MacBook Pro 17" Will Not Install Boot Camp

Has anyone else found that Boot Camp will NOT install on a 17" MacBook Pro? We were able to partition the drive and install Windows but when we tried to install the Mac Drivers we kept getting the error message "this software will not install on your hardware". This is very frustrating as we bought the 17" specifically to run both Mac OSX and PC Windows. Has anyone got any ideas?

You may need to wait until Apple updates the drivers or you could try extracting them from the package then installing them that way

Similar Messages

15" Core Duo Macbook Pro Distorted Display after installing Boot Camp

I just put Leopard on and decided to use Boot Camp to install Windows XP Pro. After Windows Installed and I put on all the drivers I booted up to the Mac Side and then shut it down. After a while I booted it back up again and the display was all distorted I was able to fix the problem by reseting the PRAM and NVRAM but the problem keeps happening everytime I boot to the Windows side and then Shutdown. Is there any fix for this and does Apple even know it's a problem?
Thanks,
James

After a LOT of reboots, I've found a pattern AND SOLUTION for the problem:
For having this to happen, you have to be in OS X with everything normal then switch in Windows, then restart in OS X. (not a shut down) The screen goes inactive during the boot, but when in OS X, everything is normal. At the next boot though, the colors SHALL be all wrong, during the boot and once in the OS too. (Mac and Windows)
But I discovered that it happens only when you RESTART, not when you shut down the computer and then power it up. Seems like a parameter problem when Windows restart.
So my solution to stop having to reset the PRAM is this: when in Windows and wanting to go back to OS X, do not restart, shut down the computer and power it up to choose OS X. I hope this will help some people.
Olivier
P.S.: Restarting from OS X seems fine for now, no problem at all.

HT3964 I have a MacBook Pro that will not boot up. The apple symbol Read more: I have a MacBook Pro that will not boot up. The apple symbol is there and a spinning wheel continues to spin. Any options??

I have a MacBook Pro that will not boot up. The apple symbol is there and the spinning wheel keeps spinning. Any idea how I can fix this?

Reinstall OS X.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
OR
Reinstall Snow Leopard without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

HT1338 how do I boot a MacBook pro that will not shut down

HOw can I reboot shut don MacBook pro that will not shutdown, please help.....?......

Hi, I'm having similar problem. I just got a Lacie ext drive to back up my photos and vids and now my laptop wont shut down or go to sleep properly. May or may not be related to Lacie. Could just be a coincidence.
I first noticed problem when I closed it to go to sleep and the apple logo kept flashing on and off.
When I opened the laptop the screen was flashing white then black, then white then black. Had to force shut
it down (opt, cmnd,power), had to hold it down a very long time before it responded. However, that didn't keep it shut down. It just started back up again. But at least it wasn't flashing.
Then when i tried to shut it down normally it would shut down, go black for a moment and then the Apple song would play and it would start back up again. It also won't stay asleep. It sleeps for two seconds when put into sleep mode then snaps awake.
strange problem... Very annoying. Next option is to unplug and let battery run out.

My 2008 MacBook Pro (A1260) will not startup

Greetings!
I was given a 2008 MacBook Pro that will not startup. I press the power button and it trys to start for like 5 seconds and goes no further. The battery is fully charged and the powercord is pluged in. I know that Apple has it listed a "Vintage", but I'd like to get it working. Any suggestions?
Thanks,
David

David,
were you also given two grey installation DVDs which originally came in the box with your MacBook Pro, called “Mac OS X Install Disc 1” and “Mac OS X Install Disc 2”? You’ll need those discs to be able to further diagnose the current problem. If those discs weren’t given to you, you can purchase a replacement pair from Apple.

After recent update to my macbook pro itunes will not open, it just bounces when I click on it

fter recent update to my macbook pro itunes will not open, it just bounces when I click on it

Means they are going to mess up your iPhoto Library pictures database so it's unreadable by older versions of iPhoto on older OS X operating systems.
You have the choice to right click on the iPhoto Lbrary and inside is a folder called Origianls, use the Finder to Duplicate this folder, then move the OriginalsCopy out of the iPhoto Library folder and save it elsewhere.
I dont' think Apple will every intentionally touch the originals, however it's possible they could.

My MacBook Pro persistently will not connect to my wireless router. The message "connection timeout" appears. What is a connection timeout and how can I fix?

My MacBook Pro persistently will not connect to my MiFi Verizon wireless router. The message "connection timeout" appears. What is a connection timeout and how can I fix?

Hi there terri900!
You may want to try configuring your router settings to match the recommended settings for iOS and OS X devices, which can be found here:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
You may also find some helpful information for troubleshooting this issue in this article, which can help you with any manner of issues with Wi-Fi connections:
Wi-Fi Quick Assist
http://support.apple.com/kb/HT1145
Take care, and thanks for visiting the Apple Support Communities.
-Braden

My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection

My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection

As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

I HATE my new MACBOOK PRO, it will not let me open any PDF files and I downloaded the ADOBE READER three freaking times and it keeps saying that all the files are corrupt. I would rather have my 2008 Dell at this point. what is wrong with this thing

I HATE my new MACBOOK PRO, it will not let me open any PDF files and I downloaded the ADOBE READER three freaking times and it keeps saying that all the files are corrupt or damaged. I would rather have my 2008 Dell at this point. what is wrong with this thing

Perhaps the PDF files are corrupted.
Hit the command key and spacebar, a blue Spotlight in the upper right hand corner appears, now type Preview and press return on the Preview program.
Now you can try opening the PDF's from the file menu and see what's going on.
If they are corrupted, perhaps they are trojans from your Windows PC or gotten from a bad location online.
Download the free ClamXav and run a scan on the possibly infected folder.

HT3964 2009 macbook pro superdrive will not load discs

2009 Macbook pro superdrive will not accept discs. The loading mechanism appears not to be responding. The mechanism may be jammed as it will not allow the disc to be fully inserted. Last time I played a disc I had trouble ejecting it. I managed to get disc out can't remember how. Think the disc must have partially ejected and I managed to pull it out. Can anyone help?

Hi kayj128,
Thanks for using Apple Support Communities. This article has steps for troubleshooting the SuperDrive built in to your Macbook Pro:
Apple Computers: Troubleshooting the slot-loading SuperDrive
http://support.apple.com/kb/HT2801
Doesn't accept discs
Be sure to check your disc to make sure it is flat. You can check this by putting the disc upside-down on a flat surface. If the disc is bowed up on any side or in the center, do not use the disc because it might get stuck in the drive. Do not use discs that have anything attached to them or dangling from them (such as "sweeper" or cleaning discs).
If the drive struggles when you put in a disc or stops part-way, carefully look at the disc for labels that may be interfering. If there aren't any raised labels then try putting the disc in a few more times.
Try another disc to see if the issue is being caused by a specific disc.
Make sure you insert the disc far enough for the drive mechanism to activate. You need to insert discs nearly all the way before the drive will activate and pull them in. If you don't completely insert a disc, the drive will reverse and push the disc back out.
Allow the drive one or two seconds to accept the disc while it is fully inserted.
Reset the System Management Controller (SMC).
If the drive repeatedly does not accept discs, contact Apple or an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store.
Cheers,
- Ari

My macbook pro battery will not hold charge

My macbook pro battery will not charge. The laptop will only turn on after it has been plugged in to charge, and when unplugged it automatically dies. When plugged in the battery indicator is green and the top right corner of the screen says "Not charging". I left town for a week with the laptop off and I came back in town and it won't charge. What can I do to fix this?

If you are under warranty call Apple and get a case number.

My Macbook Pro suddenly will not charge. I tried using 2 different cables and it still will not charge. What should I do??

My Macbook Pro suddenly will not charge. I tried using 2 different cables and it still will not charge. What should I do??

Look at the power adapter connection on the MBP and make certain that it is clean and not discolored.
Trya SMC reset:
http://support.apple.com/kb/ht3964
Ciao.

MacBook Pro 2010 will not power up. Just clicks.

MacBook Pro 2010 will not power up. Just clicks.

Hi mzantop,
Thank you for using Apple Support Communities.
So you get no video or startup chimes but do hear clicks from your MacBook Pro.
Please check out this article for troubleshooting steps
If your Mac won't turn on - Apple Support
Hope it gets going.
Nubz

Macbook Pro suddenly will not connect to the internet via ethernet cable.

I know this is a long shot... but I figured I would give it a try.
My macbook pro suddenly does not connect to the internet via ethernet cable. Please bear with me, as I am not very tech-savvy - I will try my best to describe the symptoms!
I connect to the internet via ethernet (we don't have wifi). It was working before I went to work, and when I came home I suddenly couldn't get anything to work (I know everyone says this, but I truly didn't mess with anything). Internet browsers just think for awhile and then turn up the 'You are not connected to the internet' error.
I went into my network preferences and curiously, the 'Ethernet' shows a green dot and says 'connected'. However it says 'Authentication server is not responding' underneath the last part that says '802.1X: WPA: eduroam' (I think that is my user profile).
When I go into my 'security' settings I can see that my firewall is off, so that shouldn't be causing any problems.
I've tried restarting the router and computer itself many times. Diagnostics just gets to a certain point and reports back 'Network Diagnostics cannot fix the current networking problems.' I've also tried switching to a different ethernet cable, and I tried both cables out on a PC laptop and it connected without issue. Additionally, I brought my macbook along to a friend's house and it connected to his wifi just fine, so the problem appears to just be with ethernet connections.
I know it's hard to troubleshoot this kind of thing without being there and having a look at the computer yourself, but any tips wouild be greatly appreciated.

As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

Acrobat Pro 10 will not install keeps rolling back

I am attempting to install Adobe Acrobat X on a Windows 7 64 Bit machine, it will not install, gets all the way to the end and then just starts rolling back says the installation was interrupted and that no changes were made to the system.
I ran the msi from the command line with verbose logging on to see if I could figure out where it fails but couldn't find the error (towards the end it lists many errors but it seems to just be a list of possible errors, not sure but I definately have admin right and ran the msi as an admin so at least those two don't make sense).
I don't understand why its not installing but I'm really ticked its not at least telling me why its not installing. I had adobe reader and flash on the computer and I was afraid they might be newer versions than just straight Pro X so I uninstalled everything adobe on the computer and it still won't install the Pro X.
Can someone take a look at my log file and see if they can tell what I'm doing wrong? It would be very appreciated.
Thanks, SW.
Log file link
https://docs.google.com/open?id=0BwFRNdTQrK4sc3Q1aV9uMl9uZXc

One thought. Have you tried downloading the updates (http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows) and installing directly, rather than doing updates through the help menu?

MacBook Pro 17" Will Not Install Boot Camp

Similar Messages

Maybe you are looking for