Macbook pro 17 external display.Amazing machine had it for 2 days n Love it
hay a quick question
ive got a new unibody macbook pro 17 (its amazing i love this beast) and a Samsung external display which is a 24inch and im having trouble sorting out the size and resolution with the computer and the display as the laptop thinks the external display is smaller than the laptops display and thus means that the resolution on the display is higher which is just annoying.
Any ideas on know how to change this so its either the same as the laptop or fits better and is the correct size?
if its any help im connected via the mini display port to dvi and the input to the tv is dvi-d and it also has HDMI input if it helps
Is the monitor a monitor, or an HDTV?
If it's an HDTV with a DVI input on it, them I'm willing to bet it's only a 720, since most HDTV's don't jump to 1080 until you get above 32".
I've got a 24" Optiquest monitor on my work PC and it runs at 1900x1200, but it's a true computer monitor.
I've hooked a laptop up to my 52" Samsung HDTV, and it would only do 1900x1200 (which could be a limitation of the video card).
Similar Messages
-
13 inch Macbook Pro External Display Issues (Fully up to date as of 28th of June)
Hi,
Basically I 've got a 13" MacBook Pro which I've been trying to get working with a 20" Samsung SyncMaster 2033HD Monitor using the Displayport/Thunderbolt Port to VGA adapter. I've applied every update even the newest ThunderBolt firmware update which was released today (28th of June) and nothing has got it working. As the photo shows the screen has artifacts at the bottom and the monitor knows it's putting out the incorrect resolution, despite the native resolution being selected
I'm tempted to try a DVI adapter but I don't really want to spend even more money without some indication of it being worth while.
So my questions are:
Is there some way to get the monitor working over VGA that has been discovered by other users?
Has anyone else had success using the DVI adapter where the VGA adapter has failed?
Thank YouDid you ever fix this. I had a macbook pro, and then upgraded to a new one at the beginning of this year with the
AMD Radeon HD 6750M. I have had nothing but trouble with the display adapter since. The monitor keeps blacking out suddenly, or flickering. I tried using a new display adapter, but the same trouble. I tried a different Samsung Syncmaster 193T display, but it also has the same problems. I tried a different Samsung crappy VGA monitor, and it wokrs okay. I think the thunder bolt adapter is more tempremental than a dedicated display port, and there is a bad contact.
Looking around for video drivers, but I doubt that will fix it. As a last resort I may get apple to check the port, but for all the hype, I think the adapter was a cost cutting measure, and the DVI was too bulky to accomodate. The quality is worse. I also have an old Powerbook G4, and the build quality on that was great. The product is not getting better, just promoting different stuff to keep the economy rolling in my view. -
Windows 7/vista & macbook pro & external display unrecognized on reboot
Hello,
I have my new macbook pro 13 with an external display, keyboard and mouse connected. With MacOs that's ok, when I reboot the macbook closed the image comes to the external display all the time (booting the system, too).
But when I do the same on windows Vista or seven (I installed both with the same result) I just can't do it. I have to wait windows to be booted, disconnect the minidisplay to vga cable and connect again, and then, it's again recognized.
I don't know why it does not recognize the external display without doing this. Is there any way to do it?I figured out that you are referring to booting in Windows, and inserting the Snow Leopard DVD, launching the Windows installer. The Boot Camp drivers installer is therein.
I ran this installer, and when I rebooted to Windows, I got a couple BSODs, the display was reset to 640x480, and one time it hung during boot. I managed to view the display adapter driver, and it was blank! I installed the latest NVidia display driver, and it resolved the crashes and hangs, but the external display is still unrecognized when the lid is closed. The best that I can do is to configure dual monitors in the NVidia control panel, and move application windows over to the external display. This isn't useful while the lid is closed because the start menu is located in the MacBook display. -
HT3131 Macbook pro + external display sleeps when lid closed and 'clicking' noise
Hi all, new mid-2012 macbook pro non-retina user, I have an PC external display with Microsoft USB wired keyboard and mouse pair (the keyboard and mouse are wireless but connected via a USB desktop receiver) but even when all connected up, shutting the mac lid always turns off external display too and no amount of pressing keys or mouse clicking wakes up the display again. External display only wakes up when I open the lid again. There's also a clicking noise from the mac every time I close the lid with external display connected. Any ideas? I've tried a number of things, wondering possibly if my cheapo (non-Apple) VGA external display to Minidisplayport adaptor is the culprit? Also, everytime I connect the display I have to go to display settings to get it to recognise the external display. I haven't installed any software for the USB mouse and keyboard , the macbook recognises it ok.
Hi Itsfixed,
It sounds like you are having issues running your MacBook Pro in closed clamshell mode (computer closed but awake, connected to an external display). If possible, you may want to see if it behaves as expected when connected to a wired USB keyboard and mouse as outlined in the first section of the article; wireless USB (non-Bluetooth) keyboards may not be recognized by the system the same way for the purposes of running with the display closed.
Regards,
- Brenden -
Basic questions about macbook pro + external monitor
Hi,
I have some very basic questions about using a Macbook Pro + external display. I don't actually have them but need to know how things works.
So, here they are:
1) Can I use the external display as the main display?
2) Will the external display run with its resolution or with that of the mbook pro?
3) Somewhere I read that you cannot keep the macbook pro open and get the full resolution of the external display. Is that true ?
4) Is it dangerous to keep the mbook closed while using the external display?
5) Does the usage of the external display impact on mbook performance?
I know...a lot of questions , but would be nice if someone could help me.
Thanks.Hi - I am presently using an external display.
To answer your questions in sequence:
1. Yes you can use the external display as your main display. The way to enable that mode is to put your MacBook Pro to sleep, attach the external display. Wake up your MBPro with the lid closed and you will see the external display as you main display. You can alternatively set the external to "Mirror" your notebook by using preferences/display.
2. The external display will run at its resolution although you can adjust and calibrate it using Preferences/Display.
3. Not true. You get max resolution on both displays. Of course you may have to tweak as mentioned above.
4. Not at all. I use this mode all the time. Just make sure you initially set up as mentioned above and your LCD on the MBPro will stay off.
5. I have not seen any performance degradation whatsoever.
Hope this helps. -
Photoshop elements 10 will not migrate to my new macbook pro/retina display. There is no CD/DVD player on this machine. Any suggestions on how to get Elements onto my machine? Yes, I have the disk(s). Am I going to have to buy an external CD/DVD player to load this one program:(
I have ordered a USB3 BluRay/DVD/CD player/burner and will use that both with my iMac ( in which the Superdrive seems to be failing ) and the MBPro Retina I just bought .
-
I am trying to restore my old Macbook Pro data using Time Machine to a new Macbook Air from an external hard drive, but when I restore I get two diferrent loggin accounts and I only wnat one loggin account to access all my data/files?
This web site might answer all of your Time machine questions:
http://pondini.org/OSX/Home.html
Ciao. -
I am planning to replace my 3+ year old MacBook Pro with a new MacBook Pro, Retina display... I have been told by "chat" on the Apple site that I can transfer my data wirelessly... on my network.. Is is a good option? I don't want to invest in cables if I can help it... since the old machine has firewire and the new one has thunderbolt! Will the wireless transfer take forever... as in 30-50 hours??? I've been hearing these horror stories...
Ralph Landry1 wrote:
Recently did one MacBook Pro to another for my daughter...almost full 500 GB HD estimate wireless was 48 hours, wired took a little over an hour.
Wow, shocking in comparison. You have the patience of a Saint ! -
When I turn on my Macbook pro retina display, a black screen show up while I hear the normal start up sound. I noticed that the machine gets very hot, any clue how to make it work?
If the Mac is too hot to touch, take it in for service.
Apple - Find Locations -
Why does Macbook Pro rename my Time Machine and other external hard drives?
Why does my Macbook Pro rename my Time Machine to "Time Machine I" and then back again periodically. Last night it was one name, this morning it is another. It also does it on other external hard drives - usually by adding a I after the name. It is frustrating for me because I store a large runtime folder on an external hard drive and end up losing a lot of time with my computer not being able to find files because of the renaming.
And even though it still looks like Time Machine under "Get info: - when I open a folder window or Disk Utility it has a new name, and there is no way to change it. I've seen other questions that mention Macs renaming themselves, so it seems like a similar issue. I did try deleting the preferences plist file, but that did not work.
Is this a glitch with this particular model or operating system?
Specs: Macbook Pro A1297 - 2009 model.
Snow Leopard 10.6.8
2.8GHz Intel Core 2 Duo
8GB ram
Many thanks for any advice.nachdenki wrote:
strange, my external HDs were added to the exception list automatically. maybe because they wouldn't fit on the time machine volume.
It seems to depend on when the drives were connected. When you first turn Time Machine on, it only excludes the TM drive itself, and any drives not formatted HFS+.
If you connect a drive later on, that drive will be excluded automatically. -
I have a mid 2009 Macbook Pro and I have just bought a 13" macbook pro retina display. I need to run films and presentations remotely., i.e not sitting at the computer.
Does RemoteHD work on a machine without a built in IR sensor, or does anybody know what would work?I can't vouch for this as I've never tried one, but I think this does what you're after.
http://www.satechi.net/index.php/bluetooth/bluetooth-remote/satechi-bluetooth-sm art-pointer -
Macbook Pro Retina Display hard crashes - not caused by Google Chrome
Hi, all. This is my first time posting on these forums, and it is only due to the unsurpassed amount of frustration I have had with my mbpr. I received it in late August, and it worked great. Yes, I had the waking from sleep problem, but that got fixed in an update and didn't bother me too much. What did bother me was when I started installing my games.
I play a ton of games, I have Steam, Diablo III (which Apple during their keynote said is compatible with the retina display resolution and worked with Apple on making it so), WoW and others. Anytime I play any game, it pretty much crashes and I have not been able to find a single solution.
I have tried disabling graphics switching, installing 3rd party programs to disable graphics switching and uninstalling them again, using an external monitor and the built in retina display, verifying/repairing permissions, setting a cap on the FPS in a game as to not make my laptop hot at all (even crashed with a 30 FPS cap), re-installing OS X Mountain Lion from recovery, resetting the NVRAM...
The computer just locks up, goes into a sound loop (like a record skipping very quickly), and becomes totally unresponsive to anything except a hard reset. On wake, it will always display "Your computer has shut down because of a problem, would you like to open the applications blah blah". Basically asking if I want to start where I left off. It never gives an option to send a report to Apple.
Oh also, it can sometimes crash when it's just remotely warm? For example, when I was re-installing OS X ML from recovery the FIRST time (I did it twice), it crashed mid-installation!
The funny thing is, I have windows 7 installed via Bootcamp. Whenever I play any games on that partition...100% fine. No problems, handles graphics beautifully. Using the OS for anything else such as watching videos, downloading music or movies, using any applications is fine. It just seems to be games (or a very small amount of heat? I'm not sure).
Any suggestions? I'm completely stuck on finding any solutions. My experience with the Apple store has been awful in the past, and going to them with any problem is a last resort for me. In the past, I have been able to solve many problems on my own with enough googling and forum digging.
This, after months, is still unsolvable for me. Thanks for any help you might be able to provide.
15" MacBook Pro Retina Display, Mountain Lion 10.8.2, 2.6 ghz i7.
tl;dr: Macbook crashes everytime I play a game or when it gets warm, I'm not sure, help.Sorry that no one answered your question the first go-round - sometimes these things just slip by us.
Most people would have probably just recommended taking your machine to your local Apple Store.
Which is what you did - and all is well now, I'm assuming?
Clinton -
Macbook Pro Retina display says "No batteries available" after legitimate system software update
Issue Description
On July 26, 2012 I placed an order with Apple store for the 15-inch MacBook Pro with Retina display with the following configuration (Order # W269108641 Serial# C02J52S9DKQ5):
Processor 2.6GHz Quad-core Intel Core i7, Memory 16GB 1600MHz DDR3L SDRAM, Flash Storage 512GB Flash Storage
It was delivered August 8, 2012. It cost me $3,265.16
I have since equipped it with accessories like a wireless apple keyboard ($69), wireless mouse ($69), USB super drive ($79), VGA display adapter ($29), Ethernet Adapter ($29) and the excellent sleeve/pouch from Pack & Smooch GmbH (GBP60))
It's so heavily configured because it’s my main workstation. I additionally bought and installed Parallels 8 so I can run Windows 8 in a Virtual Machine because I have a few things on Windows that I need to be productive. This setup has been a dream machine until a little over a week ago.
In the one year since I bought it, I have had only 2 issues;
• A case of display flickering that resulted after a system software update on August 28, 2013
(Case ID 498560320 - not much help came from Apple Support but fortunately the problem went away a week later after another system software update)
• A case of battery failure that resulted after a system software update on October 11, 2013
(Case ID 516534003 - I have gone through all recommendations from Apple support as I will detail below)
Symptoms after system software update
• Battery Icon on status bar disabled with a message "No batteries available"
• Battery not charging
• LED on the Magsafe power adapter no longer show
• Keyboard backlights no longer show
• Notebook fan loud/noisy and permanently at high speed
• Date and time reset to a date in the past at each restart
• Notebook starts up the moment the Magsafe adapter is connected without waiting for power button to be pressed
• An update for "MacBook Pro Retina Display SMC Update 1.2" keeps appearing in Software Update
Recommendations from Apple Support
• Perform SMC Reset (http://support.apple.com/kb/HT3964)
(Done - no change in status)
• Run Disk Utility
(Done - no errors found)
• Run Apple Hardware test (http://support.apple.com/kb/HT1509)
(Done - no errors found, no change in status)
• Visit Apple Store
(Done - they confirmed no issue with Magsafe adapter. For a fee they are happy to change the battery if confirmed faulty and re-install the OS if the battery is not the issue but am uncertain that the OS re-install will resolve the issue because I have read online about a similar case where a re-install did not resolve the issue)
• Check System Report/Hardware/Power
(Done - Health Information/Cycle count:0, Battery installed: No)
• Perform NVRAM Reset (http://support.apple.com/kb/HT1379?viewlocale=en_US)
(Done - no change in status)
Comments and additional Observations
Please note the following;
• All of the symptoms above appeared after a system software update on October 11, 2013
• This update first appeared on October 10, 2013 but I was too busy to apply it especially because it required a system restart
• The battery was fully charged when I decided to apply the update on October 11 morning after I got to work
• Normally on full charge, the battery will typically deliver 3 - 4 hours depending on usage and up to 6 hours when idle
• The said update was not interrupted or anything of the sort
• On the day the symptoms were first observed when I first logged the case with apple, the system ran on battery while it performed the Apple Hardware Test while I was driving to the Apple support store on my way home even though the status bar was indicating "No battery available"
I make the following deductions solely based on my observations
• An apple authorized system software update broke the system
• The nature of the failure is communication related - the battery charging circuit and related systems are not getting the necessary instructions to function as they should (It's a known fact that rechargeable batteries do NOT die instantaneously, the total hours they run on full charge will gradually reduce over time as they degrade on use)
• It’s possible the update is not being applied correctly because the item “MacBook Pro Retina Display SMC Update 1.2” is still in Software update after subsequent attempts to apply it
• The high fan speed is nothing to do with high temperature or high processor load, according to the Activity Monitor utility the highest CPU utilization 1.9 – 4.7% is by kernel_task (PID 0) followed by activitymonitord at 1.8 – 2.2% (PID 481)
• The symptoms match what an SMC reset should resolve according to Apple documentation
• This is a known problem within Apple based on the documentation provided and the numerous similar cases reported online
Summary;
The system is running OS X 10.8.5
I have provided this detailed documentation in the hope that someone who understands this system can say exactly what is going on. It's meant to be a dream machine but now you can hear the fan from across a large room, the battery doesn't charge and is in fact not recognized so I lose data if the Magsafe adapter gets unplugged, and I have to reset the system date each time I restart the notebook.
I've used this notebook with utmost care for a little more than a year, this investment of over $3,500 could have bought 3 high end notebooks from DELL or HP but I chose Apple.
I have suffered untold loss in productivity in the last 10 days since this issue occurred, I respectfully request Apple to fix my notebook.Issue Description
On July 26, 2012 I placed an order with Apple store for the 15-inch MacBook Pro with Retina display with the following configuration (Order # W269108641 Serial# C02J52S9DKQ5):
Processor 2.6GHz Quad-core Intel Core i7, Memory 16GB 1600MHz DDR3L SDRAM, Flash Storage 512GB Flash Storage
It was delivered August 8, 2012. It cost me $3,265.16
I have since equipped it with accessories like a wireless apple keyboard ($69), wireless mouse ($69), USB super drive ($79), VGA display adapter ($29), Ethernet Adapter ($29) and the excellent sleeve/pouch from Pack & Smooch GmbH (GBP60))
It's so heavily configured because it’s my main workstation. I additionally bought and installed Parallels 8 so I can run Windows 8 in a Virtual Machine because I have a few things on Windows that I need to be productive. This setup has been a dream machine until a little over a week ago.
In the one year since I bought it, I have had only 2 issues;
• A case of display flickering that resulted after a system software update on August 28, 2013
(Case ID 498560320 - not much help came from Apple Support but fortunately the problem went away a week later after another system software update)
• A case of battery failure that resulted after a system software update on October 11, 2013
(Case ID 516534003 - I have gone through all recommendations from Apple support as I will detail below)
Symptoms after system software update
• Battery Icon on status bar disabled with a message "No batteries available"
• Battery not charging
• LED on the Magsafe power adapter no longer show
• Keyboard backlights no longer show
• Notebook fan loud/noisy and permanently at high speed
• Date and time reset to a date in the past at each restart
• Notebook starts up the moment the Magsafe adapter is connected without waiting for power button to be pressed
• An update for "MacBook Pro Retina Display SMC Update 1.2" keeps appearing in Software Update
Recommendations from Apple Support
• Perform SMC Reset (http://support.apple.com/kb/HT3964)
(Done - no change in status)
• Run Disk Utility
(Done - no errors found)
• Run Apple Hardware test (http://support.apple.com/kb/HT1509)
(Done - no errors found, no change in status)
• Visit Apple Store
(Done - they confirmed no issue with Magsafe adapter. For a fee they are happy to change the battery if confirmed faulty and re-install the OS if the battery is not the issue but am uncertain that the OS re-install will resolve the issue because I have read online about a similar case where a re-install did not resolve the issue)
• Check System Report/Hardware/Power
(Done - Health Information/Cycle count:0, Battery installed: No)
• Perform NVRAM Reset (http://support.apple.com/kb/HT1379?viewlocale=en_US)
(Done - no change in status)
Comments and additional Observations
Please note the following;
• All of the symptoms above appeared after a system software update on October 11, 2013
• This update first appeared on October 10, 2013 but I was too busy to apply it especially because it required a system restart
• The battery was fully charged when I decided to apply the update on October 11 morning after I got to work
• Normally on full charge, the battery will typically deliver 3 - 4 hours depending on usage and up to 6 hours when idle
• The said update was not interrupted or anything of the sort
• On the day the symptoms were first observed when I first logged the case with apple, the system ran on battery while it performed the Apple Hardware Test while I was driving to the Apple support store on my way home even though the status bar was indicating "No battery available"
I make the following deductions solely based on my observations
• An apple authorized system software update broke the system
• The nature of the failure is communication related - the battery charging circuit and related systems are not getting the necessary instructions to function as they should (It's a known fact that rechargeable batteries do NOT die instantaneously, the total hours they run on full charge will gradually reduce over time as they degrade on use)
• It’s possible the update is not being applied correctly because the item “MacBook Pro Retina Display SMC Update 1.2” is still in Software update after subsequent attempts to apply it
• The high fan speed is nothing to do with high temperature or high processor load, according to the Activity Monitor utility the highest CPU utilization 1.9 – 4.7% is by kernel_task (PID 0) followed by activitymonitord at 1.8 – 2.2% (PID 481)
• The symptoms match what an SMC reset should resolve according to Apple documentation
• This is a known problem within Apple based on the documentation provided and the numerous similar cases reported online
Summary;
The system is running OS X 10.8.5
I have provided this detailed documentation in the hope that someone who understands this system can say exactly what is going on. It's meant to be a dream machine but now you can hear the fan from across a large room, the battery doesn't charge and is in fact not recognized so I lose data if the Magsafe adapter gets unplugged, and I have to reset the system date each time I restart the notebook.
I've used this notebook with utmost care for a little more than a year, this investment of over $3,500 could have bought 3 high end notebooks from DELL or HP but I chose Apple.
I have suffered untold loss in productivity in the last 10 days since this issue occurred, I respectfully request Apple to fix my notebook. -
Macbook Pro Retina Display Disk is locked
Hi,
I have a macbook pro retina display with mountain lion 10.8.1.
Today I shutdown my machine and now when I try to turn it on it goes to a progress bar and spinning and it just turns off itself. I have tried recovery mode and it turns out the disk needs repair and after repair it says it can't be repaired and it should be reformat again. I've tried safe mode but it keeps doing the progress bar and spinning and it turns off again.
I don't know what happened to the machine it was on my desk all the time and it has flash storage so no failing in hard disk and bad sector.
What should I do? (I don't have a external hard drive with GUID to install ML on it and see if I can open my Macintosh HD. And I don't have a Time Machine backup).Do you have any backups? If the answer is no, you've quite possibly lost all your data.
-
Brand New MacBook Pro and Display Adaptor Issue
Hello fellow Mac users, I've been a long-time Mac user and owner.
I just got a new MacBook Pro after using a 2006 model for 2 years and am having a display adapter issue that I need help and advice with:
The new MacBook Pro has the mini DVI display connector, my non-Apple external display is does not support the mini DVI, no problem there, I bought the display adaptor...
Except that it doesn't fit the adaptor that fit the 2006 MacBook Pro.
Please See Image at Link:
http://picasaweb.google.com/lh/photo/sdjOcw1jrddqtAfjAU0Trw?feat=directlink
File comment: This is the adaptor that connected my 2006 MacBook Pro to the the display. It changes the connection from the Mac's DVI to fit the VGA connection of my display. There are the four extra pins around the flat pin to the left of the connector.
Somehow the male end of the mini DVI to the full-size DVI adaptor doesn't fit the female end of the full-size DVI to VGA adaptor! Please see the images. It seems a few extra pins prevent the connection!
Please See Image at Link:
http://picasaweb.google.com/lh/photo/4bG788QVKGCOIJUkzHcjKg?feat=directlink
Comment: This is where the problems begin. The flat portion lacks the four holes needed for the DVI to VGA adaptor to connect.
Is it possible to just remove the four offending pins in the Full Size DVI to VGA Male End?
Any help or suggestions highly appreciated, because as of now, my brand new MacBook Pro is less useful than the 2006 model, which can connect to my external display.
Thanks a lot for your help!Hi Rob with a Mac and welcome to the boards.
My suggestion would be that you simply take the adaptor back and get a mini-display port to VGA adaptor instead.
I ran into a similar problem myself recently when I wanted to connect my own MBP13 to an overhead projector. I had assumed that I could use the mini display to DVI adaptor that I use for the DVI capable external monitor with my new MacBook, combined with a DVI to VGA adaptor that I had for my 2007 MBP, connected to a VGA cable to do the job, but this is not possible.
MiniDisplay to VGA adaptors for the newer MBPs are readily available at Apple dealers or through the online store and not too expensive.
Cheers
Rod
Maybe you are looking for
-
I connected my wifi to my iMac and was asked if I wanted to download the most current update. I backed up my iPod and did the download. My iPod was able to connect to the internet at my friend's house, but it hasn't been able to connect since then, a
-
i get this box that says your firefox profile cannot be loaded......it may be missing or inaccessible...... i just uninstalled it and re installed and this is what i get
-
Idoc to File Strucutre error..
Hi Experts, The scenario is IDOC to File scenario in which i am mapping the DESADV05 idoc at the source side and at the target strucutre i have structure like below MT_Receiver Header --Field1 --Field2 Purc Order --Field1 --Field2 SubHeader --Field1
-
'Internet Explorer cannot display the webpage' issue
Hi, I'm having problem with the web interface. After a few minutes (sometimes seconds) I get 'page cannot be displayed' error. I usually have to wait some time before the logon screen shows again. This happens at different times during the day. I hav
-
I can not install mac os x on my macbook. Please help!!!
Hello, I was trying to install Pro Tools on my Macbook. However, when I was asked for my password to install the program, i completely forgot it. I was only able to find disc 2 of the installation discs in attempt to restore my Mac OS in order to ret