Macbook pro 15' power adapter not working

When I was using macbook pro 15' early 2008 this morning, the power adapter suddenly did not work. The led light on the power adapter blanked and the status bar showed that I was using the battery. I am sure about the power adapter is fine cause I try it on another macbook pro and it works well. I have tried to take off the battery and the power adapter for 30 secs and then press the power button. But it does nothing good. I have tried to press the option + command + "R" + "P" and power button to reset PRAM. But the problem is still there. Now I have run out my battery what should I do ?
Message was edited by: fivedays5
Message was edited by: fivedays5

Welcome to Apple Discussions
It sounds like the power board inside the MacBook Pro has failed, best get it to an authorised repair centre.

Similar Messages

  • My macbook pro 15' sound is not working, every time i turn on the internal speakers they just turn back off, and i have already tried putting in my headphones 5 or 6 time

    my macbook pro 15' sound is not working, every time i turn on the internal speakers they just turn back off, and i have already tried putting in my headphones 5 or 6 time

    Hi eleni_georgia,
    Welcome to Apple Support Communities.
    The article linked below provides some additional tips that will help you resolve the audio issue that you described.
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/TS1574
    Cheers!
    -Jason

  • My MacBook Pro internal speakers are not working, what happened?

    My MacBook Pro internal speakers are not working, what happened? If I plug in earbuds or external speakers, there is sound. In sound preferences, internal speakers are not a choice. Why doesn't my internal speakers work?

    Hopefully one of these steps should solve the problem.
    1. Remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    2. Reset PRAM.  http://support.apple.com/kb/PH4405
    3. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    4. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.
    Best.

  • Macbook pro (early 2008): Trackpad not working under Windows XP

    My Trackpad worked regularly under Windows (Bootcamp) and Mac OSx until some months ago my Motherboard had to be exchanged because of a fault function of the graphics card. When I started Macintosh after the Macbook pro was repaired the Trackpad worked regularly, but under windows the mouse didn't react to moving the finger or clicking. I reinstalled the drivers, but this didn't fix the problem.
    What shall i do now? Thank you for any advices.

    since my mac is year and two months old (funny, two months and you are screwed).
    Not if you had of purchased Apple Care.  You would have been covered for 3 years.
    What I would like to say to the Apple:
    This is not the place as Apple does not come to these forums. 
    These are user-to-user forums where everyday folk post "technical" questions and offer answers to each other voluntarily.  No one here works for Apple nor does Apple get involved in responding.  Not even sure if they "lurk."
    "Say" it here -
    Product Feedback

  • MacBook Pro 17" power adapter lights orange when NOT plugged into laptop.

    My MacBook Pro power adapter lights up orange even though it is not plugged into a device. When I do plug it into my laptop it remains the same and does not charge. Due to this my laptop is now dead. What does this orange light mean?
    link to photo of issue: http://fenixphire.tumblr.com/image/89318049330

    You should take both your MBP(Macbook Pro) and your power adapter to an Apple Genius bar or an AASP(Authorized Apple Service Provider) for a free evaluation. This is a strange occurance, and it seems that it may be a hardware malfunction.
    Make an appointment so you don't have to wait too long.
    http://www.apple.com/retail/geniusbar/
    If not US, check here;
    Contact Apple for support and service
    This is not a common occurance

  • MacBook Pro using power adapter but not charging.

    My MacBook Pro is plugged in w/the power adapter, the green charging light is on, but my battery percentage is only showing 15% and is not increasing.  It was actually at 60% this afternoon...went to 22% and now is @ 15%. 

    Could be bad battery or faulty charger or faulty charging circuitry. Take it to an Apple store or AASP.

  • Late 2008 Macbook Pro: Which power adapter?

    Hello all. I have a Late 2008 Macbook Pro 15", MacPro5,1. A few months back my dog ate the power adapter (unplugged, thankfully.) I thought I did the proper amount of research to order the correct adapter from a third party on Amazon, because I'm pretty darn broke and need to save every penny I can. When I got the adapter, the connector was different from the one that came with my Macbook Pro. It was 85W, all the numbers matched up, but the style was different. But, the plug worked enough to let me get the work done that I needed, so it didn't concern me too much.
    That is, until this cord just stopped working. That's what I get for getting a third party cable from China off Amazon.
    So now, I'm trying to research again to make sure I'm getting the right cable, and I want one that's made by Apple, and is exactly like the one that came in the box when I bought my Macbook Pro new. I went to MacSales.com and checked their compatibility pages, and ran into some issues. What is showing as compatible with my Mac is the 85W Magsafe MC556LL/A, but this is shown with the incorrect connector (like the one I got off Amazon.)
    When I looked at the other adapters that were available, I found the MagSafe 2 85W MD506LL/A, which has a connector that looks like the original, but it only shows as compatible with 2012+ Retina Display Macbook Pros.
    So, do I have to buy the MagSafe that is not like the original that came with my Macbook Pro, or can I get the MagSafe 2 that does match what I got out of the box?
    Reference pages from MacSales.com:
    http://eshop.macsales.com/item/Apple/MC556LLA/
    http://eshop.macsales.com/item/Apple/MD506LLA/

    Thanks! I didn't realize there was a revision, but that makes sense. I guess I don't understand they would change it, then use the original design for the later Retina Display models. Oh well, as long as it works!
    On a similar note, is OWC the best option for a cheap Apple-brand adapter? They're selling them for $47, when the cheapest I can find anywhere else is like $75. They seem pretty reputable with all the options and Apple-specific stuff they offer, I just didn't want to make the same mistake again and would like other options if they are available.
    Thanks again!

  • 10.5.8 MacBook Pro: Keyboard and Trackpad Not Working

    I have an older MacBook Pro (all metal, non-chiclet keyboard) and the trackpad and keyboard have recently become unresponsive. The power buttons work fine and when I plug in a mouse and keyboard via USB, I am able to use the computer-but that limits my mobile usage. Is there a driver update/download that I can get to fix this? Side note: I no longer have the old OS X disc that came with the computer. Thanks in advance for any help!

    Hi s,
    In some cases, the battery can interfere with a cable between it and the inside of the MBP, causing keyboard and/or trackpad issues. Shut down the MBP, disconnect the power adapter, remove the battery, take a piece of something semi-soft (like a paper napkin folded over a couple times), place it over the cable you see in the battery compartment, and tape it down. Replace the battery and see how things go. If this works, you'll eventually want to replace the keyboard/trackpad cable (about $25 if you can do the work yourself). Note that if you go to a repairshop, they usually want to replace the entire top case assembly, which is much more costly.
    If the issue persists, shut down,disconnect the power adapter, remove the battery, connect the power adapter, boot the MBP and see if the issue persists without the battery in place (but remember to save a lot, because if the power adapter gets pulled out the MBP will immediately shut down and any unsaved work will be lost).
    Also look at the battery to see if it has any signs of deformity/bulging, in which case do not use it again (it may be pushing on the keyboard/trackpad cable and causing the issue); it must be replaced.

  • Macbook pro a/c adapter not charging

    The Apple a/c adapter that charges the Macbook Pro (daughter's computer) does not charge the computer nor does the green light on the cord light up.  Was going to test someone's else Macbook Pro adapter to see if the issue is with the original adapter and not the internal battery.  Assume the adapter just needs to be replaced.  Not for sure if there was some type of electrical surge or problem that caused the adapter to go bad.

    Hi
    Had the problem of "battery not charging" on Macbook Pro 2006
    Charger connecter lit up green
    It was very new non apple battery from OWC
    Looked at the System Profile only 16 cycles on the battery
    AC charger was shown as "connected"
    Battery showed up so not a problem with poor connection or not properly inserted (I had tried taking the battery in and out several times) but the profiler said "Charging: No"
    Charger worked on another Macbook so that wasnt the problem
    I tried the SMC reset where you sleep, shutdown, take out the battery, press power supply for 5 secs, reconnect AC, reinsert battery etc - No luck
    Then I read the SMC also controls the sleep wake cycle and lid closure.
    I cant exactly remember what I did because I was so ****** off by this stage and starting to lose concentration but I think I closed the lid and let the computer go to sleep and then opened it again to rewake.
    After doing this 3 times the bloody thing now shows the battery is charging
    A bit random I know but saved me having mental breakdown
    I would love to know if this helps anyone else!

  • My macbook pro's trackpad is not working.

    I have had my macbook for 2 years. I have had no problems and no complaints till this point. However, my trackpad stopped working, now I can't do anything without a mouse. When just using a trackpad it moves without me touching it and opens random apps. I really would like to know how to fix it, or how much it will cost to fix it. (no my warrenties are gone.)

    Hi again,
    Here are some additional recommendations from an earlier post by Linc Davis:
    1. Follow the instructions in this support article.
    2. Reset the System Management Controller.
    3. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
    4. A swollen battery in a MacBook Pro or Air can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced.
    5. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built in trackpad of a MacBook to  behave erratically. If you're using such an adapter, disconnect it and test.
    6. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
    7. If none of the above applies, or if you have another reason to think your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
    Cheers,
    GB

  • Macbook pro 5,1 expresscard not working

    Is there any way to test if my expresscard 3/4 port is working?
    I just purchased a Matrox MXO2 video adapter box and plugged it in and my Macbook Pro running Slow Leopard 10.6.8 is not detecting it.
    Also in the system profiler under 'PCI cards' it says 'This computer does not contact any PCI cards'.

    Welcome to Apple Discussions!
    If anyone can fix it, I've had great service from http://www.dttservice.com
    If you want to try yourself, http://www.ifixit.com may have the hints you need.

  • Macbook Pro has power but not turning on

    My daughter has a Macbook Pro she got in college, about three years ago.  She is living in Gifu City, Japan, and it stopped working today.  We bought a new battery and power supply cord just before she left.  The power light is green, but when she pushes the power button, it makes the start noise and stops.  She has no screen light coming on, and the sound stops.  Is there a place in Gifu, Japan, for repair?  If not, is there something she can do?
    Also, she always leaves it on.  I wonder if this could cause the problem?
    --Suzyann13

    Please make a Genius Appointment and take it in for service.

  • Macbook Pro Magsafe Power Adapter

    Hi,
    I recently have bought a new Macbook Pro 13". Will using its charger (model no. A1344) to charge my white Macbook (late-2006 model) damage it? The white Macbook's charger is no longer functioning and I didn't buy a new one… Do you recommend buying a new charger for white Macbook? I just don't wanna end up with a new laptop and a damaged charger..
    Thanks...

    Power adapters for Intel-based Apple portables are available in 45W, 60W, and 85W varieties. Although you should always use the proper wattage adapter for your Apple portable, you can use an adapter of a higher wattage without issue.
    For instance If you have a MacBook (13-inch Late 2009) that normally uses a 60W adapter, you can also use an 85W adapter with that computer. You would not use a 45W adapter with that computer; it would not provide enough power for that MacBook. Using an adapter of higher wattage than the adapter that came with the computer will not cause the computer to charge more quickly or otherwise operate any differently than using the adapter that came with the computer.

  • Macbook Pro 13" power adapter

    I bought my Macbook pro 13" from someone around Christmastime last year (who bought it only a few months prior) and it works great. However, my power adapter is dying and my AppleCare and warranty are up. It's very finicky and only works about 10% of the time anymore. It's the newer model of adapters that are round and thinner than the old flat rectagular adapters. Could I buy the older model for my Macbook and it'd still work? Or do I have to buy another newer model adapter?
    Thanks!

    I recommend getting the one designed for the unit to ensure long-time reliability.
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Continuity Bluetooth Calling & SMS on Macbook Pro (via iPhone 5) Not Working

    Devices:
    Macbook Pro Mid-2010 running OSX 10.10.2
    Iphone 5 running iOS 8.1.3
    *NOTE: I understand that due to the version of the Bluetooth protocol in my machine, not all continuity features are available (Handoff, Air Drop, MBP Instant Hotspot)
    However SMS to IMessage and the ability to make and receive calls from my Mac should be OK according to Apple's system requirements one-sheeter:
    System requirements for Continuity on iPhone, iPad, iPod touch, and Mac - Apple Support
    ================================================================================ =====================
    Here's my problem.
    I finally took the plunge last night and updated my iPhone 5 from 7.1 to 8.1.3 to access the iCloud Drive and additional continuity features integrated into Yosemite.
    When I tried to pair my iPhone 5 with my MBP over Bluetooth, all seemed to go well for the first 5 seconds.
    - Both devices were in discovery mode.
    - Mac saw the phone and displayed a security code
    - iPhone displayed the same security code and asked if I would like to pair with MBP
    - Pairing took place. Each devices Bluetooth profile / device showed up in my MBP Bluetooth's Preferences  and in my iPhone's Bluetooth.
    - 5 seconds later, there's no connection between devices.
    My iPhone displays:
    "Connection Unsuccessful: Make sure [Macbook Pro] is turned on and in range." (The phone is 5 inches away)
    Then sometimes I get this message:
    "Connection Unsuccessful: [Macbook Pro] is not supported.
    No rhyme or reason between the two either.
    Here's the baffling part: When I activate my Phone's HotSpot function, the Bluetooth works and connects with my MBP allowing it to use my cell phone network's data for internet connectivity.
    I don't understand what is going on or how to correct this? Can anyone succinctly explain how to correct this problems in layman terms?
    If the devices can communicate long enough to exchange security codes and verify their identities, then use Hotspot,  there is clearly a data exchange happening. Where is the break down taking place when it comes time to stay connected to so I can continue to use the limited continuity features.
    I've seen this question posted before by people having problems with different model years of MBP including the most recents models, so I know it's not mutually exclusive to my model year, but cannot seem to find clarity on an answer.

    Handoff Continuity Troubleshooting
    iPhone, iPad, iPod touch, and Mac using Continuity - Connect

Maybe you are looking for

  • Replacement ForAP_INVOICES_ALL, AP_PAYMENT_SCHEDULES_ALL

    I am trying to migrate a report from 11i to r12. Want to know the actual replacement for the following tables. AP_CHECK_STOCKS AP_INVOICES_ALL AP_INVOICE_PAYMENTS AP_INVOICE_SELECTION_CRITERIA For AP_CHECKS => IBY_PAYMENTS_ALL is given as replacement

  • Download directly to itunes library

    Is it possible to download directly from an outside source onto my pc and directly to library or do I have to first put in a folder and then drag to the library?

  • How to reset macbook to factory system ?

    My Macbook is keep popping out those advertisement and those virus website  . Watching online drama is also very lag , how can i fix these problem ? Mac Pro Os x 10.9.5

  • Listing logical database for a given application component

    hi which function module will return the logical database for a given application component from the SAP hierarchy. Example: Input- application component- LO output- MSM, etc., Thank you. your time and answers will be compensated with points.

  • ERR: SIMPLE REPORT

    hai friends     i got an error  on the following report. please mention how to rectify the error thanks & regards vallamuthu REPORT  ZREP_PURCHASE_ORDER                     . TABLES: EKKO, EKPO. DATA: BEGIN OF IT_PURORDER,                 EBELN LIKE