MacBook Pro 2011: Inconsistent cycle count for battery

hi folks,
i observed some strange behavior of the cycle count reported by the system.
when i got the machine the count was at one.
after loding the system twice the count was already at 6 cycles. (i really attached the power cord only twice and the system got continuous power. once i observed the the cycle counts changed while being on battery).
did anybody observed that behavior as well?
thx
stlei

The way the cycle count work is by percentage... eg if the computer runs on battery it has a 100% charge when full. If you discharge it 20% consider that 0.2 of a cycle count, these small percentages do add up. Now if you keep your computer plugged in all the time and you are experiencing these weird cycle counts and honestly have kept the adapter plugged in ALL the time, then please try to do a SMC reset (Shutdown the computer and make sure the charger is plugge in. Hold down the left shift key, the left control key and the left option key. Once those are held down press the power button, release the power button then the keys. Wait 5 seconds and boot up the machine.) If you are still having issues please call 1-800-APL-CARE... Apple is investigating strange hardware issues and the engineers would like to take a look at your computer.

Similar Messages

MacBook Pro 2011 Repair Extension Program for Video Issues -Feedback?

Anybody have any feedback from the MacBook Pro 2011 Repair Extension Program for Video Issues?
I had my early 2011 15 inch 8,2 repaired (free) under the extension program. The machine now appears to run well - but much hotter than before. The case is significantly hotter - especially at the GPU corner and the fans are constantly on moderate to high (not full). Anybody else experiencing similar changes?

Run an Apple Hardware Test;
https://support.apple.com/en-us/HT201257
Note an error free AHT is not definitive.
install iStat menus:
http://bjango.com/mac/istatmenus/
Set Activity Monitor to ALL PROCESSES and set CPU to display values from high to low.
When the MBP gets hot, post images of both for inspection.
Ciao.

Why does my brand new MacBook pro have 13 cycles on the battery right out of the box?

Why does my brand new MacBook pro have 13 cycles on the battery right out of the box? Shouldn't it have 0 because it's brand new.

horn0371 wrote:
Why does my brand new MacBook pro have 13 cycles on the battery right out of the box? Shouldn't it have 0 because it's brand new.
Yes it should have 0. I would return it, that means that the battery has already went through 13 full cycles. Perhaps they accidentally resold a returned one as new.

MacBook Pro 2011 doesn't charge the battery at all. Only works with the powercord. Reset SMC already. Ideas?

The battery doesn't charge at all anymore.
My Macbook pro suddenly stopped working without the cord plugged in.
And when the laptop is switched off, it switches on by its own as soon as I plug it in.
I reset the SMC, to no avail.
Any tips?
Thanks.
MacBook Pro (13-inch Early 2011), Mac OS X (10.6.8), 2.3GHz Intel Core i5 processer

If it has a replaceable battery, then consider replacing it.
Open System Profiler in Utilities folder. After it opens click on the Power entry in the sidebar. See what it reports for your battery. If it's no longer usable it will generally say "Service."
If you don't have a user-replaceable battery, then take it to an Apple Store.

Macbook pro 2011 battery question.

I got a macbook pro 2011, and I'm charging, draining and recharging the battery daily, i have the mac for almost 2 months and i have 75 cycles complete and the battery is on 92%, i want to know if I'm doing a good work charging the battery the way I'm doing it, or do i need to use another method, i work daily with this macbook pro in design, thanks in advance for the answer.

Honestly, I think you're cycling your battery a little too much. Apple recommends that you cycle your battery 2-3 times a week. So this means
2 months = 8 weeks
8 x 3 (cycles) = 24.
You should have roughly 24 cycles for the duration that you've had the computer, 75 is a little much for 2 months, don't you think?
I would strongly suggest cycling the battery only 2-3 times a week. Also, only do a FULL discharge every month. You should make the change NOW before you permanently damage your battery. I have the 2.3 2011 Hi res 15 inch MBP.

Hello. I have a macbook pro 2011 that originally came with os lion (on the computer not a disk). What I did was I downloaded Os Mountain lion. There was nothing wrong with it but I just feel the battery life is too short. So what I did was I tried to do s

Hello
I have a macbook pro 2011 13" that came with OS Lion (integrated not on a disk). I recently bought OS Mountain Lion of the app store and it is working fine. However I was a bit dissapointed in the battery so I decided to try and downgrade and completely failed, I froze the computer and when I restarted it it did not work. I went into recovery system and erased my disk and all that and went to re-download my OS. I was expecting to get the option to re-download Lion but instead I could only re-download Mountain Lion.
My question is since my computer originally came with Lion can I reset my computer so I get OS Lion back instead of OS Mountain Lion?
Thanks for any help. Any answer will be appreciated even if it is saying it is not possible.

Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
    1.    Select Disk Utility from the main menu and click on the Continue button.
    2.    After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on the Erase tab in the DU main window.
    3.    Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
    4.    Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Kappy, a pretty wonderful and very knowledgeable man, has tip for that which I have copied and pasted above

Average Maximum Cycle Count for Early 2008 MacBook (Black)

I have a black early 2008 MacBook that now in its fourth year, and I have noticed that battery health have started to diminish.
I am wondering what is the maximum battery cycle count for the early 2008 black MacBooks, and if its time to replace it? (I have 250 cycle count, with 78% health remaining)

You can get a new third party battery fairly cheap on eBay. Every MacBook from 2006 through Mid 2009 except the Late 2008 Aluminum Unibody and the Late 2009 and 2010 White Unibodies use the same A1185 battery.
Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
Or for $129 from The Apple Store http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY

Hi I have a MacBook Pro 2011 i7 and it stays on for about 4 hours then the screen go's fuzzy and I have to turn it off by the power button has anyone had this problem thanks mike

I Have a MacBook Pro i7 2011 it stays on for about 4 hours then the screen go's all fuzzy and I have to turn it off by the power button has any body else had this problem thanks mike

My guess would also be a failling connection between your logicboard and your GPU. See 2011 MacBook Pro and Discrete Graphics Card
For most users it starts with some random crashes and freezes like you describe it. And then it just gets worse and worse. There are still no "good" solutions, sadly. This is a hardware problem from the production.

Where can i download the driver for my ethernet controller on windows 7 (macbook pro 2011)

where can i download the driver for my ethernet controller on windows 7 (macbook pro 2011).
after the installation of windows 7 i cant use my wlan or audio.

http://www.apple.com/support/bootcamp/

I've installed windows 7 with the help of bootcamp on my macbook pro 2011. Please help me how to install mac drivers for windows7 64 bit???

I've installed windows 7 with the help of bootcamp on my macbook pro 2011.
Please help me how to install mac drivers for windows7 64 bit???

You either download drivers from within Boot Camp Assistant and save to USB FAT disk, or you insert and use 10.6.x OS X DVD when in Windows and install and run the SETUP from there.
General Help:
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
- support articles and tips, how to.
http://www.apple.com/support/bootcamp/
Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
http://support.apple.com/kb/HT1846
Step 4: Install the Boot Camp Drivers for Windows
After installing Windows, install Mac-specific drivers and other software for Windows using your Mac OS X installation disc. The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
To install the Boot Camp drivers:
1 Eject the Windows installation disc.
2 Insert the Mac OS X disc. If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
3 Follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
Windows that appear only briefly during the installation don’t require your input.
If nothing appears to be happening, there may be a hidden window that you mustrespond to. Check the taskbar and look behind open windows.
Important: Do not click the Cancel button in any of the installer dialogs.
4 After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (Windows XP only).
5 Follow the instructions for any other wizards that appear.
6 Check for updated Boot Camp drivers by using Apple Software Update or going to www.apple.com/support/bootcamp.
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc.

HT3053 where can i buy a macbook pro 2011 battery

where can i buy a macbook pro 2011 battery

Apple would be a good place to start...
http://www.apple.com/v20110414080359/support/macbookpro/service/battery/

HT1199 I am trying to download OSX Yosemite onto my Macbook Pro 2011. It asks me for an administrative password to continue. I do not have an administrative password. What do I do?

I have a Macbook Pro 2011 with operating system OS X Lion 10.7.5
I am trying to download OS X Yosemite from ITunes/Apple Store and it asks for an administrative password which I do not have. What do I do?
Linda

Hello Chernells,
Thank you for using Apple Support Communities.
The following article explains the administrator password required for software installations.
Mac OS X: Software installations require administrator password - Apple Support
Regards,
Jeff D.

Is anyone having a problem connecting 400 firewire thru an adapter for the 800 firewire port on a Macbook Pro 2011? It does a kernel panic every time I connect it. Is there a "proper way" to connect it?

Is anyone having a problem connecting 400 firewire thru an adapter for the 800 firewire port on a Macbook Pro 2011? It does a kernel panic every time I connect it. Is there a "proper way" to connect it? Just in case it makes a difference I am trying to hook up an Avid Mbox Pro for Pro tools.

What is the part number and model of Firewire adapter?
I have used them in the past without any problems whatsoever.
Allan

Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?

Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?
Unfortunately do not know the operating system since I never updated anything and I can't get in to it.
Thanks for your assistance.

If you want to preserve the data on the boot drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

Recommended external HDD for MacBook Pro 2011 15"?

Hello,
I'm looking for external HDD for new MacBook Pro 2011 15". Is there any external HDD available with Thunderbolt port? Any recommended HDD using FireWire 800 port?
Since this is m first Mac, I'm not much familiar with Mac Accessories. Any further info would be greatly appreciated.
Thanks.

That's a good drive, but not as great as those based on 3.5" hard drives. The nice thing about buying that drive is you can swap your hard drive in your MacBook Pro with the one in that case. 3.5" hard drives as desktop hard drives typically are faster, and are more suited to a desk environment. 2.5" hard drives are great for portable use. Be sure to get the DC in adapter for it to plug in the wall. There may be times you don't have enough power on the computer to keep it up.

MacBook Pro 2011: Inconsistent cycle count for battery

Similar Messages

Maybe you are looking for