Macbook Pro 2010 with 2 accounts, one really slow.

HI everyone,
I seem to have an issue with my 2010 MacBook Pro 13". It's currently on the latest release of Mavericks. I have two user accounts, both admins. The original account is EXTREMELY SLOW or unresponsive. It shows a pixelated version of my previous desktop background which is odd. The other admin account was created at a later date and runs normally. User switching is less than enjoyable, too.
Any help would be appreciated
Thanks!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Similar Messages

My Macbook pro 2011 suddenly has a really slow bootup. What can I do?

My Macbook pro 2011 suddenly has a really slow bootup. What can I do? I did install a cannon printer upgrade and security upgrade. Not sure if it was something to do with that. Also I tried the disk utility repair and didn't improve anything. I also reset PRAM and SMC.

1. Try booting in e Verbose mode - press and hold [cmd] + [v] keys just right after the boot chord sounds till you get a black screen and white letters.
if there are some delays in the boot process - you should see where the system is stuck.
this mode is not permanent - the next [re-] boot will be normal.
2. repair permissions. disk utility does fine. Disk Warrior is better.
sometimes after half done updates (it may happen though should not) there are items that are "belonging to someone else"
3. try cache cleaner (or there are some other utilities as well - I just like SlCC more) http://www.northernsoftworks.com/snowleopardcachecleaner.html - it's shareware though the basic functionality is free for you to use.
Try caches -> deep cleaning (please read the developers site what it does) and select checkmark at all options - reply yes to the requests and after a reboot the next reboot should be as it is intended.
p.s be sure you do have backup

Trying to defrag my macbook pro(2010)with drive genius startup disc and the disc is stuck in my computer. How do I get it out??

Trying to defrag my macbook pro(2010)with drive genius startup disc and the disc is stuck in my computer. How do I get it out??

Try these options:
Credit Kappy.
Look at these discussions:
https://discussions.apple.com/message/6369213#6369213
https://discussions.apple.com/docs/DOC-4032
Ciao.
Message was edited by: OGELTHORPE

My Macbook Pro is downloading Mountain Lion really slow.

So, I have a MacBook Pro that's just one year old as of last month, and lately everything I download is taking way too long, (even for the super small apps). I still have over 250GB of storage left and all that's on my computer is basically all college work and maybe a few apps. My Mountain Lion update has been downloading for the last 6 hours and it still has 1GB of downloading left to do. Is there anyway to speed up my computer? I tried downloading a update to Adobe that was only 11MB and it said 13 minutes, which is kind of ridiculous. I have AT&T high speed WIFI, so I know it's not my internet.

More then likely its slow on the server side due to the high volume of downloads that are probably going on right now. It was that way on launch day for Lion as well for me.

Macbook Pro 13' (Late 2011) STILL really slow since updating to Mavericks

So I've seen a lot of discussions about the same issue and some have threads have been solved, yet others remain unknown. I have the same problem as others that stated they have experience something similar to my case. Just fyi though, that my computer was already really slow prior to upgrading to Mavericks (on Mountain Lion). That was when I decided to do a clean install of Mountain Lion and everything was snappier than ever. It wasn't long until Mavericks came out and I instantly did an upgrade but everything suddenly started slowing down again and it's getting worse. I hope someone can help me out here, thank you.
EtreCheck version: 1.9.12 (48)
Report generated July 27, 2014 at 12:39:20 AM EDT
Hardware Information:
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 12:18:52
Disk Information:
ST9500325ASG disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Kenichi Kasamatsu (disk0s2) / [Startup]: 499.25 GB (154 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS31N
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Configuration files:
/etc/hosts - Count: 70
Gatekeeper:
Anywhere
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.nero.HSMMonitor.plist Support
User Login Items:
iTunesHelper
Dropbox
UnlockID
Google Chrome
Android File Transfer Agent
Internet Plug-ins:
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
LogMeIn: Version: 1.0.935 - SDK 10.7 Support
o1dbrowserplugin: Version: 5.4.2.18903 Support
QuickTime Plugin: Version: 7.7.3
LogMeInSafari32: Version: 1.0.935 - SDK 10.7 Support
SharePointBrowserPlugin: Version: 14.0.0 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
JavaAppletPlugin: Version: Java 7 Update 65 Check version
Safari Extensions:
Open in Internet Explorer: Version: 1.0
Searchme: Version: 1.3
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Java Support
Time Machine:
Time Machine not configured!
Top Processes by CPU:
      16% WindowServer
      15% Google Chrome
      3% hidd
      1% fontd
      0% Dropbox
Top Processes by Memory:
160 MB Google Chrome
135 MB softwareupdated
98 MB Finder
74 MB mds_stores
74 MB WindowServer
Virtual Memory Information:
321 MB Free RAM
1.52 GB Active RAM
1.20 GB Inactive RAM
977 MB Wired RAM
2.54 GB Page-ins
0 B Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Use of discrete graphics causes hard crash - (MacBook Pro 2010 with ML 10.8.2/3)

I have a client with a Mid-2010 MacBook Pro. He was having crashes with Lion so I upgraded him to Mountain Lion 10.8.2. The crashes did not go away.
I troubleshooted and with the help of gfxCardStatus noticed that every time his machine went to use the discrete graphcis he got the gray hard crash screen and system had to restart. Back then I tried a beta of 10.8.3 and it didn't help.
I noticed that if I created another user account (profile) it would not crash when the discrete graphics card was called upon.
So, I re-installed the OS (to 10.8.2), created a new profile and manually migrated pictures, documents, keychain, mail, movies, music and re-installed the relevant Applications. Everything was working fine and my client went on a trip to Europe and soon the crashes began again. Then he upgraded to 10.8.3 and the crashes got even more frequent (it seems 10.8.3 puts more applications on the discrete graphics list so it switches even more).
I am wondering what could have caused the crashes to begin. It was before he upgraded to 10.8.3. Some application or something he was using must have changed a setting or corrupted something to cause the crashing to begin. I haven't done this yet, but I'm sure if I create another user account it won't crash on it.
Any ideas where to turn my attention to see what is causing the shift from his working user account to a crash-causing one?
He has iLife, Office 2011, Final Cut Pro X, iPhoto Library Manager, VLC, Audacity, DropBox, FileMaker Pro 11, Flip4Mac Player, Fuze, GotoAssist, Handbrake, Skype, iSkySoft DVD Creator, iSkySoft Video Convertor, Onyx and Skype.
I know there are *MANY* others having problems with the automatic graphics card switching and it seems some are having more problems when gfxCardStatus is installed?
- Elan

is this your MacBook:
TS4088- MacBook Pro (15-inch, Mid 2010): Intermittent black screen or loss of video
Take a copy of the article with you when you go for service. They need to run a SPECIAL diagnostic to decide whether you have this problem. Do not leave until they run the special diagnostic. The "overnight run" does not detect this problem.
If they confirm you have the problem, they will replace the graphics chip, which is part of the motherboard. be prepared to hand over your Mac for depot repair. (Your backups must be up-to-date).

My 2011 13'' MacBook Pro has started to run really slow.

I have a 2011 13" MacBook pro and this week it has started to run really slow. Specifically it takes about 3 to 4X longer to do just about every task. The only thing ive done recently was update from Lion 10.7.3 to 10.7.4 and a Safari update. Are there any suggestions on what I should do to fix it or on what could be the potential cause?

Things That Can Keep Your Computer From Slowing Down
If your computer seems to be running slower here are some things you can do:
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.
If nothing here seems to help, then reinstall Lion:
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Energy usage (watt) of MacBook Pro 2010 with 8GB Ram and i7

I think of buying a MacBook Pro with 8GB, i7
(and SSD, but that's not important because it consumes less than HDD)
What is the energy consumption (in Watt) in idle state with display on under
1) OSX
2) Win7 (I need this for my job)

Well, I need a computer professionally. At least now.
But I want to keep my environments impact at a minimum.
So I need precise data to evaluate what I do:
money is one thing, because it's usually very finite,
but even more important is recyclability, energy, ...:
10 Watts difference (e.g. for 8GB instead of 4GB?)
will yield, over mac lifetime of say 10 years (the laptop
im am currently typing on is 8+ years old, but is slowly
going towards being obsolete, even with ISA SSD upgrade):
10 h/d * 365 d/y * 10 W * 10 y = 365000 Wh = 365kWh.
I try to save energy, so this is approx my direct energy usage
of 1 year (I have no car, do not fly, have no refrigerator,
do not heat my appartement above 10 deg Celcius, ...
but strangely I have a computer and I am a programmer ...).
For me, it's important. It is relevant for my decisions:
5 Watts? I will be tempted by 8GB. 10 Watts? I don't know.
(I do setup work, so I use VMs a lot, so I need quite some
memory for that ...).

Is a MacBook Pro 2010 with 320 Gb big?

Please help, I'm looking for a MacBook Pro for less money than the newest version. I was just wondering if 320 Gb on a MacBook Pro was small, or large.
Thank you!

320 GB hard drive? Depends on what you will be using the machine for? Also, I suggest you check eBay or the Apple Store (store.apple.com) for deals on Refurb units. You can get a lot more for your money and the machines are in decent shape.

Macbook pro 2010 with 2 external monitors without its main display

Hi guys, I have been searching for a way to have 2 monitors without macbook's screen itself.
I'm aware of various adapters through usb and etc.
But Im thinking, if mac book is only capable of outputing 2 displays, why not outputing main display to one external monitor, instead of the screen on the computer, and the other external montior as a extra one?
Is it possible ? so basically 2 external monitor with macbooks screen switched off.
I don't think apple tv can mirror one and add extra one can it?
I just want 2 big monitors instead of 1 big monitor with 1 tiny screen of the laptop.

Maybe someone with a 2010 model will jump in and correct me, but as you only have a single Mini DsplayPort adapter, I don't think that it's possible to have two external models on a 2010 model. You can only do it on 2011+ via Thunderbolt using Thunderbolt Displays.
You might want to ask your question in the Apple Cinema Display forum, though. I'm just not aware that it can be done.
Clinton

Airport making MacBook Pro (15-inch, Early 2011) really slow on start up

The computer will start up well until It gets to the desktop once there it freezez for about 10 minutes but only if I have the airport on, I've tried booting it with the airport off and no problem at all. Is anyone haveing the same problem. i've tried a lot of thing and nothing seems to work. Any Advice?
thanks,
J.

In System preferences > Network > use the gear at the bottom of the list of Interfaces to "Set Service Order" Make sure Buetooth is far down the list.
If you are not using Bluetooth, turn it off.
Check [√] Ask to join new Networks:
Set the order of known Networks so that your available network is first or ONLY one on the list:
-OR- create a new "Location" from scratch that includes only your preferred Network.
Update to 10.9.3

Macbook Pro 2010 SSD Question

Hello,
I've been thinking off adding a little better speed to my macbook pro 2010. It's not slow as ive upped the 4gb memory to 8gb which has made a good difference however I still want to add a bit extra under the hood.
I have contemplated getting the new macbook pro but if the ssd speeds things up then I may as well get a 500gb SSD.
I heard that you cannot use a SATA III is this correct or can I use one of those in a macbook pro 2010?
your advice and help would be much appreciated
Thanks
Mark

the Samsung EVO says the following;
Interface: SATA 6Gb/s (compatible with SATA 3Gb/s and SATA 1.5Gb/s)
I'm guessing this means it should be okay?
Thanks
Mark

MAcBook Pro (2010) i7 17" Strange problem (filesystem crash)

About month ago I changed my 1 year old MBP 2009 to MacBook Pro 2010 17" i7 one. I moved SSD (Patriot KOI 256GB) and 8GB of RAM to new device. I have noticed strange problem - sometimes filesystem crashes. When application ask to reboot system (because of reboot or instalation) sometimes system refuse to start - it shows progress bar similar to the one shown when going back from deep sleep. Or I can hear bell (standard one) but after this system powers off. The only way to have system working back is to use Disc Warrior to repair it because Disk Utility from install DVD can't repair filesystem and suggest to reinstall it and take data from backup.
I have no such problems with previous device. It happens even on fresh system for example just after installing Norton Internet Security (when installer asked for permission to reboot). I have no sudden hangs, no other problems at all.
Any suggestions?
During month it happens about 10 times. I even prepared my rescue USB with installed system and Disk Warrior.
Hardware test goes without problems. SMART status of drive is ok.

You can ignore the advice of nearly all the long-time contributors to these Discussions and keep Norton utilities on your Mac, but I guarantee that every time you mention Norton anything in these forums, you will be advised to remove it completely. Perhaps it isn't responsible for your present problem, but I'm certainly not convinced of that, and because Norton software is a well-known cause of trouble in OS X, I suspect many other people reading this thread won't be convinced either.
When you reinstalled the OS on your new machine, did you do so from the DVDs that came with it? Did you completely erase the hard drive?

Frequent aero crashes in Windows 7 - Macbook Pro 2010

Hi all,
has anyone come across this issue?
I have had continuous Aero crashes in my Windows 7 x64 installation and the new Macbook Pro 2010 with nvidia 330m.
During window resizing, video playback, aero and the whole desktop window manager will frequently crash. I have reinstalled twice the operating system, installed alternate nvidia forceware drivers (from laptopvideo2go.com) with no success.
When such a crash occurs the following error message is recorded in the Windows Event Log, Application category: 'The Desktop Window manager has encountered a fatal error'.
Any feedback will be appreciated.
Thanks
Theo

I'm not quite sure what I'm supposed to paste over! Here's what happens to me. I've got 257.15 downloaded and extracted. Then I go here:
http://www.laptopvideo2go.com/enhancer
I select driver version 257.15, set it for performance, select a number of different options on the page, most of which mean nothing to me, and download a ile named nv4_disp.inf. The problem is that I can't "replace" that file because that file doesn't exist in the driver installation folder. There are a lot of inf files, but none of them have that name.
I've tried to install directly from the generated inf file by selecting update driver on the display adapter, then going manually to the inf file. It works up to the point where it shows me the 330M as compatible hardware, but when I try to install it, it says it encountered an error while attempting to install it, "The system cannot find the file specified."
So what's up with my inf file? I'm thinking I'm doing something wrong there.
One thing that may complicate this is that I uninstalled and deleted the Boot Camp driver while following another set of instructions on how to fix this issue. Do I need to reinstall that driver, by chance? Then upgrade from that?
Any tips on how to recover and get back working again (preferably with updated less crash prone drivers!) would be hugely appreciated. I do development on Windows 7 and have been having a LOT of crash issues related to this!

My Sandisk cruzer thumb drive 4.0GB (which is very old, roughly 10 years and I'm not sure about the model) reads "The disk you inserted was not readable by this computer" when inserted in my Macbook pro 2010. How do I get it to work?

My Macbook Pro 2010 with the latest OS does not open a particular Sandisk Cruzer 4.0GB (which is an old model, about 10 years) thumbdrive with the message "The disk you inserted was not readable by this computer". Will I be able to read it on my macbook?

Is it readable in a Windows computer? If not then you can try Disk Utility to repair the drive-- although that may be dangerous too.
I haven't had this problem so I out of safe ideas. There are ustilies out there. I used the seach term "repair flash drive Mac OS X" to locate some of these.
If the data is essential there are pay-for services to recover data looked the price was in the range $50 - $1000
All the best.

Macbook Pro 2010 with 2 accounts, one really slow.

Similar Messages

Maybe you are looking for