MacBook Pro 2008 Airport connections

I know that a number of people have posted messages regarding the problem with Airport connections but I have not found a solution yet. My MackBook Pro 2008 has iOS 10.6.8. I can see Airport on (bold signal) but I can't access the interenet though I am able to use Skype. This had happened before but the problem was resolved by itself. The laptop works fine when connected by an ethernet cable. Can any one suggest any solutions please? Please note that I do not use Airport Exress or Time Capule as far as I know.
Thank you.
Prithvi.

Can your MacBook Pro (MBP) connect to other wireless network AND gain Internet access, just not yours? Regardless, when a computer can connect to the local wireless network BUT is unable to gain Internet access, it typically is due to missing or corrupt DNS server information. Think of DNS as the Internet's version of a phone book.
One simple test, is to enter the web site's actual IP address instead of its URL in your web browser. If you can now access the website, you verified that the DNS information in your MBP AirPort profile is incorrect.
Another test, is to substitute a known set of DNS servers, like the ones provided by OpenDNS. Again, if you can access the websites by their URLs, it was the DNS servers information that was incorrect.

Similar Messages

  • MacBook Pro and Airport connection problem

    My MacBook Pro has a volatile connection to my Airport Express base station.
    I have a 2-month old 15.4" MacBook Pro (Intel Core 2 Duo), all software updates are installed, etc. I connect to the internet through an Airport base station. For the past few days my MBP has had a dodgy connection, slowing down at seeming random and then occasionally disconnecting from the base station entirely, although the Airport icon on the MBP is always on. While downloading a file I noticed that the speed of the connection was incrementally slowing until it stopped, and it was only after a couple of retries and then connecting to the base station again (by finding it amongst the other networks on the pull-down menu that you get when you click on the Airport icon) that my connection resumed at its previous speed.
    My 12" PowerPC iBook connects to the internet over this Airport base station at full speed, no problems.
    I've tried resetting the PRAM on my MBP without change.
    One possibly noteworthy change is that this past week I updated my Parallels software to 3.0, which may have an effect based on some of the other threads I've read.
    What now?!

    After trying all of the above the suggestions, the problem returned as before. However, after digging some more I discovered that the issue appears to lie with the 10.4.10 version of the Mac OS; when I checked the software log under the system profiler I noticed that I had installed that update at about the time my Airport problems began. Apple then quietly released a v 1.1 combo update to 10.4.10 on July 2nd, which once installed appears to have resolved the problem. You can find the download at http://www.apple.com/support/downloads/macosx10410comboupdatev11intel.html
    What's curious is that originally Apple listed that the v 1.1 combo update resolved some issues with RAW image data, and some sound problems, which don't seem to have anything to do with Airport.

  • MacBook Pro loses airport connection if left alone for a while

    Hi Everyone,
    Everytime I walk away from my MBP, I come back only to find out that I no longer have any bars on my airport icon in the menu bar. I have tried moving airport to the top and unchecking the other options in the network preferences. This happens to me at home with an airport express, as well as here at work with a 3rd party wireless router. It's not a big deal, but it is somewhat of a tedious chore.
    Any other suggestions?
    Thanks,
    JV

    This is a known issue with what we think is the airport firmware.
    We hope Apple will be providing a software fix soon.

  • I can print from my macbook pro using airport express usb connected printer, however my iPad is looking for an airprint printer.  Can I direct the iPad to the usb connected printer.  Both macbook and iPad confirm a wifi connection through the airport exp.

    I can print from my macbook pro using airport express usb connected printer, however my iPad and iphone are looking for an airprint printer.  Can I direct the iPad/iphone to the usb connected printer.  Macbook iphone and iPad confirm a wifi connection through the airport express.

    You will need to install an App like Print Central on the iPad to try to print to the printer. It will allow you to print to most printers. Check with their support folks if you need more info.
    PrintCentral for iPad on the iTunes App Store

  • My macbook pro 2008 running OS X 10.5.8. But I can't connect my new iPhone!

    My macbook pro 2008 running OS X 10.5.8. However I have recently bought an iPhone5 and I cannot curently connect my iPhone to my mac, as I need iTunes 7 - BUT i can't download iTunes 7 since my software does not support it!
    So I obviously need to connect my iPhone to my laptop, but the software is getting in the way! How can I update my software so that I can run iTunes 7
    Many thanks

    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    Whilst Apple have withdrawn Snow Leopard from their stores, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $20 for a single user, or $30 for a family pack that covers up to 5 Macs.  You can also purchase the code to use to download Lion from the same number (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
    http://www.apple.com/osx/specs/
    If you are outside the US call your national Apple Helpline:
    http://support.apple.com/kb/HE57
    If you're in the UK, use this number: 0871 508 4400
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
    To use iCloud you have to upgrade all the way to Mountain Lion:
    http://support.apple.com/kb/HT4759

  • Setting up new ipad 2. Won't accept my PW for my Airport Extreme (Wi Fi network?)  Where is the PW for my WiFi? I am stymied. Can I set up through My MacBook Pro, which IS connected to my WiFi network?

    Setting up new ipad 2. Won't accept my PW for my Airport Extreme (Wi Fi network?)  Where is the PW for my Wi Fi? I am stymied. Can I set up through my MacBook Pro, which IS connected to my WiFi network?

    If you could provide the make and model number of the modem that the AirPort Extreme will be connecting to, we can likely tell you a bit more about what to expect in the way of getting the AirPort set up and working.
    Unfortunately, "plug and play" does not apply here. You will need to set up and configure the AirPort Extreme using your iPad or iMac to name the AirPort as a device, assign a device password, name the wireless network, assign a device password and a few other things.
    Once the AirPort Extreme is set up, you can connect the PC to one of the LAN <--> ports on the AirPort Extreme using an Etherent cable.
    The iPad and iMac will connect to the wireless network that the AirPort Extreme provides.

  • Can't connect to internet via MacBook Pro to Airport Extreme

    I can't connect to internet via MacBook Pro to Airport Extreme. I reset AE and modem (power down and back up again). Some computers on my home network will connect fine and others won't. The ones that won't don't populate the DNS server or the Search Domains. AE shows up on all the machines. I have one computer also connect to AE via ethernet and it has the same symptoms. Why do some Macs connect and others don't. Even when I get them to connect when I shutdown or put in sleep mode over night I lose the internet connection and have to start all over. Very frustrating.

    Regrettably no replies. I have struggled with this for days with no success and I have given up on the Airport Extreme. I have found several other Forum posts with very similar problems and no one seems to have a solution to this. It seems other wireless routers work better than the Apple product. I was able to get my old Linksys wireless router reset and it is set up and working well. The Linksys router does populate the DNS servers and domains where as the AE does not. Apple engineers should look into this. If I am mistaken and there is a fix for this someone please let me know, otherwise my AE will probably appear on Ebay very soon.

  • Would like my macbook pro to only connect to time capsule and not to airport express that is extending network.  Is there a way to do this?

    I have a network set up with a main time capsule and airport express.  The airport express is configured to extend network.  While its fine for our iphones and ipad to connect to the express, I would like the Macbook pro to only connect to the time capsule as it seems to run faster.  Any way to do this?

    You are extending the 2.4ghz.. as that is the only way you can connect iphones.
    But if you have Gen2 or later TC you can setup 5ghz to use a different wireless name to 2.4ghz.. and it is much faster.. you need to be close to the TC though.. like in the same room.
    Make sure you download 5.6 airport utility if you haven't already.. go to the wireless options and the extra wireless area.. set a different wireless name (SSID in everybody but apple's book). Then you can deliberately select it.

  • 15" MacBook Pro randomly loses connection to my AirPort Express wi-fi network.

    My 15" MacBook Pro randomly loses connection to my AirPort Express wi-fi network. I have to switch off wi-fi on my Mac then switch on again to reconnect. Any reason why this random occurrence keeps happening which never happened before? Any solutions and fixes would also be welcomed.
    Jazz

    In the airport utility, you can alter the radio modes... and change the channels from automatic to a manual one.
    Hold down the Option key, and  click on your wifi icon, it will tell you what channels are currently being used on your OSX.

  • My macbook pro won't connect to my airport extreme

    My Macbook Pro won't connect with my airport extreme network....the extreme seems to be working fine....Any thoughts? I ahve tried diagnositics and assistant....thanks

    OOPS...it actually says "Incompatible security". Any ideas? I had no problems connecting to my other wireless network at home.

  • 2008 MacBook Pro with wifi connectivity issues

    Hello all,
    My MacBook Pro has stopped connecting to my wireless internet at my house. Works fine when connected to the Ethernet, but no luck with wireless. My iPad, iPhone, and wife's MacBook Pro have no issues picking up the signal. When I attempted the network diagnostics, the wifi will not turn on. The button that enables you to TURN ON WIFI does not respond. I made a trip to the local apple store where they reset the wireless and it worked fine in the store. Took it home and same problem still existed.   Diagnostic report at the apple store showed no problems with wireless card.
    Any thoughts, comments, or wisdom would be appreciated!

    Apple released a firmware update for your MBP model to enable it to charge properly with the new-style adapters, after failures to do so were widely reported. Here's an article about the problem:
    http://support.apple.com/kb/TS3499
    And here's a link to the update:
    http://support.apple.com/kb/DL1311
    As with all firmware updates, it's essential to follow the installation instructions to the letter.

  • I installed my new iMac with my Macbook Pro 2008 backup and created a network with the iMac and now the Macbook Pro cannot get internet.

    I installed my new iMac with my Macbook Pro 2008 back up.  I created a iMac network with Airport extreme, but now my Macbook Pro cannot get internet.  any ideas on why or what to do about it.

    Hello 1BillyMac,
    It seems you have a network conflict that isn't allowing your MacBook Pro to connect to the internet. This may be caused by both computers sharing identical network settings. You may want to consider creating a new network location on your MacBook Pro to assign new network settings. The following article will instruct you on how to do that:
    OS X Yosemite: Add a network location
    A network location is a group of network settings
    A network location is a group of network settings for your various network services (Ethernet or Wi-Fi for example).
    If you often change network settings, you may find switching between locations quicker and easier than repeatedly modifying individual groups of settings. 
    For example, you might want to make a location for “home,” where you connect to the Internet with a telephone modem, and a location for “office,” where you connect to your company network and the Internet using Ethernet or AirPort. 
    Choose Apple menu > System Preferences, then click Network.
    Click the Location pop-up menu, choose Edit Locations, then click Add . 
    Enter a name for the location, then click Done.
    Enter settings for each network connection service you want to use in that location.
    After you create your locations, you can switch all of your network settings by clicking the Location pop-up menu and choosing a different location.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • My MacBook pro will not connect to the Internet through wifi yet all other devices do

    My MacBook pro will not connect to the Internet through wifi. I have several other wifi enabled devices and they are all connected to the Internet just fine... What could/would cause this?

    Disable your AirPort and enable in a second. Or check, maybe you need to type in correct digits in; Settings/Network/Advanced/Configure...

  • How to backup MacBook Pro without AirPort Time Capsule or External hard drive

    How to backup MacBook Pro without AirPort Time Capsule or External hard drive

    This is crude but if you need a work around, just plug the USB drive directly into the iMac.. copy the files to it.. then plug it into the TC.
    You also do not need to use the TC as an intermediary between your iMac and MBP.. just turn on sharing in the computer.. so you can directly copy files from one to the other.. Macs have public access directory preconfigured for each user account.
    As far as mounting the TC..
    In finder use Go, Connect to server.. and type.
    AFP://TCname or TCipaddress
    Where TCname is the actual name of the TC.. I strongly recommend you follow SMB network rules.. ie if your TC has a name like
    Fred Blog's Time Capsule 2445566.
    It is too long.. it has spaces and it has non-alphanumeric characters.
    Shorten it to FredTC
    No spaces no characters that are NOT alphanumeric.
    TCIPaddress is simply the standard IP.
    You can also use CIFS://TCname which according to the article forces the connection back to SMB1 rather than SMB2 which as usual is broken.
    But I would definitely use AFP if possible. I cannot understand the decision to move to SMB as standard.

  • Macbook pro and airport extreme don't work

    A friend (and all those tv commercials) say everything just works with Macs. Well, not exactly. New Macbook Pro and Airport Extreme can't connect me to the internet. I still have PC connected via ethernet cable to my cable modem and router which is in the basement where the cable enters the house. I've tried the different options in Airport Extreme setup and nothing works. It doesn't help Apple assumes I know everything about DHP PPPOE NAT or whatever all those silly things are.
    Can anyone explain in +very simple+ terms how I get this expensive piece of aluminum connected to the internet?
    Thanks.

    Hello sofarapplesux. Welcome to the Apple Discussions!
    I assume that you will continue to use the modem and router in the basement to get your Internet access ... correct? What is the make/model of this router?
    If that's the case, I will also assume that you have the 802.11n AirPort Extreme Base Station (AEBSn) connected by Ethernet to this router ... correct?
    So your overall network configuration should look something like the following:
    Cable modem > (Ethernet cable) > \[Internet port] router \[LAN port] > (Ethernet cable) > \[WAN port] AEBSn ... close?

Maybe you are looking for