Macbook Pro 2011 getting worn out

My MBP from 2011 is starting to get worn out on the keyboard. The keys i use a lot has begun to have a clear/brigt spot in the middle of it.
I was just wondering what you guys are doing to preserve your MB´s so to speak and what would you recommend me doing? I was planning on getting a keyboard cover, but I can´t seen to find any that will fit my european keyboard, or perhaps just use it as I normally would and then get it replaced at a Apple retailer.

For outer case protection I use this: http://goincase.com/products/detail/hardshell-case-cl57188m it's an incase hard surface shell, that protects my Macbook Pro. It has a nice soft feel, and rubber feet to keep it from moving on hard surfaces. It doesn't scratch and protects my MBP well. Not a dent or scratch on it. I also found this very long link on European keyboard cases hope this helps: http://www.kbcovers.com/servlet/Categories?category=MacBook%2FMacBook+Air+13%22% 3AISO+European+Keyboard%3AClear+%26+Colors

Similar Messages

How hot exactly can a macbook pro 2011 get before overheating.

I want to play games on my macbook pro 2011, but I only want to play ones that will not overheat it, and it tends to get hot on some of them, how hot exactly can they get? at what temperature will they overheat? is there a way to check?

You may download from the Internet iStat pro which monitors the internal temperatures of the MBP as well as the fan speeds. The temperatures can get as high as 100 C. but before any harm can occur there are internal temperature sensors that will shut the MBP down.
Ciao.

Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
I have had this working previously but at the minute it seems to not be playing ball....any thoughts
Thanks
Dan

BUMP
Any ideas?

MacBook Pro 2011 get hot and noise all the time and slowly ?

hi. why MacBook Pro get too hot and make a noise all the time i have Yosemite ,mac late 2011 and became very slow?

Games are very CPU/GPU intensive applications and will heat up the MBP. That will result in the fans increasing speed in order to dissipate the heat. This actually is an expected result and for the type of application, is 'normal'.
I you plan to play a lot of games, consider getting a cooling pad twhich will tend to mitigate the heating.
Ciao.

Macbook Pro 2011 getting really hot?

I have an early 2011 macbook pro 15" monitor. Lately, I haven't been able to even touch the bottom of my laptop because of how hot it gets. Here's the temperatures and fan: Right now, it's cool enough to pick up, but about twenty minutes ago the computer got really hot and the fans didn't sound like they were on very high (this was before I downloaded the widget to see the actual values). I was also only using Chrome, no other apps. I started to notice this when I started using facetime: the fans suddenly didn't spin like crazy when the temperature rose. Is there any fix/tip/help for this? I will try and update once I get the higher temperature to appear again.

Hi t,
You can try an app such as SMC Fan Control which will allow you to set the fans to the speed of your preference.

Installation from Games on MacBook Pro 2011

At the installation from Games on MacBook Pro 2011, noises comes out of the flash drive, if i raise the macbook.
can errors develop ?
Thank you for answering

At the installation from Games on MacBook Pro 2011, noises comes out of the flash drive, if i raise the macbook.
can errors develop ?
Thank you for answering

Is it normal for a 2011 2.2 macbook pro to get really hot while watching a HD youtube video?

Is it normal for a 2011 2.2 macbook pro to get really hot while watching a HD youtube video? The fans get really loud and everything gets pretty hot when im just watching some lame video on youtbe thats HD? for a 2.2 quadcore wth 1gb of video ram this is an issue? I would think it wouldnt even phaze it.

MajorPie wrote:
hmm
Only running firefox and itunes.
4 gb of ram
more than 15% available
up to date flash, flip4mac
never heard of perian. its a quicktime player? would this help?
Give Allan's advice a try. I'm curious to see how that works for you.
4GB RAM could be part of the issue. Open Activity Monitor, select System Memory and see what it says for Page ins, Page outs, and Swap used.
Perian isn't a necessity, but those three together usually cover all the different formats you might encounter.

How do I get a licence for Photo shop which ran out (they didn't tell me that when I bought the MacBook Pro - I get error 150/30

how do I get a licence for Photo shop which ran out (they didn't tell me that when I bought the MacBook Pro - I get error 150/30?

Download Adobe's License Repair Tool: Error "Licensing has stopped working" | Mac OS
Additional information you may find useful: http://blog.erikphansen.com/adobe-cs4-error-15030-aka-i-hate-adobe-reason-34/

I'm using a macbook pro 2011 15",while i was charging it,i accidentally switched off the power supply while it is half way charging,will the battery get damaged if charging got interupted and switched on and off?

i'm using a macbook pro 2011 15",while i was charging it,i accidentally switched off the power supply while it is half way charging,will the battery get damaged if charging got interupted and switched on and off?

you are welcome

What cable do I need to buy to connect my Macbook Pro (2011) to a VGA screen? I tried the "Mini DisplayPort to VGA", but apparently it doesnt fit the 2011 Pro version...

As the topic says,
What cable do I need to buy to connect my Macbook Pro (2011) to a VGA screen? I tried the "Mini DisplayPort to VGA", but apparently it doesnt fit the 2011 Pro version...
Help me out please.

Yes ... minidisplay
But what I do not like in that picture (my personal view, others may think differently), is that there is much plastic around the connectors where the cable must fit. You may ot may not be able to get the cable to *fully seat* with the adapter.
Other adapters (http://www.microcenter.com/single_product_results.phtml?product_id=0334087, yes I know this is a DVI) hve no plastic barriers to connections.

Macbook Pro 2011 charging behaving weird. Charges and stops repeatedly and takes very long. Help?

So a few weeks ago my MacBook Pro 2011 started having charging problems. I would use it normally. Then plug it in to charge anywhere between 5-20 percent like I've been doing for the past year that I've had it (since August 2011). Anyway, what happens now is that it charges but extremely slowly - at least 4 hours to fully charge as opposed to the 1 1/2 to 2 hours that it used to take. Also, it seems to be draining a lot quicker than it used to while only browsing the internet. Furthermore, while charging, the battery meter goes from the percent its charged to to "not charging" back and forth. What's going on? Is there a problem with my battery, my computer, or the magsafe charger? [please refer to the pictures below to get a better understanding of my problem - these pictures were taken over a 2 hour time period - a time period that usually is enough to charge my computer] - if you'll notice, in the first two pictures, the percent barely went up by 10 in a half hour period:
Here are my Mac power stats:
Battery Information:
Model Information:
Serial Number:-----------
Manufacturer:          SMP
Device Name:          bq20z451
Pack Lot Code:          0
PCB Lot Code:          0
Firmware Version:          406
Hardware Revision:          2
Cell Revision:          158
Charge Information:
Charge Remaining (mAh):          6156
Fully Charged:          Yes
Charging:          No
Full Charge Capacity (mAh):          6393
Health Information:
Cycle Count:          343
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          -1607
Voltage (mV):          12182
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          25
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          15
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
Display Sleep Uses Dim:          Yes
GPUSwitch:          2
PrioritizeNetworkReachabilityOverSleep:          0
RestartAfterKernelPanic:          157680000
Standby Delay:          4200
Standby Enabled:          0
Battery Power:
System Sleep Timer (Minutes):          20
Disk Sleep Timer (Minutes):          0
Display Sleep Timer (Minutes):          15
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
GPUSwitch:          2
Reduce Brightness:          Yes
RestartAfterKernelPanic:          157680000
Standby Delay:          4200
Standby Enabled:          0
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          No
Charging:          No
Does anyone have any idea what the problem may be?
Thank you,
macstr

try doing a SMC RESET and see if that sorts it out for you.
if doesn't work - better take it to Apple and have them look at it before something else goes wrong...
good luck - hope you get it sorted out..

Macbook Pro 2011 - Apple It's time

Hi,
So I'm the owner of a new second-hand 17" Macbook, for years I've dreamed of getting one of these and today was finally the day it happened. Specs are
Macbook Pro 2011 Late
i7 2.4Ghz
6770m
8gb RAM
At first the laptop booted up fine so I decided to do what any new proud macbook owner would do, show it of at work. During the course of the day I experienced intermittent freezing issues and eventually a blue screen of death. I thought to myself that I must of brought a dud and immediately went to contact the person I brought it of for a refund. Being a genuine trader he was more than happy to oblige and give me a full refund. Frustratingly this macbook had already grown on me enough to the point where I was determined to research into solution. Initially I suspected a HDD fault so I went to attempt a apple internet recovery, all that solved was my blue screen of death and changed it to a grey screen of death. Digging deeper it was clear from countless others in my situation that the issue was being caused by the GPU.
Now I'm no apple genius but I have enough of a computer technical background to know when something has not been done right. Now clearly apple has done wrong in the manufacturing process of GPU soldering and thermal paste application. This issue is nowhere relevant to software except for the point in which the system switches from the integrated to the faulty discrete GPU like it's suppose to in high-intensive tasks. Having this macbook for only a day and some determined researching its pretty simple to join the dots. The soldering process and material they used was doomed to fail from the start, eventually all 2011 models with discrete GPU's will burn out, it just depends on how well their owners have taken care of them. In regards to the thermal paste application you will be able to see from my images the kind of care and pride apples has undertaken in applying it. There was more around the CPU & GPU than there was on itself, that's like having a peanut butter and jelly sandwich with most of the peanut butter and jelly smeared around the plate. Considering this laptop would of cost close to 4500NZ back in the day I can't imagine what other original 2011 Macbook owners are feeling.
What makes it worse is that apple techies you go to will say a full logic board replacement will be needed from your own pocket when your macbook was already doomed, isn't that a way to rub further salt into the wounds Apple. Opening up my macbook it was obvious to see that the logic board inside was not the original and sometime during it's lifetime it too had a full logic board replacement. However I can't say if it was for the same reasons. Regardless it's obvious that replacing the logic board does not solve the issue and wastes everybody's time and money.
Apple, these macs require two things.
-A solder repair for the GPU
-A re-application of thermal paste
It's really not that much to ask considering the worth of these laptops, also wouldn't you rather have these leaving a legacy of the ultimate desktop replacement than apples shameful ticking time bomb?
I'm typing this of the very macbook having these issues so for anyone who wants a temporary fix please refer to the free gfxCardStatus software which allows you to force integrated graphics only. For now it's stable but dreadfully hinders the potential this beast was made for.
"Sometimes when you innovate, you make mistakes. It is best to admit them quickly, and get on with improving your other innovations."
"Quality is more important than quantity. One home run is much better than two doubles."
Steve Jobs
In hopes that apple does not remove this post.

There is excessive swapping of data between physical memory and virtual memory.
That can happen for two reasons:
You have a long-running process with a memory leak (i.e., a bug), or
You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
In the Activity Monitor application, select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The process named "Safari Web Content" renders web pages for Safari and other applications. It uses a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider it a prime suspect.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

Issue with Macbook Pro 2011

Hi there. I have a brand new MacBook Pro 2011 and I'm having some problems with my wireless connection. I have in the same room a Mac Mini, my Ipad , my Ipod, 3 PC's and all of them have a wireless connection. I notice that since my last MacOSX update I have some problems with my wireless connectivity in my Macmini. Now I'm having the same problem in my macbook pro. I have internet in all my other devices but no internet in my Mac Mini or Macbook. The Access point is 5 meters away from my devices. I put some repeater in the middle to repeat the signal but I'm getting the same beavior. Can someone help me on this? If I go to the network setting and renew my DHCP address I can access the internet but after 15 minutes I'm getting the same problem again.

The signal bar on the menubar is not always an accurate indicator of how strong the signal is. A more accurate measure is if the signal drops entirely and you are definitely in range of the airport base station. Also anywhere within 3 meters you may get signal degradation because of overlapping radio waves cancelling each other out. You also have the option to ask to speak to a customer relations person when you call AppleCare, and ask for an expedited repair, and have your airport card properly seated. Sometimes they can get loose, or the antenna can get loose inside, though normally this isn't a problem unless the machine has to be opened for some reason.

No audio from hdmi on macbook pro 2011

I just upgraed to Lion but now I can't get audio out of my HDMI. Any thoughts?
Using macbook pro 2011 OS Lion, connecting to Samsung HD tv via HDMI.

Hi tehrabyte. There are no Windows 8.1 drivers for your model on HP's driver site. This download has worked for a few people with audio issues when going to 8.1. Try uninstalling your existing audio drivers and reinstalling this driver. Please let me know if it works.
IDT High-Definition (HD) Audio Driver:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=ob-124012-1
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Tried to update the EFI on Macbook Pro 2011 & Crashed?

Hey all
So this is my new Macbook Pro 2011! FIrst apple producct ever!
I installed a bunch of updates to my mac before & they worked fine- without issue
but i recently tried to install the Macbook Pro 2.3 Firmware Update & the thunderbolt firmware update but something went horribly wrong
The mac was plugged into the wall and the magsafe charger was lit green- and the update downloaded & seemed to have installed- but on reboot i got a horrible single beep & the HDD went out...
Then after that it tried to reboot on its own 3 more times b/ci heard the fan- but it was without a display [just a black screen but no picture] & but the HDD kept getting cut off...
I held down the power button for 7 seconds & it finally booted normally after a prolonged apple logo screen
& now it seems to be working fine...
can you guys tell me what the heck just happened? My macbook crashed? :[ /?
btw system prefrences says the update is installed- but system update still says its avialable?? O_O

Hey Pennyboy24,
I have an early 2011 Macbook Pro and I also just updated to the Macbook Pro 2.3 EFI Firmware Update. Mine updated fine but when the MBP restarted, it also made that single long single beep and it was slow to restart. Once it restarted, everything seemed to be normal but now my System Updates don't work. Everytime I click on System Updates, I get an error that says it crashed. Since your System Update says the EFI Firmware Update is still available and my System Update now crashes, I'm thinking the update messed up something with System Update. I've just spent weeks trying to get my OS X Lion working so this really ***** to have the EFI Firmware Update cause me another problem. Anyone with suggestions?

Macbook Pro 2011 getting worn out

Similar Messages

Maybe you are looking for