Macbook Pro 2011 SATA III support

I would like to know if the new Macbook Pro 2011 supports SATA III SSD's. I know the thunderbolt needs the Sandy Bridge to work, however I am not sure if that means that the chip will definitely support a SATA III SSD. Does anyone know ????

Eww,
Thank you very much or your response. I have a clarifying question. I am looking at buy a OCZ VERTEX 3 SATA III 2.5" SSD and I just want to be sure that if I spend the money on it I am going to get 100% functionality to include the 6/Gbps, minus of course the TRIM feature because from what I understand Apple locked it out. Do you know if this drive will work on the 2011 MacBook Pro.

Similar Messages

Macbook Pro 2011 do not support SATA III?

Macbook Pro 2011 do not support SATA III?

Yes, they do, sort of! It's funny because I was about to complain about my THIRD 2011 MacBook Pro and while SATA III works fine in the main hard drive bay, it will not let me put a second SSD into the optical drive bay for a RAID 0 solution. This affects all 15" and 17" MBP's, but strangely enough, it works just fine on the 2011 13" MBP's. GRRR! This is so infuriating.

Macbook Pro SSD SATA III - Worth it?

Hello everyone
I own a mid-2010 13 inch MacBook Pro (2.4 Core 2 Duo). Since i cannot afford a new mac, i want to speed it up a little bit.
The first thing i did was to upgrade the memory to 8GB (from Crucial). The next thing i would like to do, is replace the hard disk with
an SSD one. I have checked many SSD's and i ended up between Crucial and OWC (128GB versions).
I can afford the cost of an SSD but i just realized that these drives are SATA 3. While, if i am not mistaken, my macbook
supports SATA 2 as maximum speed. Is it worth to buy a 6GB/s SSD afterall or not?
I would really appreciate your help and experience.
Thanks
Dimitris

You're correct, they are SATA II, which is limited to 3Gb/s, so it's not worth it to get the faster solid state. Still, though, even at 3Gb/s, you're going to see a giant performance boost over your current hard disk. Enjoy your solid state!

Help: Slow Crucial C300 256GB SSD in 17" MacBook Pro (2011) via SATA III 6Gb/s

Computer: 2011 17" MacBook Pro
Drive: Crucial C300 256GB
Drive Firmware: Revision 7
Bay: Main Drive Bay (6Gb/s)
OS: Lion 10.7.1
I did a fresh install of 10.7.1 and I'm getting these speeds on the above configuration:
Here is the same test run on my previous computer, a 2008 Mac Pro, with SATA II (same exact drive):
What is going on here? The Mac Pro with SATA II was running the C300 faster than the brand new 17" MacBook Pro 2011 running SATA III. This drive should be getting up up to 355MB/s read on SATA III.
Can someone please help me figure out why this drive is not running faster in my computer?
Thank you in advance.
FYI - I did install the new EFI 2.2 Update that was released in September. The above tests were after I installed the update! So you can rule out that I didn't install this update that supposedly fixed SATA speed issues on these Mac's.

I solved it. Xbench didn't give the best results. I tried other benchmarking tools and concluded that I am getting the SATA III speeds on this drive on this MacBook Pro.

Hello, I have a Macbook Pro 2011, and put an SSD on it. Yesterday i upgrade to Yosemite and sadly mi trim is not supported .... I really need (and demand) a solution to this, because like i see in the manual of the mac, Iam allowed to install a disk.

Hello, I have a Macbook Pro 2011, and put an SSD on it. Yesterday i upgrade to Yosemite and sadly mi trim is not supported .... I really need (and demand) a solution to this, because like i see in the manual of the mac, Iam allowed to install a disk.

Try a Safe Boot to clear the dyld_shared_cache (dynamic loader cache)
SafeBoot http://support.apple.com/kb/HT1564
Safe Boot, which automatically rebuilds this cache (among other things).

Graphic for macbook pro 2011?

Hi Guys:)
i reacently purchased the new Macbook pro 2011 and after a while of usage i wonder if there is any way external or internal (doesn't matter) to boost your graphic preformance??

7200RPM hard drives can boost your overall performance, and so can SSDs. 17" MacBook Pros can have external SATA via Express/34 added to boost performance. Hard drives that are over 85% full will significantly degrade performance. Make sure any hardware drivers or software you have has been tested with your GPU, and CPU, and operating system down to the point release. Just because something is 10.6.x compatible doesn't mean it is anything more than 10.6 and 10.6.1 compatible. It may have issues with 10.6.7.
Run the font update for 10.6.7 if it hasn't been already, if you are running 10.6.7:
http://support.apple.com/kb/DL1377

How can I setup my thunderbold display to work as my primary display? I would like to have my macbook pro 2011 as my second display. thanks

I have and Macbook pro 2011 february. I have installed Lion with the lastest update. I would like to use my thunderbold display as my primary display. The same way when I close my MB Pro 2011, but I wish to use my Macbook pro display as my secondary display.
thanks

If your Mac has got Mini DisplayPort, purchase a Mini DisplayPort to HDMI adapter and a HDMI cable. You won't have to change any setting, and image will show on your TV after connecting it to your MacBook Pro. See > http://support.apple.com/kb/HT4241?viewlocale=en_US&locale=en_US

Macbook Pro 2011 running very slowly after upgrading to Mavericks

I am in deep trouble with my wife so any help would be gratefully accepted.
Shortly after Mavericks became available I upgraded my wife's Macbook Pro 2011 to use the new OS version. Ever since then, the Macbook has been running noticeably slowly. In particular, Mail is almost unusuable taking minutes to open and showing long delays while moving around messages, folders, etc. Excel and Word are also much slower, Safari is slow, in fact just about everything is grinding.
Any ideas on what can I can do to improve things and apease my unhappy wife would be much appreciated.
I have attached the Etrecheck output FYI
Thanks
Andrew
Hardware Information:
          MacBook Pro (13-inch, Late 2011)
          MacBook Pro - model: MacBookPro8,1
          1 2.4 GHz Intel Core i5 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 0:5:25
Disk Information:
          Hitachi HTS545050B9A302 disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 499.25 GB (361.28 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Computer, Inc. IR Receiver
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist 3rd-Party support link
Launch Agents:
User Launch Agents:
          [loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
          Dropbox
Internet Plug-ins:
          LogMeInSafari64: Version: 1.0.730 3rd-Party support link
          Google Earth Web Plug-in: Version: 6.0 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          OfficeLiveBrowserPlugin: Version: 12.3.6 3rd-Party support link
          Silverlight: Version: 4.0.50401.0 3rd-Party support link
          FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
          LogMeIn: Version: 1.0.730 3rd-Party support link
          Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
          QuickTime Plugin: Version: 7.7.3
          LogMeInSafari32: Version: 1.0.730 3rd-Party support link
          iPhotoPhotocast: Version: 7.0
          JavaAppletPlugin: Version: 14.8.0 - SDK 10.9 Outdated! Update
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
Bad Fonts:
          None
Old Applications:
          /Library/Application Support/Microsoft/MERP2.0
                    Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                    Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
          SuperDuper!:          Version: 2.7.1 - SDK 10.4 3rd-Party support link
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
               7%          Safari
               6%          Dropbox
               5%          WindowServer
               3%          hidd
               2%          com.apple.WebKit.Networking
Top Processes by Memory:
          119 MB          com.apple.IconServicesAgent
          106 MB          Safari
          94 MB          Finder
          94 MB          Dropbox
          94 MB          Mail
Virtual Memory Information:
          1.26 GB          Free RAM
          1.44 GB          Active RAM
          311 MB          Inactive RAM
          1014 MB          Wired RAM
          251 MB          Page-ins
          0 B          Page-outs

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

How to reformat a Macbook pro 2011 hard drive?

Hello,
How do you reformat a MacBook Pro (OS X 10.7.3) 2011s Hard drive? I already backed up all the files I wanted to save. But since I have the new Macbook pro 2011 (only a few months since I got it) it didn't come with an installation disc, but instead already came with all the applications. I'm wondering how to reformat the hard drive so it wipes out everything and I can start fresh and what would happen to all the applications?

Well Lion has a Lion Recovery Partition on the drive you can access by holding command r and booting, there you can erase the Lion OS X partition completely (all files and programs) and reinstall Lion or simply reinstall Lion if there is a issue with it (no programs or files are touched in this second procedure)
Lion is downloaded from apple's servers, you need AppleID and a fast reliable internet connection with no bandwidth caps limiting you.
https://support.apple.com/kb/HT4718
If you want to replace the drive, there is software called Carbon Copy Cloner than can clone both the Lion OS X Partition and the Lion Recovery Partition to a external drive intact (excpet what's in the Trash, no Filevualt, no bootcamp, use free Winclone for that)
Hold the option key and you can boot from the external drive and format and clone everything to the new internal drive. TimeMachine of 10.7.2 and later can be booted from it's Lion Recovery Parttion as well just to restore only, cloning is better process because it gives full access to everything like before on the internal drive.
http://www.bombich.com/index.html
Some newer Mac's have Lion Internet recovery built in where the firmware will install the Lion Recovery/OS back onto a completely blank/new hard drive.

I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable. I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?

I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable. I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?

Download the supplemental fix to 10.7.5
http://support.apple.com/kb/DL1599

How do I hook another monitor up to my macbook pro (2011)

How do I hook up another monitor, besides a mac display, to my macbook pro (2011)?

Dual Link DVI allows for seriously high resolution monitors (up to 2560 by 1600 like the Apple 30inch LED Display - Not manufactured anymore), I believe HDMI has a cap of traditional 1080p (1920*1080).
Edit: according to the HDMI Wiki Article it supports resolutions MUCH higher than 1080p, it's a matter of finding a Computer Monitor that supports higher than that (as I believe most Televisions only support up FULL HD 1080p)

Where can i download the driver for my ethernet controller on windows 7 (macbook pro 2011)

where can i download the driver for my ethernet controller on windows 7 (macbook pro 2011).
after the installation of windows 7 i cant use my wlan or audio.

http://www.apple.com/support/bootcamp/

I've installed windows 7 with the help of bootcamp on my macbook pro 2011. Please help me how to install mac drivers for windows7 64 bit???

I've installed windows 7 with the help of bootcamp on my macbook pro 2011.
Please help me how to install mac drivers for windows7 64 bit???

You either download drivers from within Boot Camp Assistant and save to USB FAT disk, or you insert and use 10.6.x OS X DVD when in Windows and install and run the SETUP from there.
General Help:
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
- support articles and tips, how to.
http://www.apple.com/support/bootcamp/
Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
http://support.apple.com/kb/HT1846
Step 4: Install the Boot Camp Drivers for Windows
After installing Windows, install Mac-specific drivers and other software for Windows using your Mac OS X installation disc. The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
To install the Boot Camp drivers:
1 Eject the Windows installation disc.
2 Insert the Mac OS X disc. If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
3 Follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
Windows that appear only briefly during the installation don’t require your input.
If nothing appears to be happening, there may be a hidden window that you mustrespond to. Check the taskbar and look behind open windows.
Important: Do not click the Cancel button in any of the installer dialogs.
4 After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (Windows XP only).
5 Follow the instructions for any other wizards that appear.
6 Check for updated Boot Camp drivers by using Apple Software Update or going to www.apple.com/support/bootcamp.
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc.

Display issue - My macbook pro 2011 detects my display but does not display an image

Hi, I am having a problem connecting my MacBook Pro (2011) to my HP 2511x display. I used the display all morning with my mbp connected and closed. When I came back, after the computer went to sleep, I cannot get any image on the display. The computer detects the display but no image appears.
I have tried-
Installing the latest firmware and software updates
restarting both the computer and monitor
trying all of the possible display arrangements and settings for resolution and refresh rates
Also I am connected using a minidisplay to DVI adaptor in the thunderbolt port.
Any and all suggestions appreciated.
thanks.

Hello Aminetti,
It sounds like your computer goes to sleep, and will not wake up, so you must manually restart your computer. I recommend the troubleshooting in the following article:
OS X: When your Mac doesn't sleep or wake
http://support.apple.com/kb/TS5357
Reset SMC
Reset NVRAM/PRAM
Test with external devices disconnected
Try Safe Mode
Try another user account
Thank you for using Apple Support Communities.
All the best,
Sterling

HT3053 where can i buy a macbook pro 2011 battery

where can i buy a macbook pro 2011 battery

Apple would be a good place to start...
http://www.apple.com/v20110414080359/support/macbookpro/service/battery/

Macbook Pro 2011 SATA III support

Similar Messages

Maybe you are looking for