Macbook Pro 17" has screen freezing with multiple color screens.

I had purchased My Macbook Pro 17" loaded with Mac OSX 10.7.5 last year. It was working perfectly untill June end this year. My warranty has expired and now I get repeated freezing of screen and the following error report was generated which says there seems to be some problem with the Kernel. I am quite not sure on what I should be doing next. I did all the recovery options and also did reinstall my mac. Did the PRAM and power reset. Is this a hardware issue or an OS issue. The screen would freeze and I will have to power off manually and after which it would take at least 20 repeated turning on and offs to turn on the laptop. I have taken the backup of all my contents. Now I am desperately looking for a solution. Please Help... Following are the details of my MACBOOK Pro
Macbook Pro 17-inch, Late 2011
Processor 2.4 GHz Intel Core i7
Memory 4 GB 1333 MHz DDR3
Software Mac OS X Lion 10.7.5 (11G63)
Issue:-
Repeated freezing of screen.
What all I had done:-
PRAM, Power reset
Internet Recovery
Reinstalling my OS to factory settings
Tried entering in safe mode and also tried verbose Mode.
All the options which were available on internet was tried to fix my MBP
Following is the Kernel Report I received when the system got turned on.
Interval Since Last Panic Report: 114607 sec
Panics Since Last Report:          1
Anonymous UUID:                    28E93AA0-B19F-41A3-9371-4CB42D0F21BA
Fri Aug 30 19:12:48 2013
panic(cpu 6 caller 0xffffff80002c4794): Kernel trap at 0xffffff80004ec520, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x000000000000000f, CR3: 0x0000000017c7c006, CR4: 0x00000000000606e0
RAX: 0x000000000000000f, RBX: 0x0000000000000000, RCX: 0xffffff800b30e408, RDX: 0x0000000000000000
RSP: 0xffffff80a4b036e8, RBP: 0xffffff80a4b03750, RSI: 0x0000000000000033, RDI: 0xffffff80a4b036f8
R8: 0xffffff80a4b03ef0, R9: 0x00007f8640e16f90, R10: 0x0000000108b85860, R11: 0xffffff80002dad60
R12: 0xffffff800d451930, R13: 0xffffff80a4b03ef0, R14: 0x0000000000000000, R15: 0x0000000000000033
RFL: 0x0000000000010246, RIP: 0xffffff80004ec520, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x000000000000000f, Error code: 0x0000000000000002, Faulting CPU: 0x6
Backtrace (CPU 6), Frame : Return Address
0xffffff80a4b03390 : 0xffffff8000220792
0xffffff80a4b03410 : 0xffffff80002c4794
0xffffff80a4b035c0 : 0xffffff80002da55d
0xffffff80a4b035e0 : 0xffffff80004ec520
0xffffff80a4b03750 : 0xffffff80005388ac
0xffffff80a4b03f50 : 0xffffff80005ce4cb
0xffffff80a4b03fb0 : 0xffffff80002daea3
BSD process name corresponding to current thread: configd
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro8,3 (Mac-942459F5819B171B)
System uptime in nanoseconds: 60423863725
Model: MacBookPro8,3, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.4 GHz, 4 GB, SMC 1.70f6
Graphics: AMD Radeon HD 6770M, AMD Radeon HD 6770M, PCIe, 1024 MB
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.198.19.22)
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK7559GSXF, 750.16 GB
Serial ATA Device: MATSHITADVD-R   UJ-8A8
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 3
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0xfa120000 / 4
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3
Kindly let me know if there is any option to fix it as it is not something that happened cause of my personal issues.
Please Help

- Looks like a hardware failure in the video card.
Make an appointment with the Genius bar, they have hardware testing equipment.

Similar Messages

First version MacBook Pro, 10.6.8, freezes with pixelated screen. Repaired HD with Disk Utility, but still happens. Temp gague shows max of 51C. Any ideas?

I have the first version MacBook Pro, running 10.6.8 (most current OS that works). It freezes with a pixelated screen. This may not happen for weeks, or it may happen every time i restart. I repaired the hard drive with Disk Utility, but the problem still happens. The temp gague shows a max of 51C. Any ideas on what could be causing this?

I have the first version MacBook Pro, running 10.6.8 (most current OS that works). It freezes with a pixelated screen. This may not happen for weeks, or it may happen every time i restart. I repaired the hard drive with Disk Utility, but the problem still happens. The temp gague shows a max of 51C. Any ideas on what could be causing this?

Start Up Screen Freeze With Lines Across Screen

The computer is the iSight version. In moving it from one room to another I shut it down properly. I had a back-up HD with Time Machine which I shut down properly. When I tried to restart it shortly after at the new location, the start up chime sounded and the Apple logo came on with the spinning wheel but the screen had light blue horizontal lines across it. The lines at first seemed squiggly but after restarting a few times, the screen seemed to be divided into vertical columns about 3/4" wide with one column having pixels colored light blue and the next column having the same coloration but the row of colored pixels was above the previous one. This arrangement alternated across the screen. I hope this is clear. After a while the spinning wheel and the screen froze and the computer would not continue with the start up.
I reset the SMU by unplugging the power cord, etc. but this did not work. I tried restarting in safe mode-negative. I tried restarting from the original disc-negative. Initially, it sounded like the disc was working because it makes a distinctive noise when a disc is working in the drive but eventually the same initial screen came on with the wheel spinning and then freezing. I tried the current versions of Techtool Pro and Disc Warrior and neither worked. The same thing happened. The noise from the disc drive but the same screen would come on and then the spinning wheel would freeze. Initially the screen with the Apple and the spinning wheel and the lines came on quickly but after a number of times turning the computer on and off, the screen remained dark with a faint light and when the screen came up, the spinning wheel was already frozen.
I use a flight simulator-X-Plane- a lot and some times when I leave it on, screen saver comes on and when I bring the screen back up, the first screen that came up and quickly changed had to do with X-Plane but not with what I was doing. Also, sometimes when I left it and came back there was a different screen but still part of X-Plane but not the screen I left before. I don't know if this is related to my problem or specific with X-Plane. I brought it up because this is the only thing that was different prior to this problem but may not be related. Right now, I've turned it off(obviously) and disconnected the power cord and the keyboard.
Any help would be appreciated.

I've started taking the iSight apart. Detaching the plastic took some time and care but with only a few tears. Separated the screen. The main board is positioned such that the capacitors are on the bottom. So many connections and most of them small. Have to be careful. So many small screws. I hope I can remember where they all go when I put everything together-I hope. I'm at the point where I've turned the main board over so that the capacitors are showing. I hope I can reconnect correctly. Two capacitors have a slight bulge at the top compared to the others. Although I am not sure whether these two are part of the problem. There is another one that has no bulge but there seems to be some stuff on the top. It is not corrosion so I'm not sure whether it was manufactured that way or something is wrong with it. I finally found the battery. Just to change it is such a job. You have to disconnect a lot of stuff and turn the board over to get at it unless Apple technicians have a shortcut. Do you think the battery could cause the problems I have? Anyway, if I have the board exposed already might as well try and change the capacitors. I have not come across any video that shows how to expose the underbelly of the main board. Nor have I seen any video that shows what each part is. On the left side of the layout is an long rectangular shape covered over with black plastic. I haven't checked it out but I assume it is the power source. At the upper left there is a rectangular board with capacitors underneath but there are connections underneath that are so tightly stuffed that I couldn't turn it over but I could lift it up a little and see the heads of some capacitors and there wasn't any bulging capacitors or corrosion. There's one big capacitors under there. Much bigger then those on the mother board. Interesting observation. When I turned the screen over to expose its back most of it was frosted except for a small rectangular piece that was dark but glassy like and the glass like part lies exactly on the small rectangular board about 4X5 or 4X6. Interesting why this small section of the back of the screen should be different from the rest of the back and why it should be exactly above the smaller board. Like the previous versions of iMac, it would be so easy to be able to open the back and have all of the capacitors exposed. My next action is to contact one of the references you posted and see if I can get these three capacitors and the battery from Radio Shack or somewhere and solder the capacitors to the mother board. After all of this putting the whole thing together correctly without ending up with extra parts. One thing did break. Next to the fan in the middle there is a piece of metal attached to the back. There is a small narrow slot in this metal that another piece of bent metal seems to go into and was soldered to it and when everything is put together it seems, although I'm not sure, that this metal touches the back of the screen. It looks like I have to solder it back. I don't know what its purpose is, maybe it grounds the screen? I thought the piece of metal was something to pull in order to liftup something else. So far that is the only thing that has broken and hopefully can be easily fixed. But nothing that seems easy is easy.

MacBook Pro (Retina, Mid 2012) freeze with Yosemite

After installing the OS X Yosemite my MBP Retina starts freezing due to graphic problems. The only option is to restart the Mac
How to find the problem and solve it?

Safe Mode doesn't help. I have the same problem with a Mid 2012 MBPr with a fresh OS X 10.10 installation (no upgrade). In energy options I have enabled automatic graphic card switching, so my system is using the Intel HD Graphics 4000 mainly. The logs show a "GPU Reset" event:
Mon Oct 20 20:36:37 2014
Event:               GPU Reset
Data/Time:           Mon Oct 20 20:36:37 2014
Application:
Path:
OS Version:          Mac OS X Version 10.10 (Build 14A389)
Graphics Hardware:   Intel HD Graphics 4000
Signature:           801
Report Data:
===========================================================================
                         Intel GPU Hang Summary
                              version 1.0.0
===========================================================================
-- Summary of Status for ALL Rings --
MAIN Ring is idle
MEDIA Ring is NOT enabled
BLT Ring is NOT enabled
===========================================================================
                     Essential Ring Registers
===========================================================================
-- MAIN Ring --
RING_HEAD   = 0x00000048 (offset = 0x00000048, wrap count = 0, wait_for_cond = 0x0)
RING_TAIL   = 0x00000048 (offset = 0x00000048)
RING_START = 0x10204000 (offset = 0x10204000)
RING_CTRL   = 0x0000f001 (enabled, auto report disabled (0x00), not waiting, semaphore not waiting, length = 0x010 4KB pages)
-- MEDIA Ring --
RING_HEAD   = 0x00000000 (offset = 0x00000000, wrap count = 0, wait_for_cond = 0x0)
RING_TAIL   = 0x00000000 (offset = 0x00000000)
RING_START = 0x00000000 (offset = 0x00000000)
RING_CTRL   = 0x00000000 (disabled, auto report disabled (0x00), not waiting, semaphore not waiting, length = 0x001 4KB pages)
-- BLT Ring --
RING_HEAD   = 0x00000000 (offset = 0x00000000, wrap count = 0, wait_for_cond = 0x0)
RING_TAIL   = 0x00000000 (offset = 0x00000000)
RING_START = 0x00000000 (offset = 0x00000000)
RING_CTRL   = 0x00000000 (disabled, auto report disabled (0x00), not waiting, semaphore not waiting, length = 0x001 4KB pages)
- Common Slice INST_DONE register -
All Common Slice engines are done.
   - INSTDONE_CS (=0xffffffff): Not done =
I already tried a PRAM- and SMC Reset, booted up in Safe Mode, repaired permissions. Since I disabled the automatic switching of graphic cards in system settings (so that it uses my NVidia Card as default), there are no freezes anymore. There seems at least one more user with the same problem:
Yosemite graphics problem?

Mid 2010 macbook pro that has sleeping issues

I have a mid 2010 macbook pro that has had problems sleeping and the screen goes randomly black but does not put the actual computer to sleep and you can still see and move the cursor. It seems like tons of people have had the same issue. I recently updated the software to mountain lion but it did not help. The problem is when I close the lid, it does not go to sleep and wastes tons of battery or goes black while i am working on it. HELP!

Order a new battery.
Solution may be found if you search in the "More Like This" section over in the right column.
User Tip: Apple notebook batteries – maintenance and troubleshooting
Batteries
Apple/About This Mac/More Info/Hardware/Power/Battery Information - copy and paste the information here. Do not include any serial numbers.

When i turn on my macbook pro it has a black screen and just beeps quickly 3 times with a pause and then repeats.

when i turn my macbook pro it has a black screen and it beeps 3 times in succession with a pause and then repeats the beeping and so on.

If you replaced the Ram in your machine at any time, you may not have been aware of the fact that Apple computers have always been a little picky when it comes to 3rd party Ram. Apple computers have always run very well on 2 different brands.
Memory for iMac 2GB, 4GB, 8GB, 16GB, & now 32GB - OWC Certified RAM for Apple iMac with Lifetime Warranty
This first link is from other world computing and none of us on these forums to my knowledge have heard of any bad ram from either Other World Computing
or Crucial Ram.
Crucial Ram
The only difference I am aware of is that Crucial offers a download and will tell you exactly what Ram your computer is capable of using and the prices that are available.
Resolving Kernel Panics
HOPE THIS HELPS IN SOME WAY
DON

TS3824 My MacBook Pro freezes with a white screen after I log in.

MacBook Pro freezes with a white screen after I log in, support says to download an update, but if it
s frozen, how do I update?

Thanks for posting back your solution. It will help others w/the same problem.

MacBook Freeze with lines on screen

I have a 2.1 CTO with 120 GB HD, 1 GB RAM and 256 video RAM. I have experienced three computer freezes with an associated screen display that has diagonal lines as shown in this image:
<http://homepage.mac.com/strait/Sites/Macbook/pages/MacBook%20Freeze%20Screen.h tm>
The lines have active pixels that turn on and off during the freeze, making the lines appear to be slightly animated, or "sparkly." The computer must be restarted with the power button after the freeze.
The freeze has happened once a day and is not associated with any specific activity. The first time it happened was right after receiving the unit before I added any software. No programs were open.
The second time occurred while using Front Row and viewing a DVD, and after adding software (MS Office and Adobe CS programs).
After this, I ran the Hardware Test (short and extended) and there were no problems discovered. I then Erased and zeroed the disk and reinstalled the OS and all the Apple software, plus my software. I then added an additional 1GB of Crucial RAM.
The third time occurred with no programs open. I reran the hardware test and again had no problems. I then removed the extra RAM, but the first two incidents occurred with only Apple installed memory.
I have had the computer for three days and have had three freezes.
Any thoughts on this?
Dave
G5 2.5 GHz Quad, 6.5 GB RAM, NVIDA 7800 GT Mac OS X (10.4.5) MacBook Pro 2.1 GHz

Well ive had this once or twice and the only time it has ever happened has been first time just after logging in and the other couple of times when waking up from being asleep.
Exactly the same screen as the first poster.
I do hope this is just a bug in a dodgy driver or something that will be fixed with a software update or some firmware update, i really do not want to part with my nice new MacBook and faff about with support calls because:
a. ive just got it setup the way i want, and
b. it works fine 99.999999% of the time
Oh and ive rebuilt the whole system from scratch, but that was for a different problem with .Mac not syncing correctly.
Ste

Hi, I was wondering if someone can help me. I have a MacBook Pro, it has came up saying I need to free up space on the disk as it full every time it starts up, so I log in and no icons or applications show up on the screen just my background wallpaper, t

Hi,
I was wondering if someone can help me. I have a MacBook Pro, it has came up saying I need to free up space on the disk as it full every time it starts up, so I log in and no icons or applications show up on the screen just my background wallpaper, the only thing I can do is the force quit keyboard shortcut but there is nothing to quit, I have tried to start up in safe mode but again there is no icons in the desktop,
I have my disks that came with my laptop I have went into disk utility to repair disk and I still seem to have the same problem .. No icons or apps or anything lol just the cursor I can only shut down the laptop via power but and the press shut down.
Please help I am going out my mind with this thing :(
Thanks x jade

This can be used to boot the machine and delelte enough files to get it to boot normally.
.Create a data recovery/undelete external boot drive
Read about storage drive so you can store your extra stuff.
Most commonly used backup methods
Also here to see how a full boot drive slows the machine down
Why is my computer slow?

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something"sign... it just doesn't start the system....

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
Please help
Marcelo

If there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
Gray, Blue or White screen at boot, w/spinner/progress bar
Also take this time to backup your users files off the machine if possible.
Most commonly used backup methods
Sometime that won't work and you need to do more
..Step by Step to fix your Mac

I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck and will post the output. Please can someone help me with what it all means.Thanks in advance

I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck. Please can someone help me with what it all means.
Thanks in advance.
EtreCheck version: 1.9.15 (52)
Report generated 19 September 2014 08:07:14 GMT+8
Hardware Information: ?
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:4:29
Disk Information: ?
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (147 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R   UJ-898
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.4 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.4 - SDK 10.4) Support
[loaded] com.sophos.kext.sav (9.1.55 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.1.50 - SDK 10.8) Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.sophos.autoupdate.plist Support
[running] com.sophos.configuration.plist Support
[running] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
[running] com.sophos.scan.plist Support
[running] com.sophos.sxld.plist Support
[running] com.sophos.webd.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
Launch Agents: ?
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[running] com.sophos.uiserver.plist Support
[running] com.trusteer.rapport.rapportd.plist Support
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
[running] com.amazon.music.plist Support
[loaded] com.google.keystone.agent.plist Support
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
User Login Items: ?
iTunesHelper
TomTomHOMERunner
AdobeResourceSynchronizer
Dropbox
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
DivX Web Player: Version: 3.2.1.977 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
EPPEX Plugin: Version: 10.0 Support
Default Browser: Version: 537 - SDK 10.9
OVSHelper: Version: 1.1 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.7
Safari Extensions: ?
Ultimate
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Perian Support
Trusteer Endpoint Protection Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 160.38 GB
Destinations:
Data [Network] (Last used)
Total size: 2 TB
Total number of backups: 99
Oldest backup: 2012-04-20 17:05:32 +0000
Last backup: 2014-09-18 23:49:25 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
      6% InterCheck
      5% iCalExternalSync
      3% WindowServer
      2% CalendarAgent
      2% SystemUIServer
Top Processes by Memory: ?
152 MB SophosScanD
147 MB InterCheck
106 MB SophosAntiVirus
66 MB Dropbox
57 MB com.apple.iTunesLibraryService
Virtual Memory Information: ?
161 MB Free RAM
1.55 GB Active RAM
1.41 GB Inactive RAM
902 MB Wired RAM
611 MB Page-ins
0 B Page-outs

Uninstall Trusteer software
http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
Remove Sophos
https://discussions.apple.com/message/21069437#21069437

Have MacBook Pro (ancient) has 2.16 Ghz Intel Core Duo with 1 GB 667 MHz RAM using OS 10.4.11. Can I upgrade OS? If so, how far? And can I add more memory? I realize this is an old laptop but I need to wait to upgrade to new.

Have MacBook Pro (ancient) has
2.16 Ghz Intel Core Duo with
1 GB 667 MHz RAM
using OS 10.4.11.
Can I upgrade OS? If so, how far?
And can I add more memory?
I realize this is an old laptop but I need to wait to upgrade to new.

if it is the core duo, mac OS X 10.6.8., max ram 2gb.

I have a 2010 vintage 13-inch MacBook Pro that has a 60 watt power adapter. I also have an older power adapter that is 65 watts. Is it okat to use the 65 watt with this MacBook Pro?

I have a 2010 vintage 13-inch MacBook Pro that has a 60 watt power adapter. I also have an older power adapter that is 65 watts. Is it okat to use the 65 watt with this MacBook Pro?

yes.
"For instance If you have a MacBook (13-inch Late 2009) that normally uses a 60W adapter, you can also use an 85W adapter with that computer. You would not use a 45W adapter with that computer; it would not provide enough power for that MacBook. Using an adapter of higher wattage than the adapter that came with the computer will not cause the computer to charge more quickly or otherwise operate any differently than using the adapter that came with the computer. "
http://support.apple.com/kb/HT2346

The battery for my Macbook Pro 13 "has only 121 cycles and is not charging anymore, my Mac is telling me that it is necessary to exchange it. You have any tips for me to find out what might be happening with my battery?

The battery for my Macbook Pro 13 "has only 121 cycles and is not charging anymore, my Mac is telling me that it is necessary to exchange it. You have any tips for me to find out what might be happening with my battery?

Guys, i am actually trying using a solution provided by the article shared by dominic23,
It says "Another option is to get an ionizer to help the atmosphere in the workplace be more conductive and pull charges away from contact surfaces, including yourself."
So in my home, we have such device that could clean the air using ion, and i am using it in my room...
Result: BANG!!! The electric shock on my macbook has gone!! I don't really care about physics but somehow it works! You guys should give it a try.
Thanks again dominic23

I purchased Macbook Pro i5 in March 2011. Now the screen has problem; one vertical blue line is in the screen (at the right side). I noticed this last week when I opened the MacBook, and now I am always seeing it. How to remove it?

I purchased Macbook Pro i5 in March 2011. Now the screen has problem; one vertical blue line is in the screen (at the right side). I noticed this last week when I opened the macbook and now I am always seening it. I am seeing the blue vertical line always in the screen. However, I am not seeing this line when I open Word, Excel, PowerPoint files (without pictures). But I am seeing this line always when I see movies, pictures, and all the files which have pictures. Please do let me know how can I remove this vertical blue line (blue tint) pernamentally from the screen.
Regards,
Ujjal

Backup your files to a external hard drive and disconnect.
Call Apple and make a warranty call, then take it to the nearest Apple Store etc.
You can run these things and it might clear your issue or give further informaiton
Perform a hardware check
http://support.apple.com/kb/ht1509
Then see if resetting the SMC/PRAM resolve your issue
http://support.apple.com/kb/HT3964
https://support.apple.com/kb/HT1379

Macbook Pro 17" has screen freezing with multiple color screens.

Similar Messages

Maybe you are looking for