Macbook pro 2011 screen doesn't dim all the way in part of the screen
Hi, all--
This is really puzzling me so I hope someone can help me out. My Macbook Pro 13 inch (2011, Sept.) screen, when you dim it about halfway or less, shows something like a yellowish splotch in the middle of the screen, the size of around 4 quarters clustered in the middle. It was to the point where I could easily read the text on the screen even though the rest of the screen was pitch black. Now it's less pronounced (it was really bad about 5 minutes ago) but the middle of the screen is still readable even when the rest of the screen is black.
Does anyone know why this is, or why it might have gotten so obvious earlier? It was so bad that when the screen dimmed automatically there was literally this yellowish cast in the middle such that it wouldn't dim.
Please help!
Thanks.
That's not normal, and I've not experienced this with two MBPs. I would suggest you visit your local Apple Store/Genius Lounge so that they can repair the problem. In any case, post here with your results; I'm sure fellow users would profit from the information!
Similar Messages
-
MacBook Pro 2011 get hot and noise all the time and slowly ?
hi. why MacBook Pro get too hot and make a noise all the time i have Yosemite ,mac late 2011 and became very slow?
Games are very CPU/GPU intensive applications and will heat up the MBP. That will result in the fans increasing speed in order to dissipate the heat. This actually is an expected result and for the type of application, is 'normal'.
I you plan to play a lot of games, consider getting a cooling pad twhich will tend to mitigate the heating.
Ciao. -
I did everything the article suggests. And for my macbook pro it works perfectly. But all the other devices (iphone 5, 4, Macbook Air) can't connect to the network. Anybody any idea's?
Try resetting your modem. Power it down. Wait a moment, then power it up again. While it resets, do not change what is connected to it.
In another, though unrelated article, Apple recommends the following:
If you have configured your Wi-Fi base stations in the past, it may be helpful to do a factory default reset of each Wi-Fi base station that will be part of the wireless extended network before you begin.
This step really ought not be considered optional for the configuration you propose. If the problem persists after resetting your modem, reset everything else too. -
can i run windows xp(no virtualization software) in my macbook pro retina 15 inch mid 2012 . all the bootcamp compatible to my laptop support only win 7 or 8.
Not without using a VM. XP is no longer supported in Boot Camp or on newer Apple computers.
-
When I am listening to the radio (streaming through itunes) my macbook pro will log me out, quitting all the applications I have running (often firefox, word processing, itunes, etc). Why?
It's very frustrating and I don't understand why it happens. It might happen other times, but I notice it the most when I'm streaming the radio through itunes, though I think it's also happened when I'm streaming music or shows from NPR, so I don't actually know if it's an itunes thing, or an internet thing? Or just my computer being stupid? But how can I fix it?
Thanks!My best guess at this point is a problem wwith 10.5.8
It seems clear to me that sometimes, seemingly randomly, software will access the video card (flash player, quicktime, Safari's HTML5 video player, etc) and it will cause a freeze and then log out.
However - it could just be video card + processor under load.
This didnt happen before 10.5.8 and I'm thinking it's not the new 27" display causing the issue.
I'm going to attempt to find time to revert back to 10.5.0 and then combo update back up to 10.5.7 which may be difficult as our IT is remote and we don't have access to Snow Leopard discs.
I may just have to bring my own in. -
Macbook Pro 2011 Screen Black/Sleeping
I've had my MBP 2011 for less than a week. This happened once before, but I shrugged it off, and now it's happened a couple times just today. This happens when I close my computer and it goes to sleep. After I open it, instead of waking normally and functioning, it either
a) does not wake from sleep, screen stays black (so far I've simply closed it again for a few seconds, and opened it again and then the screen will come back)
b) wakes from sleep, goes to normal screen for a second, then the blue screen for a second, and then comes back to normal
Any ideas why this is happening or how to fix it?
Thanks in advance.My experience is the same. With Avatron's Air Display installed I have two issues (below), when I uninstall Air Display they go away.
I have a new Macbook Pro, 2.3 GHZ Intel Core I7 running OS X 10.6.7. All system (and firmware) updates installed.
I mentioned two issues when I have Air Display installed.
1. During the boot process the screen briefly shows what appears to be corrupted video memory. See this image of the screen.
2. I have the black screen on wake issue as described here and elsewhere.
I don't know that they are correlated but it seems reasonable to expect they are. In any case, both issues appear to go away immediately when I uninstall Air Display using the provided uninstaller.
I have tried touching the Extensions folder, booting in safe mode, etc. I have spent many many hours (more than I care to remember) trying to narrow this down, and I think this is it. I will leave it uninstalled for a few weeks and see. -
News MacBook Pro 2011 screen yellow
I have a MacBook Pro 13 i7 processor and the screen yellow
Does anyone know about this problem and have advice that would save me a trip to the Apple store?
thanks!I actually had a similar issue happen to my macbook pro recently.
The screen turned aqua and I could not fix it. I took it to best buy geek squad (theres where I bought it w my warrenty) and had them look at it and they said that it was due to the wires inside the computer connecting the keyboard base to the screen being lose or disconnected.
First, check if it is the display settings. Just go to display preferences and click the color option, you shouldnt have to change anything. If this works, then nothing is wrong with your computer. If not, its probably the above situation (wires disconnected).
They have to send it for a repair, which can be expensive if you do not have a warrenty. The total cost for mine was $1700, so they let me get a brand new computer for the value of $1800 and they give you back any money that is left over on a gift card.
If you have a warrenty, take in for repair ASAP. If not, you can expect to pay a hefty price to have it repaired. -
Macbook Pro getting slower and slower, freezing all the time
Hi,
My early 2011 Macbook Pro is gettin slower and slower, and I'm pretty sure Mavericks only worsened the condition. This is my report, can someone help me on why this is happening?
Hardware Information:
MacBook Pro (13-inch, Early 2011)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
Startup Items:
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
System Software:
OS X 10.9.1 (13B42) - Uptime: 1 day 1:28:0
Disk Information:
TOSHIBA MK5059GSXP disk0 : (500,11 GB)
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) /: 499,25 GB (54,63 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information:
JMicron USB to ATA/ATAPI bridge 500,11 GB
EFI (disk2s1) <not mounted>: 209,7 MB
Filmes (disk2s2) /Volumes/Filmes: 499,76 GB (330,53 GB free)
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. iPhone
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
de.novamedia.driver.NMSmartplugSCSIDevice (1.0.1)
com.Cycling74.driver.Soundflower (1.5.1)
com.bresink.driver.BRESINKx86Monitoring (8.0)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.oracle.java.Helper-Tool.plist
Launch Agents:
[failed] com.brother.LOGINserver.plist
[loaded] com.oracle.java.Java-Updater.plist
[loaded] de.novamedia.VodafoneDeviceObserver.plist
User Launch Agents:
[failed] com.akamai.single-user-client.plist
[loaded] com.facebook.videochat.[redacted].plist
[failed] com.google.GoogleContactSyncAgent.plist
[loaded] com.macpaw.CleanMyMac.helperTool.plist
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist
[loaded] com.spotify.webhelper.plist
[loaded] com.valvesoftware.steamclean.plist
User Login Items:
uHD-Agent
GrowlHelperApp
Alfred
uTorrent
Dropbox
iShutdown
HyperDock Helper
Assistente de gestor de conteúdo
3rd Party Preference Panes:
Akamai NetSession Preferences
Fan Control
Flash Player
Flip4Mac WMV
Growl
HyperDock
Java
Internet Plug-ins::
DirectorShockwave: Version: 11.5.9r620
o1dbrowserplugin: Version: 4.9.1.16010
Unity Web Player: Version: UnityPlayer version 3.4.2f3 - SDK 10.5
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.3.8.1
RealPlayer Plugin: Version: Unknown
Silverlight: Version: 5.1.20913.0 - SDK 10.6
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
Flash Player: Version: 11.9.900.170 - SDK 10.6
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 4.9.1.16010
npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
JavaAppletPlugin: Version: Java 7 Update 45
Bad Fonts:
None
Old applications:
Content Manager Assistant: Version: 1.10.4086.78 - SDK 10.5
/Users/duarte_cunharosa/Applications/CMA.app
Content Manager Assistant: Version: 1.10.4086.78 - SDK 10.5
/Applications/CMA.app
FacebookVideoCalling: Version: 1.2.0.157 - SDK 10.5
/Users/duarte_cunharosa/Library/Application Support/Facebook/video/1.2.0.158/FacebookVideoCalling.app
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Document Connection.app
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4
/Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
Microsoft Excel: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Excel.app
Microsoft Graph: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Graph.app
Microsoft Language Register: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
Microsoft Outlook: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Outlook.app
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft PowerPoint.app
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4
/Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
Microsoft Word: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Word.app
Miro Video Converter: Version: 2.6 - SDK 10.0
/Applications/Miro Video Converter.app
My Day: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/My Day.app
Open XML for Excel: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Open XML for Excel.app
Plants vs: Version: 1.0.40 - SDK 10.5
/Applications/Plants vs. Zombies.app
RipIt: Version: 1.6.2 - SDK 10.5
/Applications/RipIt.app
SLLauncher: Version: 1.0 - SDK 10.5
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
Solver: Version: 1.0 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
SyncServicesAgent: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
UPlayBrowser: Version: 1.0.1.23853 - SDK 10.5
/Library/Application Support/Ubisoft/Assassin's Creed Brotherhood/UPlayBrowser.app
Time Machine:
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 464.96 GB Disk used: 414.09 GB
Destinations:
Time Machine [Local] (Last used)
Total size: 698.32 GB
Total number of backups: 3
Oldest backup: 2013-12-20 18:10:54 +0000
Last backup: 2013-12-22 19:52:17 +0000
Size of backup disk: Too small
Backup size 698.32 GB < (Disk used 414.09 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
9% Transmission
4% Dropbox
2% WindowServer
2% Dock
1% Google Chrome
Top Processes by Memory:
123 MB Google Chrome
119 MB iTunes
102 MB Dropbox
87 MB Google Chrome Helper
66 MB Finder
Virtual Memory Statistics:
148 MB Free RAM
995 MB Active RAM
859 MB Inactive RAM
1.03 GB Wired RAM
7.80 GB Page-ins
4.84 GB Page-outsIf you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on general principle, not because of anything suggested in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help identify which such modifications you've installed, as well as some other aspects of the configuration that may be related to the problem.
Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: In each of two steps, you copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is copy; paste; paste again. That's all there is to it. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual. If it only boots in safe mode, use that.
Below are instructions to enter UNIX shell commands. They do nothing but produce human-readable output. However, you need to think carefully before running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
The commands will line-wrap or scroll in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. Step 1 should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n' "$1" "$o"; }; PC () { o=$(grep [^[:blank:]] "$2"); PR "$1"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; }; { system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(( $(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256 )); [[ $o -gt 1024 ]] && printf "\nPageouts: %s MiB\n" $o; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; PC "cron configuration" /e*/cron*; o=$(crontab -l | grep [^[:blank:]]); PR "User cron tasks"; PC "Global launchd configuration" /e*/lau*; PC "Per-user launchd configuration" ~/.lau*; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {,/}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist") || ID=; ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {,/}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; } 2> /dev/null | pbcopy; echo $'\nStep 1 done'
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
The command may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "Step 1 done" to appear below what you entered. The output of the command will beautomatically copied to the Clipboard. All you have to do is paste into a reply to this message by pressing command-Vagain. Please don't copy anything from the Terminal window. No typing is involved in this step.
Step 2
Remember that you must be logged in as an administrator for this step. Do as in Step 1 with this line:
PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n' "$1" "$o"; }; { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l | grep [^[:blank:]]); PR "Root cron tasks"; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2>&- | pbcopy; echo $'\nStep 2 done'
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
You can then quit Terminal. Please note:
☞ Steps 1 and 2 are all copy-and-paste — type only your login password when prompted.
☞ When you type your password, you won't see what you're typing.
☞ If you don’t have a password, set one before taking Step 2. If that’s not possible, skip the step.
☞ Step 2 might not produce any output, in which case the Clipboard will be empty. Step 1 will always produce something.
☞ The commands don't change anything, and merely running them will do neither good nor harm.
☞ Remember to post the output. It's already in the Clipboard. You don't have to copy it. Just paste into a reply
☞ If any personal information, such as your name or email address, appears in the output of either command, anonymize it before posting. Usually that won't be necessary.
☞ Don't post the contents of the Terminal window.
☞ Don't paste the output of Step 1 into the Terminal window. Paste it into a reply. -
Macbook pro slow, kernel task is taking all the memory
Hi,
I'm having problems with my Macbook Pro (13-inch, Early 2011). It's been very slow lately, not only when starting but mostly all the time, even when it comes to Internet and basic tasks. I went to the activity monitor and found out this kernel_task which is consuming mostly of all my memory, and i've been reading to find out that it's a wide-shared problem.
I downloaded EtreCheck and ran it trough so that maybe someone could help me:
EtreCheck version: 1.9.12 (48)
Report generated 22 Jul 2014 16:59:27 GMT+2
Hardware Information:
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 0:24:57
Disk Information:
Hitachi HTS545032B9A302 disk0 : (320,07 GB)
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 319,21 GB (129,74 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5970H
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.option.driver.OptionMSD (1.11.0) Support
[not loaded] com.option.driver.OptionQC (1.11.0) Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
User Launch Agents:
[loaded] com.google.keystone.agent.plist Support
User Login Items:
GrowlHelperApp
Dropbox
Internet Plug-ins:
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 10.1.10 Support
AdobePDFViewer: Version: 10.1.10 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.2.0 - SDK 10.6 Support
Unity Web Player: Version: UnityPlayer version 3.1.0f4 Support
Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
Safari Extensions:
SaveFrom.net helper: Version: 3.70
Slick Savings: Version: 1.0
AdBlock: Version: 2.7.7
Zotero Connector: Version: 4.0.8
DuckDuckGo: Version: 1.6.1
DoNotTrackMe: Online Privacy Protection: Version: 3.2.1112
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
BlueStacks Install Detector: Version: Unknown
Google Earth Web Plug-in: Version: 7.1 Support
3rd Party Preference Panes:
Flash Player Support
Growl Support
Time Machine:
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 176.46 GB
Destinations:
Juan Manuel Ledesma Viteri' [Network]
Total size: 463.44 GB
Total number of backups: 2
Oldest backup: 2013-05-29 21:39:33 +0000
Last backup: 2013-08-01 22:25:01 +0000
Size of backup disk: Too small
Backup size 463.44 GB < (Disk used 176.46 GB X 3)
Juan Manuel Ledesma Viteri' [Network] (Last used)
Total size: 463.44 GB
Total number of backups: 47
Oldest backup: 2013-05-29 21:39:33 +0000
Last backup: 2014-07-22 10:03:44 +0000
Size of backup disk: Too small
Backup size 463.44 GB < (Disk used 176.46 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
2% WindowServer
1% Activity Monitor
1% fontd
0% sysmond
0% syncdefaultsd
Top Processes by Memory:
242 MB Safari
164 MB Finder
139 MB com.apple.WebKit.WebContent
111 MB mds_stores
102 MB com.apple.quicklook.satellite
Virtual Memory Information:
932 MB Free RAM
1.50 GB Active RAM
603 MB Inactive RAM
1023 MB Wired RAM
273 MB Page-ins
0 B Page-outs
I also entered in the Terminal :
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM deta
Here's the result of the scan:
Boot Mode: Normal
Model: MacBookPro8,1
Battery cycles: 832
System diagnostics
2014-07-21 com.apple.WebKit.WebContent spin
2014-07-22 CVMServer,diskarbitrationd,diskimages-helper,hdiejectd,launchd,m shutdownStall
2014-07-22 Safari spin
2014-07-22 Safari spin
2014-07-22 Safari spin
2014-07-22 Safari spin
2014-07-22 Safari spin
2014-07-22 backupd,diskarbitrationd,diskimages-helper,hdiejectd,identityser shutdownStall
2014-07-22 cfprefsd,launchd,nmpppstatsd,ubd shutdownStall
2014-07-22 com.apple.WebKit.WebContent spin
User diagnostics
2014-06-24 com.apple.WebKit.WebContent crash *
2014-07-17 com.apple.WebKit.WebContent crash *
2014-07-18 com.apple.WebKit.WebContent crash *
2014-07-22 Safari crash *
* Code injection
Kernel messages
--- last message repeated 3 times ---
Jul 16 12:44:33 MacAuthEvent en1 Auth result for: 5c:33:8e:e9:9d:fb Auth timed out
Jul 16 13:59:38 PM notification timeout (pid 252, Seagate Storage )
--- last message repeated 3 times ---
Jul 16 16:04:35 PM priority notification timeout
Jul 16 18:00:31 AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Juan Manuel Ledesma Viteri'
Jul 16 18:05:25 PM priority notification timeout
Jul 16 20:01:23 AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Juan Manuel Ledesma Viteri'
Jul 16 20:06:17 PM priority notification timeout
Jul 16 21:37:09 AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Juan Manuel Ledesma Viteri'
Jul 17 01:27:58 AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Juan Manuel Ledesma Viteri'
Jul 17 13:40:06 PM notification timeout (pid 236, Seagate Storage )
Jul 17 15:44:15 AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Juan Manuel Ledesma Viteri'
Jul 17 18:11:56 PM notification timeout (pid 236, Seagate Storage )
--- last message repeated 7 times ---
Jul 19 16:48:20 MacAuthEvent en1 Auth result for: 5c:33:8e:e9:9d:fb Auth timed out
Jul 19 21:06:01 PM notification timeout (pid 236, Seagate Storage )
Jul 20 12:23:00 MacAuthEvent en1 Auth result for: 5c:33:8e:e9:9d:fb Auth timed out
--- last message repeated 1 time ---
Jul 20 12:55:52 PM notification timeout (pid 236, Seagate Storage )
--- last message repeated 2 times ---
Jul 20 20:28:21 PM notification timeout (pid 265, Seagate Storage )
--- last message repeated 9 times ---
Jul 22 02:08:19 MacAuthEvent en1 Auth result for: 5c:33:8e:e9:9d:fb Auth timed out
Jul 22 10:21:09 PM notification timeout (pid 282, Seagate Storage )
Extrinsic daemons
com.microsoft.office.licensing.helper
com.adobe.fpsaud
Extrinsic agents
com.google.keystone.user.agent
launchd items
/Library/LaunchDaemons/com.adobe.fpsaud.plist
(com.adobe.fpsaud)
/Library/LaunchDaemons/com.microsoft.office.licensing.helper.plist
(com.microsoft.office.licensing.helper)
Library/LaunchAgents/com.google.keystone.agent.plist
(com.google.keystone.user.agent)
Extrinsic loadable bundles
/System/Library/Extensions/OptionMSD.kext
(com.option.driver.OptionMSD)
/System/Library/Extensions/OptionQC.kext
(com.option.driver.OptionQC)
/Library/InputManagers/Safari AdBlock/Safari AdBlock Loader.bundle
(net.sourceforge.SafariAdBlockLoader)
/Library/Internet Plug-Ins/AdobePDFViewer.plugin
(com.adobe.acrobat.pdfviewer)
/Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
(com.adobe.acrobat.pdfviewerNPAPI)
/Library/Internet Plug-Ins/Flash Player.plugin
(com.macromedia.Flash Player.plugin)
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
(com.microsoft.sharepoint.browserplugin)
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
(com.microsoft.sharepoint.webkitplugin)
/Library/Internet Plug-Ins/Silverlight.plugin
(com.microsoft.SilverlightPlugin)
/Library/Internet Plug-Ins/Unity Web Player.plugin
(com.unity.UnityWebPlayer)
/Library/PreferencePanes/Flash Player.prefPane
(com.adobe.flashplayerpreferences)
/Library/ScriptingAdditions/SIMBL.osax
(net.culater.SIMBL.osax)
Library/Address Book Plug-Ins/SkypeABDialer.bundle
(com.skype.skypeabdialer)
Library/Address Book Plug-Ins/SkypeABSMS.bundle
(com.skype.skypeabsms)
Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
(com.Google.GoogleEarthPlugin.plugin)
Library/PreferencePanes/Growl.prefPane
(com.growl.prefpanel)
Unsigned shared libraries
/usr/lib/libtcl.dylib
/usr/lib/libtcl8.5.dylib
/usr/lib/libtk.dylib
/usr/lib/libtk8.5.dylib
Safari extensions
AdBlock
DuckDuckGo
DoNotTrackMe- Online Privacy Protection
Zotero Connector
SaveFrom
Restricted user files: 209
Font problems: 41
Elapsed time (s): 243Please follow this updated version of the instructions you found.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Macbook Pro 15" Retina doesn't change to the better Graphicchip at Windows7
Good Morning,
i have the following problem with my Macbook.
In Windows 7 doesn´t switch my MBP to the GeForce GT 650M, he is only using the Intel HD Graphics 4000.
So in Games it is really laggy and not funny to play like this.
Games like Minecraft (in Fullscreen it change sometimes)
Chivalry (Steam) (only at HDMI)
Can someone tell me a way to change the graphicchip for ever at Windows7?
Or can i switch manual to the better graphicchip?
My Hardware:
Apple Macbook Pro Retina with 15"
GeForce GT 650M & Intel HD Graphics 4000
Intel Core i7 Ivy Bridge 2,3 GHz
512 GB SSD
16GB of RAM
Thank you so much for helping!
Greetings
Moin Moin,
ich habe folgendes Problem:
Unter Windows switcht mein Macbook bei Spielen nicht um auf die bessere Geforce und denkt ich will mit der Intel HD spielen...
Spiele wie Minecraft (im Vollbildmodus funktioniert es teilweise)
Chivalry (per HDMI funktioniert es)
Gibt es eine möglichkeit egal was ich in dem "falschen" Betriebssystem mache... Immer mit der GeForce zu arbeiten? oder Manuell umswitchen?
Zu meiner Hardware:
Apple Macbook Pro Retina mit 15"
Geforce GT 650M & Intel HD Graphics 4000
Intel Core i7 Ivy Bridge 2,3GHz
512GB SSD
16GB RAM
Vielen dank schonmal für Eure Hilfe!
GrüßeI've contact technical support several times and nobody can seem to help me with this issue.
What did they have you do?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios. -
My macbook pro 2011 wont turn on, it shows the apple sign and loading bar then switches off??
I Have tried turning on my macbook pro 13" 2011, it shows the apple sign on the white screen and the loading bar underneath but after a few seconds it turns off?
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
New - Macbook Pro - Running slow, beach ball spinning all the time
I've had my Macbook pro about 3 weeks and the beach ball is constantly spinning and I'm constantly having to force quit programs. Between Mail, Safari, and Aperture. Any ideas?
RobinONE POSSIBLE SOLUTION:
I've recently had the beach ball appearing every 30 seconds or so and then the Mac totally freezes.
After trying all the suggestions online, the solution that fixed my problem was to reset the SMU. It basically forces the fan to maximum power and cools your mac down. The problems I had were being caused by an overheating Mac, even though it looked like a system software issue!
The reset the SMU:
Shut your Mac down.
Unplug the power cable from the back of the mac and any other devices (keyboard, etc).
Leave the mac for at least 10 seconds.
Hold down the power button on the back of the mac.
Keep holding down the power button and re-attach the power cable.
Once the power cable is in place, release the power button.
Now press the power button again to start-up your mac. (You can plug your devices back in now).
You should now hear the fan at maximum levels (it's very noisy!).
If you have the same problem that I had, your mac should start to cool and your mac should start operating preperly again (it may take a few minutes).
If this works, you'll then need to download FAN CONTROL FOR MAC.
It's a control panel that better regulates the temperature of your mac than the standard settings. -
Macbook Pro (2011) speaker balance keeps resetting to the left
I recently notice that whenever I reboot/startup my macbook pro, the speaker balance keeps defaulting halfway to the left. I never notice it much except when I'm listening to songs that have some part only playing in one side. I just find it odd that during startup it defaults to be halfway to the left, and I'm wondering if there's a setting somewhere that I missed that can make it the default preference.
Are you using an external display?
Along with others, I have the same issue on a MBP 2011 when using the 27" Cinema Display:
https://discussions.apple.com/message/20360772#20360772 -
Macbook Pro 2012, updates before logging in all the time since updated to Yosemite
My macbook 2012 on turning on says user and then in brackets update required. It updates so slowly! Even after letting the update complete three times it still says it needs updated.. Help, its really annoying!
I haven't tried this with Yosemite.
Hide Update in Mavericks -
New 17 Macbook Pro 5 key is brighter than all the others
Why? Why? Why? I do alot of work in low light and this key is like a homing beacon. My OCD kicks in and this key drives me nuts. I went back to the Apple store where I purchased this and checked the other display models. The same issue, BUT only with the 17's not the 15's or 13's. The 15's look perfect as they should.
What happened. I've never had this issue with my other macbook's. What changed on the 17?
Can this be fixed or do I need to switch to the 15 or just deal with it.I just bought a used MBP 17 and its 5 key was much brighter than the others. I popped off the 5 key, trimmed a small piece of paper from the recycle bin, dabbed it with a black marker, and laid it into the top left corner of the hole where there was an obviously brighter zone of light shining from below. Replaced the key, now its just about the same as its neighbors and the physical keystroke isn't affected by the presence of the paper sliver.
Maybe you are looking for
-
So I've bought an Apple mini-DVI to video adapter so I can use front row on my TV. One caveat - when I try to use any photos in front row, it will hang indefinately because iPhoto will open and display a warning that my output resolution is too low.
-
I've tried deauthorizing and reauthorizing my computer, exiting and reentering itunes, restarting my computer...nothing is working! I don't know what else to do
-
HT1212 my ipad says it has a passcode on it but it dosent have a passcode
when i connect my ipad to my compuer this pops up:itunes couldnt connect to ipad because it is locked with a passcode. you must enter a passcode before you can use it with itunes. the problem is it isnt locked with a passcode. and it is a school ipad
-
Hi, My ALTER TABLESPACE MFGDMDATA READ ONLY command was stuck. Problem :- I am unable to understand if there is no query on that tablespace then why My query was stuck for 2 hours? My finding was below =================== SQL> SELECT SQL_TEXT, SADDR
-
Python3 gmail and conky [solved by using python2]
I have become quite dependent on conky displaying the contents of my gmail mailboxes and something seems to have broken since python3 came about. Can anyone with python knowledge point me to how to get it working again? Old code ## needs The urllib a