Macbook pro 2010 (mid) not working

Hey everyone,
My macbook pro 2010 mid does not turn on anymore because I spilled a drink all over the keyboard and I do not want to pay to repair it. In addition, it also had display problems as well like white and black screens. I tried using the "Power On" program for apple and it says that my laptop is not worth anything but I am able to recycle it for free... I was wondering if my macbook pro is still worth something since I have the battery and memory in it still

Looks like that the speaker may be blown.
Have you checked the Audio MIDI setup?
    Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.

Similar Messages

HT1338 My macbook pro(2010) is not reading the hard drive, but the hard drive works through the USB?

Hi everyone,
My Macbook pro(2010) is not reading the internal Hard Drive. At first I thought it to be a hard drive gone bad, so i bought a new hard drive. My macbook is still not reading the Hard Drive. I am able to use the original hard drive through a external(USB) connection. Also, when the macbook turns, there is a redelling sound. Can anyone offer me any suggestions to what the problem might be?

It sounds like the internal cable connecting the HDD to the logic board is improperly connected or faulty. An appointment at an Apple genius bar might be a good option. The repair should not be too expensive.
Ciao.

My macbook pro external speaker not working! help please

My macbook pro external speaker not working! help please

1. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
     Pllug in the speakers.
     Do they show up?
     Make sure that Mute is not enabled.
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
Best.

I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7). What is the problem?

I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7). What is the problem?

You haven't identified the version so I can't tell if offering you contact options for Adobe Support will be of use to you. But they will likely be your only hope of getting resolution unless you just happen to be using the wrong number as the serial number.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

My macbook pro retina is not working camera after updating Mountain lion.

My macbook pro retina is not working camera after updating Mountain lion.
I have also updated to latest update 10.8.1. Still its the same.

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

OS X 10.10 MacBook Pro 2010 Mid

Hi all,
I had a old MacBook Pro 2010 Mid, 6,2 model
It is Intel HD and Nvidia 330M, and it still using old OS X ML
I look on the forum here
GPU Panic - OSX 10.9 Mavericks - Macbook PRO 6,2
see the GPU have problems on Mavericks..
I am wonder, do anyone here using this MacBook Pro, with OS 10.10.1 also experience this problems?
OR on newer OS X 10.9.5 this is fixed?
I ask for that is because want to upgrade to latest OS X or so. But before install hope know any problems will meet.
Thank you.
Best Regards,
Jimmy Chan
http://explorerhome.no-ip.org/blog

Hi all,
I had a old MacBook Pro 2010 Mid, 6,2 model
It is Intel HD and Nvidia 330M, and it still using old OS X ML
I look on the forum here
GPU Panic - OSX 10.9 Mavericks - Macbook PRO 6,2
see the GPU have problems on Mavericks..
I am wonder, do anyone here using this MacBook Pro, with OS 10.10.1 also experience this problems?
OR on newer OS X 10.9.5 this is fixed?
I ask for that is because want to upgrade to latest OS X or so. But before install hope know any problems will meet.
Thank you.
Best Regards,
Jimmy Chan
http://explorerhome.no-ip.org/blog

MacBook Pro 2010 will not power up. Just clicks.

MacBook Pro 2010 will not power up. Just clicks.

Hi mzantop,
Thank you for using Apple Support Communities.
So you get no video or startup chimes but do hear clicks from your MacBook Pro.
Please check out this article for troubleshooting steps
If your Mac won't turn on - Apple Support
Hope it gets going.
Nubz

Macbook pros to TV not working

I've been connecting my two Macbook pros (2008 & 2011 both on OSX) to a Sony Bravia TV for ages using a HDMI cable connected to a HDMI adaptor to Minidisplay. For some reason now the connection doesn't work. I've tried both computers, different HDMI cables, different adaptors, different ports on the TV (and entertainment center), and nothing works. When connected directly to the TV the screen remains blank, the laptop will flicker when the cable is first connected but then nothing. The laptops don't recognize the second screen at all. I've tried resetting the PRAM, unplugging and plugging, turning everything off and on, and restarting the laptop. Nothing has worked so far.

If your Mac is capable, look in System Preferences > Sound > ouput tab and select the TV or hold the Option key down and click on the Volume icon on the menubar to accomplish the same.
Here are the models that pass sound over HDMI and those that don't.
These Apple computers supply multichannel audio (up to 8 channels) and video signals over Mini DisplayPort:
iMac (Late 2009) and later
Mac mini (Mid 2010) and later1
Mac Pro (Mid 2010)
MacBook (Mid 2010) and later
MacBook Pro (Mid 2010) and later
MacBook Pro (Retina, Mid 2012)1
MacBook Air (Late 2010) and later
1No additional adapter is necessary if you are connecting directly to the HDMI port on your Mac mini (Mid 2010) and later or your MacBook Pro (Retina, Mid 2012).
These Apple computers supply only video signals over Mini DisplayPort:
iMac (Early 2009) and (Mid 2009)
Mac Mini (Early 2009) and (Late 2009)
Mac Pro (Early 2009)
MacBook (Late 2009)
MacBook (13-inch Aluminum Late 2008)
MacBook Pro (late 2008), (Mid 2009), and (Early 2009)
In addition you need a MiniDisplay Port to HDMI adapter that passes audio like this:
http://store.apple.com/us/product/H1824ZM/A/Moshi_Mini_DisplayPort_to_HDMI_Adapt er

Macbook pro wifi internet not working

Hi Everybody,
I am recently getting a problem with Wifi. I am using Macbook Pro 13 mid 2010, upgraded from Mac os x lion with wifi patch update. It was working fine, but suddenly my internet stops working. Here is some solutions I already tried:
1. I already tried reseting safari
2. Prefrences file deleted from Library
3. Router has been factory restored, still problem persists.
And one more thing, I am successfuly able to connect the router, can even ping it, but If I try to surf with any browser or even ping any website, nothing works!
Please help me!

Try the following:
Open network preferences.
Select your WiFi card on the left.
Click "Advanced"
Click "Proxies" tab.
Enable "Automatic Proxy Configuration"
Close Network Preferences
Quit Safari.
Reboot your Mac and try again.

I cannot print wirelessly to an Epson 810 from a MacBook Pro (2010). Stopped working with version 4 and has not worked since. Prints fine to Safari, Chrome, and all other programs. Resetting didn't help.

Prints fine with other browsers and programs. Works with my wife's MacBook Pro.

Took it to Apple Genius, they told me it was my memory (incompatible)
Believe the first one. No one RAM test will reliably indicate RAM is bad. Once indicated, it has to be replaced.
You have to get RAM made for the mid 2012 13" MacBook Pro. Just because it says it 4GB of 1600MHz DDR3 memory does not mean it is compatible with your Mac. You have to buy RAM for Macs with lifetime warranty, that is not ValueRAM, and says the model and its time frame within the year that it was released, and its model number when buying RAM. Both http://www.macsales.com/ (OWC) and http://www.crucial.com/ sell RAM in that means of attributing what kind of RAM it is.
I ran an internet-based free diagnostic tool and it showed that my hard drive did have bad parts (corrupted? possible to fix or not?) and it was acting irregularly...
What tool? Some are known to damage software components of drives. Especially any that address system cache.

Macbook Pro intranet will not work on iPads

I'm trying to set up an intranet network hosted on my MacBook Pro running Mountain Lion 10.8.5. I have created a local web site hosted in the Apache server on the MBP, and I want 5 iPads to access it. Its event photos for sale. The problem is, the site shows up on the iPads ok, but when I tap a photo to enlarge it, it hesitates, then the browser crashes, every time, no matter what browser is used.
I'm using an Airport Extreme for the wifi. The problem occurs whether connected to the internet or not. I tried connecting the Airport to the MBP with an ethernet cable, and making a whole new intranet network on the Airport, and it still does the same thing, despite trying a lot of different configurations. So, I got a MAMP server, and it still did not help. I need it to work offline because the events I photograph rarely have internet access. I've tried using the peer-to-peer connection with the same result.
I have used the exact same system hosted on my iMac (identical operating system) with no problems.
I can't figure out what is wrong, any help would be appreciated!

Try
Intel-based Macs: Resetting the System Management Controller (SMC)
<http://support.apple.com/kb/HT3964>
It's important to know precisely what MBP you're dealing with. For instance, if it's a Mid-2010, 15in,
<http://support.apple.com/kb/TS4088>

Macbook Pro – Some Keys Not Working!

Hi
I'm running a 15-inch ( mid 2010 ) Macbook Pro with OS X 10.8.5.
Some of my keys have stopped working.
I've been throughout his forum but found nothing that helps.
The 't' key sometimes does nothing and sometimes this... IORTUY
other keys that dont work are: number 5, hypens, square brackets and volume up.
Random I know.
Anyone experienced this?
Thanks
B

I'm on a MacBookPro8,2,
Intel Core i7 2.3 GHz
Boot ROM Version: MBP81.0047.B27
SMC Version (system): 1.69f4
OS X 10.9.2 (13C64)
I have the same issue with some of my keys, it comes and goes, but it's mostly there.
I have to carry a small Bluetooth keyboard with me now, this really *****.
I'm paranoid thinking this might have something to do with a keylogger process, or maybe just some process in the system that keeps taking all the IO bandwidth for the keyboard, I don't think it's hardware related
I've installed an antivirus and performed an exhaustive scan and found nothing wrong.
When I started typing this post I had to go and get the external keyboard, now I'm typing back again with the keyboard, no clue what might be causing it.

HT6510 Airdrop between two Macbook Pro's is not working in Yosemite

Airdrop is not working between my Macbook Pro Late 2011 and my co-workers Macbook Pro Mid 2012 on Yosemite. We're on the same wireless network. It worked fine in Mavericks.

It's probably that UVerse modem/router you have. I say this because I've run into similar issues with Arris modem/wifi router boxes from Comcast for a few clients. They went out a bought an AirPrint capable printer and configured it on the network. They could print to it from their PCs just fine (IP based printing), but none of their iOS devices would see the printer as an AirPrint device, they couldn't see any printer on the network. The solution was to put their modem into bridge mode (while disabling the WIFI on it) and use a Netgear router behind it in normal fasion. AirPrint worked fine after that. After some further digging, I discovered that Arris has an issue with supporting some Multicase based protocols on their boxes.
My suggestion is to go try AirPrint on another WIFI network and see what happens. If it works, then you have your answer. Obviously, if the first one doesn't work, don't give up... you can't just say it's not the router beause you can't be sure what that other network has for WIFI. Just keep an open mind when testing this. Or you could go get yourself a router and set it up, but that of course would cost you money you may not want to spend until you're 100% sure that this is the case here.
After a simple search, I found this. http://forums.att.com/t5/Residential-Gateway/AirPrint-Function-Quit-After-Uverse -Install/td-p/2936993
Seems the gateway device that UVerse installs can have similar issues as I described above. At this point, I'd look at that device as your culprit for this. I can't think of anything else that could be causing this to not work.

2008 Macbook pro left click not working properly after upgrading to 10.6.8

I have a 2008 Macbook pro and a few months ago after upgrading to 10.6.8 my left click has been wonky.
Using the trackpad the left click eventually gets "stuck" or stops responding and I have to push it multiple times before it does anything. I have tried plugging in a mouse, but when I do so the mouse also behaves the same way. The only way I seem to be able to get the clicking to work properly is to restart the computer with the mouse attached.
I have seen threads about trackpads being messed up by swollen batteries, but my battery is brand new and looks fine, and the clicking problem extends to an external mouse, so I believe it is something with the preferences.
I tried deleting com.apple.driver.AppleBluetoothMultitouchTrackpad.plist and restarting and the problem seemed to be fixed, but then after about a half hour it returned.
Having to keep a mouse plugged into my macbook is driving me crazy, anyone know a solution?

I started having the same issue after update. I'm on a MacBookpro running 10.7.2
ICalled apple and they did a remove battery reboot, a reload lion and a option/command/R/P reboot on startup and then the computer started working. Two days later problem was back. I then did a reboot and the computer was back to working. Today the computer worked fine tell it went to sleep. I had to do a hard reboot to get the Mac up and running and now no left click. Please help. I can not use the Mac with the trackpad, a mouse, a Bluetooth mouse, or a digital pad. All so signs of left mouse click not working. One other item when you go to pick your user at startup the left mouse click works. Help!

My macbook pro charger is not working

Dear All,
My macbook pro (Retina, 13-inch, Late 2013) is not working, no light is appearing... What can i do now, Please any one help me.

Hello,
Please read this to troubleshoot your Mac or it's charger :
Apple Portables: Troubleshooting MagSafe adapters - Apple Support
If you are experiencing a hardware issue you better contact an apple store or get an appointment at the Apple Genius
Bar to get your Mac fixed
http://www.apple.com/retail/geniusbar/

Macbook pro 2010 (mid) not working

Similar Messages

Maybe you are looking for