MacBook Pro 2011 Djing App
Is there a DJing App for Macbook pro 2011 15" 2.2Ghz?
check out Virtual DJ Home and Mixx. both free in the app store. They are more complex than DJay
Similar Messages
-
Hello
I have a macbook pro 2011 13" that came with OS Lion (integrated not on a disk). I recently bought OS Mountain Lion of the app store and it is working fine. However I was a bit dissapointed in the battery so I decided to try and downgrade and completely failed, I froze the computer and when I restarted it it did not work. I went into recovery system and erased my disk and all that and went to re-download my OS. I was expecting to get the option to re-download Lion but instead I could only re-download Mountain Lion.
My question is since my computer originally came with Lion can I reset my computer so I get OS Lion back instead of OS Mountain Lion?
Thanks for any help. Any answer will be appreciated even if it is saying it is not possible.Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Kappy, a pretty wonderful and very knowledgeable man, has tip for that which I have copied and pasted above -
Macbook Pro 2011 running very slowly after upgrading to Mavericks
I am in deep trouble with my wife so any help would be gratefully accepted.
Shortly after Mavericks became available I upgraded my wife's Macbook Pro 2011 to use the new OS version. Ever since then, the Macbook has been running noticeably slowly. In particular, Mail is almost unusuable taking minutes to open and showing long delays while moving around messages, folders, etc. Excel and Word are also much slower, Safari is slow, in fact just about everything is grinding.
Any ideas on what can I can do to improve things and apease my unhappy wife would be much appreciated.
I have attached the Etrecheck output FYI
Thanks
Andrew
Hardware Information:
MacBook Pro (13-inch, Late 2011)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 0:5:25
Disk Information:
Hitachi HTS545050B9A302 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (361.28 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist 3rd-Party support link
Launch Agents:
User Launch Agents:
[loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
Dropbox
Internet Plug-ins:
LogMeInSafari64: Version: 1.0.730 3rd-Party support link
Google Earth Web Plug-in: Version: 6.0 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.3.6 3rd-Party support link
Silverlight: Version: 4.0.50401.0 3rd-Party support link
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
LogMeIn: Version: 1.0.730 3rd-Party support link
Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
LogMeInSafari32: Version: 1.0.730 3rd-Party support link
iPhotoPhotocast: Version: 7.0
JavaAppletPlugin: Version: 14.8.0 - SDK 10.9 Outdated! Update
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Bad Fonts:
None
Old Applications:
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
SuperDuper!: Version: 2.7.1 - SDK 10.4 3rd-Party support link
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Time Machine:
Time Machine not configured!
Top Processes by CPU:
7% Safari
6% Dropbox
5% WindowServer
3% hidd
2% com.apple.WebKit.Networking
Top Processes by Memory:
119 MB com.apple.IconServicesAgent
106 MB Safari
94 MB Finder
94 MB Dropbox
94 MB Mail
Virtual Memory Information:
1.26 GB Free RAM
1.44 GB Active RAM
311 MB Inactive RAM
1014 MB Wired RAM
251 MB Page-ins
0 B Page-outsLaunch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
I am going to NYC in a week and I'm wondering if there is a store where I can buy a new trackpad for my Macbook Pro 2011 unibody. I would also like to buy the tools i need to replace it myself. I can't find anything when I search the interwebz.
The problem is that when the machine is closed, it goes to sleep, and in sleep mode, all that goes on is that a bare trickle of power is used to keep the contents of RAM alive. Networking is definitely not active while asleep.
Now, regarding ds store's solution, that's a fairly bad idea. If the machine is just sitting at your desk, you don't need to close it, or if you feel a need to close it you can use Kappy's solution. (Although, it should be noted that apps like InsomniaX and Caffeine do not, as far as I know, keep a machine awake when the lid is shut.) If you're worried about passersby seeing your screen, just activate the screen saver instead. You could even require a password to dismiss the screen saver for added security.
On the other hand, if the machine is being transported, keeping the lid open and the machine running is not a good idea. The sudden motion sensor ought to protect your hard drive against damage caused by moving the machine around... if it's working properly, and I'd rather not depend on an "if" to prevent hardware damage to the machine. Plus, if it's in a bag and you've forced it to stay running, it could overheat due to lack of ventillation.
So, long story short: if you're transporting it, close it and deal with logging back in to the network, and if it's on your desk, don't bother closing it. -
Can i run adobe design premium 4 in macbook pro 2011?
I just bought a macbook pro 2011 2.2 GHz, quad core i7 to work with my adobe design premium 4. I heard many software like final cut studio and adobe creative 5 are are not working well with mac os lion. I got really worry and want to return the macbook pro. But before returning the macbook pro, i need to hear from you. I google and many people had no problem running adobe cs3 and cs4 with mac os lion. I need your help!
Both Adobe software titles you reference are incorrect. Do you mean Adobe InDesgn 4? if so that has problems running in Lion. I don't know where you get your information about Final Cut pro from. You can always check that forum here:
https://discussions.apple.com/community/professional_applications/final_cut_pro_ x
In any case this web link may be of some help:
http://roaringapps.com/apps:table -
How do I permanently erase my entire MacBook Pro 2011?
I am giving my Mac to somebody and don't want any recoverable traces of me to be on my computer. It's a MacBook Pro 2011 13" but it has Yosemite 10.10.1
Before Selling or Giving Away Your Pre-Lion Mac
Deauthorize your computer from iTunes, if applicable.
Back up your data using Time Machine or other backup methods for OS X Mavericks or Mountain Lion.
If you use Find My Mac or other iCloud features on this Mac, complete these steps:
Back up your iCloud content.
Choose Apple Menu () > System Preferences, then click iCloud.
Deselect the Find My Mac checkbox.
Sign out of iCloud. When you sign out of iCloud, you're asked whether you want to remove iCloud data from your Mac. Removing iCloud data in this way makes sure that the data isn't also removed from any of your other devices that are using the same iCloud account.
If you're using OS X Mountain Lion v10.8 or later, sign out of iMessage:
In the Messages app, choose Preferences > Accounts
Select your iMessage account, then click Sign Out.
5. Follow these steps for installing the original version of OS that came with the computer.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After Disk Utility loads select the hard drive entry from the left side list (mfgr.'s ID and
drive size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. If you are planning to sell or give your computer away, then do the following:
After you reformat your hard drive and reinstall OS X, the computer restarts to a
Welcome screen and asks you to choose a country or region. If you want to leave
the Mac in an out-of-box state, don't continue with the setup of your system. Instead,
press Command-Q to shut down the Mac. When the new owner turns on the Mac,
the Setup Assistant will guide them through the setup process.
Note: Portions of the above have been copied from What to do before selling or giving away your Mac - Apple Support. -
Macbook Pro 2011 not printing on network with canon pixma iP4500
Hi
I am not able to print satisfactorily from my 15" MacBook Pro 2011 to my QNAP TS439 server that has my Pixma iP4500 installed. I contacted apple support and after 45 minutes the operative gave up and said it was a QNAP problem. I am fairly sure it is not, so please read on...
Here is what happens. I ( myself and Apple) select the correct printer from the menu on my MacBook Pro with the correct path and printer on the server using Snow Leopard 10.6.8. As soon as I go to print something it says it is waiting for 10 seconds, very quickly it gets extended out past 30 seconds, but never prints.
I have tried another driver called the Canon Pixma iP4500 Gutenprint v 5.2.3. This will only print in black text. If I try to print colours, I get a very wishy washy pastel effect that just about shows that there might be some colours there. This is hopeless and most unsatisfactory.
In my opinion, this points the finger at Canon's printer driver that has been supplied to Apple, because the printer driver for Windows 7 works perfectly from the Windows 7 x64 PC.
Does anyone have a solution to this?Just a quick reply for others in case it helps....
First you have to install the Canon drivers for Yosemite from Canon Printer Drivers v3.1 for OS X.
Then since I had reset my Canon MP620 network settings, I had to start from scratch. I connected the printer to my new computer (with Yosemite) via USB and then launched the Canon IJ Network Tool.app (downloaded from the Canon web site) and it found the printer. However it hung on the last step "Searching for printers via access point...". At that point (after waiting a minute for it to give up), I had to read the IP from the Canon printer and enter it by hand in the Network Tool dialog.
I then unplugged the USB cable, and went to the Printers and Scanners system preference panel. After a few minutes, the printer showed up and I was able to set it up.
I then tried to set up the printer on a 2nd computer, running Mavericks. The Canon printer would not show up in the Printers and Scanners system preference panel, but after I launched Canon IJ Network Tool.app on that computer, the printer did show up and I could set it up there as well. This is all much more convenient than using a USB cable and sharing the printer, but, dang, is it complicated! -
FaceTime help MacBook Pro 2011
Hello! I need help with my MacBook Pro 2011. I really would like to FaceTime my friends, but it does not let me. I am running Snow Leopard OS X 10.6.8. Do I need to get Lion? When I try to FaceTime someone, it goes through and says connecting, but then it randomly ends. I am so confused!
Check for updates to FaceTime in the Mac App Store.
Also, with FaceTime running, in the menu bar at the top of the screen, go to FaceTime > About FaceTime. What version? -
I just bought my cintiq 12wx and was wonderding if i can connect it to my macbook pro 2011 through the thurderbolt using a mini displayport to vga adaptor? Please help!
Yes, it should work with a mini-displayport to VGA adapter. Since a 12wx also can take DVI you could use a mini-displayport to DVI adapter instead. Why go analog when you can keep it in digital!
I guess the usb is for the pen. -
As the topic says,
What cable do I need to buy to connect my Macbook Pro (2011) to a VGA screen? I tried the "Mini DisplayPort to VGA", but apparently it doesnt fit the 2011 Pro version...
Help me out please.Yes ... minidisplay
But what I do not like in that picture (my personal view, others may think differently), is that there is much plastic around the connectors where the cable must fit. You may ot may not be able to get the cable to *fully seat* with the adapter.
Other adapters (http://www.microcenter.com/single_product_results.phtml?product_id=0334087, yes I know this is a DVI) hve no plastic barriers to connections. -
Macbook Pro 2011 charging behaving weird. Charges and stops repeatedly and takes very long. Help?
So a few weeks ago my MacBook Pro 2011 started having charging problems. I would use it normally. Then plug it in to charge anywhere between 5-20 percent like I've been doing for the past year that I've had it (since August 2011). Anyway, what happens now is that it charges but extremely slowly - at least 4 hours to fully charge as opposed to the 1 1/2 to 2 hours that it used to take. Also, it seems to be draining a lot quicker than it used to while only browsing the internet. Furthermore, while charging, the battery meter goes from the percent its charged to to "not charging" back and forth. What's going on? Is there a problem with my battery, my computer, or the magsafe charger? [please refer to the pictures below to get a better understanding of my problem - these pictures were taken over a 2 hour time period - a time period that usually is enough to charge my computer] - if you'll notice, in the first two pictures, the percent barely went up by 10 in a half hour period:
Here are my Mac power stats:
Battery Information:
Model Information:
Serial Number:-----------
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 406
Hardware Revision: 2
Cell Revision: 158
Charge Information:
Charge Remaining (mAh): 6156
Fully Charged: Yes
Charging: No
Full Charge Capacity (mAh): 6393
Health Information:
Cycle Count: 343
Condition: Normal
Battery Installed: Yes
Amperage (mA): -1607
Voltage (mV): 12182
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 25
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 15
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
PrioritizeNetworkReachabilityOverSleep: 0
RestartAfterKernelPanic: 157680000
Standby Delay: 4200
Standby Enabled: 0
Battery Power:
System Sleep Timer (Minutes): 20
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 15
Wake on AC Change: No
Wake on Clamshell Open: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
Reduce Brightness: Yes
RestartAfterKernelPanic: 157680000
Standby Delay: 4200
Standby Enabled: 0
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: No
Charging: No
Does anyone have any idea what the problem may be?
Thank you,
macstrtry doing a SMC RESET and see if that sorts it out for you.
if doesn't work - better take it to Apple and have them look at it before something else goes wrong...
good luck - hope you get it sorted out.. -
I have and Macbook pro 2011 february. I have installed Lion with the lastest update. I would like to use my thunderbold display as my primary display. The same way when I close my MB Pro 2011, but I wish to use my Macbook pro display as my secondary display.
thanksIf your Mac has got Mini DisplayPort, purchase a Mini DisplayPort to HDMI adapter and a HDMI cable. You won't have to change any setting, and image will show on your TV after connecting it to your MacBook Pro. See > http://support.apple.com/kb/HT4241?viewlocale=en_US&locale=en_US
-
How to reformat a Macbook pro 2011 hard drive?
Hello,
How do you reformat a MacBook Pro (OS X 10.7.3) 2011s Hard drive? I already backed up all the files I wanted to save. But since I have the new Macbook pro 2011 (only a few months since I got it) it didn't come with an installation disc, but instead already came with all the applications. I'm wondering how to reformat the hard drive so it wipes out everything and I can start fresh and what would happen to all the applications?Well Lion has a Lion Recovery Partition on the drive you can access by holding command r and booting, there you can erase the Lion OS X partition completely (all files and programs) and reinstall Lion or simply reinstall Lion if there is a issue with it (no programs or files are touched in this second procedure)
Lion is downloaded from apple's servers, you need AppleID and a fast reliable internet connection with no bandwidth caps limiting you.
https://support.apple.com/kb/HT4718
If you want to replace the drive, there is software called Carbon Copy Cloner than can clone both the Lion OS X Partition and the Lion Recovery Partition to a external drive intact (excpet what's in the Trash, no Filevualt, no bootcamp, use free Winclone for that)
Hold the option key and you can boot from the external drive and format and clone everything to the new internal drive. TimeMachine of 10.7.2 and later can be booted from it's Lion Recovery Parttion as well just to restore only, cloning is better process because it gives full access to everything like before on the internal drive.
http://www.bombich.com/index.html
Some newer Mac's have Lion Internet recovery built in where the firmware will install the Lion Recovery/OS back onto a completely blank/new hard drive. -
Windows xp on macbook pro 2011 paralles on the monitor does not work
windows xp on macbook pro 2011 with paralles desktop 6 monitor is working to evil;
windows 7 with bootcamp work but I activate the software does not start on reboot, I apologize for the translation, thanksPost in your native language. There are excellent translators.
-
I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable. I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?
Download the supplemental fix to 10.7.5
http://support.apple.com/kb/DL1599
Maybe you are looking for
-
My phone wont let me send a text
okay so i have been texting someone this weekend and i wanted to tell them goodnight right, so i sent the message and it said message not sent review and try again. i tried to sent it again and again and i tried about 20 times to resend it. where i h
-
I received an email from Apple about fifteen minutes ago saying that "per your request" I had downgraded to a free account for iCloud. But I had made no such request! In fact, I had expected Apple to charge me $20.00 for a full 15 GB of storage. A
-
Why are some of the Internet Radio category lists empty?
For example, there are no stations listed under Country. This worked the last time I tried it several days ago.
-
Question about functional of a FI/CO infoCube
Hi all, I'm a new BW consultant. I've an assignment that investigating about functionals of 0FIGL_C01 and 0SD_C03 infocubes and their queries. Does anyone know something about that? please help me Regards, Chuong Hoang
-
How I can call Store procedure by TABLENAME.FIELD_VALUE ?
Hello, I have one table called store_proc_list. In the table there are two fields ie ID, SP_NAME. In SP_NAME I have set the store procedure name. Now, What I wanted to do is . I am writting one store procedure and in that and I want to execute the an