MacBook Pro (2009) 4K / 1440p Monitor (Samsung u28d590d + Kogan)

Hi,
I have a MacBook Pro 17in (2009) and I'm trying to get an image on the new Samsung U28D590D monitor.
Not expecting to get 4k resolution, as I know my laptop is not capable of that, just want to get 2560x1440.
I know this resolution is possible to achieve as I could get it on my Kogan monitor.
On the Samsung when connecting through MiniDp to Dp I get only a black screen, when connecting MiniDp to HDMI I can only get 1080p.
Have tried both changing the refresh rate but still no luck.
Is anyone able to shed some light on the situation?
Thanks.

Have you looked at this?
http://support.apple.com/en-us/HT6008
You might contact Samsung technical support.
Ciao.

Similar Messages

Macbook Pro 2009 and Dell monitor U2412Mb

Hi All,
I've had my MacBook Pro and my Dell monitor working perfectly well for over a year. I did the latest OS software update and POW Mac won't recongise my sreeen. I've looked for a new driver to no avial. Can anyone help me to get them talking again?
Rhoda123

Hi Rhoda123!
It sounds like you may need to reset a part of your system that deals with your video card, and this is commonly known as PRAM. We have an article that talks about the functioning of this part of your computer and how to reset it, which can be found here:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Specifically, this section will probably be the most relevant to resolving your issue:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
After resetting NVRAM or PRAM, you may need to reconfigure your settings for speaker volume, screen resolution, startup disk selection, and time zone information. If issues persist, your Mac's logic board battery (not a portable Mac's rechargeable battery) may need to be replaced. The logic board battery helps retain NVRAM/PRAM settings when your computer is shut down. You can take your Mac to a Mac Genius or Apple Authorized Service Provider to replace the battery on the logic board.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Apple 20" CD connects fine to MacBook Pro 2009 via DVI to Mini displayport (adapter) but not to Radeon 5770 (either MDP ports) on MacPro 2008?! Have Eizo CG223 on DVI to 5770. Any ideas?

Here's the setup:
Eizo Coloredge CG223 DVI to DVI on MacPro 5770 interface (ACD works fine on this too, naturally).
Apple Cinema Display 20" have the DVI connector. I have a Mini Displayport to DVI adapter on this, into one of the 5770's MDPs, neither of which seem to work.
Plug the same ACD via DVI (with DVI to MDP adpater) into my MacBook Pro 2009 MDP and it works fine as a second screen.
So what's up with the 5770 MDPs? I've seen online that the card should at least support two displays, either MDPs x2 or MDP and DVI. I've seen there may be an issue with three, not two.
Any ideas please?
Thanks,
Y

Striped down to bare inputs - monitors and keyboard/mouse. Works! Dimerising must have interfered with it. Phew!

MacBook Pro & Cintiqu 13HD & Another monitor

I have the new retina display MacBook Pro 15 inch 2.3Ghz with Retina display and a Samsung 24" monitor that uses my HDMI port. I would like to also purchase a Cintiqu 13HD. Is it possible to have the Cintiqu and the Samsung monitor all plugged into my MacBook Pro and have 3 monitors essentially? If I need to purchase other cables to make this happen please let me know. Thank you.

I have a 15" MBP and 23" Cinema Display, and my monitor has recently started doing similar things. Computer does not recognize display. Also the display's power on led on the front is not on constantly like it was in the past.
It feels like the monitor is starting to fail.
This monitor was never transported after it was first setup.
Computer normally operated in closed mode, using CD as primary monitor.

Hi, I am using macbook pro 2009 model.In that, there is wifi hardware is not installed. I am not able to use wireless networks. Anybody can help me out.

Hello,
I am using Macbook pro 2009 model. In that, when I tried to connect wireless network and wifi. I am not able to do. I have done R & D regarding this issue. Some them advice to do some below steps.
Restart your Mac.
upon start-up, hold down the Opt key until you see your drives.
click on the recovery drive (note: this will not affect or delete any files you currently have).
login if needed.
in the top right hand corner you will see the Wi-Fi icon (hopefully). Click the icon and then click "turn wifi Off" and then again click "turn wifi ON"
restart your Mac again and start it up normally.
recover from your near-heart attack.
I've followed your 1 to 4 steps & then after clicking on the wifi icon, I found Wi-Fi: No hardware installed just beneath the icon. That means no Wifi hardware is installed in this machine. Do you have any suggestion about installing it? I mean how can I get that hardware? Is it available on internet? Thanks a lot again.

Apparently you have tried everything except - take the monitor in question to the Apple Store along with your computer. If it works there, the mystery continues.

Apple thunderbolt display can work with a macbook pro 2009?

Apple thunderbolt display can work with a macbook pro 2009 (mini display port? The image passes through the mini display port to the monitor, but the connections (Firewire, USB, ethernet) do not work. Can you confirm?

I'd love to get confirmation if this is the case too. I was all ready to buy the new iMac until I found I couldn't use it as an external monitor for my DisplayPort-based MacBook Pro. And then I was all ready to buy the new display.
I really hope Apple hasn't restricted this to purely Thunderbolt-equipped Macs. I know I'll end up upgrading my MacBook at some point but I can't do so just yet, and this means I'll have to go for some third-party display, camera, speakers etc for the new Mac Mini which is crazy.
James

Using Mini DisplayPort to VGA Adapter to connect Macbook Pro (2009) for a presentation via projector.

When I connect my Macbook Pro (2009 model) using a Mini DisplayPort to VGA adapter to display a presentation via projector, only the top-left portion of what is displayed on my Macbook Pro's screen is displayed on the projector, as though I zoomed in on that portion of my screen. The projector is on and the adapter and the cable that connects the adapter to the projector machine is correctly connected. Any suggestions on how to fix this problem?

Hi glraczon.support,
It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
Here is an article that may help you with that process:
OS X Mountain Lion: About the Display pane of System Preferences
http://support.apple.com/kb/HT5369
Thanks,
Matt M.

How do i updates itunes on a macbook pro 2009 10.5.8 to newer 10.6.8

Hey guys i hope someone can help me. I recenlty brought an older model macbook pro 2009 with itunes 10.5.8 on it. for a great low price of $ 300 dollars. How ever i cant update a newer version of itunes to replace the 10.5.8. So everytime I plug my new ipad into the older mac it says i need itunes 10.6.8 or higher. how do i update to a newer version for free???? youtube was not helpful or goole. So I am stuck.

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.

Why is it that when I plug my Macbook Pro to an external monitor, the external monitor turns black and shows the mouse only

Why is it that when I plug my Macbook Pro to an external monitor, the external monitor turns black and shows the mouse only

Hi, yes preferences sees there is a second display it recognises what make of monitor it is etc but I just get a blank blue screen on the monitor when I change it to the hdmi setting! I have tried with mirroring on and off, rearranging the displays in the preference window and lots of different resolution settings but with no difference.
An old MacBook connects fine so the monitor and hdmi port must be okay. I'm sure we have used the cable before but it could have been with the previous MacBook Air. The current one I'm using is a mid 2011 version running lion and is (according to software update) all up to date.
Any thoughts or help would be appreciated!

How can connect my Macbook Pro to a TV Monitor ?

How can i connect my MacBook Pro to a TV monitor other way than 15 pin cable ?

I would check out Monoprice. I bought this cable for my late 2011 MBP - it attaches to a Thunderbolt or Mini DisplayPort and then out to HDMI. It's just a small adapter - under $7 - and worked quite well for me. You'll have to get a HDMI cable of your desired length to work with it. I also suggest using Monoprice for HDMI cables - they've excellent quality and low prices.
Clinton

I want to connect my MacBook Pro (2009) with Apple TV

I want to connect my MacBook Pro (2009) with Apple TV
I updated my Mac to Mountain Lion OS X 10.8.2 (12C60)
I had tried connecting my Mac for many time but I could not.
iTunse is connected with Apple TV

Read this link. http://support.apple.com/kb/ht5404
2009 MBP is not supported for native AirPlay Mirroring. Sorry.
There are a couple of other pay-for apps that do this, but they're not as good... some people have had success.

Problems connecting my MacBook Pro to an external monitor

For the past 2 years, I have regularly connected my MacBook Pro to an external monitor (Dell SR2320L) using a VGA cable. When I do so, the picture automatically comes up in the maximum resolution of the external monitor (1920 x 1080). However, just in the past few weeks, the picture on my external monitor automatically comes up in 1600 x 1200 instead. When I click on the display menu in the upper right corner of my screen, there isn't even an option for 1920 x 1080 anymore. I've tried restarting my computer and even unplugging and replugging in the cable, but nothing seems to fix the problem. However, on at least some occasions, the problem seems to fix itself after about a day or so of use, and the picture reverts back to 1920 x 1080. I should note a couple of things: when I connect another MacBook to my monitor, the display automatically comes up in 1920 x 1080. And when I connect my Macbook to a different display, I have the same problem as I have with my display. So I think the issue is definitely with my computer, not my monitor. Does anyone have a suggestion about how to solve this problem? Or, when the problem arises, is there anything I can do to reset the display to 1920 x 1080 other than waiting for the problem to fix itself? Any suggestions woudl be greatly appreciated!

Hi bonfig,
If you are having issues with the external display settings on your MacBook Pro, it may be worth going throught the following article, in particular the portion about resetting the SMC and PRAM:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Cheers,
- Brenden

MacBook Pro to my external monitor

How do I hook up my MacBook Pro to my external monitor if I don't have an HDMI connection or a DVI connection port on my laptop?

Of course! some of the adapters can be purchased at best buy but are usually kind of expensive. I saw an HDMI adapter at Home Depot the other day for $7 which is a good deal.
Although, im not even sure if youre in the U.S., so this information be irrelevant to you anyway haha.

Can I install only Windows on my Macbook Pro 2009?

Hello All,
For reasons far outwith my control. i.e. I am in the middle of borneo, needing desperatly to get on a full windows machine... I need answers to the following?
I have full gen versions of Windows 7 and MS Office 2010. I want to run these on my 13" MacBook Pro 2009. I know, boot camp, VMware etc are all great. But i can't at this time get those working.
I think, the best option is to just buy a HDD, remove the old one, install fresh copy (of win) onto new HHD.
However, my question is - will this work?
Thanks
Craig

As TheSmokeMonster indicated, you'll need to use either virtualization or BootCamp. BootCamp prepares your system to allow Windows to be installable on it (it also provides the drives for some of the hardware which may not be found elsewhere). Virtualization runs in OS X, so that should be a non-issue. Keep in mind, all firmware updates are only via OS X, so you would not be able to update your firmware unless you have a functioning bootable external OS X volume.
BootCamp does basically give you a full Windows machine... it just allows dual booting between Windows and OS X.

10.8.2 Mac Pro 2009 4 Apple Monitors = doesn't keep the display order and configuration. Please Help me!!

Guys i have a Mac Pro 2009 with 4 monitors attached.
Since i upgrade to 10.8, then to 10.8.1 and now to 10.8.2 my Mac Pro every time it starts, cannot remember the order and appearance of my displays so ihave to reorder them every single time.
Can somebody tell me what to do???
Please help me either wise i ma going to burn it!

I have brand new 10.8.2 Mac Tower with two matching video cards ordered from Apple directly and have the same problem. It wont save the display settings and also cant seem to tell which video card is which either.
In addition, the screen display images if loaded from a personal folder, is also not remembered after startup.
Please advise us what to do, Apple!!!! This is urgent for me. I am proifessional user and this machine is for use on live projection shows. We put a ton of money into this machine and it can't even remeber the displays! Not very amusing.

MacBook Pro (2009) 4K / 1440p Monitor (Samsung u28d590d + Kogan)

Similar Messages

Maybe you are looking for