Macbook Pro 2008 (4,1) RAM issues

Hello all
I've had some maddening issues with installing new RAM into my Macbook Pro 2008.
Machine: MBP March 2008 (4,1) , 2.5Ghz, 2GB RAM, OSX 10.7.5
I ordered and installed a pair of 2GB RAM sticks from Crucial, to replace the two 1GB RAM sticks I had installed, to bring my machine up to a total of 4GB. Since doing that, the machine would kernel panic repeatedly (and sometimes start-up with three beeps, indicating memory issues). After checking repeatedly that they must be the right RAM modules for my machine, I got the sticks replaced by crucial, but afterwards I still had the same issue, so I determined it must be the machine's fault.
This started an arduous process of testing and trying to fix every aspect of the machine I could think of, resetting the PRAM, repairing permissions trying different combinations of RAM modules, running all the Disk-warrior and TechTool repairs and diagnostics (its clean), running the machine with no third-party devices attached, safe-boot mode, booting from an external drive, and eventually re-installing the entire operating system and running off a clean install. In all the cases, if I had the 4GB in, the machine would kernel panic. I can't begin to list all the things and combinations I tried in order to isolate the issue, but it seemed the only thing I could determine would guarantee the machine to lock-up was to run it with the 4GB.
I also ran rember utility for several hours, several times while the 4GB sticks were in (and it found nothing).
There is a curious pattern however.
Placing both the 2GB RAM (total for 4GB) modules inside the machine will guarantee a kernel panic. Placing one 2GB module and one 1GB module (total of 3GB) also guarantees a crash. However, using either of the 2GB modules alone, in either of the two slots, is perfectly acceptable. Isn't that strange?
It's almost as if the machine is allergic to having both slots occupied at once, but that doesn't make any sense because before buying the 2GB modules, it ran with two 1GB modules, one in each slot.
I'm going to try putting back in the two original 1GB modules just to see if it can still run. If anyone has any suggestions of anything I can try to get this machine working with its 4GB, I will be EXTREMELY grateful!
Thank you,
Andrew
Andrew

I tried running from 1GB + 1GB, and it ran fine for a few hours, but upon waking from sleep I got the dreaded 3 beeps. This absolutely never happens otherwise, so I know where the problem lies now. The machine is back onto a single 2GB stick and running fine.
My machine won't run with both slots used. I don't know if that is only a hardware problem, if it could be firmware or even some type of software bug, but that is where the issue is.
The RAM I ordered is the right one for my machine, according to the crucial website, and also to their ram scanning tool. They are 2GB 200-pin DDR2 SODIMM 667Mhz sticks, and I'm quite sure those are the right ones for my machine. I will contact them and point them to this thread and se what they say though.
And remember that in this case, it doesn't work with an older module either. 1GB + 2GB crashes. It eventually crashes if I have both slots occupied.

Similar Messages

Macbook Pro Early 2011 13" RAM Issues

Hello everyone,
About a month ago I realized that my computer was running extremely slow. After further inspection, I found out that somehow 1 of the 2 RAM sticks had come loose. I'm not quite sure how because I have never dropped my Macbook. Anyways, after getting this fixed at the computer store at my university, I realized that everything was working fine. However, today I noticed that there is another issue. As you can tell by the attached picture, it says that there is 4 GB of RAM installed even though it says that one of the slots is empty... I'm not quite sure what to do about this besides taking it to the Apple Store, but I would definitely prefer to not have to do this since my warranty has expired. I've been planning on upgrading to 8 or 16 GB of RAM, so if there's no other fix to this problem then I may have to go ahead and do the upgrade sooner than I thought.
If anyone has seen this before and knows a solution that would be great! Thanks!

I would run the Apple hardware test (use the extended test) to see if it identifies any hardware issue.

Macbook Pro 10.6.8 RAM Upgarde to 8 GB

I bought a macbook pro 10.6.8 a long time ago and It's working wonderful. I couldn't be happier how fast it is comparing to any other windows computers that I have used in the past. As mather of fact, I have 2 Desktop and 2 Laptops.
I'm a programmer / Web Designer and a Social Media Expert and I was hoping someone can actually enlighten me with some advices regarding this type of mac when it comes to upgrades.
I use a lot of Adobe Programs those days and or some Video Production that require a lot of memory. I was happy with everything untill I decided to upgrade my RAM to 8 GB. Right now those are my computer specifications:
Model Name:
MacBook Pro
Model Identifier:
MacBookPro7,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2.4 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
3 MB
Memory:
4 GB
Bus Speed:
1.07 GHz
Boot ROM Version:
MBP71.0039.B0B
SMC Version (system):
1.62f6
Serial Number (system):
34******ATM
Hardware UUID:
I decided to go ahead and buy 8GB or RAM from Amazon. I was very excited when I got them and decided to finally upgrade and this is what happend:
If I pull out the 2 memory sticks of 2GB each and remplace them with the new 4GB Stick each the computer froze. It restart and does not get pass the gray screen with the thing spinning for about 2 minutes before it froze.
If I only pull out one (1) Memory stick of 2GB and remplace it with 4GB, the computer works fine and it restart with no problems and I get 6 GB. After doing the Memtest, everything seems to be functioning properly. But the computer is not any faster nor I see any difference at all.
The only combination that does not function is if I use both 4GB RAM each then as I said it froze. I even called CORSAIR " The place I bought my RAM from and explain to them the ptoblem and they end up sending me another version of the 4GB but it's still the same problem " Frozen ".
A guy I've been talking to had the same issue and end up using 16GB and he told me that his Macbook pro works perfect with the combination of two (2) 8GB RAM together. Doesn't make any sens to me but it still works.
If anyone has encounter a similar problem would you please comment? Thank you all very much!
~John
<Edited By Host>

kwmlr439 wrote:
CSOUND Read the title please:
Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
Message was edited by: Shootist007
Message was edited by: Shootist007

Slow i7 MacBook Pro startup and battery life issues

Hi Everyone,
My i7 2.66GHz 15" MacBook Pro with 8GB of RAM does a couple of things that worry me
1. The battery life is poor, 127 Charge Cycles, 6 months old. I'm sat on Chrome with one window open and it's reading 3hr 16 min on 83%
2. The startup into 10.6.5 is painfully slow. It seems to load up the menu bar at the top and hang mid flow, just before the battery status and time remaining appear.
Any ideas?
Thanks in advance! Mike
Here is a copy of my startup log:
Jan 8 00:49:06 localhost com.apple.launchd[1]: * launchd[1] has started up. *
Jan 8 00:49:11 localhost com.apple.launchd[1] (com.autodesk.backburner_manager): Bug: launchdcorelogic.c:6487 (24208):22
Jan 8 00:49:11 localhost com.apple.launchd[1] (com.autodesk.backburner_server): Bug: launchdcorelogic.c:6487 (24208):22
Jan 8 00:49:11 localhost com.apple.launchd[1] (com.autodesk.backburner_start): Bug: launchdcorelogic.c:6487 (24208):22
Jan 8 00:49:12 localhost blued[15]: Apple Bluetooth daemon started
Jan 8 00:49:12 localhost mDNSResponder[18]: mDNSResponder mDNSResponder-258.13 (Oct 8 2010 17:10:30) starting
Jan 8 00:49:12 localhost configd[14]: network configuration changed.
Jan 8 00:49:12 MikeMBP15 configd[14]: setting hostname to "MikeMBP15.local"
Jan 8 00:49:12 MikeMBP15 configd[14]: network configuration changed.
Jan 8 00:49:12: --- last message repeated 1 time ---
Jan 8 00:49:12 MikeMBP15 mDNSResponder[18]: Adding registration domain ibodge.members.mac.com.
Jan 8 00:49:14 MikeMBP15 configd[14]: network configuration changed.
Jan 8 00:49:21: --- last message repeated 1 time ---
Jan 8 00:49:21 MikeMBP15 com.paceap.pacesupport[52]: /System/Library/Extensions/PACESupportFamily.kext/Contents/Resources/paceload: line 18: uname: command not found
Jan 8 00:49:21 MikeMBP15 com.paceap.pacesupport[52]: /System/Library/Extensions/PACESupportFamily.kext/Contents/Resources/paceload: line 20: [: -lt: unary operator expected
Jan 8 00:49:21 MikeMBP15 com.paceap.pacesupport[52]: /System/Library/Extensions/PACESupportFamily.kext/Contents/Resources/paceload: line 31: [: -lt: unary operator expected
Jan 8 00:49:21 MikeMBP15 com.paceap.pacesupport[52]: /System/Library/Extensions/PACESupportFamily.kext/Contents/Resources/paceload: line 35: [: -lt: unary operator expected
Jan 8 00:49:24 MikeMBP15 com.rogueamoeba.hermes[57]: unknown action: update
Jan 8 00:49:25 MikeMBP15 com.apple.launchd[1] (com.rogueamoeba.hermes[57]): Exited with exit code: 1
Jan 8 00:49:28 MikeMBP15 com.autodesk.backburner_start[60]: /usr/discreet/backburner/backburner: line 16: whoami: command not found
Jan 8 00:49:28 MikeMBP15 com.autodesk.backburner_start[60]: Must be root to run.
Jan 8 00:49:28 MikeMBP15 com.apple.launchd[1] (com.autodesk.backburner_start[60]): Exited with exit code: 1
Jan 8 00:49:31 MikeMBP15 bootlog[48]: BOOT_TIME: 1294447746 0
Jan 8 00:49:31 MikeMBP15 awacsd[24]: Starting awacsd connectivity-32 $Rev: 907 $ (Sep 29 2010 19:07:17)
Jan 8 00:49:31 MikeMBP15 awacsd[24]: Connecting AWACS client: ibodge hello.connectivity.me.com
Jan 8 00:49:32 MikeMBP15 com.apple.usbmuxd[29]: usbmuxd-207 built for iTunesTenOne on Oct 19 2010 at 13:50:35, running 64 bit
Jan 8 00:49:32 MikeMBP15 VMware Fusion 332101[82]: Starting VMware Fusion:
Jan 8 00:49:32 MikeMBP15 com.vmware.launchd.vmware[55]: VMware Fusion 332101: Starting VMware Fusion:
Jan 8 00:49:38 MikeMBP15 WDSmartWareD[53]: Daemon Start -- User registered
Jan 8 00:49:40 MikeMBP15 repair_packages[84]: PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
Jan 8 00:49:40 MikeMBP15 com.vmware.launchd.vmware[55]: 2011-01-08 00:49:40.719 repair_packages[84:907] PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
Jan 8 00:49:40 MikeMBP15 repair_packages[84]: PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
Jan 8 00:49:40 MikeMBP15 com.vmware.launchd.vmware[55]: 2011-01-08 00:49:40.723 repair_packages[84:907] PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
Jan 8 00:49:42 MikeMBP15 com.vmware.launchd.vmware[55]: Verifying files from package 'com.vmware.fusion.application' on '/'.
Jan 8 00:49:42 MikeMBP15 com.vmware.launchd.vmware[55]: Finished verifying files from package 'com.vmware.fusion.application' on '/'.
Jan 8 00:49:50 MikeMBP15 /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[37]: Login Window Application Started
Jan 8 00:49:51 MikeMBP15 vmnet-bridge[105]: UUID: Unable to open /dev/mem: No such file or directory
Jan 8 00:49:51 MikeMBP15 vmnet-bridge[105]: Dynamic store changed
Jan 8 00:49:51 MikeMBP15 vmnet-bridge[105]: Adapter: en1, Inactive
Jan 8 00:49:51 MikeMBP15 vmnet-bridge[105]: Failed to read SCproperties for key: State:/Network/Global/IPv4
Jan 8 00:49:51 MikeMBP15 vmnet-bridge[105]: Stopping bridge for:
Jan 8 00:49:51 MikeMBP15 vmnet-bridge[105]: Dynamic store changed
Jan 8 00:49:51 MikeMBP15 vmnet-bridge[105]: Started bridge for 2, en1
Jan 8 00:49:52 MikeMBP15 com.apple.launchd[1] (0x1005020b0.anonymous.vmnet-netifup[117]): Failed to add kevent for PID 117. Will unload at MIG return
Jan 8 00:49:52 MikeMBP15 com.vmware.launchd.vmware[55]: Started network services
Jan 8 00:49:52 MikeMBP15 vmnet-bridge[105]: Preferences changed called
Jan 8 00:49:52 MikeMBP15 com.vmware.launchd.vmware[55]: Verifying and re-installing files from /Library/Application Support/VMware Fusion/thnuclnt
Jan 8 00:49:52 MikeMBP15 com.apple.SystemStarter[30]: Starting Aladdin USB daemon
Jan 8 00:49:52 MikeMBP15 com.apple.SystemStarter[30]: /Library/StartupItems/Digidesign Mbox 2/Digidesign Mbox 2:start
Jan 8 00:49:52 MikeMBP15 com.apple.SystemStarter[30]: Starting Digidesign Mbox 2 Configuration Service
Jan 8 00:49:52 MikeMBP15 com.apple.SystemStarter[30]: PACESupport - launchd already started us
Jan 8 00:49:52 MikeMBP15 com.apple.SystemStarter[30]: Requesting load of /System/Library/Extensions/DigiDal.kext.
Jan 8 00:49:52 MikeMBP15 com.apple.SystemStarter[30]: /System/Library/Extensions/DigiDal.kext loaded successfully (or already loaded).
Jan 8 00:49:54 MikeMBP15 configd[14]: network configuration changed.
Jan 8 00:49:54 MikeMBP15 vmnet-bridge[105]: Dynamic store changed
Jan 8 00:49:54 MikeMBP15 vmnet-bridge[105]: Started bridge for 0, en1
Jan 8 00:49:57 MikeMBP15 coreaudiod[157]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 8 00:49:57 MikeMBP15 com.apple.audio.coreaudiod[157]: Sat Jan 8 00:49:57 MikeMBP15.local coreaudiod[157] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 8 00:49:57 MikeMBP15 coreaudiod[157]: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
Jan 8 00:49:57 MikeMBP15 com.apple.audio.coreaudiod[157]: coreaudiod: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
Jan 8 00:49:57 MikeMBP15 com.apple.audio.coreaudiod[157]: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
Jan 8 00:49:57 MikeMBP15 loginwindow[37]: Login Window Started Security Agent
Jan 8 00:49:57 MikeMBP15 WindowServer[90]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 8 00:49:57 MikeMBP15 com.apple.WindowServer[90]: Sat Jan 8 00:49:57 MikeMBP15.local WindowServer[90] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jan 8 00:50:08 MikeMBP15 SecurityAgent[159]: NSSecureTextFieldCell detected a field editor ((null)) that is not a NSTextView subclass designed to work with the cell. Ignoring...
Jan 8 00:50:09 MikeMBP15 loginwindow[37]: Login Window - Returned from Security Agent
Jan 8 00:50:09 MikeMBP15 loginwindow[37]: USER_PROCESS: 37 console
Jan 8 00:50:09 MikeMBP15 com.apple.launchd.peruser.501[172] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Jan 8 00:50:15 MikeMBP15 com.apple.launchd.peruser.501[172] (com.folabs.proremote[197]): open("/var/log/ProRemoteServer/out.log", ...): No such file or directory
Jan 8 00:50:15 MikeMBP15 com.apple.launchd.peruser.501[172] (com.akamai.client.plist[199]): Bug: launchdcorelogic.c:4139 (24208):13
Jan 8 00:50:15 MikeMBP15 com.apple.launchd.peruser.501[172] (com.folabs.proremote[197]): open("/var/log/ProRemoteServer/error.log", ...): No such file or directory
Jan 8 00:50:16 MikeMBP15 com.folabs.proremote[197]: /Library/Application S
Jan 8 00:50:16 MikeMBP15 com.folabs.proremote[197]: upport/ProRemote/ProRemoteServer.conf
Jan 8 00:50:17 MikeMBP15 ProRemoteServer[197]: Listening for MIDI: /var/tmp/com.folabs.proremoteserver/socket
Jan 8 00:50:17 MikeMBP15 ProRemoteServer[197]: Listening for Remote: [8183]
Jan 8 00:50:19 MikeMBP15 com.apple.launchd.peruser.501[172] (com.apple.Kerberos.renew.plist[193]): Exited with exit code: 1
Jan 8 00:50:19 MikeMBP15 ServerScanner[189]: Preference says we shouldn't scan
Jan 8 00:50:22 MikeMBP15 StatusMenu[205]: Attempting to monitor /Library/Application Support/WDSmartWare
Jan 8 00:50:22 MikeMBP15 StatusMenu[205]: Monitoring /Library/Application Support/WDSmartWare
Jan 8 00:50:23 MikeMBP15 MediaLinkHelper[212]: MediaLinkHelper: Starting up…
Jan 8 00:50:23 MikeMBP15 Rowmote Helper[214]: Est <AsyncUdpSocket: 0x317cc0> (5843)
Jan 8 00:50:26 MikeMBP15 netsessionmac13d7a2d[199]: * __NSAutoreleaseNoPool(): Object 0x608460 of class NSCFString autoreleased with no pool in place - just leaking
Jan 8 00:50:26 MikeMBP15 netsessionmac13d7a2d[199]: * __NSAutoreleaseNoPool(): Object 0x608490 of class NSCFString autoreleased with no pool in place - just leaking
Jan 8 00:50:26 MikeMBP15 MediaLinkHelper[212]: DeviceManager: Initializing local device: NRMediaServerDevice…
Jan 8 00:50:26 MikeMBP15 MediaLinkHelper[212]: RootContainer: Root container initialized!
Jan 8 00:50:27 MikeMBP15 MediaLinkHelper[212]: MediaServerDevice: Found transcoder: NRAlbumArtTranscoder…
Jan 8 00:50:27 MikeMBP15 MediaLinkHelper[212]: MediaServerDevice: Found transcoder: NRDirectTranscoder…
Jan 8 00:50:27 MikeMBP15 MediaLinkHelper[212]: MediaServerDevice: Found transcoder: NRJPEGTranscoder…
Jan 8 00:50:28 MikeMBP15 MediaLinkHelper[212]: MediaServerDevice: Found transcoder: NRMEncoderTranscoder…
Jan 8 00:50:28 MikeMBP15 MediaLinkHelper[212]: DeviceManager: Registering remote device class: NRPlayStation3Device…
Jan 8 00:50:29 MikeMBP15 MediaLinkHelper[212]: MediaLinkHelper: DeviceManager ready.
Jan 8 00:50:31 MikeMBP15 VMware Fusion Helper[213]: Could not connect the action buttonPressed: to target of class NSApplication
Jan 8 00:50:32: --- last message repeated 3 times ---
Jan 8 00:50:32 MikeMBP15 pkgutil[224]: PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
Jan 8 00:50:32 MikeMBP15 [0x0-0x16016].com.vmware.fusionDaemon[213]: 2011-01-08 00:50:31.999 pkgutil[224:60f] PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
Jan 8 00:50:32 MikeMBP15 pkgutil[224]: PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
Jan 8 00:50:32 MikeMBP15 [0x0-0x16016].com.vmware.fusionDaemon[213]: 2011-01-08 00:50:32.002 pkgutil[224:60f] PackageKit: * Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
Jan 8 00:50:50 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100b1c960 of class NSCFString autoreleased with no pool in place - just leaking
Jan 8 00:50:50 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100e419c0 of class NSURL autoreleased with no pool in place - just leaking
Jan 8 00:50:50 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100e53020 of class NSURLRequest autoreleased with no pool in place - just leaking
Jan 8 00:50:50 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100e42580 of class NSCFString autoreleased with no pool in place - just leaking
Jan 8 00:50:50 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100e51380 of class NSCFString autoreleased with no pool in place - just leaking
Jan 8 00:50:50 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100e52970 of class NSCFString autoreleased with no pool in place - just leaking
Jan 8 00:50:50 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100e54350 of class NSCFString autoreleased with no pool in place - just leaking
Jan 8 00:50:51 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100b788c0 of class NSHTTPURLResponse autoreleased with no pool in place - just leaking
Jan 8 00:50:51 MikeMBP15 Safari[229]: * __NSAutoreleaseNoPool(): Object 0x100e54540 of class NSCFData autoreleased with no pool in place - just leaking
Jan 8 00:51:28 MikeMBP15 Apple80211 framework[178]: Scan() error 16 (Resource busy)
Jan 8 00:51:28 MikeMBP15 Apple80211 framework[178]: __performScan() EBUSY, sleep 1 sec, try again
Jan 8 00:51:46 MikeMBP15 [0x0-0x1b01b].com.apple.Safari[229]: Canceleld; 0; Empty 1
Jan 8 00:52:23: --- last message repeated 162 times ---
Jan 8 00:51:46 MikeMBP15 [0x0-0x1b01b].com.apple.Safari[229]: Canceleld; 0; Empty 1
Jan 8 00:52:25: --- last message repeated 6 times ---
Jan 8 00:52:25 MikeMBP15 System Preferences[236]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Jan 8 00:52:57 MikeMBP15 System Preferences[241]: dlopen_preflight failed with dlopen_preflight(/Users/Mike/Library/PreferencePanes/AkamaiNetSession.prefPane/ Contents/MacOS/AkamaiNetSession): no suitable image found. Did find:\n /Users/Mike/Library/PreferencePanes/AkamaiNetSession.prefPane/Contents/MacOS/Ak amaiNetSession: GC capability mismatch for /Users/Mike/Library/PreferencePanes/AkamaiNetSession.prefPane
Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x7fff7101c490 of class NSCFString autoreleased with no pool in place - just leaking
Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x10210bcd0 of class NSURL autoreleased with no pool in place - just leaking
Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x100e3fcf0 of class NSURLRequest autoreleased with no pool in place - just leaking
Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x10210bcd0 of class NSURL autoreleased with no pool in place - just leaking
Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x100e45460 of class NSCFDictionary autoreleased with no pool in place - just leaking
Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x100e43e50 of class NSError autoreleased with no pool in place - just leaking
Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x100e46e60 of class NSCFString autoreleased with no pool in place - just leaking
Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x100e45100 of class NSCFString autoreleased with no pool in place - just leaking
Jan 8 00:53:10 MikeMBP15 Safari[244]: * __NSAutoreleaseNoPool(): Object 0x100e1cf30 of class NSConcreteMutableData autoreleased with no pool in place - just leaking
Jan 8 00:55:10 MikeMBP15 [0x0-0x20020].com.apple.Safari[244]: Canceleld; 0; Empty 1
Jan 8 00:55:11: --- last message repeated 317 times ---
Jan 8 00:55:11 MikeMBP15 [0x0-0x22022].com.google.Chrome[249]: [0108/005511:INFO:/b/build/slave/chrome-official-mac/build/src/chrome/app/break pad_mac.mm(89)] Breakpad disabled
Jan 8 00:55:14 MikeMBP15 [0x0-0x22022].com.google.Chrome[249]: objc[253]: Class CrApplication is implemented in both /Applications/Google Chrome.app/Contents/Versions/8.0.552.231/Google Chrome Helper.app/Contents/MacOS/../../../Google Chrome Framework.framework/Google Chrome Framework and /Applications/Google Chrome.app/Contents/Versions/8.0.552.231/Google Chrome Framework.framework/Internet Plug-Ins/PDF.plugin/Contents/MacOS/PDF. One of the two will be used. Which one is undefined.
Jan 8 00:55:14 MikeMBP15 [0x0-0x22022].com.google.Chrome[249]: objc[253]: Class NoOp is implemented in both /Applications/Google Chrome.app/Contents/Versions/8.0.552.231/Google Chrome Helper.app/Contents/MacOS/../../../Google Chrome Framework.framework/Google Chrome Framework and /Applications/Google Chrome.app/Contents/Versions/8.0.552.231/Google Chrome Framework.framework/Internet Plug-Ins/PDF.plugin/Contents/MacOS/PDF. One of the two will be used. Which one is undefined.
Jan 8 00:55:14 MikeMBP15 [0x0-0x22022].com.google.Chrome[249]: objc[253]: Class TaskOperation is implemented in both /Applications/Google Chrome.app/Contents/Versions/8.0.552.231/Google Chrome Helper.app/Contents/MacOS/../../../Google Chrome Framework.framework/Google Chrome Framework and /Applications/Google Chrome.app/Contents/Versions/8.0.552.231/Google Chrome Framework.framework/Internet Plug-Ins/PDF.plugin/Contents/MacOS/PDF. One of the two will be used. Which one is undefined.

There seems to be a lot of unanswered questions floating around here.
Its kind of scary seeing some of these "issues" and not seeing any answers.
I just spent 3 g's on a 2011 mbp, and I am really hoping all the great things that I've learned about Apple still rein true. Those are the only reasons I bought one.
My startup is very slow as well.

How to replace the hard drive in MacBook Pro 2008

Is there an instruction manual or bulletin on replacing the hard drive in a MacBook Pro, 2008 late year model?

ifixit.com.
RAM, HD, other repair instructions for all macs. Also ranks each new model for its "self-service ease". I think the new Retina models are rated 2 out of 10.

My macbook pro 2008 running OS X 10.5.8. But I can't connect my new iPhone!

My macbook pro 2008 running OS X 10.5.8. However I have recently bought an iPhone5 and I cannot curently connect my iPhone to my mac, as I need iTunes 7 - BUT i can't download iTunes 7 since my software does not support it!
So I obviously need to connect my iPhone to my laptop, but the software is getting in the way! How can I update my software so that I can run iTunes 7
Many thanks

Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
Whilst Apple have withdrawn Snow Leopard from their stores, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $20 for a single user, or $30 for a family pack that covers up to 5 Macs. You can also purchase the code to use to download Lion from the same number (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/
If you are outside the US call your national Apple Helpline:
http://support.apple.com/kb/HE57
If you're in the UK, use this number: 0871 508 4400
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
To use iCloud you have to upgrade all the way to Mountain Lion:
http://support.apple.com/kb/HT4759

OSX Mavericks on a Macbook Pro 2008: is it possible?, OSX Mavericks on a Macbook Pro 2008: is it possible?

I've got a Macbook Pro 2008 with Snow Leopard installed, 4Gb Ram and 500Gb DD ... is it possible or recomendable to update to OSX Mavericks? Compatibility says: OS 10.6.8 or later. I'm just that 10.6.8
Can you help me out? Thank you!

To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
Check to make sure your applications are compatible. PowerPC applications are no longer supported.
Application Compatibility
Applications Compatibility (2)

MacBook Pro 2008 not turning on, no sign of power and screen remains black

I have a MacBook Pro 2008.
It was working fine until when one morning i wanted to turn it on as usual only to find out that it can not power on.
When i press the power-on button, i can hear the hard disk spinning but no display, the screen remains black like not getting power.
No beep sound when tried to boot without RAM installed.
The battery and the Charger worked fine when tested with another computer.
The RAM works fine when tested with another Computer too.
What could be wrong with my computer, i hope it is not the board that is dead.
How can i overcome this problem?

Op Charles,
You can try a SMC reset:
http://support.apple.com/kb/HT3964
Follow directions for a battery that applies to your machine.
http://support.apple.com/kb/TS1365
http://support.apple.com/kb/TS1367
You can check these as well
It sounds as thogh the the GPU may be dead, you can take it in to an Apple Genius (make an appointment) they will disgnose it for free and give you your options.
Good Luck

MacBook Pro 2008, won't go past the start up page, just keeps telling me to restart

I have a MacBook Pro 2008, it freezes then has pink pixels, restarts but then says I need to restart it again but it never gets past the start up page, just keeps telling me to restart again. I've tried taking out the battery and plugging it in, I'm not sure what else to do

Don't know about the pink stuff....
You may be experiencing a Kernel Panic, as shown in Apple doc. #HT1392. If not disregard
Bad or incompatible RAM is, more often then not, the cause of most Kernel Panics. It could also just need to be reset. Here's the most used site for Resolving Kernel Panics. Please do all the steps in order, even if you don't think you need to do a certain step.
Here is a great MacFixIt article.  Good Luck! DALE

Macbook Pro 2008. My screen stayed black and is unresponsive.

Macbook Pro 2008. My screen stayed black and is unresponsive and sleep light is on. I shut down and then restarted and nothing happened on screen but sleep light came on and is solid.

It could possibly be the video card, or the logic board. You could try a smc reset if you have not done s yet. smc reset:
http://support.apple.com/kb/HT3964
I had an issue similar to this, and there was a bad logic board, hard drive and video card.
You might want to bring it in to the Apple store, they do the diagnostic for free and give you a repair price.
They offer a flat repair rate, which they fix what ever is wrong as long it was due to liquid damage.
The repair cost me about 1/3rd the price of a new machine and the machine has been fine ever since.
It's worth getting it checked out.
ATB

Improve performance on macbook pro 2008

I have a macBook pro 2008 15 inch screen (aluminum body)
I have a BIG FAT Aperture library now (25000 images+) and the current config (4 GIG working memory) is just squeaking by
I have been told you can expand the working memory to 8 GIG with OS X- the manual however says max 4.
If you can inform me and have the time, I'd appreciate it
better a hundred or so for new memory than 2K+ for a new machine
thanks to all for reading and considering this request
respects
Dave Ross

If Page Ins are more than about 10% of Page Outs after a long day of your normal work, that work would benefit perceptibly from more RAM. The higher the percentage, the greater the benefit. My guess is that with an Aperture Library that large, unless you have nothing but Aperture running, more RAM will probably turn out to be helpful.
If your MBP is one of the unibody models, it can use 8 GB. if it's an early-2008, non-unibody MBP, it can only use 6 GB.

How do i install a free osx or operating system on my macbook pro 2008?

Hey so the go is i have a macbook pro 2008 i love it too bits but for some reason my screen flickers all the time but ill just have to deal with it. Secondly i cant install any operating systems because i dont have a mac to download osx from or mountain lion. And when i go to download it directly from my macbook pro it says i need to buy it :/ or i dont have the licence i cant remember but i just want it working whoever can help me i would much appreciate!! thankyou for reading this and also ps my screen when im on the net on it in the safari osx menu it intermittly spazzes and all the url bars keep clicking etc i dont know what the problem is but i would appreciate some advice or help! it is a good machiene quiet no damage looked after just got it given to me from a family member but i have had no luck so far

Jamesandmacbooks,
if by “free” you mean “gratis” (as opposed to, say, “open source”), then there’s only one version of OS X to date that’s gratis, namely Mavericks. You can only download Mavericks if you currently have Mac OS X 10.6.6 or later installed. If you’re still running Leopard (Mac OS X 10.5.something) on your 2008 MacBook Pro, then you’ll need to first purchase the white retail Snow Leopard DVD, install it on your MacBook Pro, and run Software Update to get it to 10.6.8, after which you can download Mavericks gratis from the Mac App Store and install that. Be sure that your MacBook Pro meets all of Mavericks’ system requirements before trying to install it. If you currently run any PowerPC apps, note that they won’t be supported in any version of OS X after Snow Leopard.

I got a macbook pro 2008 and can not back up using time machine. it eject my external hard drive everytime. does someone has a fix???

i got a macbook pro 2008 and can not back up using time machine. it eject my external hard drive everytime. does anybody has a fix???

Does your external hard drive have it's own power supply? It should.
Is your external hard drive formatted with the NTFS file system? It won't work.
It needs to be formatted either with Mac OS Extended or FAT32.
(There are drivers available to add NTFS support to OS X but their quality is unknown, especially the "free" ones.)

How do I use my serial number to find information about my MacBook Pro's Processor and RAM?

So I want to find information about my MacBook Pro's processor and RAM using the serial number because the MacBook no longer works. I remember being able to find this information on the apple website before, maybe by using the coverage checker. Did they take this information out of the coverage checker? Is it no longer possible for a costumer to obtain this information?

Append the last three characters of it to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
This won't reveal how much RAM it currently has installed.
(117541)

I have a mid 2007 MacBook Pro with 2GB of RAM and NVIDIA GeForce 8600M graphics. Is it possible to upgrade the RAM and the graphics card?

I have a mid 2007 MacBook Pro with 2GB of RAM and NVIDIA GeForce 8600M graphics card. Is it possible to upgrade the RAM and the graphics card?

The RAM can be upgraded as indicated below. The Graphics card can not be upgraded.
Maximum Memory
6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM

Macbook Pro 2008 (4,1) RAM issues

Similar Messages

Maybe you are looking for