MacBook Pro 2011 - 15" Core i7 - SSD - Heating, Screen Flickering Issues

Hello,
I recently brought MacBook Pro 2011 15" Anti-glare High Resolution with Core i7 2.2 G Hz, SSD, 8GB of RAM. I installed Microsoft Office and Angry Birds at this time. I'm facing multiple issues with my first Mac. Is anyone facing these kinds of issues in new MacBook Pro 15" models?
Issue 1: Heating: Fan running on high speed even though room temp is below 60F. No major applications are running at that time expect Office 2011 and web surfing (NOT watching any video) and listening iTunes.
Issue 2: When I log-off from computer, the screen flickers and goes to lower resolution. Also the windows colors changed to different colors. After log-in, I went to System Preferences > Displays. The highest resolution is already selected (1680 x 1050) When I try to change to lower, it changes but still displays different window colors and changing suddenly.
Troubleshooting Steps:
1.) Shutdown and Disconnected Power Cable (at that time battery is at 65%)
2.) Reconnected Power Cable and Power On the system
3.) Display shows correctly.
Unable to Resolve:
1.) Still fan is running on higher speed at low temp (below 60F with no major application running)
2.) Sometimes Display is not showing properly. It shows different color shades.
I scheduled support call with Apple Support and let's see what Apple can do...

I brought my first MacBook Pro 2011 on Day 1, so I can't return it since it won't come under 14 day return policy. I'm taking my Mac to Apple Store to fix all these issues. AppleInsider is also confirmed Disaplay Flicker issue on some of the models that they tested.
*Apple Support KB:*
On High Fan Speed Issue: http://support.apple.com/kb/HT4543
On Display Flicker Issue (not at exactly pin-point this issue): http://support.apple.com/kb/HT1573
On Gray Progress Bar Issue: http://support.apple.com/kb/TS3148
*Other Tech Forums:*
On back-light keyboard: http://forums.macrumors.com/showthread.php?t=1112874

Similar Messages

  • Hello, I have a Macbook Pro 2011, and put an SSD on it. Yesterday i upgrade to Yosemite and sadly mi trim is not supported .... I really need (and demand) a solution to this, because like i see in the manual of the mac, Iam allowed to install a disk.

    Hello, I have a Macbook Pro 2011, and put an SSD on it. Yesterday i upgrade to Yosemite and sadly mi trim is not supported .... I really need (and demand) a solution to this, because like i see in the manual of the mac, Iam allowed to install a disk.

    Try a Safe Boot to clear the dyld_shared_cache (dynamic loader cache)
    SafeBoot  http://support.apple.com/kb/HT1564
    Safe Boot, which automatically rebuilds this cache (among other things).

  • SSD Upgraded MacBook Pro 2011 freezes, hangs, until SSD is no longer recognized

    Hello.
    Enough with the small talk. I have MacBook Pro 13" Late 2011 with Lion that I upgraded with a 128GB Vertex 4 SSD about 8 months ago. I moved the original HDD into the optical bay and slipped the Vertex 4 into its place. Everything was all good and well until about a month ago when my computer started freezing and hanging (I'm not exactly sure what the difference is or if they're interchangeable words). To be more descriptive, I would have some applications open and it would randomly freeze, leaving me with a rainbow wheel I could control. The computer would then be essentially unresponsive other than the ability to click between apps, but if I did it a couple times everything would become completely unresponsive and I would be left with the spinning pinwheel. At first I thought the computer would right itself, but it stayed like that for 30 minutes one time, with the fan ending up blowing as hard as it could and the temperature of the computer becoming quite warm. The only thing I would be able to do at that point was to hold the power button to force restart the computer. Then the whole process would happen again, once more than 10 times a day. It didn't seem like the hanging was due to intensive use of the computer; sometimes I would literally just have one window open browsing the interwebs and it would give up on me, and other times it wouldn't happen until I had a billion tabs open streaming tv shows on every single one.
    At its very worst, I had to hard reset the computer yet again, but when it booted up the SSD was no longer recognized. It was as if I unplugged and removed it so there was nothing in the primary bay and I just turned the computer on. So it booted to the that thing with the options: recover from time machine backup, reinstall Lion, get help online, or disk utility. However, the SSD does not appear in the disk utility, I can't reinstall Lion to it (because it's not an option), and I can't use the SSD as a startup disk (also because it's not an option). I was completely sure it was a faulty SSD so I sent it to OCZ, who then crushed my hopes and told me there was nothing wrong with the drive.
    My hunch after several hours of digging throgh other forums is that something is wrong with my logic board, but I'm obviously posting this because I don't have any confidence in my hunch and would rather have some feedback before I go splurging on a diagnosis or - oh no! - another logic board.
    Thanks in advance, maybe.

    As I mentioned I sent it back to them, and they replied with this:
    "I would like to inform you that the RMA drive you sent back to us is no trouble found. Hence we will ship the same unit back to you. 
    Below is all the actions were performed on your drive.
    •        Writes every block on the drive many times.
    •        Verifies all data written.
    •        Reads every block on the drive many times.
    •        Tracks performance during this test, and makes sure it is within expected ranges.
    •        Tracks SMART data throughout this process to ensure proper functionality and recording of info."
    Then in a later email:
    "We thoroughly tested the drive on several machines. The drive has passed all testing with no faults found. The drive is functioning correctly as received. "
    I am actually praying that its my SSD or a broken SATA cable (no chance) because those are relatively cheap.
    Any ideas?

  • Macsafe 85w still not enough when running Heavy program on Macbook pro 2011 Quad Core

    Is there any official announcement from apple on how macsafe 85w works & design flow or diagram..??
    We know the magsafe 85w is not enough to run macbook pro quad core i7 and their family.. But there must be some reason why apple only allow maximum 85w only.. rite
    I run this multiple test on my Macbook Pro early 2011, 17" 2.2 Quad core i7, 8G ram, to proving that the 85W is not enough.
    -Im running this test on both OSX & win 7
    -the battery capacity is 20% when i running this test
    -the power adapter "macsafe" is plugin when i run this test
    1) macsafe 85w turn to green to stop charging when rendering HD movie in Final Cut pro 7 in OSX ( but then it will turn to orange to charged again after you cancel the render)
    2) macsafe 85w turn to green to stop charging when playing high graphic game such "Razor F1 2010" in Win 7 ( but then it will turn to orange to charged again after you quit the game)
    3) macsafe 85w turn to green to stop charging when editing AVCHD on Sony vegas Pro 10 in Win 7 (it will turn to orange to charged again after you quit the program)
    4) when the baterry reach 100%. then I run all of 3 heavy program above.. the baterry will drain slowly until 93% then it turn to orange to charging again.
    (this will happen only when you run heavy program) 85w macsafe itself also not enough to run these program.. still need little battery support..
    As i know this will happen to all macbook pro since before Quad core model. You must run heavy program, then you can determin this systoms..
    Lastly, I really hope that all of this symtoms are the "macsafe work design", & not the macsafe fault... & really hope this symtoms will not damage the battery because regullaly charge on & off.
    Maybe This is why new macbook pro design,, you cannot take out the battery... It still need the battery support also, while plugin..
    Thanks &
    Sorry broken english..

    "Maybe This is why new macbook pro design,, you cannot take out the battery... It still need the battery support also, while plugin.."
    Yes — but only when you're working the machine very hard. Most of the time, 85W is ample.
    "But,, we need the official announce by apple regarding this issue"
    No you don't. That's how it works. What good would an announcement from Apple do you?

  • MacBook Pro 2011 / HDD replace with SSD - power issue

    I recently replaced on a MBP 2011 2.5 core5 the 500 MB HDD with a Samsung 850Pro SSD. All went well with regards to cloning throught the apple disk utility.
    But i noticed the MBP seems to "burn" more power, meaning the battery life is reduced. It is not clear to me why replace the HDD by the SSD means a shorter battery life. Is there a compability issue with the  http://www.samsung.com/us/computer/memory-storage/MZ-7KE1T0BW ?
    Any suggestions ?

    Sorry, but you typed, "My 2014 model macbook pro 's logic board got damaged."
    Apple does not accept trade-ins. You can try selling it on eBay or Craigslist or sell it for cash to companies like Gazelle.com. Then buy a newer model with the proceeds plus added cash, if required.

  • HT3131 Will running the Macbook Pro 2011 in clamshell mode affect heat dissipation at all?

    I'm worried about the heat not being able to escape when the laptop is closed.

    I have used my new mid-2012 MBP in clamshell mode and monitored the temperatures and they were no different than when the lid was open, so it appears that the cooling system is unaffected. Very little heat dissipates upwards through the keyboard/upper case anyway, the heat is directed through the rear and underside of the case.

  • Need help with Preview app on MacBook pro 2011 / Lion.  Strange lockup followed by compounding issues

    Began by not being able to close files when opened in preview. Only way to escape... Force quit of preview program.
    Found help here. Tried multiple fixes - still acting very strange

    OK - I kept on trying and reading everything I could find on the issue.  Finally success!
    moved to the trash -
    ALL  com.apple.preview *.* files in the Library directory
    moved to the trash -
    the directory for com.apple.preview inside the Containers directory
    verified at library the permissions (cmd I) set to read/write
    restarted.....
    all trashed files rebuilt
    all functionality of preview is back!!!
    Hope this helps anyone else who is having trouble with preview!!

  • Macbook Pro 2011 SATA III support

    I would like to know if the new Macbook Pro 2011 supports SATA III SSD's. I know the thunderbolt needs the Sandy Bridge to work, however I am not sure if that means that the chip will definitely support a SATA III SSD. Does anyone know ????

    Eww,
    Thank you very much or your response. I have a clarifying question. I am looking at buy a OCZ VERTEX 3 SATA III 2.5" SSD and I just want to be sure that if I spend the money on it I am going to get 100% functionality to include the 6/Gbps, minus of course the TRIM feature because from what I understand Apple locked it out. Do you know if this drive will work on the 2011 MacBook Pro.

  • Do the 2011 Macbook Pros with an Apple installed SSD have cooling fans?

    Do the 2011 Macbook Pros with an Apple installed SSD have cooling fans? In other words, I pre ordered the 256 SSD option with my purchase from Apple. I have searched and searched the internet for a clear answer. I have called Apple and have gotten contradictory answers. Can anyone definitively answer this question?

    It's unbelievable that anyone purporting to represent Apple could have misinformed you in such a ridiculous way. Apple has never produced a MBP that didn't have one or more cooling fans in it. The percentage of total heat generated by a MBP that comes from its hard drive (or SSD) is tiny — I would guess it's considerably less than 5%. The notion that the machine could dispense with cooling fans as a result of switching from a conventional drive to a SSD is laughable.
    I can only assume that you posed the question in such a way that it was not clearly understood by the people responding.
    Message was edited by: eww

  • I got a macbook pro 13 inch core i5  late 2011 , it came with osx lion  and i been using facebook videocalls normaly , now i updated to Mountain lion but when i use facebook video calls in (safari ,chrome ) i see the window box but i only see my self  i c

    i got a macbook pro 13 inch core i5  late 2011 , it came with osx lion  and i been using facebook videocalls normaly , now i updated to Mountain lion
    but when i use facebook video calls in (safari ,chrome ) i see the window box but i only see my self  i can hear my friends but cant see em, they also can see me and hear me but i just see me and hear them .
    any ideas ?

    Your wifi problem sounds very much like the problem I had. The wifi would drop out, the icon showed it was still connected. If I turned it off, I couldn't turn it back on. Another user here pointed me to the problem, which was the wifi cable (the flat cable goint from the card to the motherboard). I found it on ebay for $13 and it's been running fine since I replaced it. This is the repair guide for your machine. The part number will be on there if you click the link.
    http://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Late+2011+AirPort-Blueto oth+Cable+Replacement/7510

  • My husband has a macbook pro (2011) and I have an iMac (intel core 2 duo) one apple id and cannot use facetime between us.  I also have an iPhone 4

    My husband has a macbook pro (2011) and I have an iMac (intel core 2 duo) and an iPhone 4 and iPad 2 but we share one apple id and are unable to use facetime with each other....help

    You will have to make a second Apple ID.

  • Can i use hdd + SSD in my macbook pro 2011 ?

    can i use hdd + SSD in my macbook pro 2011 ?
    cause i already had 750GB and now i am palnnin gto buy SSD to install my system on it and keep the 750Gb as a storge can i ?

    Go see Bmer here
    http://macosg.com/
    He's knowledgable about exactly what your wanting to do.
    Some drawbacks, you can't boot from any OS (OS X or Windows) installer disk from a external optical drive the Superdrive goes into when you install the kit.

  • Macbook Pro (2011 Model) suddenly does not boot from SSD in main bay

    I have been using Macbook pro 2011 and Samsung SSD (256GB) for about a year.
    All of sudden, the computer will not from SSD from the main bay, but it will boot from the optical bay.
    I have tried an Intel SSD 120gb which came with the computer, but it does not work either.
    However, it will boot from the regualr hard drive from the main bay.
    I have read somewhere that it could be due to the hard drive flex cable.
    Has anyone experienced a similar problem?

    It may very well be a problem with the SATA cable... for some reason (and I don't know why, but...) SSDs seem more prone in 'detecting' a faulty SATA cable than a standard hard drive. Where a hard drive will boot, an SSD will not.
    I would advise purchasing a new SATA cable - from ifixit.com or powerbookmedic.com - and replacing the cable. That (normally) clears up the problem.
    Clinton

  • Crysis 2 on MacBook Pro 2011 13,3" core i7?

    Can i run Crysis 2 on my Macbook Pro in high definition? How many fps? I have a 2,7 ghz core i7 2011 Macbook Pro 2011.
    Can I change the Intel 3000 HD? Can i Install the amd radeon hd 6000?
    Thanks in advance!!

    No, sadly it is not practical or possible to install a replacment gpu in a macbook pro.  If you really need to play games, than you should purchace an imac or a 15" macbook pro with the upgraded gpu.

  • SSD Install Experiences MacBook Pro 2011 i7

    This is a report on the beastie that I installed in my MacBook Pro 2011:
    http://thranblog.info/post/8615912997/ssd-install-experiences-macbook-pro-2011-i 7

    The fan normally runs at about 2000rpms - if they're loud enough to actually hear, you might have a problem. Mine can rev up to about 4000rpms sometimes and I'll hear them then, but it's nothing consistent.
    To see how fast your fans are running, download the free iStat Pro widget. If they're running abnormally fast, you could try a SMC reset to see if that will help.
    I would also uninstall VirusBarrier - your really don't need av software on a Mac but if you feel as if you must have something, try the free ClamXav and/or Sophos for Mac (both recommended by our resident malware/virus guru, Thomas Reed).
    Good luck,
    Clinton

Maybe you are looking for

  • How to change the port no in weblogic 10.3 server.

    Hi, Could you please tell me the steps,how to change my bea10.3 port no from 7001 to 7002? Thanks Advance.

  • Media encoder status error CS4

    I cant get my CS4 projects to encode! Media encoder gives me a status error. (yellow triangle in the status column) When I open the text file I get: - Source File: C:\Users\Andrew\AppData\Local\Temp\denis final CS4_1.prproj - Output File: E:\Sequence

  • How to sum different column in the same table

    Hi everyone I would like to know how can I make the sum of different column in the same table using apex exple: TR_PROJ_BIL_TRIM.ENTPIDFISC as ENTPIDFISC,     TR_PROJ_BIL_TRIM.EXEANNEE as EXEANNEE,     TR_PROJ_BIL_TRIM.PROJBILTRIMT1PREV as PROJBILTRI

  • Solution Manager gudie

    Hi We are planning to implement ERP 2005 with the useage types ECC 6.0, EP 7.0, BI and Solution Manager. I am totally new to Solution Manager. Can anyone explain me the purpose of Solution Manager and also if you have any documents regarding Sol. Man

  • Any support to create XML files?

    Hello, I was looking for functionality and support that OWB 10gR2 might offer in order to create XML files, containing relational data w.r.t a given definition. I did only find the packages that allow manipulation of XML data in tables and those two