Macbook pro 17" wont boot up

Greetings,
I left my macbook working on my desk , when i came back back the computer was in sleep mode, the computer woke up but the screen did not turn on, however i could hear the sounds of OS X when i clicked on the volume keys but no video. after holding the power button for 7 seconds the computer turned off. when i tried restarting the computer the sleep light would light up and remain solid, but it would not boot.
Took the ram out and the sleep light blinks 3 times, but when i put the ram back again but it goes back to the solid sleep light with out doing nothing
some steps i took
-battery is fully charged and it charges the battery
-unable to do a pram
-took off battery and disconnected form wall and hold the Power button for 8 second
i would also note that this machine had the logic board replaced due to the nvidia 8600gt recall.
Thank you in advance
-Illankid

well i took my mac to an apple authorized service center, the tech told me that computer does not boot up and thus they are not able to perform the "nvidia test" which mean that the laptop does not fall under the recall. so im stuck on ordering a new logic board on my dime.ill update on my decision.i am missing it.

Similar Messages

  • Macbook pro a1150 wont boot past kernel, stuck on gray screen.

    got a macbook pro a1150 ati 1600 gpu.  last for characters in sn are vww.  will not boot past gray screen after the gray screen with the apple logo.  it has a fresh install of 10.6 on a new hard drive from a laptop of the same exact kind.  when in target mode and its Hard Drive used as a boot divice, it will boot.  no broken graphic on startup with the apple icon and the pin wheel spinning.  boots to safe mode just fine, will even do updates.  but will not boot from the NEW hard drive or the dvd rom.  when i put the old hard drive in with 10.5 it wont boot past the blue screen and the same with the 10.5 install disc i baught.  reset pram, changed ram, removed wifi card and even tried disconnecting the dvd rom but still will not go to the login screen.  even disabled auto login (when it was in target mode).  do i reflow the gpu? is it a gpu problem?  one thing strange.... in safe mode, lines show up on the mouse icon and just that.  the rest of the screen shows everything fine, i've seen this before with the nvidia chipset but not with ati.  how do i fix it?

    to better explain... the macbook pro in question never get to the blue startup screen which happenes before the login menu.  not though dvd rom, hard drive, external dvd rom or external hard drive.  just stop there.  i hear the hard drive working / dvd spinning and the computer reading the disc but after a few min of just seeing the grey screen both would spin down.

  • Macbook pro (retina) wont boot - can't get to recovery

    I'm having a bizarre problem with my Macbook pro retina 15".
    I was using bootcamp/booted into windows and playing Star wars the old republic when the machine suddenly froze, then the display started going into lots of squares of multiple colours.
    When I try to boot in to OSX it freezes after the apple logo and the small cirle stops. If I try get to the recovery by pressing cmd + r the same thing happens. I've also tried using the internet recovery option, the same thing happens after it connects to my wifi etc.
    If I press alt during bootup to get to the different drives to boot from, the icons (i.e. OSX or bootcamp) are displayed but are slightly brown and look a bit distorted. If I select bootcamp and try to boot into windows the squares/distorted screen issue starts again.
    I have also tried booting from a mountain lion install usb i made - same probelm as above: freezes after apple logo.
    I've also tried resetting the PRAM/NVRAM or whatever its called.
    Does anyone have any ideas I can try as I can't call Apple care til Monday now?
    Thanks

    Nope. Your only option is to take it to an Apple Genius Bar as your system is FUBAR. More then likely a hardware problem from over heating.

  • Macbook pro 2011 wont boot

    Hi,
    I need a help regarding issues with my macbook pro. I am getting bluescreen on start up. Here is a link: https://www.youtube.com/watch?v=lzryrh5x-Rs
    I did new reinstall of mountain lion but it was working for about 10min, after I did first update, I did restart but it just stopped at grey screen.
    I went also to apple shop, they did tests and said that all HW tests are ok and it should be something software related.
    What could be causing this issues? Could be logic bord regarding all HW tests?
    Interesting thing is that when it is doing recovery it can be powered whole night with no problems.
    A also did pram reset but no luck.
    Tnx
    Miha
    Macbook pro, late 2011, 2.2 i7

    Run these steps first. I see you reinstalled. Run the other troubleshooting options, particularly in the second article.
    If you see a blue screen at startup - Support - Apple
    Mac OS X: Gray screen appears during startup - Support - Apple
    If it persists, run the Apple hardware test. It could be your logicboard ...specifically thinking your discrete GPU since this has been such a big issue for these models.
    Using Apple Hardware Test - Support - Apple
    Message was edited by: nbar Completely misread the OP. I see hardware diagnostics checked out. Can you boot into SAFE MODE without trouble?

  • My Macbook Pro 2011 wont boot properly. only when batter is disconnected. HELP

    hi all.
    i have recently bought a macbook pro, 2011 i5 4GB knowing it wasn't fully working, but i need some help.
    when i try and power it on, nothing happens at all (it did turn on once for about 10 seconds, then shut itself down.) i have since been playing around with it, fault finding, and i have found out that if i have the battery disconnected, and have it connected to the charger it works! (if holding CMD+D.) i have tried running the hardwear test, but when holding down the relivent keys on startup it just continues to load the OS X as normal. i do not have the start up discs either. im not entirely sure where to go from here, id love to know what could possibly be causing this fault. any help would be greatly appreciated. thanks in advance.

    Update - I've got it all powered up, updated etc. it only doesn't start now after a forced shutdown (holding off button) if I press shutdown, restart etc it works fine. Really want this sorted, any help would be greatly appreciated. I'm ripping my hair out! Thanks

  • My macbook pro retinal wont boot up

    hi
    i wanted to install windows 8 to my macbook using boot camp.
    after partition and  burn the ios image to my usb drive. just before installing my windows 8. i click on cancel during installation of windows deal to in sufficient time as i have to go to work.
    after i clicked on cancel button. mac should reboot. but now it is showing me a grey screen and after sometimes it says "insert a boot media and hit any keyto boot up."
    so i insert my windows 8 usb drive again and hit any key. the keyboard is not responding and windows is not rebooting.
    any solution to this? i do not  wan to visit apple service center as that  is too troublesome.
    i searched online, they said press and hold on "option key" allow me to boot bak to mac.
    i will try tat when i am bak home.
    any alternative solution?
    will my data lose? i does not have a lion installation disk

    anyone noes?

  • Macbook Pro 2012 wont boot

    While i was using my Macbook all of a sudden it shutdown when i connected a usb to it. It was/is charged to 98/100%. The charger is shockproof and after the shutdown the light at the end of the charger is very faint. Any advice? I wanna avoid opening it but apple is not an option in my country.

    Unplug all other devices and do a #1 SMC Reset
    >>Instructions to reset SMC
    ..Step by Step to fix your Mac

  • Macbook pro retina wont boot

    A week old laptop refuses to boot have tried everything availiable online still no luck!
    Are apple skiming on quality?

    Many thanks, will try and get it replaced if lucky as get back to London on the 13th of January as presently in Kenya. Was happy with my original bought last year which has worked flwlessly so picked another for my daughter, however having it die in less than ten days is a pain as gave it to her as a Christmas present.
    What is the procedure when you book a genius appointment?
    Are they supposed to get it working while you wait?
    If they cant manage this do they replace the same machine?
    Any advice is highly appreciated.
    Thanks in advance

  • MacBook Pro: Tiger wont boot past grey apple screen w/ spinning gear, HELP!

    Hey everybody,
    I have a 1.83 Ghz MBP with 512 mb of RAM (lame I know). The other day someone was using my computer to burn a CD on iTunes when all of my programs began failing. On instinct I rebooted my computer to solve the problem. Alas, now I cant boot past the grey apple screen, and the gear is spinning away. Saddest part of the story is that I had time set aside to back up my computer the day after this happened . Anyway what is the best thing to do from here? I haven't made any moves to fix it yet really, so what is the best thing that I can do to try and get my files back?
    Thank you,
    Sam A.

    Hi, I posted to you in yoour other thread.
    I very much doubt Disk Utility or fsck will fix an +Invalid Node Structure+ error. That's a pretty serious error and DU is just not robust enough of a utility to repair it.
    If Disk Utility can't fix it, you'll need a more robust utility for the repair. I would recommend DiskWarrior. It is the best at directory repairs. It rebuilds then actually replaces your old directory. I feel every Mac owner should have a copy. Make sure you get the disk so you can boot up on it to run repairs. You can also install it on another drive and run it from there to repair this one. DW works faster that way.
    I use DW once a month to try and catch errors in my system from getting too far out of hand.
    If you have a good backup, hopefully a clone of your system before you had issues, an Erase and Install will also rid you of this issue. But, beware! You will lose everything on the drive with this procedure. Let us know if you need help with that!
    Cheers! DALE
    p.s. If the +Invalid Node Structure+ is real bad, there's a risk even the mighty DiskWarrior will not be able to help. Normally it will come thru; it's only in the severe cases it won't be able to do it. If you don't have a backup, and need the data bad, it's worth the try!

  • My macbook pro currently wont boot, when i turn it on it leads me to internet recovery and after that to the utilities pannel, when i tried to reinstall ox lion it didnt show any disk what do i do?

    someone help me plz thanks.

    The internal drive has failed.
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • HT1948 USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?

    USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?

    OS X installers have always been fairly specific, hardware-wise. I haven't read anything reflecting that situation with the Recovery HD, so it may be that the Recovery HD created for the MacBook Pro does not have the necessary drivers for the Mac Pro. Obviously, nothing definitive here, but a possibility.

  • Macbook PRo will not boot, MagSafe adaptor light does not work !

    Okay... so i have this issue with my MBP where it will not power up.
    The light on the magsafe does not show up at all when connected to the MBP. I have tried another magsafe but failed. I have not tried another battery so im not sure if that is wheret the fault lies.
    Ive tried the SMC reset holding the power button down for long, but still no result. However, i left the MBP disconnected from the magsafe and went out for the whole day. Came back, connected the magsafe and thought id try again. I held the power button for 10 seconds and the MBP started booting. It wasnt the normal boot im not sure if it was performing some sort of safe boot, but it was doing something, the screen turned transparent white, restarted and i could finally log in. The battery was very low so i left it on charge with magsafe.
    One thing i have noticed is that sometimes i wont get the light showing on the magsafe but it may still be charging at that point.
    This morning i wake up and its the same issue all over again. It must have stopped charging or something as i left the MBP on with magsafe connected. Now it will not turn on no matter what i do.
    If i tilt the magsafe connector at an angle i can see a dim green light but then id have to hold it in that place to see that light.
    Please advise on what i should do next. Excuse the long story !

    Hi s.cheslik,
    It seems your MacBook Pro will not boot properly and it displaying an error message. Based on the information you have provided, it appears your MacBook Pro needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
    Apple - Support - Service Answer Center
    Thank you for contributing to Apple Support Communities.
    Take care,
    Bobby_D

  • Macbook pro will not boot into Mac OSX

    When i got my MacBook Pro it would boot into Mac OSX fine. Now it wont even give me the option and will only let me boot into Windows which i have running through bootcamp. I have tried reinstalling MacOSX but my OSX installion DVD will not get recognised and i cannot boot off it either. I have tried using 2 other discs still with the same issue. The confusing thing is that the CD/DVD drive works fine and the MacOSx discs work fine in other macs as i have tried it in my brothers machine.
    Any help appreciated.
    Thanks

    I don't think that the laptop even has Mac installed anymore becuase in an attempt to reinstall Mac the partition was formatted. And I can't boot of the disc becuase it just ejects by itself after a few seconds in the drive.

  • My Mid 2010 MacBook Pro will not boot

    My Mid 2010 MacBook Pro will not boot regularly, in safe mode, in recovery mode or from original OS DVD. Is this the logic board?
    I've tried resetting the SMC and pram numerous times and even tried switching out hdd's to try and do a clean install on a new hdd.
    If I attempt to boot regularly or from recovery drive the grey apple logo appears for a period before the screen goes black and the power LED operates as though in 'sleep' mode. I'm unable to wake it from this state and the same applies to booting in safe mode.
    When attempting to boot from the OS DVD that was originally packed with the computer it just freezes on the language select option, this occurs with the other hdd's I have attempted to use.
    Any other suggestions to get it working? I fear the logic board has gone and that the repair won't be worth the money.
    Thank you in advance.

    Hi JRC8.8,
    It sounds like you have been on the right track in trying to troubleshoot this issue. You may want to see if your MacBook Pro will boot directly to the Apple Hardware Test, as outlined in the following article:
    Apple Support: Using Apple Hardware Test
    http://support.apple.com/kb/ht1509
    Regards,
    - Brenden

  • My macbook pro retina wont recognize my external hard drive

    my macbook pro retina wont recognize my external hard drive.
    i opned the hard drive in the past on my computer and used it alot.
    one time when i took it out i forgot to eject it, and since then when ever i conect it it would never show up on my computer or ever recognize the device.
    please help me!

    For starters try a PRAM reset.
    DALE

Maybe you are looking for

  • Smartband and iPhone :(

    Dear all, I had to gave up my Xperia to iPhone (company replacement) but I really do like smartband as it is. Is there a way to pair and use it with iOS? is there any app supporting features/downloading activities? Is sony planning to introduce iOS a

  • Sent Items not in Sent Items box

    Sometimes when I send mail, the mail doesn't appear in the sent items box. So when I check a few days later for details of a mail, it's not there. However, sometimes when I launch mail, the sent items from the last few days all appear in the box at o

  • Can't power on Zen Nano Plus

    I have a Zen Nano Plus gb. The unit powered off so I replaced the battery as it was weak. Now it won't power up. I tested the batteries and tried different batteries. No help. The display blinks on and off at /4 second intervals. When I connect it to

  • Adobe Photoshop Basics Outline

    The lessons have been written for Photoshop versions 5.0, 5.5, 6.0 including educational and academically-priced versions. When information in a lesson does not apply to all of these versions, notes and/or separate pages will be provided for each ver

  • Switching from Mac to Windows

    I started using my ipod on my sister's mac. I did not realize it would be a problem to later use my pc to transfer songs to my ipod. When I try to do so, I get a message threatening to restore... and I was told if I plug my ipod into a mac it will de