  I'm an engineering student and really only use it for web-surfing, music, and
              word-processing.
    Well there is no "official Apple HD / SSD" in any regard, no worries there.
    If as you say youre only using same for surfing and word processing, why the need for a SSD? You would not notice any speed diff. in use on either of those,....in boot times yes, but in word or surfing, not.
    You can push it likely a few more years, for mere surfing and word processing,...many many years.   Up TO the point that any major fixes become unrealistic relative to getting a new(ER) machine.
    Concerned with a boot clone?  yes and no.  Its an ideal immediate recovery, since you cannot boot from Time Machine, ....in case of HD crash, recovery takes seconds from boot, or 20 mins or so from removing old and installing a clone. All the prosumers and pros have at least one updated clone of their prime machines.
    You can do a "fresh install" if you choose, however if your current drive is FINE, why not merely clone it and save yourself some headache?...., but that is your prerogative of course.    Ideally 2 drives, one to backup your data (you need that regardless of installing a new drive for sake of a backup/archive,...ideally 2 actually, not merely one).
    You could clone internal to NEW SSD/HD , ...then offload unnecessary files to an external to free up space and clutter and run off the clone, and this would only take a couple hours......the clone itself takes approx. 40+ mins.
    CLONE Apps :
    Superduper does not clone the recovery partition, but that is NOT necessary if you keep the original HD as a “backup clone”. Most don’t bother with the recovery partition in a clone, however that is your prerogative.
    http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
    (Free superduper APP above)
    CCC App
    http://www.bombich.com/

  • Urgent - I think I just lost everything on my MacBook Pro. Hard drive won't mount and booting up shows "no" symbol

    My MacBook Pro (13" mid 2010, Yosemite) doesn't feel like booting up. It gives me the no symbol after the progress bar is about 1/4 of the way through.
    Additionally, it won't mount in the Recovery HD. It shows up as disk0s6 and clicking Mount does nothing. Can't seem to mount it in the Terminal either.
    The disk partition is encrypted, so unfortunately I can't pull the hard drive out of my MBP and pull the stuff off it with my PC.
    I tried First Aid - "no problems found" (such LIES!)
    I tried PRAM - didn't work
    I tried Verbose Mode - went fine for the first minute, then hung for a while before returning to the "No" screen and in the bottom right corner "Still waiting for root drive".
    I tried SMC - didn't work
    Most recently I did install rEFInd - which is a boot manager. I was afraid it screwed up the EFI partition -seemingly not, as it will boot to Recovery and external drives.
    The data still seems to be there, but the OS is having trouble accessing it.
    Do you know what would be causing this? I really need that data back :/

    It appears I can unlock the partition, using diskutil via the Terminal (diskutil coreStorage unlockVolume <UUID> -passphrase <passphrase>).
    However the volume doesn't have a UUID. It lists the partition type as "FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF" (which is a UUID) but using that doesn't work.
    Additionally when I use diskutil coreStorage list, it comes up with nothing. I'm at a loss here, the partition doesn't even know it's own UUID or that it's encrypted. It seems quite damaged to me but I don't have the slightest idea why, as I CAN boot to it and enter the password but it will stop at the "no" symbol part of the way along.

  • MacBook Pro -- external hard drive corruption -- AND hanging computer?

    Since purchasing a 17" MacBook Pro, I've had serious problems with directory corruption on three of my external firewire hard drives (80 and 100 G FireLite Pocket drives and a 400 G Lacie drive). About 2 weeks ago, the 80 G drive (with most of my critical files) disappeared from the desktop. Disk Utilities returned with a message that it was repairable. Tech Tools supposedly fixed it, but the drive icon shortly disappeared from the desktop. This time, Disk Utilities "repaired" it, but it was the kiss of death. After this, plugging in the drive caused the computer to hang indefinitely. I could no longer run any repair or data rescue software. Once this problem occurs, I can switch firewire cables and computers, and the computers still crash/hang. A techy at work managed to rescue the files and replace them on the disk (this required other hardware, a PC, and some software he downloaded(?)). Two weeks later, the problem happened again. However, this time, it was the 80 G and my 400 G backup drive. Now, all of my originals and backups (for the past 2 years, since I did my last CD/DVD backups) are (hopefully) temporarily unavailable. My 100 G drive started to do the same thing. However, I purchased and downloaded a copy of Disk Warrior, which seems to have rescued this disk.
    I've had these drive for between 3 and 5 years, with little or absolutely no trouble. Then, after getting the MacBook Pro, I'm encountering really serious problems.
    Is the MacBook Pro at fault? (I've returned to my PowerBook G4 until this issue is resolve).
    What causes such severe disk directory damage that causes my computer to hang?
    How can I recover my files (critically important to my work, some of which is on a tight deadline) without having to run to the vastly overworked/underpaid techy in my place of employment)?
    My conversation with an Apple Tech was much less than satisfying. In fact, he seemed to portray a state of denial about the MacBook Pro having any problems, even though the web is full of complaints. What's up Apple? Are you beginning to backslide yet again?

    Welcome To Discussions JeffBloom!
    I'm sorry to hear that you are having problems with your MBP, but you have posted your inquiry, in the Discussions Forum, that is intended for discourse about the use of Apple Discussions.
    You will get more focused attention to your issue, if you select a more appropriate location from this page Discussions Forum Home.
    For example,
    From the Forum Home Page, select the Category MacBook Pro.
    Then choose an appropriate MBP Forum, such as Using your MacBook Pro.
    On Forum pages, there is an option to Post New Topic.
    Good Luck!
    ali b

  • MacBook Pro/External Hard Drive/Windows PC

    I have a MacBook Pro and a Windows desktop...and an external hard drive.  I want to load some music on the external hard drive using the MacBook and then copy from the external hard drive to the Windows desktop.  Is this possible?

    ExFAT - A newer file format, supported in Mac OS X 10.6.5 or later.
    Advantages: exFAT has many of the same advantages as FAT32 in that it's a disk format that offers interoperability between Macs and PCs. It has one big advantage over FAT32: exFAT supports file sizes larger than 4 GB, so if you have a need to move huge files between Macs and PCs, this is likely the format you'll want for your flash drive.
    exFAT is supported by the following operating systems:
    Mac OS X Snow Leopard (10.6.5 or greater)
    OS X Lion
    Windows XP SP2 or later (with an additional update for exFAT support)
    Windows Vista SP1 or later
    Windows 7
    Disadvantages: As a relatively newer file system format, exFAT isn't supported in older versions of Mac OS X (anything prior to 10.6.5) or anything older than Windows XP SP2. If you won't be dealing with older Macs or PCs, this may not be a problem. Of greater issue is that most consumer electronics (cameras, camcorders, video game systems) don't support exFAT, either. If you need to transfer files between your Mac and one of these non-PC devices, you're almost certainly going to have to format your flash drive in FAT32 instead.

  • Macbook Pro - 2 Hard Drives - Dual Boot OS OSX + Windows

    Hello guys, I've been facing an issue here
    I bought an SSD 2 years ago and changed the original MBP HD. I did a fresh install of OSX while still having my optical drive. Everything is fine with the OSX installation.
    Recently I bought an enclosure and installed the original MBP HD drive into the optical drive slot. Now i have two HD's on my MBP (Early 2011 - Unibody Model)
    The configuration for the Hard Drives is as follows:
    SSD Drive - disk 0 - OS X Running fine
    HD Drive - disk 1 - clean formatted to accommodate Windows 7 installation
    I started the BootCamp Utility formated the second hard drive to install windows from bootable USB. Everything works fine until the point where the Windows installation actually expands the files. I always get the same error, that windows cannot be installed on that drive and any changes will be reverted back to original settings.
    Several hours after researching the whole thing this is what I've got:
    The error that I am getting is for the configuration of the drives, a fix to this problem is to take out my SSD, install the old HD in its original position, install windows normally, put my SSD back in its position and put the old HD in the optical drive and thus I will have the Dual Boot of two OS in two different HD's. That's really really awful as I have to take appart again the whole thing and swap between the drives till the process is finished. This is because The EFI boot + Windows to be installed require the disk that windows to be installed to be on main slot - disk 0.
    My question here is, is there any fix to the BootCamp assistant to let me install windows on the hard drive that it is located on the disk 1 position?
    Moreover is there any way to install windows through the environment of OSX with the use of a VM, but, the windows to be a bootable OS rather than a VM bootable image? (on disk 1 - optical drive SATA port). - What I mean by that is, while running OS X normally on disk 0 run a VM software that will mimic the environment of a bootloader so that I can install windows on disk 1, but after I shut down my computer, windows should be accessible on disk 1 as a normal installed OS.
    Sorry for the long post and thank you very much for your time, any suggestions would be really helpful.

    You can install Parallels or Fusion, either will work. When you setup either Parallels or fusion you can tell it to use your already installed Boot Camp installation of Windows as its target guest operating system.
    You would then just boot into OSx, start your VM (Parallels or Fusion), then you'll have access to both OSx and Windows without having to reboot.
    I have this setup and two monitors. I have my Windows running on my external monitor and OSx running on my Macbook Pro monitor at the same time.
    Beware that you will need to re-register Windows to get a second key. This is free and easily done either online or by calling the Microsoft registration number. The reason for needing a second key is that Windows, although only installed once in your Boot Camp partition sees the virtual hardware created by your virtual machine and thinks it has been reinstalled on a new computer.

  • Macbook Pro Reformat Hard drive issues

    Hard drive crashed a few months back in my MBP.  My optical drive doesn't work and I have Snow Leopard install disks.  I went to Best Buy, bought a 1TB Seagate SATA SSD+HDD hybrid drive to replace the 250 GB one I had.  I'm trying to get the stupid thing to format buy I'm not having any luck.  Here's what I've tried:
    1.  Was able to boot up through disk utility and tried to install OS Mavericks wirelessly but when I login to my apple account to verify, and click install I get a quick message stating there was a problem and to try again.  It never works
    2.  Bought a external optical drive and tried to install Snow Lepoard but when I turn it on that way it tries to load and then goes to a gray screen tell me that my computer needs to restart.  I restart it and it does the same thing.
    3.  Went to the Mac Store to ask some questions. . .told them I had an iMac and bought a firewire cable. I've tried to install Snow Lepoard via firewire cable but the instructions that I find just plain don't work.  I run Lion on my iMac and I can get my computer to recognize my MBP but choosing that and formatting it with the drive on my iMac isn't working either.
    I'm about to use the stupid MBP as a frisbee out my back patio.  Please help! 

    My Macbook Pro is a mid-2010 model. 

Maybe you are looking for