Macbook Pro - 2 Hard Drives - Dual Boot OS OSX + Windows

Hello guys, I've been facing an issue here
I bought an SSD 2 years ago and changed the original MBP HD. I did a fresh install of OSX while still having my optical drive. Everything is fine with the OSX installation.
Recently I bought an enclosure and installed the original MBP HD drive into the optical drive slot. Now i have two HD's on my MBP (Early 2011 - Unibody Model)
The configuration for the Hard Drives is as follows:
SSD Drive - disk 0 - OS X Running fine
HD Drive - disk 1 - clean formatted to accommodate Windows 7 installation
I started the BootCamp Utility formated the second hard drive to install windows from bootable USB. Everything works fine until the point where the Windows installation actually expands the files. I always get the same error, that windows cannot be installed on that drive and any changes will be reverted back to original settings.
Several hours after researching the whole thing this is what I've got:
The error that I am getting is for the configuration of the drives, a fix to this problem is to take out my SSD, install the old HD in its original position, install windows normally, put my SSD back in its position and put the old HD in the optical drive and thus I will have the Dual Boot of two OS in two different HD's. That's really really awful as I have to take appart again the whole thing and swap between the drives till the process is finished. This is because The EFI boot + Windows to be installed require the disk that windows to be installed to be on main slot - disk 0.
My question here is, is there any fix to the BootCamp assistant to let me install windows on the hard drive that it is located on the disk 1 position?
Moreover is there any way to install windows through the environment of OSX with the use of a VM, but, the windows to be a bootable OS rather than a VM bootable image? (on disk 1 - optical drive SATA port). - What I mean by that is, while running OS X normally on disk 0 run a VM software that will mimic the environment of a bootloader so that I can install windows on disk 1, but after I shut down my computer, windows should be accessible on disk 1 as a normal installed OS.
Sorry for the long post and thank you very much for your time, any suggestions would be really helpful.

You can install Parallels or Fusion, either will work. When you setup either Parallels or fusion you can tell it to use your already installed Boot Camp installation of Windows as its target guest operating system.
You would then just boot into OSx, start your VM (Parallels or Fusion), then you'll have access to both OSx and Windows without having to reboot.
I have this setup and two monitors. I have my Windows running on my external monitor and OSx running on my Macbook Pro monitor at the same time.
Beware that you will need to re-register Windows to get a second key. This is free and easily done either online or by calling the Microsoft registration number. The reason for needing a second key is that Windows, although only installed once in your Boot Camp partition sees the virtual hardware created by your virtual machine and thinks it has been reinstalled on a new computer.

Similar Messages

Hey, can i clone my Macbook Pro internal hard drive and then paste it all onto a formated external hard drive, then make the Mac use the external as the primary hard drive?

hey, can i clone my Macbook Pro internal hard drive and then paste it all onto a formated external hard drive, then make the Mac use the external as the primary hard drive? please help for i only have around 618mb left out of 189GB!!!!!!!!!!!!!!!!

If what doesn't work?
If cloning your internal drive to the external drive is not successful, I expect CCC will tell you so. Assuming that doesn't happen, you will have a bootable replica of the internal drive on the external drive once CCC has finished.
You can then do any of several things:
1. Replace your internal drive with a much larger one (320GB or 500GB, or even larger), and clone the external drive's contents onto the new drive so you'll have all your data in one place. Note that if you do this, you'll also need to buy an external drive that's large enough to back the new internal drive up on.
2. Boot from the external drive as a temporary measure while you clear at least 30-40GB of data off the internal drive, allowing you to keep using it and saving small amounts of data to it. The external drive will then contain the only copies of the files you've deleted from the internal drive, so you'll need a seond external drive large enough to back both the other drives up on.
If you can't comfortably clear a minimum of 30GB off the internal drive, you really need a larger internal drive right now, and you shouldn't bother fooling around with the inadequate one you have — you'll just quickly overfill it again.
3. Replace the optical drive in your MBP with a large conventional hard drive, giving you two hard drives inside the machine. You will then need one or more external drives large enough to back up both of the internal drives.
If you sense a theme here — back up, back up, back up — you are correct. It's flat-out foolhardy to own or use a computer without maintaining complete, up-to-date backups of everything at all times.

I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!

I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!

This is true of course, but doesn't cover the situation where some files are in the iTunes Media folder and others are on an external drive. In my case I keep my music in the Media folder and all my films on an external drive (there are too many to have on the internal drive). In iTunes 11, and before, it was easy to add those external files by holding down the alt/opt key while dragging to the sidebar. In iTunes 12 this is no longer possible. There are several workarounds: use TuneSpan to move the file after it's been added; delete the file from the Media folder and empty the trash then use iTunes Get Info which will report the file is missing and allow you to locate it; constantly switch the Add to iTunes toggle on and off as required. All of these require a lot more work than just holding down the alt/opt key while adding.
It constantly gets harder.

On my macbook pro the hard drive icon is not on my desktop and I don't know how to find the hard drive or get the icon back on my desktop

on my macbook pro the hard drive icon is not on my desktop and I don't know how to find the hard drive or get the icon back on my desktop

Click on the Desktop. From the Finder menu select Preferences. Check the boxes for what you want on your Desktop. If they are already checked, then try unchecking and rechecking.

HT201250 I recently replaced my 2009 Macbook Pro's hard drive. I had the Apple store upgrade the OS to Mountain Lion while it was being repaired. I want to restore all of my old files and data, if I restore from Time Machine, will it revert to the old O

I recently had to replace my 2009 Macbook Pro's hard drive. I had the apple store upgrade the OS to Mountain Lion while it was in being repaired. I want to restore all of my old data and files. If I perform a restore from Time Machine, with a date prior to having the hard drive replaced, will it revert back to the old OS?

No, it won't revert to the prior OS X but you you may have third party apps installed that were compatible with Lion that may not be compatible with Mountain Lion.
App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS
After you restore from TM, check HD > Incompatible Software

My MacBook Pro's hard drive is about full, can I move a lot of the data to my 3 TB Time Capsule?

I have a late 2011 MacBook Pro 17 Inch with 750 GB of space on its hard drive. About a month and half ago I bought a 3 TB Time Capsule and I know that Time Capsule, together with Time Machine, basically takes periodic snapshots of your hard drive and will rearrange/clean/delete files on your hard drive. What I want to know is that since I'm about to run out of space on the internal hard drive can I move a good chunk of the data into the Time Capsule and free up that data on internal hard drive. Videos take up about 75% of my MacBook Pro's hard drive so video's are my biggest problem. If I can't do this with the Time Capsule I guess that's a con of the Time Capsule/Time Machine.
Thank you to anyone that answers!

You should be able to do that by partitioning but then how would that data be backed up? If the Time Capsule drive fails, then all of that data is lost. I would suggest you consider an additional external HDD for redundancy unless the video files are of no importance.
Ciao.

I had problems with my MacBook pro's hard drive.

I had problems with my MacBook pro's hard drive. And I have this question how can I end up getting a replacement for it like get a new one.

The recycle program makes it easier for you to trade in your old Mac and buy a new one. Apple has a partner that will take the old one and give you a gift card for the value -- if your old Mac is in pretty good condition and doen't have problems (passes the diagnostics).

My Macbook Pro (2009) Hard Drive is gone?

Hi guys, I was playing a game on my mac on the steam network when my computer stopped responding. I was able to use my mouse but was effectively unable to use it because it wouldn't click anything. Anyway the beach ball appeared and after about a minute my mac turned itself off, going straight to black. I turned it back on and it went through the login screen but my computer stayed on the gray loading screen (with the apple logo with the spinning wheel below) for over half an hour without responding.
I turned off the mac and tried to do a slow boot, to no effect.
I then went to the recovery centre, and chose the option of restarting the computer using my Macintosh Hard Drive. The computer restarted but then at the grey login screen a no entry sign appeared.
I then turned off my computer, restarting it to get to the recovery centre, where there was no longer any trace of my hard drive.
Now when I turn on my computer I log in my password but the no entry sign is still there. There is still no trace of my hard drive. the recovery centre still works so my computer still works.
SUMMARY
-macbook turned itself off
-i turned it back on but would load past the loading screen with apple icon
-tried to slow boot and to restart my system with my macintosh HD from the recovery centre
-now no trace of my hard drive is visible and I cannot login, and I am greeted with a 'no entry' sign
Has anybody encountered this before? Have I deleted my Hard Drive by accident?
Any help at all would be really really appreciated.

Either your drive is badly corrupted or has died. Try:
Install or Reinstall Mavericks, Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
      the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Urgent - I think I just lost everything on my MacBook Pro. Hard drive won't mount and booting up shows "no" symbol

My MacBook Pro (13" mid 2010, Yosemite) doesn't feel like booting up. It gives me the no symbol after the progress bar is about 1/4 of the way through.
Additionally, it won't mount in the Recovery HD. It shows up as disk0s6 and clicking Mount does nothing. Can't seem to mount it in the Terminal either.
The disk partition is encrypted, so unfortunately I can't pull the hard drive out of my MBP and pull the stuff off it with my PC.
I tried First Aid - "no problems found" (such LIES!)
I tried PRAM - didn't work
I tried Verbose Mode - went fine for the first minute, then hung for a while before returning to the "No" screen and in the bottom right corner "Still waiting for root drive".
I tried SMC - didn't work
Most recently I did install rEFInd - which is a boot manager. I was afraid it screwed up the EFI partition -seemingly not, as it will boot to Recovery and external drives.
The data still seems to be there, but the OS is having trouble accessing it.
Do you know what would be causing this? I really need that data back :/

It appears I can unlock the partition, using diskutil via the Terminal (diskutil coreStorage unlockVolume <UUID> -passphrase <passphrase>).
However the volume doesn't have a UUID. It lists the partition type as "FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF" (which is a UUID) but using that doesn't work.
Additionally when I use diskutil coreStorage list, it comes up with nothing. I'm at a loss here, the partition doesn't even know it's own UUID or that it's encrypted. It seems quite damaged to me but I don't have the slightest idea why, as I CAN boot to it and enter the password but it will stop at the "no" symbol part of the way along.

My mid-2009 MacBook Pro's hard drive is near death. I want to install a new SSD and work from scratch. Please help.

Recently, my mid-2009 MacBook Pro has been crashing when I close the screen ("it's having a problem recognizing when the screen is closed/open and deciding what to do, error overload etc."). It wasn't an SMC issue so I took it to an Apple Store, ran some tests, and decided my hard-drive is failing.
Not wanting to spend an insane amount of money on some "official apple hard-drive," I want to install a new 256GB SSD instead. Hoping to squeeze as much life out of this computer as possible (in January I upgraded from 4 GB RAM to 8 GB), I would like to try and start from scratch, i.e. back-up important folders, music, photos etc. and only take that to the new hard-drive. If someone could explain all the steps I need to take to safely complete this task (or point me in the direction of a guide) I'd appreciate it.
Potentially Important info:
     Model:                mid-2009 13'' MacBook Pro
     Processor:          2.53 GHz Intel Core 2 Duo
     Memory:             4 GB 1067 MHz DDR3
     Software:            OS X 10.8.4
Some additional questions I have...
     Should I be concerned with making a fully bootable back-up (not sure what that is called) as well? If so, what program should I use to create it?
     How much more life should I try and push out of this computer? I'm an engineering student and really only use it for web-surfing, music, and
          word-processing. The batter was replaced in March, the RAM was upgraded to 8 GB in January. When the battery was swapped, the trackpad went           nuts so that's new too. Only other issues are a slightly loose audio jack and the left side of the screen being slightly wobbly (hinge is worn I'm told).

cwgonzalez1192
     Should I be concerned with making a fully bootable back-up (not sure what that is called) as well? If so, what program should I use to create it?
     How much more life should I try and push out of this computer? I'm an engineering student and really only use it for web-surfing, music, and
          word-processing.
Well there is no "official Apple HD / SSD" in any regard, no worries there.
If as you say youre only using same for surfing and word processing, why the need for a SSD? You would not notice any speed diff. in use on either of those,....in boot times yes, but in word or surfing, not.
You can push it likely a few more years, for mere surfing and word processing,...many many years.   Up TO the point that any major fixes become unrealistic relative to getting a new(ER) machine.
Concerned with a boot clone? yes and no. Its an ideal immediate recovery, since you cannot boot from Time Machine, ....in case of HD crash, recovery takes seconds from boot, or 20 mins or so from removing old and installing a clone. All the prosumers and pros have at least one updated clone of their prime machines.
You can do a "fresh install" if you choose, however if your current drive is FINE, why not merely clone it and save yourself some headache?...., but that is your prerogative of course.    Ideally 2 drives, one to backup your data (you need that regardless of installing a new drive for sake of a backup/archive,...ideally 2 actually, not merely one).
You could clone internal to NEW SSD/HD , ...then offload unnecessary files to an external to free up space and clutter and run off the clone, and this would only take a couple hours......the clone itself takes approx. 40+ mins.
CLONE Apps :
Superduper does not clone the recovery partition, but that is NOT necessary if you keep the original HD as a “backup clone”. Most don’t bother with the recovery partition in a clone, however that is your prerogative.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
(Free superduper APP above)
CCC App
http://www.bombich.com/

How to reformat a Macbook pro 2011 hard drive?

Hello,
How do you reformat a MacBook Pro (OS X 10.7.3) 2011s Hard drive? I already backed up all the files I wanted to save. But since I have the new Macbook pro 2011 (only a few months since I got it) it didn't come with an installation disc, but instead already came with all the applications. I'm wondering how to reformat the hard drive so it wipes out everything and I can start fresh and what would happen to all the applications?

Well Lion has a Lion Recovery Partition on the drive you can access by holding command r and booting, there you can erase the Lion OS X partition completely (all files and programs) and reinstall Lion or simply reinstall Lion if there is a issue with it (no programs or files are touched in this second procedure)
Lion is downloaded from apple's servers, you need AppleID and a fast reliable internet connection with no bandwidth caps limiting you.
https://support.apple.com/kb/HT4718
If you want to replace the drive, there is software called Carbon Copy Cloner than can clone both the Lion OS X Partition and the Lion Recovery Partition to a external drive intact (excpet what's in the Trash, no Filevualt, no bootcamp, use free Winclone for that)
Hold the option key and you can boot from the external drive and format and clone everything to the new internal drive. TimeMachine of 10.7.2 and later can be booted from it's Lion Recovery Parttion as well just to restore only, cloning is better process because it gives full access to everything like before on the internal drive.
http://www.bombich.com/index.html
Some newer Mac's have Lion Internet recovery built in where the firmware will install the Lion Recovery/OS back onto a completely blank/new hard drive.

My MacBook Pro's hard drive data recovery

A short while ago, my macbook pro wouldn't boot. I took it to an apple store close by and they said they had to reformat the hard drive. They promised they'd try to retrieve some files. Sadly, only old files were recovered, I lost all my applications, photos, and music, and school work. Is it possible to recover the data that was on my previous hard drive? I'll appreciate any information. Thank you.

If they've formatted and reinstalled on top of what was already there, it's gone. If they had pulled the old drive and you still had it, there might be a chance. This is why backups are important.

Macbook Pro Reformat Hard drive issues

Hard drive crashed a few months back in my MBP. My optical drive doesn't work and I have Snow Leopard install disks. I went to Best Buy, bought a 1TB Seagate SATA SSD+HDD hybrid drive to replace the 250 GB one I had. I'm trying to get the stupid thing to format buy I'm not having any luck. Here's what I've tried:
1. Was able to boot up through disk utility and tried to install OS Mavericks wirelessly but when I login to my apple account to verify, and click install I get a quick message stating there was a problem and to try again. It never works
2. Bought a external optical drive and tried to install Snow Lepoard but when I turn it on that way it tries to load and then goes to a gray screen tell me that my computer needs to restart. I restart it and it does the same thing.
3. Went to the Mac Store to ask some questions. . .told them I had an iMac and bought a firewire cable. I've tried to install Snow Lepoard via firewire cable but the instructions that I find just plain don't work. I run Lion on my iMac and I can get my computer to recognize my MBP but choosing that and formatting it with the drive on my iMac isn't working either.
I'm about to use the stupid MBP as a frisbee out my back patio. Please help!

My Macbook Pro is a mid-2010 model.

Buying a new MacBook Pro. Hard Drive Question.

I currently own a 13inch MacBook (late 2008) running Lion. I'm purchasing the new 13inch MacBook Pro. I currently have a 1TB internal drive in my computer and I want to use that in my new computer.
Do I have to erase everything on my current hard drive before putting it in the new computer or can I just switch the two? Any information or experiences on the matter would be great. Thanks.

As Sig says.
What you can do is to install your 1TB to an external enclosure and clone it with your new MBP.
To make sure it works after you've done the clone, boot on your externa drive after you've done the clone.
Once it boots, then you can go ahead and install it to your new MBP.
Make sure you do a backup of your files on your old drive if you want or need them.

Just loaded windows 7 on a macbook pro - how do you dual boot OS X and windows 7

Hi successfully loaded windows 7 and partitioned drive (I need windows for work Microsoft crm system)
All ok but a pain to have to keep logging off and on between OS X & Windows
I understand that there is a way to dual boot - I am running Snow Leopard on a macbook pro lap top OS x 10.6.7
Can anyone help please
Ian

You can install Parallels or Fusion, either will work. When you setup either Parallels or fusion you can tell it to use your already installed Boot Camp installation of Windows as its target guest operating system.
You would then just boot into OSx, start your VM (Parallels or Fusion), then you'll have access to both OSx and Windows without having to reboot.
I have this setup and two monitors. I have my Windows running on my external monitor and OSx running on my Macbook Pro monitor at the same time.
Beware that you will need to re-register Windows to get a second key. This is free and easily done either online or by calling the Microsoft registration number. The reason for needing a second key is that Windows, although only installed once in your Boot Camp partition sees the virtual hardware created by your virtual machine and thinks it has been reinstalled on a new computer.

Macbook Pro - 2 Hard Drives - Dual Boot OS OSX + Windows

Similar Messages

Maybe you are looking for