Macbook Pro 2.6ghz i7 2013 system freeze when using Premiere/AME CC 2014

I have a Macbook Pro i7 2.6ghz form late 2013 and I have been experiencing some serious problems with my system freezing while using Premiere Pro and whilst rendering from AME.
I am running the latest version of CC (8.1) on OSX 10.9.5.
GFX card: NVIDIA GeForce GT 750M 2048 MB
RAM: 16 GB 1600 MHz DDR3
I have CUDA enabled, I need the performance boost so rendering previews of the CPU is not much of a option for me.
I have experienced this problem since I started running Premiere on my laptop (3 months ago). If I am doing any GPU hungry processes within Premiere or AME the system will freeze, when it freezes nothing will respond and the screen stays frozen, I have to do a manual shut down.
I went as far as replacing the whole laptop with Apple as they put it down to a faulty GFX card, the new one has the same problem which leads me to think that the problem is with how Premiere and AME work with the new Macbook Pro's.
These crashes happen up to three times a day if I'm doing a full day of editing and I have to make sure I don't push the system to hard to avoid it, the crashes don't tend to happen when I am editing 5D footage but they are quite frequent when editing 4k GH4 footage. I am working off multiple hard drives with valuable data which are put at risk when the system crashes. I normally work on a 6 core Mac Pro but next week I'll be pushing my laptop pretty hard with a full week of editing and I'd love to avoid these crashes.
If more info and specs are needed to identify the problem, I'll be happy to provide them.
Cheers, Moja.
ps.
My system just crashed twice today, once while writing this message, I had a project open in Premiere but I wasn't even editing, its currently 30 degrees in Melbourne, one of the hottest days of the year yet, which leads me to believe that the heat is contributing to the GFX card or CPU overloading.

mojareeves1 wrote:
I forgot to add that I have also updated to the latest nvidia card driver.
My music seems to keep playing when the crash occurs which suggests the hard drive and other components are still running fine, its just the GFX card that is crashing.
The GFX card may be a red herring if it still crashes in software mode and with the internal card.  The fact that you have music playing, however, may be a clue.  Programs that can access your audio hardware (like Soundflower) at the same time as Pr have been known to conflict and cause crashes.  Turn off any background audio processes.  Check your system audio settings, as well as Pr's audio and audio hardware settings. If you can, change the source of Pr's Desktop Audio in Preferences>Audio Hardware.  Try changing the ASIO settings.
The next (and most painful) step would be to work your way meticulously through this document:
Troubleshoot system errors, freezes | Mac OS 10.x | Adobe software
The "Re-create Adobe application preferences" step often helps a lot.
Cheers,
Jeff

Similar Messages

  • Macbook pro retina 13" late 2013 gets warm when charging !

    My relatively new MacBook Pro Retina 13" late 2013 gets really warm when charging only and the power block gets kind of hot too !
    shout I be worried or that's a normal thing ?

    Timmacy wrote:
    It wasn't that hot before I updated to the mac osx marvicks.
    Has to do with software compatiability and the OS.
    I would check with sketchbook pro / corel painter 12  for a update. Sometimes version upgrades lag behind before a more compatible release.

  • MacBook Pro Retina 2013 15" freezes when using safari

    I have a 2013 MacBook Pro Retina 15" 2.7ghz, 16gb Ram with 512 gb SSD.  Since the recent EFI update and the OSX 10.8.3 update, when I have been using Safari, my mac has become very sluggish and I get the spinning beachball whihch doesn't clear.  I have only had this MacBook for 17 days.  has anyone else had this problem?

    hope there will be a fix soon…
    Yours is not a common problem, and no fix for it will be forthcoming automatically anytime soon.
    The symptoms you describe could indicate a failing Hard drive, and you should set all else aside and make certain your Backups are completely up-to-date.
    "Any drive can fail at any time."
    In cases like this, a visit to the Genius Bar is really the best solution. Your appointment at the Genius Bar for an evaluation is FREE, in warranty or out.
    For problems with a physical component, or slowness problems, they have the tools and the expertise to quickly make things right. Their diagnostics also can give you the warm fuzzy feeling that the Hardware seems to be operating correctly.

  • Systems freezes when using usb harddrive

    Hi...
    I'm using snow leopard on my Intel MacBook Pro. I've upgraded my system from leopard and then got the OS updates given by apple. One day my system began to freeze without reason. Every window got unresponsive and entire system had to be powered off using force. Doing experiments, I noticed that it happens when I connect an external harddrive using the usb port. I think it began to happen after a snow leopard update....

    I only have one mac, so I can't test in other computer. Connecting the harddrive to a winxp machine can't prove that it is not snow leopard. Besides that, I've used the same harddrive with leopard, that's why this behavior amazes me; I hadn't problems in leopard....

  • Screen flickering and system freezes when using Nouveau driver.

    I'm testing the Nouveau driver on my computer, I really want to keep this driver installed because it makes XFCE to use less resources than the Nvidia proprietary driver. But when I start some apps like firefox or make changes to the desktop, the system stop responding and then the screen breaks.
    I can't use the computer in that state so I force a shutdown.
    I don't know how to see what is going wrong, because the proprietary driver don't give me these problems, I don't get any errors at dmesg log and Xorg log don't have any helpful information.
    dmesg output:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.8.3-2-ARCH (tobias@testing) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Sun Mar 17 13:38:16 CET 2013
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000057feffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000057ff0000-0x0000000057ff2fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x0000000057ff3000-0x0000000057ffffff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x0000000058000000-0x000000005fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] SMBIOS 2.3 present.
    [ 0.000000] DMI: Acer Aspire T180/EM61SM/EM61PM , BIOS R01-B4 06/15/2007
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] e820: last_pfn = 0x57ff0 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-C7FFF write-protect
    [ 0.000000] C8000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
    [ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000f3c90-0x000f3c9f] mapped at [c00f3c90]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff]
    [ 0.000000] [mem 0x00000000-0x003fffff] page 4k
    [ 0.000000] [mem 0x00400000-0x373fffff] page 2M
    [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
    [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x01bfa000-0x01bfffff]
    [ 0.000000] RAMDISK: [mem 0x37a46000-0x37d1afff]
    [ 0.000000] Allocated new RAMDISK: [mem 0x37529000-0x377fd69f]
    [ 0.000000] Move RAMDISK from [mem 0x37a46000-0x37d1a69f] to [mem 0x37529000-0x377fd69f]
    [ 0.000000] ACPI: RSDP 000f8370 00014 (v00 ACRSYS)
    [ 0.000000] ACPI: RSDT 57ff3040 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: FACP 57ff30c0 00074 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: DSDT 57ff3180 0631A (v01 ACRSYS AWRDACPI 00001000 MSFT 0100000E)
    [ 0.000000] ACPI: FACS 57ff0000 00040
    [ 0.000000] ACPI: SSDT 57ff95c0 001C4 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
    [ 0.000000] ACPI: HPET 57ff9800 00038 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000098)
    [ 0.000000] ACPI: SLIC 57ff9880 00176 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000001)
    [ 0.000000] ACPI: MCFG 57ff9a40 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: APIC 57ff9500 0007C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 519MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] Normal [mem 0x01000000-0x377fdfff]
    [ 0.000000] HighMem [mem 0x377fe000-0x57feffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0x57feffff]
    [ 0.000000] On node 0 totalpages: 360319
    [ 0.000000] free_area_init_node: node 0, pgdat c15ab3c0, node_mem_map f6a28200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 1040 pages used for memmap
    [ 0.000000] HighMem zone: 132066 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] Detected use of extended apic ids on hypertransport bus
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] ACPI: IRQ14 used by override.
    [ 0.000000] ACPI: IRQ15 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
    [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] e820: [mem 0x60000000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6a05000 s32640 r0 d20608 u53248
    [ 0.000000] pcpu-alloc: s32640 r0 d20608 u53248 alloc=13*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 357503
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bb82c8c9-614f-4ce3-85f2-3597507c391d ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 2883328 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:00057ff0)
    [ 0.000000] Memory: 1415956k/1441728k available (4184k kernel code, 25320k reserved, 1679k data, 560k init, 532424k highmem)
    [ 0.000000] virtual kernel memory layout:
    fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc15ba000 - 0xc1646000 ( 560 kB)
    .data : 0xc141613e - 0xc15b9d80 (1679 kB)
    .text : 0xc1000000 - 0xc141613e (4184 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
    [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
    [ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
    [ 0.000000] spurious 8259A interrupt: IRQ7.
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1908.551 MHz processor
    [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
    [ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3818.14 BogoMIPS (lpj=6361836)
    [ 0.003343] pid_max: default: 32768 minimum: 301
    [ 0.003404] Security Framework initialized
    [ 0.003415] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003432] Mount-cache hash table entries: 512
    [ 0.006819] Initializing cgroup subsys cpuacct
    [ 0.006822] Initializing cgroup subsys memory
    [ 0.006834] Initializing cgroup subsys devices
    [ 0.006837] Initializing cgroup subsys freezer
    [ 0.006840] Initializing cgroup subsys net_cls
    [ 0.006842] Initializing cgroup subsys blkio
    [ 0.006879] CPU: Physical Processor ID: 0
    [ 0.006882] CPU: Processor Core ID: 0
    [ 0.006885] mce: CPU supports 5 MCE banks
    [ 0.006896] LVT offset 0 assigned for vector 0xf9
    [ 0.006902] process: using AMD E400 aware idle routine
    [ 0.006911] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
    Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
    tlb_flushall_shift: 4
    [ 0.007021] Freeing SMP alternatives: 16k freed
    [ 0.007977] ACPI: Core revision 20121018
    [ 0.015366] ftrace: allocating 18273 entries in 36 pages
    [ 0.023490] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.024036] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.059250] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (fam: 0f, model: 6b, stepping: 01)
    [ 0.059999] Performance Events: AMD PMU driver.
    [ 0.059999] ... version: 0
    [ 0.059999] ... bit width: 48
    [ 0.059999] ... generic registers: 4
    [ 0.059999] ... value mask: 0000ffffffffffff
    [ 0.059999] ... max period: 00007fffffffffff
    [ 0.059999] ... fixed-purpose events: 0
    [ 0.059999] ... event mask: 000000000000000f
    [ 0.078439] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.083409] CPU 1 irqstacks, hard=f60ba000 soft=f60bc000
    [ 0.083412] smpboot: Booting Node 0, Processors #1 OK
    [ 0.006666] Initializing CPU#1
    [ 0.176732] Brought up 2 CPUs
    [ 0.176736] smpboot: Total of 2 processors activated (7637.24 BogoMIPS)
    [ 0.177423] devtmpfs: initialized
    [ 0.177423] PM: Registering ACPI NVS region [mem 0x57ff0000-0x57ff2fff] (12288 bytes)
    [ 0.178162] RTC time: 21:06:38, date: 03/21/13
    [ 0.178225] NET: Registered protocol family 16
    [ 0.178397] node 0 link 0: io port [8000, ffff]
    [ 0.178401] TOM: 0000000060000000 aka 1536M
    [ 0.178404] node 0 link 0: mmio [a0000, bffff]
    [ 0.178408] node 0 link 0: mmio [60000000, efffffff]
    [ 0.178411] node 0 link 0: mmio [f4000000, fe02ffff]
    [ 0.178414] node 0 link 0: mmio [f0000000, f03fffff]
    [ 0.178418] bus: [bus 00-04] on node 0 link 0
    [ 0.178421] bus: 00 [io 0x0000-0xffff]
    [ 0.178423] bus: 00 [mem 0x000a0000-0x000bffff]
    [ 0.178425] bus: 00 [mem 0x60000000-0xf3ffffff]
    [ 0.178428] bus: 00 [mem 0xf4000000-0xffffffff]
    [ 0.178495] ACPI: bus type pci registered
    [ 0.178575] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.178579] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.178581] PCI: Using MMCONFIG for extended config space
    [ 0.178583] PCI: Using configuration type 1 for base access
    [ 0.178677] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.178679] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.178681] mtrr: corrected configuration.
    [ 0.180670] bio: create slab <bio-0> at 0
    [ 0.180670] ACPI: Added _OSI(Module Device)
    [ 0.180670] ACPI: Added _OSI(Processor Device)
    [ 0.180670] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.180670] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.181260] ACPI: EC: Look up EC in DSDT
    [ 0.186070] ACPI: Interpreter enabled
    [ 0.186077] ACPI: (supports S0 S3 S4 S5)
    [ 0.186098] ACPI: Using IOAPIC for interrupt routing
    [ 0.193127] ACPI: No dock devices found.
    [ 0.193134] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.193752] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04])
    [ 0.193756] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.193890] pci_root PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.193894] pci_root PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.195031] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] (ignored)
    [ 0.195034] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] (ignored)
    [ 0.195037] pci_root PNP0A08:00: host bridge window [io 0x8000-0xffff] (ignored)
    [ 0.195040] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] (ignored)
    [ 0.195044] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.195047] pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xefffffff] (ignored)
    [ 0.195050] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored)
    [ 0.195053] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
    [ 0.195057] pci_root PNP0A08:00: host bridge window [io 0x4700-0x470b] (ignored)
    [ 0.195060] pci_root PNP0A08:00: host bridge window [io 0x1c00-0x1c80] (ignored)
    [ 0.195063] pci_root PNP0A08:00: host bridge window [mem 0xfec80000-0xfecbffff] (ignored)
    [ 0.195066] PCI: root bus 00: hardware-probed resources
    [ 0.195117] PCI host bridge to bus 0000:00
    [ 0.195121] pci_bus 0000:00: root bus resource [bus 00-04]
    [ 0.195124] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.195127] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.195130] pci_bus 0000:00: root bus resource [mem 0x60000000-0xf3ffffff]
    [ 0.195134] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xffffffff]
    [ 0.195161] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
    [ 0.195341] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
    [ 0.195384] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
    [ 0.195397] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f]
    [ 0.195414] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
    [ 0.195421] pci 0000:00:01.1: reg 24: [io 0xf400-0xf43f]
    [ 0.195452] pci 0000:00:01.1: PME# supported from D3hot D3cold
    [ 0.195469] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
    [ 0.195516] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
    [ 0.195527] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
    [ 0.195564] pci 0000:00:02.0: supports D1 D2
    [ 0.195567] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.195583] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
    [ 0.195595] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
    [ 0.195639] pci 0000:00:02.1: supports D1 D2
    [ 0.195642] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.195665] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
    [ 0.195711] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
    [ 0.195723] pci 0000:00:05.0: reg 10: [mem 0xfe028000-0xfe02bfff]
    [ 0.195768] pci 0000:00:05.0: PME# supported from D3hot D3cold
    [ 0.195791] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
    [ 0.195814] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
    [ 0.195850] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
    [ 0.195860] pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7]
    [ 0.195866] pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3]
    [ 0.195872] pci 0000:00:08.0: reg 18: [io 0x0970-0x0977]
    [ 0.195877] pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73]
    [ 0.195883] pci 0000:00:08.0: reg 20: [io 0xdc00-0xdc0f]
    [ 0.195889] pci 0000:00:08.0: reg 24: [mem 0xfe02d000-0xfe02dfff]
    [ 0.195922] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
    [ 0.195932] pci 0000:00:08.1: reg 10: [io 0x09e0-0x09e7]
    [ 0.195938] pci 0000:00:08.1: reg 14: [io 0x0be0-0x0be3]
    [ 0.195944] pci 0000:00:08.1: reg 18: [io 0x0960-0x0967]
    [ 0.195949] pci 0000:00:08.1: reg 1c: [io 0x0b60-0x0b63]
    [ 0.195955] pci 0000:00:08.1: reg 20: [io 0xc800-0xc80f]
    [ 0.195961] pci 0000:00:08.1: reg 24: [mem 0xfe02c000-0xfe02cfff]
    [ 0.196000] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
    [ 0.196032] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.196051] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
    [ 0.196081] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.196098] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
    [ 0.196128] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.196146] pci 0000:00:0d.0: [10de:03d0] type 00 class 0x030000
    [ 0.196154] pci 0000:00:0d.0: reg 10: [mem 0xfb000000-0xfbffffff]
    [ 0.196162] pci 0000:00:0d.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.196169] pci 0000:00:0d.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
    [ 0.196177] pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.196209] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
    [ 0.196233] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
    [ 0.196253] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
    [ 0.196273] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
    [ 0.196335] pci 0000:01:09.0: [104c:8024] type 00 class 0x0c0010
    [ 0.196350] pci 0000:01:09.0: reg 10: [mem 0xfdfff000-0xfdfff7ff]
    [ 0.196359] pci 0000:01:09.0: reg 14: [mem 0xfdff8000-0xfdffbfff]
    [ 0.196412] pci 0000:01:09.0: supports D1 D2
    [ 0.196415] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot
    [ 0.196444] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
    [ 0.196448] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
    [ 0.196452] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff]
    [ 0.196456] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff pref]
    [ 0.196459] pci 0000:00:04.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    [ 0.196462] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.196465] pci 0000:00:04.0: bridge window [mem 0x60000000-0xf3ffffff] (subtractive decode)
    [ 0.196469] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xffffffff] (subtractive decode)
    [ 0.196493] pci 0000:00:09.0: PCI bridge to [bus 02]
    [ 0.196498] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
    [ 0.196501] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.196506] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
    [ 0.196548] pci 0000:03:00.0: [11ab:4364] type 00 class 0x020000
    [ 0.196565] pci 0000:03:00.0: reg 10: [mem 0xfdcfc000-0xfdcfffff 64bit]
    [ 0.196575] pci 0000:03:00.0: reg 18: [io 0x9c00-0x9cff]
    [ 0.196604] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.196648] pci 0000:03:00.0: supports D1 D2
    [ 0.196651] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.203353] pci 0000:00:0b.0: PCI bridge to [bus 03]
    [ 0.203357] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
    [ 0.203361] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
    [ 0.203365] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
    [ 0.203390] pci 0000:00:0c.0: PCI bridge to [bus 04]
    [ 0.203394] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
    [ 0.203398] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
    [ 0.203402] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
    [ 0.203413] pci_bus 0000:00: on NUMA node 0
    [ 0.203424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    [ 0.203569] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.242482] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242536] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242587] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242639] ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15)
    [ 0.242689] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242741] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
    [ 0.242791] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242842] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242894] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15)
    [ 0.242944] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.242996] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
    [ 0.243045] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.243098] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
    [ 0.243148] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.243204] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
    [ 0.243265] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
    [ 0.243315] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    [ 0.243375] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
    [ 0.243432] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
    [ 0.243524] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
    [ 0.243606] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
    [ 0.243688] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
    [ 0.243770] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
    [ 0.243851] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
    [ 0.243933] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
    [ 0.244014] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
    [ 0.244095] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
    [ 0.244176] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
    [ 0.244258] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
    [ 0.244340] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
    [ 0.244422] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
    [ 0.244504] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
    [ 0.244586] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
    [ 0.244669] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
    [ 0.244751] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
    [ 0.244833] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
    [ 0.244921] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
    [ 0.245004] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
    [ 0.245086] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.245086] vgaarb: loaded
    [ 0.245086] vgaarb: bridge control possible 0000:00:0d.0
    [ 0.245086] PCI: Using ACPI for IRQ routing
    [ 0.246696] PCI: pci_cache_line_size set to 64 bytes
    [ 0.246745] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
    [ 0.246748] e820: reserve RAM buffer [mem 0x57ff0000-0x57ffffff]
    [ 0.246902] NetLabel: Initializing
    [ 0.246904] NetLabel: domain hash size = 128
    [ 0.246906] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.246923] NetLabel: unlabeled traffic allowed by default
    [ 0.246950] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.246956] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
    [ 0.246961] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
    [ 0.256702] Switching to clocksource hpet
    [ 0.264319] pnp: PnP ACPI init
    [ 0.264346] ACPI: bus type pnp registered
    [ 0.264605] system 00:00: [io 0x1000-0x107f] has been reserved
    [ 0.264609] system 00:00: [io 0x1080-0x10ff] has been reserved
    [ 0.264613] system 00:00: [io 0x1400-0x147f] has been reserved
    [ 0.264616] system 00:00: [io 0x1480-0x14ff] has been reserved
    [ 0.264620] system 00:00: [io 0x1800-0x187f] has been reserved
    [ 0.264623] system 00:00: [io 0x1880-0x18ff] has been reserved
    [ 0.264628] system 00:00: [mem 0xfefe0000-0xfefe01ff] has been reserved
    [ 0.264631] system 00:00: [mem 0xfefe1000-0xfefe10ff] has been reserved
    [ 0.264635] system 00:00: [mem 0x58000000-0x5fffffff] has been reserved
    [ 0.264641] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.265431] system 00:01: [io 0x04d0-0x04d1] has been reserved
    [ 0.265434] system 00:01: [io 0x0800-0x087f] has been reserved
    [ 0.265438] system 00:01: [io 0x0290-0x0297] has been reserved
    [ 0.265442] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.265458] pnp 00:02: [dma 4]
    [ 0.265495] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.265606] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.265670] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.265714] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.265772] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.266190] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.266522] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.266948] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
    [ 0.267129] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
    [ 0.267201] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.267285] system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.267290] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.267506] system 00:0d: [mem 0x000d0000-0x000d3fff] has been reserved
    [ 0.267510] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
    [ 0.267514] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
    [ 0.267517] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
    [ 0.267521] system 00:0d: [mem 0xfeff0000-0xfeff00ff] has been reserved
    [ 0.267525] system 00:0d: [mem 0x57ff0000-0x57ffffff] could not be reserved
    [ 0.267528] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
    [ 0.267532] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.267535] system 00:0d: [mem 0x00100000-0x57feffff] could not be reserved
    [ 0.267539] system 00:0d: [mem 0x58000000-0x5fffffff] has been reserved
    [ 0.267543] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.267546] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
    [ 0.267550] system 00:0d: [mem 0xfefff000-0xfeffffff] has been reserved
    [ 0.267554] system 00:0d: [mem 0xfff80000-0xfff80fff] has been reserved
    [ 0.267557] system 00:0d: [mem 0xfff90000-0xfffbffff] has been reserved
    [ 0.267561] system 00:0d: [mem 0xfffed000-0xfffeffff] has been reserved
    [ 0.267565] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.267589] pnp: PnP ACPI: found 14 devices
    [ 0.267590] ACPI: ACPI bus type pnp unregistered
    [ 0.305593] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6001ffff pref]
    [ 0.305599] pci 0000:00:04.0: PCI bridge to [bus 01]
    [ 0.305603] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
    [ 0.305608] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff]
    [ 0.305612] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff pref]
    [ 0.305617] pci 0000:00:09.0: PCI bridge to [bus 02]
    [ 0.305621] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
    [ 0.305625] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.305629] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
    [ 0.305635] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb1ffff pref]
    [ 0.305638] pci 0000:00:0b.0: PCI bridge to [bus 03]
    [ 0.305641] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
    [ 0.305645] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
    [ 0.305649] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
    [ 0.305654] pci 0000:00:0c.0: PCI bridge to [bus 04]
    [ 0.305657] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
    [ 0.305661] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
    [ 0.305665] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
    [ 0.305677] pci 0000:00:04.0: setting latency timer to 64
    [ 0.305686] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    [ 0.305689] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
    [ 0.305692] pci_bus 0000:00: resource 6 [mem 0x60000000-0xf3ffffff]
    [ 0.305696] pci_bus 0000:00: resource 7 [mem 0xf4000000-0xffffffff]
    [ 0.305699] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
    [ 0.305702] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
    [ 0.305706] pci_bus 0000:01: resource 2 [mem 0xfd800000-0xfd8fffff pref]
    [ 0.305709] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
    [ 0.305712] pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff]
    [ 0.305715] pci_bus 0000:01: resource 6 [mem 0x60000000-0xf3ffffff]
    [ 0.305718] pci_bus 0000:01: resource 7 [mem 0xf4000000-0xffffffff]
    [ 0.305722] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
    [ 0.305725] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
    [ 0.305729] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
    [ 0.305732] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff]
    [ 0.305735] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
    [ 0.305738] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
    [ 0.305742] pci_bus 0000:04: resource 0 [io 0x8000-0x8fff]
    [ 0.305745] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
    [ 0.305748] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
    [ 0.305804] NET: Registered protocol family 2
    [ 0.305997] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.306061] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.306122] TCP: Hash tables configured (established 8192 bind 8192)
    [ 0.306184] TCP: reno registered
    [ 0.306188] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.306204] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.306279] NET: Registered protocol family 1
    [ 0.306537] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
    [ 0.370181] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
    [ 0.370249] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370299] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370357] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370411] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370469] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370531] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370598] pci 0000:00:00.0: Found enabled HT MSI Mapping
    [ 0.370606] pci 0000:00:0d.0: Boot video device
    [ 0.370621] PCI: CLS 64 bytes, default 64
    [ 0.370687] Unpacking initramfs...
    [ 0.455995] Freeing initrd memory: 2900k freed
    [ 0.459106] apm: BIOS not found.
    [ 0.459448] audit: initializing netlink socket (disabled)
    [ 0.459468] type=2000 audit(1363899998.456:1): initialized
    [ 0.474029] bounce pool size: 64 pages
    [ 0.474052] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.476263] VFS: Disk quotas dquot_6.5.2
    [ 0.476327] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.476593] msgmni has been set to 1731
    [ 0.476998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.477042] io scheduler noop registered
    [ 0.477044] io scheduler deadline registered
    [ 0.477053] io scheduler cfq registered (default)
    [ 0.477195] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
    [ 0.477269] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
    [ 0.477329] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
    [ 0.477469] vesafb: mode is 640x480x32, linelength=2560, pages=0
    [ 0.477471] vesafb: scrolling: redraw
    [ 0.477474] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.477558] vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 1216k, total 1216k
    [ 0.484141] Console: switching to colour frame buffer device 80x30
    [ 0.490611] fb0: VESA VGA frame buffer device
    [ 0.490704] GHES: HEST is not enabled!
    [ 0.490719] isapnp: Scanning for PnP cards...
    [ 0.802592] isapnp: No Plug & Play device found
    [ 0.802671] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.823231] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.843779] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    [ 0.844469] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.844915] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.844951] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.845087] mousedev: PS/2 mouse device common for all mice
    [ 0.845182] rtc_cmos 00:04: RTC can wake from S4
    [ 0.845358] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [ 0.845400] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
    [ 0.845435] cpuidle: using governor ladder
    [ 0.845437] cpuidle: using governor menu
    [ 0.845439] EFI Variables Facility v0.08 2004-May-17
    [ 0.845489] drop_monitor: Initializing network drop monitor service
    [ 0.845593] TCP: cubic registered
    [ 0.845736] NET: Registered protocol family 10
    [ 0.845940] NET: Registered protocol family 17
    [ 0.845958] Key type dns_resolver registered
    [ 0.846129] Using IPI No-Shortcut mode
    [ 0.846264] PM: Hibernation image not present or could not be loaded.
    [ 0.846279] registered taskstats version 1
    [ 0.846851] Magic number: 5:851:146
    [ 0.846912] acpi device:17: hash matches
    [ 0.846972] rtc_cmos 00:04: setting system clock to 2013-03-21 21:06:39 UTC (1363899999)
    [ 0.847246] Freeing unused kernel memory: 560k freed
    [ 0.847645] Write protecting the kernel text: 4188k
    [ 0.847679] Write protecting the kernel read-only data: 1284k
    [ 0.858078] systemd-udevd[45]: starting version 198
    [ 0.864682] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.904637] ACPI: bus type usb registered
    [ 0.904681] usbcore: registered new interface driver usbfs
    [ 0.904697] usbcore: registered new interface driver hub
    [ 0.904815] usbcore: registered new device driver usb
    [ 0.906826] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.908458] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.908536] ohci_hcd 0000:00:02.0: setting latency timer to 64
    [ 0.908541] ohci_hcd 0000:00:02.0: OHCI Host Controller
    [ 0.908550] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
    [ 0.908594] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
    [ 0.910252] ehci-pci: EHCI PCI platform driver
    [ 0.910290] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
    [ 0.910329] firewire_ohci 0000:01:09.0: setting latency timer to 64
    [ 0.912040] SCSI subsystem initialized
    [ 0.915768] ACPI: bus type scsi registered
    [ 0.918637] libata version 3.00 loaded.
    [ 0.962268] hub 1-0:1.0: USB hub found
    [ 0.962279] hub 1-0:1.0: 10 ports detected
    [ 0.962535] ehci-pci 0000:00:02.1: setting latency timer to 64
    [ 0.962539] ehci-pci 0000:00:02.1: EHCI Host Controller
    [ 0.962547] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 2
    [ 0.962559] ehci-pci 0000:00:02.1: debug port 1
    [ 0.962589] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
    [ 0.962617] ehci-pci 0000:00:02.1: irq 22, io mem 0xfe02e000
    [ 0.970035] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
    [ 0.970261] hub 2-0:1.0: USB hub found
    [ 0.970268] hub 2-0:1.0: 10 ports detected
    [ 0.970681] pata_amd 0000:00:06.0: version 0.4.1
    [ 0.970736] pata_amd 0000:00:06.0: setting latency timer to 64
    [ 0.971618] scsi0 : pata_amd
    [ 0.972200] scsi1 : pata_amd
    [ 0.972449] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
    [ 0.972452] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
    [ 0.972517] sata_nv 0000:00:08.0: version 3.5
    [ 0.972721] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
    [ 0.972802] sata_nv 0000:00:08.0: setting latency timer to 64
    [ 0.973161] scsi2 : sata_nv
    [ 0.973470] scsi3 : sata_nv
    [ 0.973598] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21
    [ 0.973602] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21
    [ 0.973822] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
    [ 0.973886] sata_nv 0000:00:08.1: setting latency timer to 64
    [ 0.974209] scsi4 : sata_nv
    [ 0.974369] scsi5 : sata_nv
    [ 0.974488] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 20
    [ 0.974491] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 20
    [ 1.130346] ata1.00: ATAPI: HL-DT-ST DVDRAM_GSA-H40N, RA00, max UDMA/66
    [ 1.130357] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13)
    [ 1.143604] ata1.00: configured for UDMA/66
    [ 1.149515] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM_GSA-H40N RA00 PQ: 0 ANSI: 5
    [ 1.149876] ata2: port disabled--ignoring
    [ 1.297028] ata3: SATA link down (SStatus 0 SControl 300)
    [ 1.297032] ata5: SATA link down (SStatus 0 SControl 300)
    [ 1.633688] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.643352] firewire_ohci 0000:01:09.0: failed to read phy reg
    [ 1.643576] firewire_ohci: probe of 0000:01:09.0 failed with error -16
    [ 1.730033] usb 1-4: new low-speed USB device number 2 using ohci_hcd
    [ 1.936808] usbcore: registered new interface driver usbhid
    [ 1.936814] usbhid: USB HID core driver
    [ 2.100049] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.107021] ata6.00: ATA-7: Hitachi HDS721616PLA380, P22OAB3A, max UDMA/133
    [ 2.107025] ata6.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.120325] ata6.00: configured for UDMA/133
    [ 2.120524] scsi 5:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
    [ 2.125055] sd 5:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB)
    [ 2.125119] sd 5:0:0:0: [sda] Write Protect is off
    [ 2.125123] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.125149] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.131113] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.131120] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.131457] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [ 2.146217] sda: sda1 sda2 sda3
    [ 2.146831] sd 5:0:0:0: [sda] Attached SCSI disk
    [ 2.206694] usb 1-8: new full-speed USB device number 3 using ohci_hcd
    [ 2.407819] Initializing USB Mass Storage driver...
    [ 2.408184] scsi6 : usb-storage 1-8:1.0
    [ 2.408335] usbcore: registered new interface driver usb-storage
    [ 2.408337] USB Mass Storage support registered.
    [ 2.542664] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.014632] systemd[1]: Smack is not enabled in the kernel, not loading access rules.
    [ 3.097131] systemd[1]: systemd 198 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 3.097800] systemd[1]: Set hostname to <acer-aspire>.
    [ 3.352860] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 3.352959] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 3.352983] systemd[1]: Expecting device sys-subsystem-net-devices-enp3s0.device...
    [ 3.353005] systemd[1]: Starting Remote File Systems.
    [ 3.353024] systemd[1]: Reached target Remote File Systems.
    [ 3.353041] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 3.353091] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 3.353108] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 3.353156] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 3.353173] systemd[1]: Starting Delayed Shutdown Socket.
    [ 3.353206] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 3.353222] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 3.353253] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 3.353274] systemd[1]: Starting Journal Socket.
    [ 3.353366] systemd[1]: Listening on Journal Socket.
    [ 3.354821] systemd[1]: Starting Apply Kernel Variables...
    [ 3.357143] systemd[1]: Mounting Huge Pages File System...
    [ 3.363518] systemd[1]: Mounting POSIX Message Queue File System...
    [ 3.370154] systemd[1]: Mounting Debug File System...
    [ 3.385832] systemd[1]: Starting Journal Service...
    [ 3.393610] systemd[1]: Started Journal Service.
    [ 3.393800] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 3.393975] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 3.407359] systemd[1]: Started Set Up Additional Binary Formats.
    [ 3.407389] systemd[1]: Starting Encrypted Volumes.
    [ 3.407409] systemd[1]: Reached target Encrypted Volumes.
    [ 3.407431] systemd[1]: Starting Setup Virtual Console...
    [ 3.410492] systemd[1]: Starting udev Kernel Socket.
    [ 3.410553] systemd[1]: Listening on udev Kernel Socket.
    [ 3.410641] systemd[1]: Starting udev Control Socket.
    [ 3.410689] systemd[1]: Listening on udev Control Socket.
    [ 3.410760] systemd[1]: Starting udev Coldplug all Devices...
    [ 3.417037] systemd[1]: Starting udev Kernel Device Manager...
    [ 3.418761] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
    [ 3.436758] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
    [ 3.441505] systemd[1]: Started Load Kernel Modules.
    [ 3.441546] systemd[1]: Mounted FUSE Control File System.
    [ 3.441570] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 3.441652] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 3.441693] systemd[1]: Mounting Configuration File System...
    [ 3.465751] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
    [ 3.476732] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    [ 3.505747] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
    [ 3.516728] sd 6:0:0:1: [sdc] Attached SCSI removable disk
    [ 3.549724] sd 6:0:0:2: [sdd] Attached SCSI removable disk
    [ 3.553823] systemd[1]: Expecting device dev-disk-by\x2duuid-bb5a3cc3\x2d55fd\x2d4830\x2d8177\x2ddd32df9bd303.device...
    [ 3.553856] systemd[1]: Mounting Temporary Directory...
    [ 3.571730] sd 6:0:0:3: [sde] Attached SCSI removable disk
    [ 3.744908] systemd-udevd[126]: starting version 198
    [ 3.777101] systemd[1]: Started File System Check on Root Device.
    [ 3.777142] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 3.790819] systemd[1]: Started udev Kernel Device Manager.
    [ 3.800185] systemd[1]: Started Apply Kernel Variables.
    [ 4.118718] EXT4-fs (sda2): re-mounted. Opts: data=ordered
    [ 4.205364] systemd-journald[122]: Received SIGUSR1
    [ 5.423026] thermal LNXTHERM:00: registered as thermal_zone0
    [ 5.423033] ACPI: Thermal Zone [THRM] (40 C)
    [ 5.463049] input: PC Speaker as /devices/platform/pcspkr/input/input1
    [ 5.484558] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    [ 5.484570] ACPI: Power Button [PWRB]
    [ 5.484693] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 5.484697] ACPI: Power Button [PWRF]
    [ 5.491085] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
    [ 5.542488] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
    [ 5.542524] i2c i2c-1: nForce2 SMBus adapter at 0xf400
    [ 5.547898] Linux agpgart interface v0.103
    [ 5.558914] ACPI: Fan [FAN] (on)
    [ 5.559089] [drm] Initialized drm 1.1.0 20060810
    [ 5.565468] microcode: AMD CPU family 0xf not supported
    [ 5.567533] microcode: AMD CPU family 0xf not supported
    [ 5.642735] wmi: Mapper loaded
    [ 5.645076] kvm: Nested Virtualization enabled
    [ 5.649689] powernow-k8: fid 0xb (1900 MHz), vid 0xc
    [ 5.649696] powernow-k8: fid 0xa (1800 MHz), vid 0xd
    [ 5.649699] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
    [ 5.649987] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (2 cpu cores) (version 2.20.00)
    [ 5.685561] checking generic (e0000000 130000) vs hw (e0000000 10000000)
    [ 5.685568] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
    [ 5.685594] Console: switching to colour dummy device 80x25
    [ 5.685773] nouveau 0000:00:0d.0: setting latency timer to 64
    [ 5.686326] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23
    [ 5.686707] nouveau [ DEVICE][0000:00:0d.0] BOOT0 : 0x04c000a2
    [ 5.686715] nouveau [ DEVICE][0000:00:0d.0] Chipset: C61 (NV4C)
    [ 5.686722] nouveau [ DEVICE][0000:00:0d.0] Family : NV40
    [ 5.687642] nouveau [ VBIOS][0000:00:0d.0] checking PRAMIN for image...
    [ 5.733281] nouveau [ VBIOS][0000:00:0d.0] ... appears to be valid
    [ 5.733287] nouveau [ VBIOS][0000:00:0d.0] using image from PRAMIN
    [ 5.733560] nouveau [ VBIOS][0000:00:0d.0] BIT signature found
    [ 5.733565] nouveau [ VBIOS][0000:00:0d.0] version 05.61.32.25.04
    [ 5.733746] nouveau [ PFB][0000:00:0d.0] RAM type: unknown
    [ 5.733749] nouveau [ PFB][0000:00:0d.0] RAM size: 128 MiB
    [ 5.733752] nouveau [ PFB][0000:00:0d.0] ZCOMP: 0 tags
    [ 5.761373] [TTM] Zone kernel: Available graphics memory: 443504 kiB
    [ 5.761379] [TTM] Zone highmem: Available graphics memory: 709716 kiB
    [ 5.761381] [TTM] Initializing pool allocator
    [ 5.761831] nouveau [ DRM] VRAM: 125 MiB
    [ 5.761838] nouveau [ DRM] GART: 512 MiB
    [ 5.761844] nouveau [ DRM] BIT BIOS found
    [ 5.761848] nouveau [ DRM] Bios version 05.61.32.25
    [ 5.761852] nouveau [ DRM] TMDS table version 1.1
    [ 5.761855] nouveau [ DRM] DCB version 3.0
    [ 5.761859] nouveau [ DRM] DCB outp 00: 01000310 00000023
    [ 5.761863] nouveau [ DRM] DCB outp 01: 00110204 98830003
    [ 5.761865] nouveau [ DRM] DCB conn 00: 0000
    [ 5.761869] nouveau [ DRM] DCB conn 01: 1131
    [ 5.761872] nouveau [ DRM] DCB conn 02: 0110
    [ 5.761875] nouveau [ DRM] DCB conn 03: 0111
    [ 5.761877] nouveau [ DRM] DCB conn 04: 0113
    [ 5.762420] nouveau W[ DRM] DCB type 4 not known
    [ 5.762425] nouveau W[ DRM] Unknown-1 has no encoders, removing
    [ 5.763281] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 5.763283] [drm] No driver support for vblank timestamp query.
    [ 5.763931] nouveau [ DRM] 1 available performance level(s)
    [ 5.763937] nouveau [ DRM] 0: core 425MHz shader 425MHz fanspeed 100%
    [ 5.763939] nouveau [ DRM] c:
    [ 5.765435] nouveau [ DRM] MM: using M2MF for buffer copies
    [ 5.811870] sky2: driver version 1.30
    [ 5.812122] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
    [ 5.812188] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 2
    [ 5.812268] sky2 0000:03:00.0: irq 43 for MSI/MSI-X
    [ 5.812560] sky2 0000:03:00.0 eth0: addr 00:19:21:28:95:2d
    [ 5.814804] composite sync not supported
    [ 5.815267] nouveau [ DRM] allocated 1440x900 fb: 0x9000, bo f63fa000
    [ 5.815425] fbcon: nouveaufb (fb0) is primary device
    [ 5.829143] IT8726 SuperIO detected.
    [ 5.829405] parport_pc 00:09: reported by Plug and Play ACPI
    [ 5.829453] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    [ 5.856121] ppdev: user-space parallel port driver
    [ 5.877128] Console: switching to colour frame buffer device 180x56
    [ 5.878923] nouveau 0000:00:0d.0: fb0: nouveaufb frame buffer device
    [ 5.878929] nouveau 0000:00:0d.0: registered panic notifier
    [ 5.878952] [drm] Initialized nouveau 1.1.0 20120801 for 0000:00:0d.0 on minor 0
    [ 5.879707] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
    [ 5.879730] hda_intel: Disabling MSI
    [ 5.879786] snd_hda_intel 0000:00:05.0: setting latency timer to 64
    [ 6.023710] systemd-udevd[151]: renamed network interface eth0 to enp3s0
    [ 6.497697] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input4
    [ 6.498447] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.0-4/input0
    [ 6.533068] Adding 997756k swap on /dev/sda3. Priority:-1 extents:1 across:997756k
    [ 6.633135] sky2 0000:03:00.0 enp3s0: enabling interface
    [ 6.633209] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    [ 6.846889] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5
    [ 7.603865] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
    [ 7.604089] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
    [ 7.604265] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
    [ 7.604442] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
    [ 7.604616] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
    [ 7.604791] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:05.0/sound/card0/input11
    [ 7.604969] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:05.0/sound/card0/input12
    [ 7.605141] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:05.0/sound/card0/input13
    [ 8.208529] composite sync not supported
    [ 8.244451] composite sync not supported
    [ 8.450333] sky2 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex, flow control both
    [ 8.450367] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
    [ 20.811802] composite sync not supported
    [ 23.142014] EXT4-fs (sda2): re-mounted. Opts: data=ordered,commit=0
    [ 84.047784] usb 1-4: USB disconnect, device number 2
    [ 85.606696] usb 1-4: new low-speed USB device number 4 using ohci_hcd
    [ 85.814008] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input14
    [ 85.814445] hid-generic 0003:093A:2510.0002: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.0-4/input0
    [ 389.250323] composite sync not supported
    Xorg log:
    [ 7.949]
    X.Org X Server 1.14.0
    Release Date: 2013-03-05
    [ 7.949] X Protocol Version 11, Revision 0
    [ 7.949] Build Operating System: Linux 3.8.2-1-ARCH i686
    [ 7.949] Current Operating System: Linux acer-aspire 3.8.3-2-ARCH #1 SMP PREEMPT Sun Mar 17 13:38:16 CET 2013 i686
    [ 7.949] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bb82c8c9-614f-4ce3-85f2-3597507c391d ro quiet
    [ 7.949] Build Date: 09 March 2013 11:46:22AM
    [ 7.949]
    [ 7.949] Current version of pixman: 0.28.2
    [ 7.949] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 7.949] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 7.949] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 21 15:06:46 2013
    [ 7.988] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 8.001] (==) No Layout section. Using the first Screen section.
    [ 8.001] (==) No screen section available. Using defaults.
    [ 8.001] (**) |-->Screen "Default Screen Section" (0)
    [ 8.001] (**) | |-->Monitor "<default monitor>"
    [ 8.011] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 8.011] (==) Automatically adding devices
    [ 8.011] (==) Automatically enabling devices
    [ 8.011] (==) Automatically adding GPU devices
    [ 8.060] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 8.060] Entry deleted from font path.
    [ 8.060] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 8.060] Entry deleted from font path.
    [ 8.060] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 8.060] Entry deleted from font path.
    [ 8.060] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 8.060] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 8.060] Entry deleted from font path.
    [ 8.060] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 8.060] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 8.060] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 8.060] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 8.069] (II) Loader magic: 0x825b620
    [ 8.069] (II) Module ABI versions:
    [ 8.069] X.Org ANSI C Emulation: 0.4
    [ 8.069] X.Org Video Driver: 14.1
    [ 8.069] X.Org XInput driver : 19.1
    [ 8.069] X.Org Server Extension : 7.0
    [ 8.069] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 8.072] (--) PCI:*(0:0:13:0) 10de:03d0:1019:2601 rev 162, Mem @ 0xfb000000/16777216, 0xe0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
    [ 8.073] Initializing built-in extension Generic Event Extension
    [ 8.073] Initializing built-in extension SHAPE
    [ 8.073] Initializing built-in extension MIT-SHM
    [ 8.073] Initializing built-in extension XInputExtension
    [ 8.073] Initializing built-in extension XTEST
    [ 8.073] Initializing built-in extension BIG-REQUESTS
    [ 8.073] Initializing built-in extension SYNC
    [ 8.073] Initializing built-in extension XKEYBOARD
    [ 8.073] Initializing built-in extension XC-MISC
    [ 8.073] Initializing built-in extension SECURITY
    [ 8.073] Initializing built-in extension XINERAMA
    [ 8.073] Initializing built-in extension XFIXES
    [ 8.073] Initializing built-in extension RENDER
    [ 8.073] Initializing built-in extension RANDR
    [ 8.073] Initializing built-in extension COMPOSITE
    [ 8.073] Initializing built-in extension DAMAGE
    [ 8.073] Initializing built-in extension MIT-SCREEN-SAVER
    [ 8.073] Initializing built-in extension DOUBLE-BUFFER
    [ 8.073] Initializing built-in extension RECORD
    [ 8.073] Initializing built-in extension DPMS
    [ 8.073] Initializing built-in extension X-Resource
    [ 8.073] Initializing built-in extension XVideo
    [ 8.073] Initializing built-in extension XVideo-MotionCompensation
    [ 8.073] Initializing built-in extension XFree86-VidModeExtension
    [ 8.073] Initializing built-in extension XFree86-DGA
    [ 8.073] Initializing built-in extension XFree86-DRI
    [ 8.073] Initializing built-in extension DRI2
    [ 8.073] (II) LoadModule: "glx"
    [ 8.099] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 8.133] (II) Module glx: vendor="X.Org Foundation"
    [ 8.133] compiled for 1.14.0, module version = 1.0.0
    [ 8.133] ABI class: X.Org Server Extension, version 7.0
    [ 8.133] (==) AIGLX enabled
    [ 8.134] Loading extension GLX
    [ 8.134] (==) Matched nouveau as autoconfigured driver 0
    [ 8.134] (==) Matched nvidia as autoconfigured driver 1
    [ 8.134] (==) Matched nv as autoconfigured driver 2
    [ 8.134] (==) Matched nouveau as autoconfigured driver 3
    [ 8.134] (==) Matched nvidia as autoconfigured driver 4
    [ 8.134] (==) Matched nv as autoconfigured driver 5
    [ 8.134] (==) Matched vesa as autoconfigured driver 6
    [ 8.134] (==) Matched modesetting as autoconfigured driver 7
    [ 8.134] (==) Matched fbdev as autoconfigured driver 8
    [ 8.134] (==) Assigned the driver to the xf86ConfigLayout
    [ 8.134] (II) LoadModule: "nouveau"
    [ 8.134] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 8.154] (II) Module nouveau: vendor="X.Org Foundation"
    [ 8.154] compiled for 1.14.0, module version = 1.0.6
    [ 8.154] Module class: X.Org Video Driver
    [ 8.154] ABI class: X.Org Video Driver, version 14.1
    [ 8.154] (II) LoadModule: "nvidia"
    [ 8.155] (WW) Warning, couldn't open module nvidia
    [ 8.155] (II) UnloadModule: "nvidia"
    [ 8.155] (II) Unloading nvidia
    [ 8.155] (EE) Failed to load module "nvidia" (module does not exist, 0)
    [ 8.155] (II) LoadModule: "nv"
    [ 8.155] (WW) Warning, couldn't open module nv
    [ 8.155] (II) UnloadModule: "nv"
    [ 8.155] (II) Unloading nv
    [ 8.155] (EE) Failed to load module "nv" (module does not exist, 0)
    [ 8.155] (II) LoadModule: "vesa"
    [ 8.156] (WW) Warning, couldn't open module vesa
    [ 8.156] (II) UnloadModule: "vesa"
    [ 8.156] (II) Unloading vesa
    [ 8.156] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 8.156] (II) LoadModule: "modesetting"
    [ 8.156] (WW) Warning, couldn't open module modesetting
    [ 8.156] (II) UnloadModule: "modesetting"
    [ 8.156] (II) Unloading modesetting
    [ 8.157] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 8.157] (II) LoadModule: "fbdev"
    [ 8.157] (WW) Warning, couldn't open module fbdev
    [ 8.157] (II) UnloadModule: "fbdev"
    [ 8.157] (II) Unloading fbdev
    [ 8.157] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 8.157] (II) NOUVEAU driver
    [ 8.157] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 8.157] RIVA TNT (NV04)
    [ 8.157] RIVA TNT2 (NV05)
    [ 8.157] GeForce 256 (NV10)
    [ 8.157] GeForce 2 (NV11, NV15)
    [ 8.157] GeForce 4MX (NV17, NV18)
    [ 8.157] GeForce 3 (NV20)
    [ 8.158] GeForce 4Ti (NV25, NV28)
    [ 8.158] GeForce FX (NV3x)
    [ 8.158] GeForce 6 (NV4x)
    [ 8.158] GeForce 7 (G7x)
    [ 8.158] GeForce 8 (G8x)
    [ 8.158] GeForce GTX 200 (NVA0)
    [ 8.158] GeForce GTX 400 (NVC0)
    [ 8.158] (++) using VT number 7
    [ 8.175] (II) [drm] nouveau interface version: 1.1.0
    [ 8.175] (II) Loading sub module "dri"
    [ 8.175] (II) LoadModule: "dri"
    [ 8.175] (II) Module "dri" already built-in
    [ 8.175] (II) NOUVEAU(0): Loaded DRI module
    [ 8.175] (--) NOUVEAU(0): Chipset: "NVIDIA NV4c"
    [ 8.175] (II) NOUVEAU(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 8.175] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    [ 8.175] (==) NOUVEAU(0): RGB weight 888
    [ 8.175] (==) NOUVEAU(0): Default visual is TrueColor
    [ 8.175] (==) NOUVEAU(0): Using HW cursor
    [ 8.175] (==) NOUVEAU(0): GLX sync to VBlank disabled.
    [ 8.175] (==) NOUVEAU(0): Page flipping enabled
    [ 8.175] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
    [ 8.208] (II) NOUVEAU(0): Output VGA-1 has no monitor section
    [ 8.244] (II) NOUVEAU(0): EDID for output VGA-1
    [ 8.244] (II) NOUVEAU(0): Manufacturer: ACR Model: ada8 Serial#: 1937803344
    [ 8.244] (II) NOUVEAU(0): Year: 2007 Week: 38
    [ 8.244] (II) NOUVEAU(0): EDID Version: 1.3
    [ 8.244] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 8.244] (II) NOUVEAU(0): Sync: Separate Composite
    [ 8.244] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 37 vert.: 23
    [ 8.245] (II) NOUVEAU(0): Gamma: 2.20
    [ 8.245] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 8.245] (II) NOUVEAU(0): Default color space is primary color space
    [ 8.245] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 8.245] (II) NOUVEAU(0): redX: 0.590 redY: 0.349 greenX: 0.328 greenY: 0.547
    [ 8.245] (II) NOUVEAU(0): blueX: 0.155 blueY: 0.138 whiteX: 0.313 whiteY: 0.329
    [ 8.245] (II) NOUVEAU(0): Supported established timings:
    [ 8.245] (II) NOUVEAU(0): 720x400@70Hz
    [ 8.245] (II) NOUVEAU(0): 640x480@60Hz
    [ 8.245] (II) NOUVEAU(0): 640x480@67Hz
    [ 8.245] (II) NOUVEAU(0): 640x480@72Hz
    [ 8.245] (II) NOUVEAU(0): 640x480@75Hz
    [ 8.245] (II) NOUVEAU(0): 800x600@56Hz
    [ 8.245] (II) NOUVEAU(0): 800x600@60Hz
    [ 8.245] (II) NOUVEAU(0): 800x600@72Hz
    [ 8.245] (II) NOUVEAU(0): 800x600@75Hz
    [ 8.245] (II) NOUVEAU(0): 832x624@75Hz
    [ 8.245] (II) NOUVEAU(0): 1024x768@60Hz
    [ 8.245] (II) NOUVEAU(0): 1024x768@70Hz
    [ 8.245] (II) NOUVEAU(0): 1024x768@75Hz
    [ 8.245] (II) NOUVEAU(0): 1152x864@75Hz
    [ 8.245] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 8.245] (II) NOUVEAU(0): Supported standard timings:
    [ 8.245] (II) NOUVEAU(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    [ 8.245] (II) NOUVEAU(0): #1: hsize: 1280 vsize 800 refresh: 75 vid: 3969
    [ 8.245] (II) NOUVEAU(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 8.245] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 8.245] (II) NOUVEAU(0): Supported detailed timing:
    [ 8.245] (II) NOUVEAU(0): clock: 106.5 MHz Image Size: 367 x 229 mm
    [ 8.245] (II) NOUVEAU(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
    [ 8.245] (II) NOUVEAU(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
    [ 8.245] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 215 MHz
    [ 8.245] (II) NOUVEAU(0): Monitor name: Acer AL1716W
    [ 8.245] (II) NOUVEAU(0): Serial No: LA8040344303
    [ 8.245] (II) NOUVEAU(0): EDID (in hex):
    [ 8.245] (II) NOUVEAU(0): 00ffffffffffff000472a8ad50888073
    [ 8.245] (II) NOUVEAU(0): 261101036c251778ee10d59759548c27
    [ 8.246] (II) NOUVEAU(0): 235054bfee8081c0810f9500950f0101
    [ 8.246] (II) NOUVEAU(0): 0101010101019a29a0d0518422305098
    [ 8.246] (II) NOUVEAU(0): 36006fe510000006000000fd00384c1f
    [ 8.246] (II) NOUVEAU(0): 5315000a202020202020000000fc0041
    [ 8.246] (II) NOUVEAU(0): 63657220414c31373136570a000000ff
    [ 8.246] (II) NOUVEAU(0): 004c41383034303334343330330a00aa
    [ 8.246] (II) NOUVEAU(0): Printing probed modes for output VGA-1
    [ 8.246] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 +hsync +vsync (55.9 kHz eP)
    [ 8.246] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
    [ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 8.246] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752

    I got again a total system freeze today when I wanted to launch firefox using only the openbox menu, without wbar running.
    So I decided to try now the 'nouveau.noaccel=1' kernel command line parameter, and to use again wbar for my frequently used applis.
    In the Xorg log, the differences are:
    without 'nouveau.noaccel=1'
    [ 30.761] (II) UnloadModule: "nv"
    [ 30.761] (II) Unloading nv
    [ 30.761] (--) Depth 24 pixmap format is 32 bpp
    [ 30.762] (II) NOUVEAU(0): Opened GPU channel 0
    [ 30.765] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 30.765] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
    [ 30.765] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
    [ 30.776] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 30.777] (II) EXA(0): Driver registered support for the following operations:
    [ 30.777] (II) Solid
    [ 30.777] (II) Copy
    [ 30.777] (II) Composite (RENDER acceleration)
    [ 30.777] (II) UploadToScreen
    [ 30.777] (II) DownloadFromScreen
    [ 30.777] (==) NOUVEAU(0): Backing store disabled
    [ 30.777] (==) NOUVEAU(0): Silken mouse enabled
    with 'nouveau.noaccel=1'
    [ 1191.621] (II) UnloadModule: "nv"
    [ 1191.621] (II) Unloading nv
    [ 1191.621] (--) Depth 24 pixmap format is 32 bpp
    [ 1191.621] (EE) NOUVEAU(0): Error creating GPU channel: -19
    [ 1191.621] (EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
    [ 1191.621] (==) NOUVEAU(0): Backing store disabled
    [ 1191.621] (==) NOUVEAU(0): Silken mouse enabled
    [ 1191.621] (==) NOUVEAU(0): DPMS enabled
    So now 3D acceleration is disabled.
    I will see now if the system is stable enough for my daily usage and gives satisfactory performances.
    I am almost sure that the mesa nouveau dri driver is the cause of the freezes.
    Last edited by berbae (2013-03-27 10:07:42)

  • Macbook Pro 15 Late 11 extreme fans noise when using external monitor

    Dear Apple, recently I bought Macbook Pro 15 Late 11. I really love it's speed and new OS X Lion, BUT this Macbook really noisy when I use external monitor and keyboard. I work on external monitor all the time. I don't care about how hot my Macbook is when I'm on external monitor. Let it just be hot and quiet.
    P.S. Example. I run Ableton Live and have 6200 RPM working on external monitor (awfully loud!). CPU 90% idle. When I switch off external monitor and use internal one, RPM drops down to 4500 with the same Ableton work session. By the way, I don't need cool graphic card. Apple, let our work days be quiet.

    I did that and it didn't help. It's common problem with an external monitor. Here are some links:
    http://forums.macrumors.com/showthread.php?t=1162550
    http://www.ivy-rose.co.uk/Articles/Macbook-Pro-Cooling-Issues

  • Macbook pro md101 full charge capacity decrease quickly when using Pin

    When i used Macbook pro in Batterry mode, FULL CHARGE CAPACITY decreased continuously. My Cycle count is only 5 , but Full Charge Capacity is 5453 (Design Capacity is 5770). Please help me ! Thanks

    Condition:
         Service Battery
    You need a new battery.

  • MAcbook Pro 10.5.1 intermittently switching off when using battery only

    Very recently, my macbook pro has started switching itself off. It only happen when using the battery and the charge meter (on the battery) still shows at least 50% charge. It would appear that I can not reboot wither until the mains are attached again. I no longer receive the warning message regarding reserve power, and have previously run the lappy down to 5-6% charge before a recharge.
    I have had 10.5.1 installed since its release, and this issue has only just started in the last week, despite daily usage.
    Has anyone else had this or similar issues? It seems unlikely thatt it is hardware and I've cchecked the connections and they appear ok. Please help, its very annoying.
    Thanks in advance,
    Graham

    This sounds exactly like what was happening to me last fall - around Labor Day. This is a battery problem not an OS problem. I called Apple Care and they sent a new battery (after we tried all the PRAM stuff, etc.). The new battery took care of the problem.
    I hope this helps. Good luck.
    Bob Q.

  • [SOLVED] System freezing when using rsync

    Hello,
    I have a new build of Arch with the GDE and overall it is working very well.
    There are some 'glitches', some more disruptive than others.
    When using rsync over a powerline connection (I only mention the powerline connection, as, when using rsync directly via my router I have no issues) between two identical NICs/Servers both running FreeNAS, the PC I have arch installed upon/is running rsync freezes intermittently throughout the process of rsync.
    The freezes are apparent by lost keyboard and mouse reply, and all screens freezing.
    I have attempted to use top and gnome-system-monitor to find out the reason, but, they both list rsync as the top cpu process when the freezes happen, and, no other running process seems to 'move' in the list of processes at the same time.
    This happens when I have any other applications/logins running - be it Firefox, Thunderbird, other consoles, etc.
    I am using Guake as a terminal (Mainly because I cannot get gnome-terminal to work - it is installed and appears, but, selecting the icon leads to nothing appearing) - perhaps this is the cause - I would not know how else to troubleshoot other than attempting to use top and system-monitor.
    Many thanks everyone.
    Last edited by fitzyj (2015-01-26 13:21:09)

    Thank you karol - you have been so helpful.  It is really appreciated and has helped me make great progress today.
    That link for rsync is perfect! (I shall post back with my results)
    Yes - Gnome Desktop Environment, I am a bit embarrassed, I'm not sure why, but, from what I read, I think that I am meant to be
    I guess that I am very used to it, and, I really like being able to press the 'windows' button and type the beginning of a GUI that I want to run, followed quicky by enter, and I am there...
    For me it is all about speed, so, any Window Managers that are quick without a ludicrous amount of guesswork as to how to get going with them would be good.  Do you have suggestions for tiling WMs in relation to terminal emulators therefore?
    I have tried the 'obvious' WMs: LXDE, XFCE, Openbox, KDE and have found Gnome to be the easiest/quickest to use, but, that is only so far - I am SO open to suggestions as I love to try something that, without recommendation, I might have missed, especially when in a forum of 'like minded' people!
    I have not heard of tmux or urxvt for example, so, shall imediately be trying them out - ALL of your kind suggestions today have been a marvelous help, and, will probably become a part of my daily routine - now there is an example of how to influence people heh karol!
    Thank you once again
    Last edited by fitzyj (2015-01-17 17:39:01)

  • System freeze when using catalyst driver and xorg 1.16

    As the title says, my computer freezes up when using the catalyst drivers.  This happens even when I haven't run startx (happens even when I ssh).  Typically I would check my syslog after a crash, right?  However, I don't see a syslog in /var/log.  How would I go about troubleshooting this?
    EDIT:
    Okay I discovered journalctl  .  I ran journalctl --since=today and the point in time at which my computer froze and had to be rebooted was blank.  Here is the relevant part of the log...
    Feb 26 21:56:47 kodi systemd[554]: Starting Default.
    Feb 26 21:56:47 kodi systemd[554]: Reached target Default.
    Feb 26 21:56:47 kodi systemd[554]: Startup finished in 11ms.
    -- Reboot --
    Feb 26 22:04:36 kodi systemd-journal[141]: Runtime journal is using 8.0M (max allowed 84.6M, trying to leave 127.0M free of 838.9M available → current limit 8
    Feb 26 22:04:36 kodi systemd-journal[141]: Permanent journal is using 64.0M (max allowed 2.7G, trying to leave 4.0G free of 22.3G available → current limit 2.
    Feb 26 22:04:36 kodi systemd-journal[141]: Time spent on flushing to /var is 1.152ms for 2 entries.
    My computer froze at about 22:03.  That portion is missing from the log so I have no way of knowing what caused the freeze.
    EDIT2:
    I should also mention that I recently upgraded so I'm running kernel 3.18.6-1-ARCH.  Will the catalyst drivers work with this kernel?  I did not have a problem with the old kernel, which I think was 3.16
    Last edited by necbot (2015-02-27 02:34:49)

    necbot wrote:I should also mention that I recently upgraded so I'm running kernel 3.18.6-1-ARCH.  Will the catalyst drivers work with this kernel?  I did not have a problem with the old kernel, which I think was 3.16
    First of all - I'm AMD APU user but I've not used Catalyst for a long time, then please be carefull with my opinion. When we can read on Release note, the latest Catalyst driver works with:
    - Xorg/Xserver 7.4 and above (up to 1.16)
    - Linux kernel 2.6 or above (up to 3.17)
    - glibc version 2.2 or 2.3
    - POSIX Shared Memory (/dev/shm) support is required for 3D applications
    see: http://support.amd.com/en-us/kb-article … Notes.aspx but on AUR we can read, that this driver is for linux < 3.19 (then kernel 3.18 is supported). This is possible because lano1106_fglrx-13.8_proc.patch but, of course, it's not official, upstream patch. From the other hand, I know that Ubuntu's users has seriously problem with Catalyst on Xorg 1.16.

  • MacBook Pro Usable Resolution is 800 x 600 when using a Projector

    We are having issues with the MacBook Pro8,1 using the Thunderbolt port and VGA adapter.
    We are using the Creston Quick Media System with Epson 6155W. We can only get the message usable resolution is 800x600.  This happens with all our projectors and does not happen with older models of MacBooks.
    If we go straight VGA to the projector, we can go up to 1280x800. 
    Does anyone else have this issue?

    You aren't likely to find many other users of the Crestron system in these forums, and the fact that your setup works exactly as expected when you connect directly to the projector indicates clearly that the Crestron system is the locus of the problem. So I recommend working with the manufacturer and/or supplier of the Crestron equipment to resolve it.

  • I have a MacBook Pro and downloaded new operating system Maverick

    I have a MacBook Pro with the leopard operating system. When the Maverick operating system was offered as a free download, I downloaded it but iphoto and imovie didn't download what should I do?

    Before getting Mavericks, be sure to read:
    https://discussions.apple.com/docs/DOC-6271

  • IMac 10.6.2 freeze when using iSight

    Hello
    i have Problems - after i upgrade to 10.6.0 from 10.5... everything was ok .
    Then i installed 10.6.1 - still not big problems sometimes hang up - only power off helped .
    Since i use 10.6.2 - System freeze when using iSight , ini Chat or Skype after 20 sec.
    I tried to go back to 10.6.1 - freeze after 20min .
    With 10.6.0 so far no freeze .
    I need help .

    TnT Sweden wrote:
    Hello , once again
    i tried these steps with reset , .... did not work .
    Also in another account .
    So i think i will try to make a clean Installation .
    As i am "new" into Mac - what will be the best way .
    I had Leopard from the beginning - now bought Snow Leopard .I have Time Capsule for Backup.
    My questions - with what System CD i should start to make the clean install ?
    10.5 or 10.6 ?
    And How ?
    What Data will be lost - or is all backup with Time Machine like Photos ,......
    Thanks in advance -
    If you follow your plan, you will learn a lot and not be nearly so "new" to Mac. Here are my responses to your latest questions/statements:
    So i think i will try to make a clean Installation .
    In our jargon, a "clean" install means that you will erase your disk and individually reinstall your system and applications, and then restore your data files. This method is very thorough and will give you a pristine system, but it requires considerably more of your time and effort than other methods that may correct your problems.
    Easier alternatives are available for your consideration. Before you undertake a system reinstall, read the rest of this post and then study this document and the links in the document that are applicable to your problem and plans:
      http://support.apple.com/kb/TS1388
    If you decide to reinstall your system, carefully consider your installation options:
      http://support.apple.com/kb/HT1545 (also applies to OS 10.6)
    As i am "new" into Mac - what will be the best way .
    "Best" can mean different things to different people. For example:
    • The method explained in the User Guide (manual) that came with your Mac is the easiest way.
    • The "Erase and Install" option from http://support.apple.com/kb/HT1545 is quicker to reinstall, but requires more work for apps and data after the OS is installed.
    • Archive and Install with the "Preserve user and network settings" option eliminates the need for reinstalling apps and reconfiguring network and other user settings by "preserving" these things during the OS reinstall. Unfortunately, it sometimes also preserves the problem that is causing your difficulty.
    • Secure erase before installing OS assures that NOTHING unwanted remains on your disk to cause problems after the reinstall. One pass of writing Zeros is sufficient for your purpose. Note that secure erase will take hours, depending on the size of your disk. The help article below applies to your 10.5&6 as well as the 10.4 it states,:
      http://docs.info.apple.com/article.html?path=DiskUtility/10.5/en/duh1011.html
    Perhaps easiest of all (as least for Time Machine users) is to use your Mac's Leopard Install DVD and your Time Machine backup to "Restore" your system to a configuration dated BEFORE you did the update that has caused your problems. This method will get you working quickly, but it will not help you use Snow Leopard. If you have not already figured out how to do this "Restore," see:
      http://support.apple.com/kb/HT1553
    The section entitled " Using Disk Utility" will help you use your Time Machine backup to take your entire system back to when Leopard was working. After it works again, either stay with Leopard, or uninstall or update whatever software is causing your Snow Leopard conflict before again updating to Snow Leopard.
    My questions - with what System CD i should start to make the clean install ? 10.5 or 10.6 ?
    Use Leopard Install CD if you want to backup to Leopard.
    Only use Snow Leopard if you want to try a fresh install of SL to see if you can get it working.
    And How ?
    Depending on your needs and whether you bought your Mac and SL update locally, and especially if your time is valuable to you, the best way may be to contact your retailer for an appointment so he can either help you or fix your problem for you. If you can use this as a training exercise, you will find it easier to do than to read and write about, and you can ask questions during the process. If you retailer does not consider proper installation of the SL software you bought from him to be part of his service, and if he offers "One to One", you may find it well worth your time and its cost:
      http://www.apple.com/retail/onetoone/
    If you have plenty of time, or if you merely like doing things for yourself, follow the instructions for the Disk you are using (or the instructions in the links I cite above if you want to try one of those methods.) Remember, you can try an easy/quick way first in case it works without all the manual effort on your part. If that fails to correct your problem, you are only out your time. You can try the next easiest way, and keep trying increasingly complex methods until you find the one that works for you.
    What Data will be lost - or is all backup with Time Machine like Photos ,......
    This answer varies depending on which method you use to restore your system or reinstall your OS:
    • NOTHING IS LOST when you Archive & Install
      (if you "preserve user and network settings" before installing)
    • EVERYTHING IS LOST when you secure erase.
    • Other methods may keep data but lose application or user configuration settings.
    (1) I use SL on two Macs and it work GREAT on both. I WANT to use SL because I like it MUCH better than Leopard.&ensp:You did not ask this, but here is how I would proceed to get SL working:
    ♦ Unless you already have it, I would make another, separate, backup of all important data in addition to the one you already have in Time Machine. One backup is not enough for me. In addition to your music, photos, and other data files, consider items like those listed here:
      http://support.apple.com/kb/HT2980
    ♦ THEN, I would securely erase the startup disk and follow the instructions that came with the SL DVD to install SL. 
    ♦ Immediately after the restart that completes the install, I would use Mac's Disk Utility to repair permissions.
    ♦ Then configure your internet connection, and download and install the Mac OS X v10.6.2 Update (Combo):
      http://support.apple.com/kb/DL959
    ♦ Immediately after the restart that completes the Combo Update, repair permissions again.
    ♦ Once you have reinstalled SL, use  > Software Update... to update any other Apple software as needed. I repair permissions before and after any installer than asks me to enter my Administrator Password.
    ♦ Now you can test your iMac using http://support.apple.com/kb/HT2090 to verify that the problem is resolved. If your problem persists at this point, see your Apple Authorized Service Provider for professional help.
    ♦ You can restore your data files either now or after reinstalling third-party items.
    ♦ Now, you can reinstall necessary third-party software. Install only one item at a time and test thoroughly before adding another so you can tell if one of them is causing a problem.
    (2) If you would rather retreat to Leopard and not bother trying to fix SL on your Mac, the easiest fix will be to restore your Leopard system from Time Machine. You can then restore any data newer than your last working Leopard system from your backups.
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
    LED Cinema Display  G4 PowerBook 1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

  • MacBook Pro retina 13" (late 2013, Haswell) why is the highest resolution rendered in 3360x2100, which the system obviously can't handle?!

    Hey Apple and Apple users,
    I just recently switched from an MacBook Air (mid 2013) to the new Haswell MacBook Pro retina 13" (late 2013 model).
    The main reason to do so was the better screen and the option to run higher scaled resolutions, as advertised.
    I was willing to trade in the Air's low weight, smaller formfactor and the extra batterylife for the better screen.
    When it comes to resolutions:
    1280x800 is just a joke nowadays, why is the MacBook Pro still based on it? 13" and 1440x900 work quite fine...see MacBook Air.
    1440x900 is okay in everyday life situations, but sometimes you just need "more space" as the third scaling option calls it as well in the display-settings.
    1680x1050 on 13" can sometimes be challenging, but it is really fine if you need to work and have a lot UI elements to deal with (Photoshop etc.)
    So 1680x1050 scaled on the 2560x1600 screen would be my daily driver for work. So I expected a scaling factor of "1.5238..." (2560/1680) will be used most of the time.
    Frankly spoken...I am really disappointed by the 13" retina MacBook Pro and the way OS X Mavericks is handling the scaling.
    It obiously works well and responsive with the 1280x800 non-scaling resolution ("best for retina, scaling factor 2: 1280 --> 2560).
    Is still "okay-snappy" at 1440x900 (scaling factor 1.777...: 1440 --> 2560).
    But it totally breaks down at 1680x1050 (scaling factor 1.523...: 1680 --> 2560).
    I use "Mission Control" all the time and it is stuttering and slow...overall a sluggish and unbearable experience.
    The same goes for Desktop-Switching by swiping the screens or resizing and moving windows and files around.
    So I was wondering why...and then I noticed that when taking a screenshot of my entire screen (CMD + 3) the image size of the screenshot was 3360x2100 and not the expected 2560x1600.
    This means Mavericks is not scaling the UI with the appropriate factor (see above). For retina MacBooks it ist simply rendering one pixel of the classic, non-retina Interface in now 4 pixels (2x2) and sending this straight to the screen, which then "scales" it down to the resolution it is able to display.
    Why is this bothering me? – Because the machine has to do a lot more work to render the higher resolution that can't even be displayed, due to the screens limitations.
    2560x1600 = 4096000 pixels = 100%
    3360x2100 = 7056000 pixels = 172%
    This means the MacBook has to render 72% more information than actually can be displayed on the built-in screen and are just lost.
    Of course this makes the overall UI feel sluggish and idly! Especially with the not that performant Intel Iris IGP and no dedicated graphics card.
    All this extra "rendering" just results in a worse battery life due to the extra work that the graphics card and CPU have to do.
    First, Apple...are you serious about this?
    What can we do about this?
    Is there a way to have this properly scaled?
    Thanks in advance to everyone.

    Okay...I thought deeply about this issue.
    Even looking into ways to maybe fixing this on the software side. But it occured to me that this is to deeply embedded into the system that it won't be possbile to come up with a sufficient third-party solution.taht
    The problem is that there is no intermediate step inbetween "standard DPI" graphics and "HiDPI" (image-resources named "[email protected]").
    But there should be one, to minimize the amount of image information that needs to be processed by the device.
    This effects especially the MacBook Pro retina 13", as it has the less powerful Intel Iris IGP, when performing on the highest scaled resolution (equivalent to 1650x1080).
    As well as the MacBook Pro retina 15" without a dedicated, second Graphics Unit,when performing on the highest possible scaled resolution (equivalent to 1920x1200).
    Those devices don't have enough resources to handle the consequential "HiDPI" resolutions of 3360x2100 for the 13" and 3840x2400 for the 15" model.
    (Comment: 3840x2400 = 9,2MP, which is more than the standard 4K resolution of 3840x2160.
    I analyzed the scaling factors as follows:
    Factor "2" to display 1280x800 on the 13" model and 1440x900 on the 15" model in HiDPI.
    Factor "1.777..." would be required to display 1440x900 on the 2560x1600 screen of the 13" model.
    Factor "1.714..." would be required to display 1650x1080 on the 2880x1800 screen of the 15" model.
    Factor "1.523..." would be required to display 1650x1080 on the 2560x1600 screen of the 13" model.
    Factor "1.5" would be required to display 1920x1200 on the 2800x1800 screen of the 15" model.
    As all the models seem to have no problem with rendering the intermediate scaling step (1440x900 for the 13" and 1680x1050 for the 15" model) at HiDPI, hence with the scaling factor 2. There is no real need to provide the UI-elements.
    But in my opinion there is a strong need for a "MidDPI" ([email protected]) intermediate step for all the UI graphic elements that wis based on the scaling factor 1.5.
    This would result in the following:
    13" MacBook Pro retina with 2560x1600 screen:
    1280x 800 @ 2x = 2560x1600 (no surplus, native screen resolution)
    1440x 900 @ 2x = 2880x1800 (the surplus of 1088000px = ~1MP can still be handled and compansated by the weak Iris IGP)
    1680x1050 @ 2x = 3360x2100 (the surplus of 2960000px = ~3MP is too much for the weak Iris IGP)
    NEW 1680x1050 @ 1.5x = 2520x1575 (with a small border of left=20px, bottom=13, right=20, top=12 pixels, which means ~2,2mm and ~1.3mm around the 1.5x scaled image!).
    15" MacBook Pro retina with 2880x1800 screen:
    1440x900 @ 2x = 2880x1800 (no surplus, native screen resolution)
    1680x1050 @ 2x = 3360x2100 (the surplus of 1872000px = ~2MP can still be handled by the Iris Pro IGP)
    1920x1200 @ 2x = 3840x2400 (the surplus of 4032000px = ~4MP can't be handled sufficiently by the Iris Pro IGP)
    NEW 1920x1200 @ 1.5x = 2800x1800 (nu surplus, native screen resolution, no border needed!)
    The big advantage is that all the graphics have already been remodeled for the HiDPI mode.
    So scaling those "factor 2x" images down to "factor 1.5x" should be comparably easy!
    Example:
    Left: Traditional "standard DPI" icon of "all my files".
    Right: "@2x.png" for the "HiDPI" modes.
    Middle: "@1.5x.png" suggestions for the "MidDPI" mode; easily scaled down from the lovely HiDPI graphics.
    With this simple introduction of the "MidDPI" modes a significant amount of processing power can be saved.
    This not only improves battery life when driving those higher scaled resolutions, but also lets the user access those resources for what really matters: processing power for the primary job that the Mac needs to get done.
    Thanks in advance.

  • Why my macbook pro 15" retina late 2013 shows weird display spec in the system report.

    Hi, my  macbook pro 15" retina late 2013 displays screen resolution as 3360*2100 in the system report. As we all know that the 15" model of late 2013 macbook pro has the maxmium resolution as 2880*1800. So is there anyone has a clue?

    Odd. Set the current resolution to "Best for Retina."
    Start up in Safe Mode
    Then reboot normally. Same issue?

Maybe you are looking for

  • The airplay function is not working on the ipad

    hei i have installedan apple tv2. on my tv which is connected to the same network as my ipad. I can stream pictures from the ipad to the big screen but nevertheless I can not get the airplay function to work on my ipad and thus I can not use the mirr

  • Aperture 3 and MobileMe are now solved?

    I am still on with Aperture 2.1.4 and have just had trouble with creating a new MobileMe gallery again, as Aperture remarks after it has uploaded the previews and made the gallery - til there is all fine - it could not communicate with MobileMe. This

  • BAPI to create a credit memo request

    Is there a standard BAPI that can create a credit memo request? If not, then can we copy a standard BAPI to a Z-version and amend that? Sample code appreciated. Thanks, John

  • Exported images with large blank areas

    I exported RAW images from Aperture as JPEGs. In many of them, large blank areas appeared instead of the images (ie: the top half of the photo is blank, except for a few squares scattered throughout). Did anyone have a problem like this? How can I so

  • AuthSchemaNotImplException

    I am trying to run my SOAP transaction through our proxy and I get the above error. The scheme not implemented is "Negotiate". I have tried setting the realm, username etc but that does not work either. The proxy server in question is Microsoft Proxy