Macbook Pro 2011 don't recognize Monitor AOC e224eFw, hence not displaying correct resolution

Two days ago after i put my Macbook Pro 2011 to sleep with the Mini DisplayPort connected (always do the same) stopped identifying my External Monitor, AOC e224eFw showing it as "standard VGA" so i have no the right screen resolutions. I've tried to PRAM reset, SMC reset and not working.
Must say worked 2 days ago. Tried my old trusty Macbook Black 1st Gen and it's working OK with that one.
Any idea why?
Any help will be highly appretiate.
Regards!

I made a mistake, Monitor Model is e2243Fw.
Regards!

Similar Messages

Windows xp on macbook pro 2011 paralles on the monitor does not work

windows xp on macbook pro 2011 with paralles desktop 6 monitor is working to evil;
windows 7 with bootcamp work but I activate the software does not start on reboot, I apologize for the translation, thanks

Post in your native language. There are excellent translators.

External Monitor not displaying correct resolution.

I just hooked up my Viewsonic 19" widescreen display (1440x900) to my MacBook Pro. Ive closed the lid of my laptop and set the resolution to 1440x900 (60hz) in System Preferences yet the external display is still fuzzy. I looked in the monitors menus and it says its currently displaying 1152x864!!!!
When i tried mirror mode it looks like it thinks the external monitor is a different size but both screens have the same native resolution.
I've tried a bunch of different resolutions but none of them seem to use my monitors native resolution. I'm using the included DVI to VGA adaptor into the monitor. The monitor works fine if I plug it into my old Dell XP Laptop or XP desktop.
Does anyone have any suggestions?

Same "fuzzy" picture on external LCD attached to MacBook Pro here (2GHz, 2GB RAM, 10.4.11). Been using a mediocre NEC LCD72vx for along time and figured that was the reason, but I tried a stellar ViewSonic VG191b that I use with my Windows desktop for layout and found the same slightly fuzzy picture, despite also noting that the resolution setting was the native one. Note, I use the external display rotated 90, but I saw no change at 0 rotation. Straight DVI on both.
Half of the fun of having DVI out is its usefulness for layout in publishing. Powerful MBP, poor external display quality. I think some sort of fix is indicated here.

My 13''macbook pro 2011 don't read the usb

i have an external hdd and it disconect every 10 sec..is a hardware problem?

It's too early to determine if it's a hardware problem, but your only problem is that the HD disconnects, the problem is probably isolated to the drive.
If a HD disconnects every few seconds, it might be a faulty cable...but it's probably due to the fact that the HD needs more power. If you have a powered jack, use that; if not, plug the USB drive directly into your Mac jack - not the USB hub.
If you're still having problems, include the kind of machine you're using, how it's connected to the USB, and when the problem first started happening.

Hello. I have a macbook pro 2011 that originally came with os lion (on the computer not a disk). What I did was I downloaded Os Mountain lion. There was nothing wrong with it but I just feel the battery life is too short. So what I did was I tried to do s

Hello
I have a macbook pro 2011 13" that came with OS Lion (integrated not on a disk). I recently bought OS Mountain Lion of the app store and it is working fine. However I was a bit dissapointed in the battery so I decided to try and downgrade and completely failed, I froze the computer and when I restarted it it did not work. I went into recovery system and erased my disk and all that and went to re-download my OS. I was expecting to get the option to re-download Lion but instead I could only re-download Mountain Lion.
My question is since my computer originally came with Lion can I reset my computer so I get OS Lion back instead of OS Mountain Lion?
Thanks for any help. Any answer will be appreciated even if it is saying it is not possible.

Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
    1.    Select Disk Utility from the main menu and click on the Continue button.
    2.    After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on the Erase tab in the DU main window.
    3.    Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
    4.    Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Kappy, a pretty wonderful and very knowledgeable man, has tip for that which I have copied and pasted above

How do I hook another monitor up to my macbook pro (2011)

How do I hook up another monitor, besides a mac display, to my macbook pro (2011)?

Dual Link DVI allows for seriously high resolution monitors (up to 2560 by 1600 like the Apple 30inch LED Display - Not manufactured anymore), I believe HDMI has a cap of traditional 1080p (1920*1080).
Edit: according to the HDMI Wiki Article it supports resolutions MUCH higher than 1080p, it's a matter of finding a Computer Monitor that supports higher than that (as I believe most Televisions only support up FULL HD 1080p)

IMac (2006) als Monitor für Macbook Pro (2011)

Hallo zusammen. Ich suche einen passenden Adapter, um meinen iMac (2006) als Monitor für mein Macbook Pro (2011) benutzen zu können. Es sieht so aus, dass ich einen Adapter Mini DVI auf Thunderbolt benötige; leider finde ich keine passenden Angebote. Gibt es so etwas überhaupt?
Womöglich muss ich zwei Adapter hintereinander anschließen…
Weiß jemand Rat?
Grüße
D.S.

Leider hat ein 2006 iMac keinerlei Video-Input Fähigkeit.
Dieses Feature, welches Apple Target Display Mode nennt, steht erst mit den 2009 und 2010 27" iMacs bzw. den 2011 ThunderBolt iMacs zur Verfügung.
Vielleicht kann ScreenRecycler http://www.screenrecycler.com/ScreenRecycler.html Dir weiter helfen.
Erwarte aber keine Geschwindigkeits-Wunder damit
Stefan

External monitor options For Macbook Pro(2011)

Just curious as to what my monitor options are as a external monitor for the Macbook Pro. I'm pretty much set on 27'' thunderbolt display but its a hefty price to swallow...
Best buy has some good deals on there 27'' monitor but can i get the same resolution and clarity from other brands that will be eqivalent to Apple?
I'd like to stay in the 27'' to 30'' size...
thanks

Any other options like Samsung, LG etc... that offer the same specs as the thunderbolt display?
Thanks

Macbook Pro 2011 - Apple It's time

Hi,
So I'm the owner of a new second-hand 17" Macbook, for years I've dreamed of getting one of these and today was finally the day it happened. Specs are
Macbook Pro 2011 Late
i7 2.4Ghz
6770m
8gb RAM
At first the laptop booted up fine so I decided to do what any new proud macbook owner would do, show it of at work. During the course of the day I experienced intermittent freezing issues and eventually a blue screen of death. I thought to myself that I must of brought a dud and immediately went to contact the person I brought it of for a refund. Being a genuine trader he was more than happy to oblige and give me a full refund. Frustratingly this macbook had already grown on me enough to the point where I was determined to research into solution. Initially I suspected a HDD fault so I went to attempt a apple internet recovery, all that solved was my blue screen of death and changed it to a grey screen of death. Digging deeper it was clear from countless others in my situation that the issue was being caused by the GPU.
Now I'm no apple genius but I have enough of a computer technical background to know when something has not been done right. Now clearly apple has done wrong in the manufacturing process of GPU soldering and thermal paste application. This issue is nowhere relevant to software except for the point in which the system switches from the integrated to the faulty discrete GPU like it's suppose to in high-intensive tasks. Having this macbook for only a day and some determined researching its pretty simple to join the dots. The soldering process and material they used was doomed to fail from the start, eventually all 2011 models with discrete GPU's will burn out, it just depends on how well their owners have taken care of them. In regards to the thermal paste application you will be able to see from my images the kind of care and pride apples has undertaken in applying it. There was more around the CPU & GPU than there was on itself, that's like having a peanut butter and jelly sandwich with most of the peanut butter and jelly smeared around the plate. Considering this laptop would of cost close to 4500NZ back in the day I can't imagine what other original 2011 Macbook owners are feeling.
What makes it worse is that apple techies you go to will say a full logic board replacement will be needed from your own pocket when your macbook was already doomed, isn't that a way to rub further salt into the wounds Apple. Opening up my macbook it was obvious to see that the logic board inside was not the original and sometime during it's lifetime it too had a full logic board replacement. However I can't say if it was for the same reasons. Regardless it's obvious that replacing the logic board does not solve the issue and wastes everybody's time and money.
Apple, these macs require two things.
-A solder repair for the GPU
-A re-application of thermal paste
It's really not that much to ask considering the worth of these laptops, also wouldn't you rather have these leaving a legacy of the ultimate desktop replacement than apples shameful ticking time bomb?
I'm typing this of the very macbook having these issues so for anyone who wants a temporary fix please refer to the free gfxCardStatus software which allows you to force integrated graphics only. For now it's stable but dreadfully hinders the potential this beast was made for.
"Sometimes when you innovate, you make mistakes. It is best to admit them quickly, and get on with improving your other innovations."
"Quality is more important than quantity. One home run is much better than two doubles."
Steve Jobs
In hopes that apple does not remove this post.

There is excessive swapping of data between physical memory and virtual memory.
That can happen for two reasons:
You have a long-running process with a memory leak (i.e., a bug), or
You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
In the Activity Monitor application, select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The process named "Safari Web Content" renders web pages for Safari and other applications. It uses a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider it a prime suspect.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

Bluetooth not working macbook pro 2011, AHT found nothing

My macbook pro 2011 has been having some issues with bluetooth. The system doesn't even recognize as having bluetooth hardware. I went under the hardware profile and it actually says No information found under bluetooth. I was able to do a full hour diagnostic test using Apple Hardware Test and everything was all clean. I'm not sure if this is Yosemite related or not. I definitely remember using my bluetooth enabled keyboard and mouse on my system before I upgraded to Yosemite. Wifi works fine. I've tried resetting PRAM, but nothing. I'm at a loss, not sure if there is anything else I can do.

Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

Macbook Pro 2011 running very slowly after upgrading to Mavericks

I am in deep trouble with my wife so any help would be gratefully accepted.
Shortly after Mavericks became available I upgraded my wife's Macbook Pro 2011 to use the new OS version. Ever since then, the Macbook has been running noticeably slowly. In particular, Mail is almost unusuable taking minutes to open and showing long delays while moving around messages, folders, etc. Excel and Word are also much slower, Safari is slow, in fact just about everything is grinding.
Any ideas on what can I can do to improve things and apease my unhappy wife would be much appreciated.
I have attached the Etrecheck output FYI
Thanks
Andrew
Hardware Information:
          MacBook Pro (13-inch, Late 2011)
          MacBook Pro - model: MacBookPro8,1
          1 2.4 GHz Intel Core i5 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 0:5:25
Disk Information:
          Hitachi HTS545050B9A302 disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 499.25 GB (361.28 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Computer, Inc. IR Receiver
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist 3rd-Party support link
Launch Agents:
User Launch Agents:
          [loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
          Dropbox
Internet Plug-ins:
          LogMeInSafari64: Version: 1.0.730 3rd-Party support link
          Google Earth Web Plug-in: Version: 6.0 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          OfficeLiveBrowserPlugin: Version: 12.3.6 3rd-Party support link
          Silverlight: Version: 4.0.50401.0 3rd-Party support link
          FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
          LogMeIn: Version: 1.0.730 3rd-Party support link
          Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
          QuickTime Plugin: Version: 7.7.3
          LogMeInSafari32: Version: 1.0.730 3rd-Party support link
          iPhotoPhotocast: Version: 7.0
          JavaAppletPlugin: Version: 14.8.0 - SDK 10.9 Outdated! Update
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
Bad Fonts:
          None
Old Applications:
          /Library/Application Support/Microsoft/MERP2.0
                    Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                    Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
          SuperDuper!:          Version: 2.7.1 - SDK 10.4 3rd-Party support link
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
               7%          Safari
               6%          Dropbox
               5%          WindowServer
               3%          hidd
               2%          com.apple.WebKit.Networking
Top Processes by Memory:
          119 MB          com.apple.IconServicesAgent
          106 MB          Safari
          94 MB          Finder
          94 MB          Dropbox
          94 MB          Mail
Virtual Memory Information:
          1.26 GB          Free RAM
          1.44 GB          Active RAM
          311 MB          Inactive RAM
          1014 MB          Wired RAM
          251 MB          Page-ins
          0 B          Page-outs

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Will Remote Desktop allow me to access and use my Mac Pro 2009 from my MacBook Pro 2011?

Own a small business, have two locations, I need to use Windows via Parallels on my Mac Pro 2009, but I am forced to spend most of my time at the other location which has a MacBook Pro 2011. Will Remote Desktop allow me to use the MacBook Pro 2011 to access the Mac Pro and use Windows via Parallels?

If all you need is to be able to control another computer, then ARD would be overkill. If the systems have Mac OS X 10.5 or later you can use the Screen Sharing built into those versions of Mac OS X to control the system.
Another and perhaps easier option is to use a service such as LogMeIn or TeamViewer. Either option may be significantly easier than dealing with screen sharing or ARD.
You'll want to confirm that any solution you choose will work with Parallels, of course. I haven't tried remote control of a system to use Parallals, so there may be special considerations there. If you don't get useful comments here, you might try Parallels' forums.
Regards.

I've installed windows 7 with the help of bootcamp on my macbook pro 2011. Please help me how to install mac drivers for windows7 64 bit???

I've installed windows 7 with the help of bootcamp on my macbook pro 2011.
Please help me how to install mac drivers for windows7 64 bit???

You either download drivers from within Boot Camp Assistant and save to USB FAT disk, or you insert and use 10.6.x OS X DVD when in Windows and install and run the SETUP from there.
General Help:
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
- support articles and tips, how to.
http://www.apple.com/support/bootcamp/
Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
http://support.apple.com/kb/HT1846
Step 4: Install the Boot Camp Drivers for Windows
After installing Windows, install Mac-specific drivers and other software for Windows using your Mac OS X installation disc. The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
To install the Boot Camp drivers:
1 Eject the Windows installation disc.
2 Insert the Mac OS X disc. If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
3 Follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
Windows that appear only briefly during the installation don’t require your input.
If nothing appears to be happening, there may be a hidden window that you mustrespond to. Check the taskbar and look behind open windows.
Important: Do not click the Cancel button in any of the installer dialogs.
4 After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (Windows XP only).
5 Follow the instructions for any other wizards that appear.
6 Check for updated Boot Camp drivers by using Apple Software Update or going to www.apple.com/support/bootcamp.
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc.

Is there a compatibility issue with the Current USB 3 external Hard drives and MacBook Pro 2011 (USB 2)?

I am currently having bad hangs with my 13" MacBook Pro (2011) which I book 2012 ad a New external Harddrive (WD My Passport Edge) which was given to me as a gift.
Friends of mine told me there is a compatibility issue between the USB 3 cord and the USB outlet of my MacBook Pro.
Although this shouldnt be the case as the box of the Hard drive I got said it was compatible.
I even downloaded the WD Drive Utilities and sometimes whenthe Harddrive is plugged in the Utilities doean't Open but just bleeps in the Applications Dock.
Before I used the Harddrive I read a lot from the WD Manual and went to their site and downloaded a firmware update so I really don't know what the problem is.
What I am afraid of is that I may lose some files if I place them in the external Harddrive.
Can anyone help me with this or should I be asking for a replacement harddrive?
This is my first experience with an external hard drive as I never used one before.
Thank you very much.

To be honest, I've had back luck with Western Digital drives and I avoid them at all costs. If I were you, I would return the WD drive and look at externals from OWC or MacMall (LaCie, even G-Tech).
That's just my personal opinion, mind you...
Clinton

When installing Windows 8 from a USB to my MacBook Pro 2011 only EFI Boot option shows, there is no normal Windows Boot option

Hello. I want to install Windows 8 on my MacBook Pro 2011 form a USB stick. And when I restart, holding Alt. There only option is EFI Boot, which doesn't work. And there is no usual Windows option. I have tried instaling using an external optical drive, but it doesn't work. And I don't have an internal drive because it has been replaced with a HDD. Please help.

try kunu's solution here and report back
https://discussions.apple.com/thread/5105056?tstart=0

Macbook Pro 2011 don't recognize Monitor AOC e224eFw, hence not displaying correct resolution

Similar Messages

Maybe you are looking for