Macbook Pro 15" Unibody coffee spill question...

So long story short, my fiance' spilled her coffee and it got into my macbook pro. wasn't a whole cup or anything but still not good. So certain keys are now wigging out which is totally understandable. I will be getting it repaired sometime next week. I did take the mac apart to assess the damage. From what I could see, everything inside was fine "thank god". I removed the logic board, fans, got a good look at the guts, and looks like spill was contained to just the keyboard. One thing I have noticed however since the spill. After closing the lid and the mac finally goes to sleep, upon first dim of the indicator light it will wake it self from sleep for a split second and then go back to sleep again. I've disconnected all outside devices, reset the pram, turned off bluetooth, and problem still persists. My first guess is that maybe the keyboard is sending false key strokes while sleeping because of a short. I opened up the console and it is says "wake reason = OHC1". Any one have any further insight? I have heard that this could be non spill related with this model but I have hopes that it is just a short in the keyboard causing the problem. Aside from a few keys not working and the backlighting only half working, all functions normally. I have been using an apple bluetooth keyboard in the mean time. Thanks for any further insight!

I would not consider trying to trouble shoot it with a known faulty keyboard attached. What do you think you could possibly learn with any degree of certainty?

Similar Messages

My macbook pro 13" unibody has randomly shut down, and will not switch on again, it is totally unresponsive. I have tried using different chargers, and my laptop had charge when it shut down,

My macbook pro 13" unibody has randomly shut down, and will not switch on again, it is totally unresponsive. I have tried using different chargers, and my laptop had charge when it shut down,

Hey Sarahbetts,
Thanks for the question. If I understand correctly, the MacBook will not turn on. I would recommend that you read this article, it may be able to help the issue.
Troubleshooting: My computer won't turn on - Apple Support
Thanks for using Apple Support Communities.
Have a good one,
Mario

Airport not available on MacBook Pro 15 unibody mid 2009, PLEASE HELP!!!!

Ok, so I just recently put in a new hard drive and battery by myself, since my original MacBook Pro hard drive became "corrupted" most likely due to a parallel desktop software I was using. Anyway so I finally install everything on the new hard drive and airport is not working. The icon is NOT EVEN THERE on the menu bar. I go into Network and the only thing I've got is Ethernet and Firewall. I've tried the "+" thing, and it didn't work. I then went into "Assist Me" , then "Diagnostics" and the airport option is greyed out, so is the external modem. Oh, and the operating system is Snow Leopard OS X 10.6.3. Has a 2.8 GHz Intel Core 2 Duo Processor.
I also deleted the "SystemConfiguration" Folder and found something interesting. The "com.apple.airport.preferences.plist" was never there and when I reboot, the "com.apple.network.identification.plist" also disappeared. I had to drag it back into the folder from the desktop where I put a copy just in case something weird happened, which it did.
I checked System Profiler, clicked on AirPort and it gives me stuff under "Software Versions", so I'm guessing it's acknowledging that THERE IS a card and can give me all the information for it, but I can't get the mac to use it. I reset the PRAM AND SMC and still nothin.
So, I figured it must be hardware, right? So I open the mac like i did when I installed the new hard drive and battery, and I CANNOT FIND THE DARN AIRPORT CARD. On the mid 2010 models it's with the bluetooth card at the top and I've tried looking online for ANYONE, who has tried to get to the airport card on the mid 2009 model for the MacBook Pro 15 unibody. And found nothing. I think it's in the clutch, but I'm too scared to touch that area. Does anyone else have any ideas or have I covered all my bases?
I REALLY DO NOT want to go to Apple. I don't have AppleCare and don't have the money to have them poke around and tell me the same thing I already know. And I spent way too much on this computer to not be able to use it to full capacity. PLEASE HELP!!!!!!

From Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices
Your 2009 MBP is not compatible with AirDrop to an iPhone

Mid 2010 MacBook pro took a keyboard spill. It still works but display is sooo dark - like no backlight. I think this is an LED screen. Does anyone know the fix for this?

Hi all... My mid 2010 MacBook Pro took a keyboard spill. It still works but the display is very very dark. A faint image can only be seen at an angle in very bright light. I think this model has an LED screen. Can anyone please tell me what the fix for this is? Thank you sooooo much!
< Email Edited By Host >

Spill Cleaning
Some liquid has just spilled into your Mac. What should you do?
Do
Immediately shut down the computer and unplug the power cord.
Remove the computer's battery (if you can)
Disconnect any peripherals (printers, iPods, scanners, cameras, etc.)
Lay the computer upside down on paper towels to get as much liquid as possible to drip out.
Note what was spilled on your Mac.
Bring the computer into an Apple store or AASP as soon as possible.
Don't
Don't try to turn it back on. Liquids can help electrical current move about the components of your Mac in destructive ways.
Don't shake the computer (this will only spread the liquid around).
Don't use a hair dryer on it (even at a low setting a hair dryer will damage sensitive components).

Flickering intermittent lines on my display (Macbook Pro 15in Unibody mid-2009)

HI all,
My MacBook Pro 15" Unibody Mid 2009 is suddenly displaying strange artifacts across the display - flickering lines of color (seems like red is most common). When this happens if i flex the machine body i can usually get it to disappear. Running an external display works totally fine, even while lines are appearing on the built in display. Another strange symptom - while this is happening sometimes, when i am dragging a file in Finder, it refuses to release from 'dragging' - ie... the OS believes i still have the mouse button pressed down (whether using a trackpad or external mouse) and continues to do so until a restart or sometimes a force quit.
I suspect the display cable (which i have reseated to the connector), though the most effective quick fix while this is happening is pressure on the bottom, middle of the case (which of course worries me).
I should add, tho it seems strange and might be circumstantial - this all started after installing mountain lion (from snow leopard) and the artifacts dont seem to happen when i am running in boot camp.
Hoping this can be resolved by some minimal DIY fix...
Thanks in advance for any help!

Hi,
Not really a suggestion as such, but I have just installed a WD Scorpio Blue 500gb HDD myself. Unfortunately I've been having some issues with it and started a topic on this site to find an answer:
http://discussions.apple.com/thread.jspa?threadID=2518783&tstart=0
I thought you might be interested as it could affect your decision.
Rh

My MacBook Pro (15-inch Mid 2009) question mark on startup

My MacBook Pro (15-inch Mid 2009) has a question mark on startup.
I brought it to my local apple service centre and they told me that after a few tests it was the hardrive, so they changed it under-warranty. Back home I started re-installing my system and got again a question mark on startup.
I decided to put the hardrive in a FW800 external enclosure and boot my system this way and the computer started without any problem. I reinstalled the hardrive in the MacBook Pro and again got a question mark on startup.
I decided to buy another drive, Seagate momentus XT 500Go, transfered all my files in this new drive and I installed it inside the MacBook Pro, still the same question mark on startup. I installed it again in my FW800 external enclosure and everything worked fine.
I decided to installed it again in the MacBook Pro, load the computer via the original Mac OSX install DVD, load the system and try to install a new fresh one on the hardrive... no hardrive were found....
So I decided again to bring it back to the same local service centre, and they told me again it was the hardrive the problem... but they don't want to listen to me when I told them that all my hardrives can startup the computer via an external enclosure....
So I would like your help, I think the problem come from the cable that linked the HD to the motherboard or the SATA chip inside the motherboard, but they don't want to test it !!!!
Thanks in advance for you help, I have been without my computer since 2 weeks now and I can't afford working without it any more !!!
Sincerely
bosa30

You need to take this computer to a real Apple Store. Or call AppleCare. Obviously this "local serve centre" doesn't have the skills to deal with your issue.
I'd also check your RAM, as an easy first step. But I think the HD controller in your Mac is bad, since you can boot from an external drive.

My new HDD for Macbook pro 13" unibody is not recognized and I am using a new SATA cable

Hey everyone,
I have a particular problem that I cannot seem to find an answer to. My new 500gb internal drive for my Macbook Pro 13" unibody is not recognized. The old HDD broke on me so I bought a new one but my macbook pro would not recognize it. To troubleshoot that issue I purchased the SATA cable and replaced the old with the new. The new HDD still will not show up in disk utility.
Please let me know what you think I may have missed or should do.
Thank you

jc1388,
Bring it to an Apple store Genius bar (make an appointment, so you don,t have to wait around forever) they will diagnose it for free and tell you your options/pricing. They have more extensive testing tools, maybe your logic board is failing/failed.
best of luck

Macbook Pro 15in Unibody Wi-Fi Drop and Stay Off / Total System Freeze

Hi.
Up until about two weeks ago I had no issues with my mac. Then I installed Lion and about two days later the following occurred:
Macbook Pro 15in Unibody - drops wifi connection with numerous routers and different locations. I turn Airport Utility off and it won't ever turn back on. Restart is the only option... Alternatively the mac will sometimes just freeze and I can't move the cursor or type at all. Booted into BOOTCAMP partition and that freezes as well.
So, now I have bought a new Solid State Drive and done a fresh install of Snow Leopard. About 5 seconds in and it froze again - so I restarted - and about 20 mins later the Airport Utility did the same issue, dropped the wifi and wouldn't turn back on after I turn it off.
Reset PRAM, Airport Utility did the same again. So far, touch wood, only the one freeze since the new HHD and PRAM reset...
ANY IDEAS AT ALL WHAT THE HECK THIS CAN BE? It is SO annoying I have been scouting the net but can't see an obvious solution. I have however been shocked at sooooo many cases similar to this with the Macbooks...
Thanks guys

Yes it will work just fine. I sell and set them up quite a bit with both PC's and Macs.
All N routers at the moment are all based on draft N protocol, even Apple's own Airport routers. So the Belkin N+ will work at N speeds if you set it to N mode only. Ofcourse for broad compatibility with all sorts of WiFi devices it is best to leave it in mixed mode.
For some background, i have used all sorts of makes of routers from Compaq/TrendNet (favourite)/Microsoft/Netgear (current favourite)/Dlink...and so on over the years, NOT any issues.
Apple's Airport extreme base stations (which are still draft N) aren't any more compatible than a Netgear or Belkin N router.

Where in NYC can I buy a new Macbook Pro 2011 unibody trackpad and the tools i need to replace it myself?

I am going to NYC in a week and I'm wondering if there is a store where I can buy a new trackpad for my Macbook Pro 2011 unibody. I would also like to buy the tools i need to replace it myself. I can't find anything when I search the interwebz.

The problem is that when the machine is closed, it goes to sleep, and in sleep mode, all that goes on is that a bare trickle of power is used to keep the contents of RAM alive. Networking is definitely not active while asleep.
Now, regarding ds store's solution, that's a fairly bad idea. If the machine is just sitting at your desk, you don't need to close it, or if you feel a need to close it you can use Kappy's solution. (Although, it should be noted that apps like InsomniaX and Caffeine do not, as far as I know, keep a machine awake when the lid is shut.) If you're worried about passersby seeing your screen, just activate the screen saver instead. You could even require a password to dismiss the screen saver for added security.
On the other hand, if the machine is being transported, keeping the lid open and the machine running is not a good idea. The sudden motion sensor ought to protect your hard drive against damage caused by moving the machine around... if it's working properly, and I'd rather not depend on an "if" to prevent hardware damage to the machine. Plus, if it's in a bag and you've forced it to stay running, it could overheat due to lack of ventillation.
So, long story short: if you're transporting it, close it and deal with logging back in to the network, and if it's on your desk, don't bother closing it.

If I were to sell my Macbook Pro 15" Unibody...

Hi, I am interested in selling my Macbook Pro 15" Unibody. Would it be best for me to sell it whole, or to sell it as parts?

Here is the thing. Assuming your MBP is under a year old, yours and most everybody elses is covered under warranty. So, you would likely be able to sell the motherboard and possibly the screen fairly quickly, as those components are generally the victims of accidental damage or spillage, which is not covered by warranty. The rest of it will be a little harder to unload until the machine is over a year old. At this point you are likely better to sell as a whole, as resale value on the unibody machines is excellent.

Macbook pro powering on with flashing question mark?

macbook pro powering on with flashing question mark?

You're MacBook Pro can't find a bootable device.
Which version of OS X are you running and which model MacBook Pro do you have?
Clinton

HT201263 My iPhone 3G 16gb in white: I did all the things you mentioned, but it just keep looping the Apple logo and doesn't turn off until it is out of battery, and I am using a MacBook Pro 15inch Unibody if that does matter

My iPhone 3G 16gb in white: I did all the things you mentioned, but it just keep looping the Apple logo and doesn't turn off until it is out of battery, and I am using a MacBook Pro 15inch Unibody if that does matter

If you are in Hong Kong, go to Digital Trade, 1/F, Sincere Plaza, Argyle Street, and it will cost you 120-150HKD, but before you go check that your power button and home button are working correctly, if not press as hard as you can, hope this will help.

Bootcamp 3.1 Macbook Pro 15 Unibody Late 2008 fans working now?

I just upgraded bootcamp to 3.1 on my macbook pro 15 unibody late 2008. I ran Windows Experience Index under win7 Pro 64bit and the fans were humming loud and clear during the test which is a good sign. It runs about the same as when using 9600 in Leopard (very warm). Two finger right click is still a little sketchy, but at least I won't be using my macbook as a frying pan any time soon.

Resetting SMC could solve the problem.
Intel-based Macs: Resetting the System Management Controller (SMC)
And you need to install more RAM, I think.

MacBook Pro 13" Unibody Mid 2012 SSD Dual Drive Installation , i need to install ssd or hdd without removing my optical drive?

salam 3lykum,
my MacBook Pro 13" Unibody Mid 2012 need to install SSD Dual Drive in the enclosure in the laptop, but without removing my optical drive? can one help me. and without cable sata to usb to use it external.

I only know of one 2 terabyte drive that will fit in a notebook - and it comes in an enclosure that you must disassemble to get to the drive -> http://www.amazon.com/dp/B00FRHTSK4/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&coli d=110YIC0GU53A7&coliid=I38PEBUNYX6OUM&psc=1.
HGST does make a 1.5 terabyte drive that would work quite well in your machine - the Travelstar 5K1500.
Clinton

Keyboard covers for macbook pro 15" unibody

Is there a website i can find quality keyboard covers for my Macbook pro 15" unibody for the following programs:
Final Cut Pro
Adobe (photoshop, after effects)
I also was looking around for a clear hard case.. is this one a good one? anyone have suggestions?
http://www.amazon.com/TopCase-Clear-Crystal-Cover-Macbook/dp/B00418QLNW

Depending on where you are it would be called google.xx and a third x when necessary. On another note, the covers on the apple.com site are quite good. I have the moshi one, it is really good. Except maybe that it gets a bit darker with time.

Macbook Pro 15" Unibody coffee spill question...

Similar Messages

Maybe you are looking for