Macbook pro 15 shows random colored blocks when I open FaceTime
I'm having display anomoly issues when certain applications are open.
- faceTime
- photoshop CC
Hey bobbydombrowski,
Thanks for the question. I understand you are having issues with the video behavior on your internal display. The following article may help to resolve the issue:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M.
Similar Messages
-
My brother-in-law recently passed away. My sister gave his MacBook Pro to my niece. When she opens and starts the laptop, it shows my brother-in-laws name. Is there a way to change his name to her name without formatting the device and starting over?
BigTex415,
my condolences for your family’s loss. If all she seeks to do is to change the display name, and she’s willing to leave the account name unchanged, then she could do the following: log in as the administrative user and open the Users & Groups pane of System Preferences. If the padlock in the lower-left corner is locked, unlock it. Select the account that shows your brother-in-law’s name on the left-hand side of the window, and then on the right-hand side, change the text in the “Full name” textbox to her preferred display name. If desired, click on the padlock in the lower-left corner to relock it. -
Good evening ! recently, i noticed that my macbook pro make a weird sound when i open the screen, it's like there is something keeping the screen from moving correctly.the little noise comes exactly from the left side of the axis.please advice me what to do
(i live in morocco and i need to know where i should take ma macbook to get it fixed and if the warranty take this problem in charge)
thank you in advance
macbook pro mid2012 i7 (here is my e-mail adress : [email protected])You should take it to an Apple store or an AASP (Authorized Apple Service Provider) Carefully inspect the hinge joint and make sure there is no debris that you can see, you can try carefully sliding some sticky tape thru the joint to clear any loose stuff out. But this sounds like there might be more going on here, and the hinge is something that you do not want to fool with.
-
Hi ive had my macbook pro for a week or so and when i open after its been in sleep mode for quite a while it will usually make that ejecting noise. It doesnt make the ejecting noise evreytime i open it just sometimes. Is this normal HELP
Yes, it's normal.
Apple released a firmware update a couple of years ago that was supposed to stop the drive from making that noise in certain models that were available then, but even the update didn't work all the time. The noise is completely harmless and not indicative of any problem. Just ignore it. -
Sometimes when I open my MacBook Pro, it restores its RAM, as if it has run out of battery, even though it has not run out of battery and it has been charging. Why does this happen, and should it be happening?
It's similar to hybernation mode in Windows.
If you put your laptop to sleep, after X amount of hours it will move to the "deeper" sleep level (save memory to disk and shut down...), to save up battery.
Otherwise if you left your laptop asleep in the evening, you could wake up to a dead battery. Not a great surprise when you in hurry to leave the house with your laptop...
You can find our more here -
I just got this MacBook Pro yesterday for graduation, and I made a password for whenever I open the computer, and I can't remember the password for the life of me. Is there any way I can get on another way so I can change it to something I can remember? Please and thank you :)
See #6 reset users permissions/password
..Step by Step to fix your Mac -
Why does my MacBook Pro show a prohibitory sign when I start it up?
On the white screen it starts up as an apple and then turns into a prohibitory sign. It has the spinning thing on the bottom so it looks like its trying to start up but it isn't doing anything and I keep having to shut it off! Help please!!
Start with this:
http://support.apple.com/kb/ts2570
Ciao. -
Help me please!!!
What browser are you using? If it's Safari, uninstall Flash Player and then reinstall it. Also, go to the Safari dropdown menu and choose the option to reset Safari.
-
My MacBook Pro shows a grey screen at start-up how do I fix this problem?
My MacBook Pro shows a grey screen when I try to login and won't go onto my homepage. Why has this happened and how do I fix it?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
my macbook pro is not working properly , when is turned on after then show apple logo and continue show this or nothing
Gray, Blue or White screen at boot, w/spinner/progress bar
-
My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.
I am having exactly the same problem right now. After some research, it looked like my HD was toast. I replaced it today, that part was easy, but now I cannot seem to use my original Install Disk to format the new HD. I get a grey restart screen, or if I get to the Language Selection screen, my cursor is frozen in left corner and I can't use it.
Very frustrating, hope someone else has some ideas!
PS My MacBook was about same age, and "expired" in exactly the same way as yours. -
My macbook pro shows blank screen when I started..help me..
My macbook pro shows blank screen when I started . (It's like in same state when power off. ) fan sound and hard disk is running. So i connected it Through external monitor via mini display to VGA cable. I can see everything on external monitor. My display of Mac needs to change? How much it cost ?? I found so many forum discussion said that if nvedia card is faulty then its happen...let me know suggestions...I given it to apple care service station n they r telling yr display needs to change its cost me a lot.. I can't afford. And can't spend that much for 3 yr old version as new versions of macbook pro is cost vice reasonable.. can I have any suggestion?
If running 10.7 or later hold down Command-R at Startup.
This should invoke recovery Mode.
Choose Disk Utility.
Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
If errors, run again until it comes clean or gets stuck.
Report any error messages. -
hi guys i have an ipad 1 and when i plug it in to my macbook pro picasa opens up and show its name but when i open itunes i cant find the name, ive been working my head out to solve the problem please help me:(
Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software. -
My MacBook Pro showed Spinning weel (SPOD) and when I tried to reboot took ages to restart (20 minutes)now shows SPOD after every command and is extrmely slow
See if you can download and post an Etrecheck report:
http://www.etresoft.com/etrecheck
Ciao. -
iMessage on MacBook Pro shows i'm my friend. My friend's photo and name shows in every conversation instead of mine. How do I fix this?
I am using my own Apple ID. (My father doesn't even have one). I seem to recall having to select a contact or something to assign to my iMessage app when I used it the first time on my iPad. I checked the settings and it is set to my apple ID and correct email address. Any other ideas?
Maybe you are looking for
-
I redeemed a giftcard in one account and realized I wanted to use it in another. Is there a way I can transfer the money from one account to the other without billing my credit card?
-
Can you add one picture at a time from a camera to iPhoto?
Is it possible to enter one picture at a time from a camera to iphoto?
-
Unable to restart the database
Hi, I just shutdown the database and it seems to take a while, don't know if it's stuck or just takes awhile. I try to restart it in another session and get this error: 'ORA-01012: not logged on' Should I wait awhile or is there a solution? Thank you
-
Urgent!!!!!! Issue with String in CO
Hi All, I am learner of OAF. I have issue with string while converting into double. In AM, public String ComputeMarginPercent() retrun form.format((55570.0*100)/184.64999999999418); in CO..I am getting the value: String s1 = (String)oapagecontext.get
-
Finding duplicate items in item master query
Hi.. I need to find the all duplicate items with same foreign name in Item master data ....Query is needed . Regards, K.Ramasamy