MacBook Pro 15" won't see DVI display behind KVM switch

I have a Gefen single-link DVI switch connected to a 24-inch Dell display. My MacBook Pro will detect the display if I connect it directly to the MacBook Pro's Mini DisplayPort to DVI adapter, but if the KVM switch comes in Detect Displays finds nothing.
Is anyone else able to get their MacBook Pro involved with a KVM switch?

Turns out the cable I was using had pin 16 pulled out on it (for most of our systems using DVI KVM switches this was a good idea). I connected a full DVI cable and then MacBook Pro saw the display.
Then came the problem that when switching AWAY from the MacBook Pro the MBP would act like the display was disconnected, reconfiguring itself to go back to its built-in display only. So then I connected a Gefen DVI Detective between the MBP and the switch and then the MBP would behave as desired, still "seeing" the display even while I was switched away from it.

Similar Messages

Macbook Pro 2011 won't detect external display.

Firstly - I've searched this problem several times now and I've found this problem in four of five discussion topics on this board, each with 4 or 5 pages of people adding "I'm having the same problem" but in all of that there wasn't a single response from Apple, instead they just 'archived' the discussions and hoped that people would just go away.
That's pretty ******* disgusting customer service, considering the amount of money we're paying for your products. You owe us at least for them to ******* work properly - not just ignore major problems, which are clearly present for quite alot of your customers.
For months I've had no problems just plugging my MBPro into an external monitor by DVI using the Apple certified DVI-thunderbolt connector.
For some reason, a few weeks ago, the MBPro stopped detecting the monitor.
I have to spend about 20 minutes ******* around, unplugging and replugging in the leads, restarting with and without the leads plugged in, resetting the p-ram, reinstalling OSX 10.7 and it always seems to be just a random time when it decides to start working.
I'm not just some kid ******* around with an expensive computer for the fun of it. I make a living using this system and I need the big screen for the work I do. I don't have the time to spare every sodding day to be ******* around with **** that doesn't work properly.
At first I thought the problem was restricted to just my work display as it appeared to work fine on all other displays. However, last week I was giving a presentation at work to a company who were potentially about to spend mega bucks giving us some work. I turn on the screen and plug in my computer to show the presentation. Nothing happened. luckily I was able to quickly transfer the presentation to another working computer (a PC) and continue on.
But seriously, please justify spending over £1000 on a computer that can't perform the simplest of tasks without spazzing out?
And secondly - stop ignoring this problem and get fixing it. Now!

Hi, I'm having the same problem, tried to connect both a Viewsonic and a Hanspree. Was happy to find your response here, but I just got the Moshi adapter with the macbook pro so it seems silly it would have gone bad. :/
I suppose I'll take it into the Apple Store and see what they say. Thanks!
^_^

New macbook pro 15" won't detect external display using vga adapter

Hi there
I've tried multiple monitors and connectors but i can't get my mac to detect an external display. it responds as if nothing is connected. I'm fully up to date software-wise.
any ideas?
thanks for any help!!

Hi, I'm having the same problem, tried to connect both a Viewsonic and a Hanspree. Was happy to find your response here, but I just got the Moshi adapter with the macbook pro so it seems silly it would have gone bad. :/
I suppose I'll take it into the Apple Store and see what they say. Thanks!
^_^

I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?

I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?

Run MDP to HDMI for picture. Use a cable like this to run sound from your audio out on your Mac to your TV's audio in. That's about all you can do.

Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists

Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists follow link: http://www.adobe.com/go/kb407111. Have installed Bridge 5.0.2.4; Raw Ref Version 7.0.0.308; DNG converter_8_7_1.dmg; Bridge 5.0.2 Update 2. Also same problem with Lightroom which I don't normally use. Lightroom_3_LS11_mac_3_6.dmg installed.

In the link you posted it states that the Nikon 810 requires ACR 8.6 or newer.
Version of ACR are specific to versions of Photoshop. You cannot use 8.6 nor even 7.0.in CS5.
I believe that ACR 6.7 is the latest that will work with CS5, so make sure you have this installed and get rid of ACR 7.
Having 2 versions of ACR will cause problems.
You have already downloaded DNG Converter 8.7.1.
Have you double clicked the DMG file to allow you to install DNG Converter on your computer?
Be aware that DNG converter is a stand-along application and not a plug-in.
You need to open DNG converter at select the FOLDER that contain your .NEF files.
Don't open the folder and try to select individual files, it doesn't work that way.
After converting your D810 files to DNGs you can then open the DNGs in CS5
The problem is your camera didn't exist when CS5 & its version of ACR was developed.
i don't use Lightroom, but the list mentions Lightroom 5.6 as needed to open D819 so your 3.6 version of LR won't cut it.

MacBook pro still won't back up, not even with a cable.

I backed up my G4 tower wirelessly. I backed up my G4 Powerbook using an ethernet cable to the Timecapsule LAN port. (Of course now that I've upgraded to 10.5.2 neither of their airport cards works anymore. No fix for that so far.)
But the MacBook Pro still won't back up. Not even with a cable. I've tried using the cable to the Timecapsule's LAN port. Nothing. I've tried connecting to the Timecapsule's ethernet port. Nothing.
In fact, when I go into network preferences....ethernet is not even an option for connecting to anything. My choices are: Airport, Bluetooth and Firewire.
Exactly how am I supposed to back up my MacBook Pro? It won't do it wirelessly and I can't do it with an ethernet cable either.
Timecapsule POS!

Hmm...let me see if I can help you. In your Network preference pane, click on the '+'. Then select Ethernet from the drop down menu. After you click OK, you should be able to configure the ethernet interface to connect to your TC. After that, you should be able to connect to it with the your ethernet cable.
As far as your not being able to use your MBP's airport, I'm not certain what that particular problem is - I haven't had any problems with my TC and this MBP that I'm using (indeed, my problem is connecting wireless with my PB G4 (with WPA that is, it'll work using WEP)).
Hope my first paragraph helps you.

My Macbook pro often won't start up since I installed Lion, and I have to shut it down using power button. My desktop icons don't appear and the dock won't open. I only have the little circle of color spinning endlessly. What's wrong now!

My Macbook pro often won't start up since I installed Lion, and I have to shut it down using power button. My desktop icons don't appear and the dock won't open. I only have the little circle of color spinning endlessly. What's wrong now!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

My new Macbook Pro 13" won't register properly on our school's projectors when I try to run PPT!, My new Macbook Pro 13" won't register properly on our school's projectors when I try to run PPT!

My new Macbook Pro 13" won't register properly on our school's projectors when I try to run PPT (Epson EB510)! Instead, colored bars go across the screen against a black background. No matter how much I try to adjust the displays, PPT won't show on it. However, my friend's Macbook Air works fine. She's 10.7.2, I'm 10.7.4, so we're both more or less OS X Lion. What could be wrong? Can I do anything to fix it?

Make sure that your display is not mirrored. Mirroring forces you into "lowest common denominator" screen resolutions that can safely be displayed on BOTH screens, which may not be good enough for the projector.
When you turn off Mirroring, you get Extended Desktop, where the two screens are joined along an edge to form a larger Extended Desktop. To use this, drag a window onto the "other" screen.

I have a new macbook pro. I'm seeing my wife's iphone contacts on my icloud. I can't figure out how to get my iphone contacts synced up with my new macbook and get rid of her contacts. Suggestions?

I have a new macbook pro. I'm seeing my wife's iphone contacts on my icloud. I've done everything I know to do to make sure my apple id is correct and has my information. I can't figure out how to remove her contacts and add my iphone contacts to the cloud or my macbook pro. Any suggestions? Thanks.

You should also ask this in the MacBook Pro forum. This is the forum for the 13” white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro

How do I set up LiveRig or TouchOSC with Mainstage 2.2.2? Both apps send signals but none are received by Mainstage and both the ipad 3 (6.1) and macbook pro (10.7.5) see each other via WIFI?

As I said before both app's send signals but none are received by Mainstage and both the ipad 3 (6.1) and macbook pro (10.7.5) see each other via WIFI on the network set up, which I think I did right. I have tried MIDI Disigner and Mainstage shows MIDI activiti, what can I be doing wrong?
Thanx in advance.

I agree anti-relay can be using UBE feature. However, there is serious problem in reject the spam mail. My nms is using UBE feature to stop spam mail. According to the work flow of the UBE, the mail is received by nms completely and UBE is going to invesgate the mail address. Although UBE can stop the spam mail, the spam mail have a trouble in returning the mail to the sender. The reason is the sender address is usually not existed in the world. That will cause a lot of mail waiting in the mail queue.
In my experience, do not use UBE for anti-relay.

My MacBook Pro 13" won't turn on 90% of the time I try to get it running, and when it does turn on, even on a charger, it shuts down if I stop using it for 2 seconds and it won't turn back on. Should I replace the battery?

My MacBook Pro 13" won't turn on 90% of the time I try to get it running, and when it does turn on, even on a charger, it shuts down if I stop using it for 2+ seconds and it won't turn back on. Should I replace the battery? It doesn't hold a charge either...

EmadJamal,
the battery won’t melt because of long connection to the AC charger, although that has the potential of reducing the battery’s life.
Do you have access to a second 60 W AC charger to test with your MacBook Pro, or access to a second 13-inch MacBook Pro against which your AC charger could be tested?

I did a force close on Safari and after rebooting my macbook pro, i no longer see the Safari icon on the dock. How do i get i back?

I did a force close on Safari and after rebooting my macbook pro, i no longer see the Safari icon on the dock. How do i get i back?

If you can't get dragging to work, just click on Safari from your Applications folder, and it should appear in the dock. Then you can right-click on the icon and PIN it permanently there.

Macbook Pro no longer support Apple Cinema Display after graphic update 1.0

I recently updated my system to ver. 10.5.2 and after that I updated to graphic system 1.0. After that my macbook pro began to have several problems dealing with my 23" Apple Cinema Display.
1- if started in 'closed lid' mode it gives me a kernel panic (shaded screen) error during start up
2- if started in 'open lid' mode it boots fine but whether i decide to close the lid it fails to wake from sleep mode. It starts for one or two seconds and then it gets back to sleep.
So, I made a long time taking test during the weekend and after several "archive and install" I found that this issue is related to the leopard graphic system update 1.0. Somehow this update mess up the way that macbook pro deals with my Apple Cinema Display.
I hope that someone at Apple will address this issue toward a solution in a short time.
I appreciate any other experience in this sense by anybody.
Thank you for any reply.

DGarrett wrote:
Virgin,
Check out the 'Apple Displays' forum and you'll find that you are not alone. MBP/Cinema Display relationship broken since graphics updater. Hopefully an Apple patch soon, or it's time for an Archive and Install w/o updating the graphics.
Best,
DG
Here is the direct link to the Cinema Display forum:
http://discussions.apple.com/forum.jspa?forumID=981

How can I erase the data on my 2009 macbook pro that won't turn on because of a faulty motherboard? Do I just remove the hard drive, install it in a working mac, and erase it that way?

How can I erase the data on my 2009 macbook pro that won't turn on because of a faulty motherboard? Do I just remove the hard drive, install it in a working mac, and erase it that way? Thanks.

You put the internal drive in an enclosure. If you choose to keep the drive, you don't need to erase it.
(110687)

My MacBook Pro 2009 won't turn on. It suddenly won't charge and when it did I shut it down and now it won't turn back on. Charging shows green and the green little dots are showing on the side. I tried smc reset, command p r, what else?

My MacBook Pro 2009 won't turn on. It suddenly won't charge and when it did, I shut it down and now it won't turn back on. Charging shows green and the green little dots are showing on the side. I tried smc reset, command+p+r. Any other suggestions before i take it to apple service center?

A four year battery could be dead. I'd contact an Apple Service Center.

MacBook Pro 15" won't see DVI display behind KVM switch

Similar Messages

Maybe you are looking for