Macbook Pro 2010 upgraded from Mavericks to Yosemite keeps shutting down on its own
I upgraded to OS X Yosemite about a month ago, I have a macbook pro 2010, and in the last two weeks it started shutting down on its own. At first when i'd wake it, the fan would come on loudly and then it would shut down. In the last couple of days, I would make sure all programs were shut when it wasn't in use and then put it to sleep but every time i'd return it would be shut down and need a hard restart. If i just pressed the on button lightly it wouldn't start. And when i turn it on the fan comes on immediately. I'm a publisher so I'm working in indesign and illustrator a lot but I keep a constant look out for my memory and this isn't the problem. I'm working to a deadline here and can't afford to lose my computer for 3 days in the mac store (I live in Barbados) to get it fixed. Any advise?
Thanks
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic report (with a name that begins with "Kernel" and ends in ".panic") under the heading System Diagnostic Reports on the left. If you don't see that heading, select
View ▹ Show Log List
from the menu bar. Post the entire contents of the report—the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post any other kind of diagnostic report, such as a hang report.
Similar Messages
-
Macbook Pro (13inch , Mid 2012 )
processor 2.5Ghz Intel core i5
memory 4Gb 1600Mhz DDR3
OS X Yosemite version 10.10.1See if Safari starts if you launch it while holding down the SHIFT key. If it does, it means you have some incompatible Safari extensions. While still launch via the SHIFT key method, go to Safari Preferences > Extensions tab and turn off all extensions. Then see if Safari opens normally and report what you found.
I have the same MBP as you. I upgraded to Yosemite last week and Safari works perfectly. I run no virus software or "cleaning/tuneup" utilities and have only one extension from a trusted source that keeps it updated.
You may have acquired a piece of malware from an unscrupulous download hosting site. If disabling extensions does not help, please use the instructions in this Apple article:
Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support -
After yesterday upgrading from Mavericks to Yosemite I can no longer find in Mail the icon (looks like the Add To Contacts icon without the + mark) I used to press in order to obtain an e-mail address from my contact list. What procedure should I use now in order to quickly add an address to an e-mail that I wish to send?
BobOn the right of the To: field you will see a circled plus sign:
Click it. -
Since upgrading from Mavericks to Yosemite Mail, Spotlight, Mission Control and App-Store don´t work correctly. Is it possible to return to Mavericks?
If you have an external drive with an OS X Time Machine backup, then do restore of your last backup. If you have an external drive with a bootable clone of your previous system, you can boot to that clone and re-clone the OS X on your external drive back to your Mac's internal drive.
If you do not have either of these available, then the reverting/restoring process becomes much more complicated and involves purchasing an external drive and backing up your current system to that drive, then erasing, reformatting your hard drive and now your only options to installng an OS X version is doing a clean install of OS X 10.6 Snow Leopard, then upgrading, again, to either OS X 10.7 Lion or 10.8 Mountain Lion. OS X 10.9 Mavericks is no longer available for download and Apple has not made OS X 10.9 Mavericks available in any other form to be able to redownload and install.
Maybe it would be better to explain in detail your issues with Yosemite to see if any of us here can help you with your difficulties.
I am not running or using Yosemite, so I cannot help you with your Yosemite issues,
There are others here who can help you with Yosemite.
Good Luck. -
I have just upgraded from MAVERICKS to YOSEMITE OS 10.10. I have 4GB of memory.
Since upgrading my ageing EPSON CX3600 will no longer print. I get the error message ;COMMUNICATION ERROR.
Apple support gave me advice which hasn't worked including deleting the printer via system preferences and rhen restoring it after rebooting the system
Any ideas please.Epson Stylus CX3600
Epson Stylus CX3600 : Drivers & Software
There is also a driver for it at
Gutenprint for Mac OS X -
Tiger install disk (10.4.6) MacBook Pro - possible upgrade from 10.3.9????
Can I use the Tiger install disk (10.4.6) that came with my MacBook Pro to upgrade from 10.3.9 on my Powerbook to 10.4.6 on my Powerbook?
You're welcome.
Leopard requirements/10.5.x...
* Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
* 512MB of memory (I say 2GB at least)
* DVD drive for installation
* 9GB of available disk space (I say 30GB at least)
You have to call Apple &likely ask for a Product Specialist to get it, if they still have it! -
I'm currently working in Myanmar and no chance to going into a Mac service provider or store. I was using my Macbook Pro (mid 2010) when beer was spilled onto the table. I lifted the computer instantly and as i did not see liquid on the machine and also it had a protective cover i was sure no liquid got in. I removed the cover and it was dry but then 5 minutes later it shut down on its own and it would not turn back on or charge. I left it for an hour or so and then it turned back on and was charging but then since i thought that may be it was because some liquid got in, I turned it off again immediately and disconnected from power source.
what is the best way to proceed knowing i won't be able to bring it in to a technician anytime soon?without on hand diagnostics, nobody can tell you the correct answer on that. No.
5 minutes later it shut down on its own and it would not turn back on or charge.
bad news
Liquid spills, why your MacBook chassis is a one-way valve for spills
After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
contact Apple for in shop diagnostics and cost estimation ....possible parts replacement. -
MacBook Pro won't boot and shut down on its own.
Hi, I am running a Macbook Pro. My problem is that the OS froze during use, and I could not move the cursor. As which point I force shut down by holding the powerswitch. From that point onwards I could not get the machine to boot, it keep getting stuck at the grey screen with Apple icon. After loading at the grey screen for 15-20 mins it shuts down on its own.
I've tried to reset SMC (shift-control-option + power button) and PRAM (Command-Option-P-R) but it dint work. Please help. Thanks.It appears your problem occured after you upgraded to 10.8.2, but if you did it right after the SSD and RAM switch then it's hard to tell exactly what is causing the issue.
I advise returning back to factory, hold command option r boot and wipe everything and reinstall 10.8
..Step by Step to fix your Mac
If the problem continues, then make a warranty/AppleCare call, hopefully you didn't strip the screw heads or leave any other tell tale damage inside.
If your fine on 10.8.2 for some time, then switch the RAM and do a hardware test extended or Rember or Memtest to make sure the new RAM is not the issue.
If that's fine then Carbon Copy Cloner to the external SSD and hold option key down to boot from it and test that.
Then do the internal SSD switch and test that.
Take your time, Mac's are so finicky and you can't just slap this or that and expect it all to immediatly work like it should. -
I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
Help.BB1B2,
The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
Sorry,
Clinton -
Can I insert a memory card into my Macbook Pro? I tried, and it does not go in on its own, I don't want to force it and get it stuck!! Help!
Maybe the wrong port or the wrong kind of memory card? You didn't say what version/year of Macbook Pro you have. Below is a photo of the newest one.
Red oval = USB port. It is to the left of the headphone jack.
Blue oval = SDXC card port. Is your card an SDXC card?
What are your options for transferring data to the picture frame? The manual should say. -
My MacBook Pro starts then shuts down on its own 4 seconds later. An idea on what I should do? Thanks!
Is the little LED on your adapter's MagSafe plug glowing when it's connected? What color?
It sounds as though your battery is drained and the adapter isn't charging it. Try resetting the SMC:
http://support.apple.com/kb/HT3964
That may start the battery charging again. -
Why is my new MacBook Pro taking so long to start and the shuts down as soon as it completely loads?
Why is my MacBook Pro taking so long to load and then shutting down?
Sorry no one answered. Do you still need assistance?
-
Mac Pro shut down on its own, then on boot up it beeped steadily for 2 min?
I put my 2009 Mac Pro to sleep then the next day I find it completely shut down! I boot it up and then I hear a steady beep (every second) for about 2 minutes. After 2 minutes the beeping went away.
Any idea what caused Mac Pro to shut down on its own? And what does the steady beeping mean? The beeping is coming from inside the Mac Pro's speakers, not from my BOSE 5 computer speakers.
I don't think there was a power outage as the UPS is fully charged, and I asked a neighbor across the street.I wasn't clear in my description, it's a steady continuous beep, it's a rhythmic beep -- it'll do this for 200 beeps or about 2-4 minutes.
-
HP officejet pro 8600 Plus shuts down on its own while making numerous copies.
My printer HP officejet Pro 8600 Plus keeps shutting down if I print or make more than 5 copies then gives me a message to avoid damage shut down the printer with the on button. Well it shuts down on its own.
Hello mb_bernhardt,
Welcome to the HP Support forums. I understand that your Officejet Pro 8600 Plus printer is giving you a Printer Failure message and then the printer shuts down.
I’ve included the A 'Printer Failure' Message That Might Include an '0x610000f6' or '0x61xxxxxx' Error Code Displays o... document. If the error message that you’ve received includes an Error code there is one set of instructions to follow, and if there is no Error code there is another set of instructions to follow.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
Has anyone been having problems with bluetooth in Macbook PRO after upgrading to Mavericks?
Hello,
Ever since I upgrade my 13inch (early 2011) Macbook PRO to OS X Mavericks I have been experiencing problems with bluetooth connectivity. Suddenly my Magic Mouse stops working and I cannot connect it back. Also I try turning off the bluetooth function but is not possible. The only workaround I have found is to restart the system.
I appreciate any help.Look in the More Like This box to the right of your post.
Maybe you are looking for
-
Hi, I just plugged my faithful HP1600 into my brand new Windows 8.1 laptop. The laptop thought about it for a minute or two and downloaded drivers. I printed off my first sheet without any problem. Went to print the next document and I keep getting
-
Quality of screen color flashes after connecting to external LCD monitor
After connecting my Powerbook G4 to an external LCD monitor via s-video, the quality of the image on the built-in screen flashes back and forth between what seems like a 8 or 16-bit image and a 32-bit image. I have run the hardware test and everythin
-
Last even I purchased the central form filler on a monthly payment basis. I was told by Phillip that I would be able to download and complete Doctor appointment forms. I have been unable to upload and complete the forms. The button for forms wil
-
Clean Job: Guided Procedures - Locked Objects & Background Action Process Q
I opened this thread also in Portal Content Development thread, but I think its more useful here: Hi Experts, We are running several Workflows on our Portal, they often lock objects and use the background action processor queue. You can unlock these
-
How to install free disc menu templates?
I'm a beginner in using my new iMac and Premiere Elements 10, so I have to ask - How to install the free disc menu templates from Muvipix? Are there any more disc menu templates in Preimiere Elements then the few ones I have there? gardie10