Macbook Pro 2011 slowed significantly to the point of unusable.
At first I deleted Gigabytes worth of unused songs, movies, documents, etc. No change. Did disk repair and disk permissions repair.
Kernel_task was taking up 560% of CPU. Backed up HD and did a factory reset. This stopped the kernel_task but was still slow. Reset PRAM and SMC. A little faster but still slow. Any other fixes I should try? I should also mention the battery is shot but I don't know if that would affect speed. Have re-tried disk permissions repair. I paid for the update to mountain lion. It began to slow sometime after that. It was then later updated to Mavericks and an unknwon amoutn of time afterwards became unusable. Now it's back to 10.6
AlyGShow wrote:
I should also mention the battery is shot but I don't know if that would affect speed.
If the OSX does not detect a functional battery it will throttle the CPU.
Open Activity Monitor to ALL PROCESSES and set %CPU to display values from high to low. Post an image.
Download Etrecheck and post the out put:
http://www.etresoft.com/etrecheck
Examine these articles for possible solutions:
http://www.thesafemac.com/mpg/
https://discussions.apple.com/docs/DOC-3521
Ciao.
Similar Messages
-
Trying to set up iCloud on my MacBook Pro, and I get to the point where it tells me to view my email for further instructions on verification of my account, but there is no such email in my inbox, even after submitting multiple requests to resend the email. Any idea what I can do? Mark
Well, running on a 2006 model. I did not have a startup disc. Initially, it booted up on original software in 2006. Since then, I've upgraded to 10.6 via a box set. And, since then I think I popped it up to lion.
All I have on a disc is snow leopard. And, I can't get farther than the setup screen due to hard drive. I'm taking to a apple authorized repair store right now. We'll see what they tell me . I'm just going to weigh the cost of repair vs. buying new.
Another bad, stupid thing is I had no means of backing up my stuff. So, I might have lost things like music, vids, etc. we'll see if they can recover. If the cost is too much for repair I might just forget it and start over with a new system. Just not sure at this point. -
Yosemite has made my Macbook Pro 2011 slow
Yosemite has made my Macbook Pro very slow. Here is my Etre check report. I am not too tech savvy so any detailed help would be MUCH appreciated!
Problem description:
Yosemite has made my macbook pro very slow
EtreCheck version: 2.1.8 (121)
Report generated March 22, 2015 at 8:30:07 PM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Click the [Adware! - Remove] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 580
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1440 x 900
AMD Radeon HD 6750M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 20 days 21:4:17
Disk Information: ℹ️
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.93 GB (416.19 GB free)
Core Storage: disk0s2 749.30 GB Online
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Logitech USB Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Adware: ℹ️
Geneio [Adware! - Remove]
Kernel Extensions: ℹ️
/Applications/Toast 8 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.3) [Click for support]
[not loaded] com.roxio.TDIXController (1.7) [Click for support]
/Incompatible Software/Parallels Access.app
[not loaded] com.parallels.virtualsound (1.0 22682.914869 - SDK 10.6) [Click for support]
/System/Library/Extensions
[not loaded] com.devguru.driver.SamsungComposite (1.2.57 - SDK 10.6) [Click for support]
[not loaded] com.mice.driver.Wireless360Controller (1.0.0d11) [Click for support]
[not loaded] com.mice.driver.WirelessGamingReceiver (1.0.0d11) [Click for support]
[not loaded] com.mice.driver.Xbox360Controller (1.0.0d11) [Click for support]
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.2.57 - SDK 10.6) [Click for support]
[not loaded] com.devguru.driver.SamsungACMData (1.2.57 - SDK 10.6) [Click for support]
[not loaded] com.devguru.driver.SamsungMTP (1.2.57 - SDK 10.5) [Click for support]
[not loaded] com.devguru.driver.SamsungSerial (1.2.57 - SDK 10.6) [Click for support]
Startup Items: ℹ️
360ControlDaemon: Path: /Library/StartupItems/360ControlDaemon
HP IO: Path: /Library/StartupItems/HP IO
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[killed] com.apple.sbd.plist
one process killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.ctkd.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.periodic-monthly.plist
[killed] com.apple.systemstats.analysis.plist
[killed] com.apple.wdhelper.plist
[killed] com.apple.xpc.smd.plist
7 processes killed due to memory pressure
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.hp.help.tocgenerator.plist [Click for support]
[failed] com.parallels.mobile.startgui.launchagent.plist [Click for support] [Click for details]
[running] com.pharos.notify.plist [Click for support]
[running] com.pharos.popup.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[not loaded] org.eyebeam.SelfControl.plist [Click for support]
User Launch Agents: ℹ️
[failed] com.facebook.videochat.[redacted].plist [Click for support] [Click for details]
[running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
iTunesHelper UNKNOWN Hidden (missing value)
Spotify Application (/Applications/Spotify.app)
Google Drive Application (/Applications/Google Drive.app)
KiesAgent Application Hidden (/Applications/Kies.app/Contents/MacOS/KiesAgent.app)
KiesViaWiFiAgent Application Hidden (/Applications/Kies.app/Contents/MacOS/KiesViaWiFiAgent.app)
fuspredownloader Application Hidden (/Users/[redacted]/Library/Application Support/.FUS/fuspredownloader.app)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
SharePointBrowserPlugin: Version: 14.1.0 [Click for support]
googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
Silverlight: Version: 4.1.10329.0 [Click for support]
iPhotoPhotocast: Version: 7.0
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
XBox 360 Controllers [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
20% mds
6% WindowServer
1% mds_stores
0% fontd
0% AppleSpell
Top Processes by Memory: ℹ️
266 MB Finder
125 MB WindowServer
116 MB Google Chrome
107 MB ocspd
90 MB Google Drive
Virtual Memory Information: ℹ️
94 MB Free RAM
1.47 GB Active RAM
1.40 GB Inactive RAM
1.20 GB Wired RAM
43.48 GB Page-ins
4.27 GB Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1302 ' 0.5 0.25 50 1000 15 5120 1000 25000 6 6 5 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1536 475 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 25 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:lifetime:sampled:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:Energy:Energy:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n ...and %d more line(s)\n' '\nContents of %s\n '"${k[22]}"'mod date: %s\n '"${k[22]}"'size (B): %d\n '"${k[22]}"'checksum: %d\n%s\n' );c=(879294308 4071182229 461455494 216630318 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 1591517921 676087606 1445213025 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of|yc/!{ s/^.+is |\.//g;p;q;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/ { print;n++;} END{if(n<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} !/:/&&!$2{print "'${k[23]}'"} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { if(a[2]) next;split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1==9||$1==10 { "ps -c -ouid -p"$4"|sed 1d"|getline $4;} $1<11 { o[$1]=o[$1]"\n "$3" (UID "int($4)"): "$2;} $1==11&&$5!~"^/dev" { o[$1]=o[$1]"\n "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==12&&$5 { "ps -c -ocomm -p"$5"|sed 1d"|getline n;if(n) $5=n;o[$1]=o[$1]"\n "$5" => "$3" (UID "$4"): "$2;} $1~/1[34]/ { o[$1]=o[$1]"\n "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<15;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"stat -f%z "F|getline S;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,S,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2'$'\t\t''\1/p' ' /^ +iP.+:$/{ s/://;b0'$'\n'' };/es: ./{ /iOS/d;s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8,9,10}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li|Tu).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub(/["\\]/,"",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^ |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') exit;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' {,1d\;}'/r%/,/^$/p' ' NR==1{next} NR>11||!$0{exit} {print $NF"\f"substr($0,1,32)"\f"$(NF-7)} ' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' '1;END { exit "find /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom -mtime -'${p[23]}'s"|getline;} ' ' NR<='${p[26]}' { o=o"\n"$0;next;} { o="";exit;} END{print o|"sed 1d"} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname powermetrics );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|succ|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|s ful|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"11\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"12\f%@d\f%s\f%d\f%d\n\",@d);printa(\"13\f%@d\f%s\f%d\f%d\n\",@e);printa(\"14\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*{,/*} .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} '~ "kMDItemKind=Package"' '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err|disk.+abo','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'M -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |ect pas|fmfd|Goog|ksho|ndum|obso|realp|rned f|/root|sandbox ex" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,{gui,user}/$UID} '-n1 --show-initial-usage --show-process-energy' -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {System,Login,Agent,User}' services '{load,disabl}ed {Admin,Root}\ access Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space Stylesheet Library\ paths{,' ('{shell,launchd}\)} Data\ packages );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2 F;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 31;B1&&! B2&&C2 32;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};B2&&{ A1 43 85 117;B3 29;B4 0 0 119 76 81 45;C0;B4 29 0 118 119 76 82 45;C0; };D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 74 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 75;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 120;B3 18;A1 33 60 121;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 86 114;j=$?;for i in 0 1 2;do ((i==2&&j==1))&&break;((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74||continue;B7 11;B4 0 0 11;C3 $((23+i*(1+i+2*j)));D4 $((24+i*(1+i+2*j))) 18-4*j 82+i-16*j $((112+((3-i)*i-40*j)/2));done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 72 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;D4 76 24 38;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 87 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B6 14 0 4;C3 67;A1 24 75 74;B4 1 1 122||B7 12;B4 0 0 123;B3 23;A2 39 57 30;B6 23 0 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 73;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The test results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
I am going to NYC in a week and I'm wondering if there is a store where I can buy a new trackpad for my Macbook Pro 2011 unibody. I would also like to buy the tools i need to replace it myself. I can't find anything when I search the interwebz.
The problem is that when the machine is closed, it goes to sleep, and in sleep mode, all that goes on is that a bare trickle of power is used to keep the contents of RAM alive. Networking is definitely not active while asleep.
Now, regarding ds store's solution, that's a fairly bad idea. If the machine is just sitting at your desk, you don't need to close it, or if you feel a need to close it you can use Kappy's solution. (Although, it should be noted that apps like InsomniaX and Caffeine do not, as far as I know, keep a machine awake when the lid is shut.) If you're worried about passersby seeing your screen, just activate the screen saver instead. You could even require a password to dismiss the screen saver for added security.
On the other hand, if the machine is being transported, keeping the lid open and the machine running is not a good idea. The sudden motion sensor ought to protect your hard drive against damage caused by moving the machine around... if it's working properly, and I'd rather not depend on an "if" to prevent hardware damage to the machine. Plus, if it's in a bag and you've forced it to stay running, it could overheat due to lack of ventillation.
So, long story short: if you're transporting it, close it and deal with logging back in to the network, and if it's on your desk, don't bother closing it. -
The battery doesn't charge at all anymore.
My Macbook pro suddenly stopped working without the cord plugged in.
And when the laptop is switched off, it switches on by its own as soon as I plug it in.
I reset the SMC, to no avail.
Any tips?
Thanks.
MacBook Pro (13-inch Early 2011), Mac OS X (10.6.8), 2.3GHz Intel Core i5 processerIf it has a replaceable battery, then consider replacing it.
Open System Profiler in Utilities folder. After it opens click on the Power entry in the sidebar. See what it reports for your battery. If it's no longer usable it will generally say "Service."
If you don't have a user-replaceable battery, then take it to an Apple Store. -
"Error Disk too Slow" Macbook Pro 2011 - Maverick and Yosemite - The Great Grand Mystery Unfolds!!!
Hey everybody,
Logic Pro X user here, have a late 2011 Macbook Pro, upgraded to 16gb of ram, 2.8ghz intel core i7, running latest version of Mavericks and more recently on a separate partition I tried Yosemite with a clean install of only Logic Pro X.
I use Apogee Quartet as my audio interface, I have a OWC Mercury Elite Firewire 800 external drive that I record to, all LPX files are on my internal drive.
Before Mavericks I had 0 issues with this setup, no with just one sole drummer track, or one single audio or software track, I get the various disk too slow errors after a few seconds.
I have tried reinstalling LPX, I tried a clean partition with nothing but Logic Pro on it (both Mavericks and Yosemite).
I have reset my PRAM and used Apple Hardware diagnostics as well as memtest (i think it was called) and even reverted back to my old original RAM that came with the computer. All hardware tests passed, I have verified and repaired disks from disk utility as well as from the recovery partition.
I have worked with Apple a bit over the phone doing these things, I have also read just about every thread on this pervasive issue. And its ruining my experience as a user. I absolutely loved Logic on Mountain Lion, no issues whatsoever! I'm considering reverting back to it actually.
On a side note I also have a HDMI Tv connected through the thunderbolt display, and a self powered USB hub that I connect my wireless mouse, iPhone cable and WD MY passport drive (which I only use for Time Machine).
I'm basically at my wits end and open to anybodies suggestions, I even tried resting the SMC and several other things advised in these forums.
I'm Stil under Apple Care and wondering if going into them is my only hope left.
I find that garageband acts the same, but I have no other system issues! its so bizarre, performance on all other programs is totally fine, its only when I want to record that I get issues.
For the record I do have some 3rd party VTS (Arturia V collection, EZ drummer 2 and AMplitube) but when I did the clean partition they weren't there and I still had the disk to slow error, so I'm not convinced its because of those.
Also Since the partition I obviously have played with my storage but I still have 75 gas of space on the mavericks partition (out of 500gb ) and on Yosemite partition I have 125 gbs available and on my Firewire external drive I have about 150gb left on a 500gb drive, so I'm not convinced its a space issue either (especially since before Mavericks Mountain Lion seemed to work just fine.)
HELP! Please help...I'm so exhausted trying to fix this on my own, and admittedly I've run to the end of my own capacity and don't know where to go from here.
Thank you for any suggestions, sorry for the long post, and if I have left anything out please let me know, this is my first post.And yes I did upgrade my apogee drivers to the recent ones they just released.
-
Macbook Pro 2011: slow after yosemite upgrade
Hi,
I recently upgraded to yosemite, and during the installation, the installation bar stopped at about halfway and stayed there for hours. Knowing that it was going nowhere, I powered the computer down and turned it on again. After this, the installation appeared to be completed because it let me actually use the computer, but it was painfully slow. So I redownloaded yosemite and tried to reinstall it. However, the installation got stuck at the same spot, and another manual reset resulted in use of the computer, albeit at a snail's pace.
So I tried to reset the PRAM, then i tried starting in safe mode, then i tried booting normally, none of which worked. After reading on these forums, I found out about Etrecheck, I was able to download it and ran it yesterday. Here are the results:
Problem description:
slow computer after installing os x yosemite 10.10.2
EtreCheck version: 2.1.8 (121)
Report generated March 25, 2015 at 2:02:36 AM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 314
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 2:42:8
Disk Information: ℹ️
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.85 GB (197.72 GB free)
Encrypted AES-XTS Unlocked Failed
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.joshuawise.kexts.HoRNDIS (6 - SDK 10.0) [Click for support]
Problem System Launch Agents: ℹ️
[killed] com.apple.AirPlayUIAgent.plist
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.cloudd.plist
[killed] com.apple.cmfsyncagent.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.EscrowSecurityAlert.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.SafariNotificationAgent.plist
[killed] com.apple.security.cloudkeychainproxy.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
11 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.awdd.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.periodic-daily.plist
[killed] com.apple.sandboxd.plist
[killed] com.apple.softwareupdated.plist
[killed] com.apple.tccd.system.plist
[killed] com.apple.wdhelper.plist
10 processes killed due to memory pressure
Launch Agents: ℹ️
[running] com.brother.LOGINserver.plist [Click for support]
[running] com.citrix.AuthManager_Mac.plist [Click for support]
[loaded] com.citrix.ReceiverHelper.plist [Click for support]
[running] com.citrix.ServiceRecords.plist [Click for support]
[loaded] com.intego.backupassistant.agent.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.fitbit.galileod.plist [Click for support]
[running] com.intego.BackupAssistant.daemon.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
User Launch Agents: ℹ️
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[running] com.codecm.uploader.plist [Click for support]
[running] com.google.keystone.agent.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
[loaded] com.valvesoftware.steamclean.plist [Click for support]
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 51 Check version
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
ChemDraw Plugin Pro: Version: 14 . 0 . 0 - SDK 10.6 [Click for support]
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
Safari Extensions: ℹ️
AllMyTube
codec-M
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 318.85 GB Disk used: 121.13 GB
Destinations:
LaCie [Local]
Total size: 405.09 GB
Total number of backups: 3
Oldest backup: 2014-01-19 00:29:58 +0000
Last backup: 2014-03-06 03:08:50 +0000
Size of backup disk: Adequate
Backup size 405.09 GB > (Disk used 121.13 GB X 3)
Top Processes by CPU: ℹ️
6% WindowServer
2% corestoraged
1% loginwindow
0% mds
0% systemmigrationd
Top Processes by Memory: ℹ️
116 MB mds_stores
107 MB com.apple.WebKit.WebContent
99 MB Safari
86 MB com.apple.preference.security.remoteservice
64 MB CalNCService
Virtual Memory Information: ℹ️
186 MB Free RAM
1.17 GB Active RAM
1.08 GB Inactive RAM
1.17 GB Wired RAM
3.01 GB Page-ins
33 MB Page-outs
Diagnostics Information: ℹ️
Mar 24, 2015, 10:41:04 PM Self test - passed
Mar 24, 2015, 06:22:08 PM /Library/Logs/DiagnosticReports/steam_osx_2015-03-24-182208_[redacted].cpu_reso urce.diag [Click for details]
Please and thank you for your help. I am currently writing ~2 words before the loading wheel comes up and stops me from typing for about 10 seconds.There are several ways to back up a Mac that is not fully functional. You need an external hard drive or other storage device to hold the data.
1. Start up from the Recovery partition, from Internet Recovery, or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
If you use FileVault 2, then you must first unlock the startup volume. Select its icon ("Macintosh HD," unless you gave it a different name.) It will be nested below another disk icon, usually with the same name. Click the Unlock button in the toolbar. Enter your login password when prompted.
2. If Method 1 fails because of disk errors, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
3. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
4. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data. -
MacBook Pro (2011) slowed down after Yosemite installed
I ran Etrecheck and got the following. Is this a memory problem or a software problem? Thanks!
Problem description:
Computer has slowed down immensely since installing Yosemite.
EtreCheck version: 2.1.8 (121)
Report generated February 22, 2015 at 12:14:43 PM MST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Late 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 173
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
AMD Radeon HD 6750M - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 86 days 1:38:58
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (302.21 GB free)
Core Storage: disk0s2 499.25 GB Online
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.leapfrog.codeless.kext (2) [Click for support]
[not loaded] com.leapfrog.driver.LfConnectDriver (1.9.8 - SDK 10.8) [Click for support]
[not loaded] com.microsoft.driver.MicrosoftMouse (6.2.1) [Click for support]
[loaded] jp.co.toshiba.driver.ToExtCmd (1.0.2) [Click for support]
/System/Library/Extensions/MicrosoftMouse.kext/Contents/PlugIns
[not loaded] com.microsoft.driver.MicrosoftMouseBluetooth (6.2.1) [Click for support]
[not loaded] com.microsoft.driver.MicrosoftMouseUSB (6.2.1) [Click for support]
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.cmfsyncagent.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.gamed.plist
[killed] com.apple.lookupd.plist
[killed] com.apple.printtool.agent.plist
[killed] com.apple.rcd.plist
[killed] com.apple.sbd.plist
[killed] com.apple.scopedbookmarkagent.xpc.plist
[running] jp.co.Toshiba.autorun.plist [Click for support]
9 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.ctkd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.GSSCred.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.nesessionmanager.plist
[killed] com.apple.periodic-monthly.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.systemstats.analysis.plist
[killed] com.apple.wdhelper.plist
[killed] com.apple.xpc.smd.plist
11 processes killed due to memory pressure
Launch Agents: ℹ️
[running] com.wyse.MacCompanion.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.leapfrog.connect.authdaemon.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[running] com.wyse.PocketCloud.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.leapfrog.connect.monitor.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
SpeechSynthesisServer Application (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
MicrosoftMouseHelper Application (/Library/PreferencePanes/Microsoft Mouse.prefPane/Contents/Resources/MicrosoftMouseHelper.app)
Google Drive Application (/Applications/Google Drive.app)
Google Chrome Application Hidden (/Applications/Google Chrome.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
CitrixICAClientPlugIn: Version: 11.4.3 - SDK 10.0 [Click for support]
SharePointBrowserPlugin: Version: 14.1.4 - SDK 10.6 [Click for support]
Safari Extensions: ℹ️
GMail Counter
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Microsoft Mouse [Click for support]
Time Machine: ℹ️
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 196.67 GB
Destinations:
TOSHIBA EXT [Local]
Total size: 999.86 GB
Total number of backups: 12
Oldest backup: 2014-09-10 22:13:49 +0000
Last backup: 2015-02-16 22:27:12 +0000
Size of backup disk: Adequate
Backup size 999.86 GB > (Disk used 196.67 GB X 3)
Top Processes by CPU: ℹ️
8% WindowServer
2% mds_stores
0% AppleSpell
0% MicrosoftMouseHelper
0% DashboardClient
Top Processes by Memory: ℹ️
107 MB discoveryd
73 MB Safari
56 MB Google Chrome
52 MB com.apple.WebKit.WebContent
39 MB mds
Virtual Memory Information: ℹ️
36 MB Free RAM
706 MB Active RAM
688 MB Inactive RAM
1.29 GB Wired RAM
300.27 GB Page-ins
9.64 GB Page-outsYou need more ram. But has it really been 3 months since you rebooted this computer? Restart it once in awhile and some of that slowness might go away.
-
MacBook Pro 2011 slow at low battery
I have an early 2011 MacBook Pro 13" and when the battery gets to around 15% all applications seem to slow down. After about a minute of being plugged in everything runs smoothly again. Is this normal? Is it just trying to save power by slowing down processors?
I should have been more explicit. My intent was not to suggest the the MBP should be connected to the AC outlet 100% of the time. If conditions permit, use the AC connection, if not use it under battery power. If you have had the MBP connected to the AC outlet for 4-6 weeks, then do disconnect it and run it with battery power to a 30% - 40% discharge level and the proceed with a charge back up to 100%.
All batteries deteriorate and discharge over the course of time regardless of whether they are being used or not. Chronological maximum battery life will be achieved by minimal to moderate battery usage. I have a replaceable battery in my old MBP that is about 4 years old and is and is a 91% health. The newer MBP has the original battery and in 19 months of usage is at 96% health. I may not achieve the number of cycles that Apple advertises, but I am confident that I will get at least 5+ years service from them.
Certainly there may be situations where an AC connection is not readily available and the cycle count will accumulate quickly and the battery life will be shortened as a consequence. (ex. a student in classroom environment) Such situations are the reason why we have battery powered MBPs, but if you discharge a battery totally every day, it will need to be replaced well within three years of service.
This link represents Apples official view on notebook batteries;
http://www.apple.com/uk/batteries/notebooks.html
Ciao. -
Macbook Pro is slow, freezing all the time and has Wi-Fi problems
Hello!
My Macbook Pro started acting kinda strange a couple of weeks ago. It's slow, freezing all the time and constantly connecting and reconnecting to the Wi-Fi network after around half a minute of usage.
Here is the story, as far as I know:
In the start of 2014, pup-up boxes started popping up on my Macbook Pro. They said that I had to enter a password for the Keychain to gain access to a service or something. The odd thing about it was that I had never set up my iCloud Keychain. It just started appearing without me knowing why. Unfortunately, I didn't know the password for this due to the fact that I never set it up. I tried every password combination that could possibly work, but I didn't get through it. I tried different solutions, but nothing worked out. I solved it by simply making a new user account on my Mac. I used this for like 1 month before the whole Mac with all its user started messing itself up.
It might be worth to notice that this secondary-user didn't require a password to log in, so when I closed my Macbook and re-opened it, it would continue where it was left off. This might have been the reason for the Mac sometimes to get really warm while being in my backpack, which might also have caused the problem. I am not sure though.
After using the secondary user for a while, the Mac started acting strange again. This time it was something different. One day, my girlfriend started up my Macbook Pro and noticed that it was extremely slow. I assumed it was just in the need of a restart, but that wasn't it. The computer started freezing all the time at first. It froze when I clicked something in an application, and I had to wait like 10 seconds for it to go back to normal. If I was typing anything on Facebook, it would freeze, but I could still use any other tab of the browser without any problems. However, they would freeze to if I did anything special on other websites. Every other program would also freeze for reasons like typing or clicking on anything.
After a short while, it started being really slow during startup and use. A few days ago, my Macbook Pro also started disconnecting from Wi-Fi networks while trying to load pages. It doesn't disconnect every time, but it does sometimes. It tries to reconnect after that, and if it succeed's, everything is back to normal for a while.
Additionaly, the battery have been draining faster, and when it reached 0%, the computer turned off and closed all the open programs. Normally it has entered Sleep Mode, but not anymore.
Do any of you have any clue what the issue might be?
I have done the following:
- Reset PRAM
- Restore to system defaults
- Installed AVG Antivirus and scanned it
- Repaired and verified disk in Disk Utility.
- Uninstalled Adobe Flash Player.
I hope anyone can help me! I really need my computer for educational use!1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/U.+\/Shared\//b'$'\n''s/(\/Users\/)[^/]+/\1USER/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//g;s/\).*/)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
MacBook Pro has slowed significantly...Ideas on how to fix?
Problem description:
My mac book has become very very slow, when I look in activity monitor i have close to 150 processes, trying to figure out how to fix things.
EtreCheck version: 2.1.5 (108)
Report generated December 25, 2014 at 6:02:49 PM EST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro6,2
1 2.53 GHz Intel Core i5 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics - VRAM: 288 MB
Color LCD 1440 x 900
NVIDIA GeForce GT 330M - VRAM: 256 MB
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:9:17
Disk Information: ℹ️
Hitachi HTS545050B9SA02 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (77.70 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-898 disk2 : (13.6 MB)
disk2s1 (disk2s1) <not mounted> : 12 MB
disk2s1s1 (disk2s1s1) <not mounted> : 32 KB
Endocrine (disk2s1s2) /Volumes/Endocrine : 11 MB (0 B free)
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.9) [Support]
[not loaded] com.aliph.driver.jstub (1.1.2 - SDK 10.7) [Support]
[not loaded] com.devguru.driver.PTUMWDrv (11.1.28) [Support]
[not loaded] com.lge.driver.LGEMobilSolutionFamily (1.5.4) [Support]
[not loaded] com.logmein.driver.LogMeInSoundDriver (1.0.0) [Support]
[not loaded] com.novatelwireless.kext.wwan (3.0.24) [Support]
[not loaded] com.pantech.driver.PTRayUSBFamily (1.2.8 - SDK 10.4) [Support]
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.68) [Support]
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.68) [Support]
[not loaded] com.seagate.driver.PowSecDriverCore (5.0.1) [Support]
[not loaded] com.sierrawireless.driver.SierraDevSupport (2.0.2) [Support]
[not loaded] com.sierrawireless.driver.SierraFSCSupport (2.0.2) [Support]
[not loaded] com.sierrawireless.driver.SierraFSRSupport (2.0.2) [Support]
[not loaded] com.sierrawireless.driver.SierraHSRSupport (2.0.2) [Support]
[not loaded] com.smithmicro.driver.SMSIWirelessModem (3.2.7) [Support]
/System/Library/Extensions/LGEMobileSolutionFamily.kext/Contents/PlugIns
[not loaded] com.lge.driver.LGELTEBus (1.5.4) [Support]
[not loaded] com.lge.driver.LGELTEMdmControl (1.5.4) [Support]
[not loaded] com.lge.driver.LGELTEMdmData (1.5.4) [Support]
[not loaded] com.lge.driver.LGELTENicControl (1.5.4) [Support]
[not loaded] com.lge.driver.LGELTENicData (1.5.4) [Support]
/System/Library/Extensions/NovatelWirelessWWAN.kext/Contents/PlugIns
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (3.0.24) [Support]
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData (3.0.24) [Support]
[not loaded] com.novatelwireless.driver.3G (3.0.24) [Support]
[not loaded] com.novatelwireless.driver.3GData (3.0.24) [Support]
[not loaded] com.novatelwireless.driver.DisableAutoInstall (3.0.24) [Support]
[not loaded] com.novatelwireless.driver.NWVBE (3.0.24) [Support]
/System/Library/Extensions/PTRayUSBFamily.kext/Contents/PlugIns
[not loaded] com.pantech.driver.PantechBus (1.2.8 - SDK 10.4) [Support]
[not loaded] com.pantech.driver.PantechCDFree (1.2.8 - SDK 10.4) [Support]
[not loaded] com.pantech.driver.PantechCm (1.2.8 - SDK 10.4) [Support]
[not loaded] com.pantech.driver.PantechMdmControl (1.2.8 - SDK 10.4) [Support]
[not loaded] com.pantech.driver.PantechMdmData (1.2.8 - SDK 10.4) [Support]
[not loaded] com.pantech.driver.PantechSer (1.2.8 - SDK 10.4) [Support]
[not loaded] com.pantech.driver.QmiDriver (1.2.8 - SDK 10.4) [Support]
/System/Library/Extensions/PTUMWDrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.PTUMWCDFree (11.1.28) [Support]
[not loaded] com.devguru.driver.PTUMWCSP (11.1.28) [Support]
[not loaded] com.devguru.driver.PTUMWDIAG (11.1.28) [Support]
[not loaded] com.devguru.driver.PTUMWMdmControl (11.1.28) [Support]
[not loaded] com.devguru.driver.PTUMWMdmData (11.1.28) [Support]
[not loaded] com.devguru.driver.PTUMWUSBMergeNub (11.1.28) [Support]
/System/Library/Extensions/SMSIWirelessModem.kext/Contents/PlugIns
[not loaded] com.smithmicro.driver.SMSIWirelessCDC (3.2.7) [Support]
[not loaded] com.smithmicro.driver.SMSIWirelessSerial (3.2.7) [Support]
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) [Support]
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) [Support]
[not loaded] com.seagate.driver.SeagateDriveIcons (5.0.1) [Support]
Startup Items: ℹ️
ProTec6: Path: /Library/StartupItems/ProTec6
ProTec6b: Path: /Library/StartupItems/ProTec6b
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[loaded] com.paragon.NTFS.auth.plist [Support]
Launch Agents: ℹ️
[loaded] com.examsoft.softest.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.seagate.SeagateStorageGauge.plist [Support]
Launch Daemons: ℹ️
[running] com.examsoft.softest.service.plist [Support]
[running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist [Support]
User Launch Agents: ℹ️
[loaded] com.koingosw.MacCleanse4Helper.Reminder.plist [Support]
[loaded] com.koingosw.MacCleanse4Helper.TrashWatcher.plist [Support]
[running] com.zeobit.MacKeeper.Helper.plist [Support]
User Login Items: ℹ️
Launch Nikon Message Center 2 UNKNOWN (missing value)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 12.0.0r112 - SDK 10.6 [Support]
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
LogMeInSafari64: Version: 1.0.660 [Support]
Google Earth Web Plug-in: Version: 6.2 [Support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.2.4 [Support]
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
LogMeIn: Version: 1.0.660 [Support]
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
iPhotoPhotocast: Version: 7.0
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
LogMeInSafari32: Version: 1.0.660 [Support]
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 [Support]
JavaAppletPlugin: Version: Java 7 Update 51 Check version
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
Java [Support]
Paragon NTFS for Mac ® OS X [Support]
Tuxera NTFS [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 421.18 GB
Destinations:
Untitled [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 0 B < (Disk used 421.18 GB X 3)
Top Processes by CPU: ℹ️
4% firefox
4% WindowServer
1% mds
0% ocspd
0% fontd
Top Processes by Memory: ℹ️
326 MB firefox
172 MB mds_stores
146 MB Finder
112 MB WindowServer
77 MB MacKeeper Helper
Virtual Memory Information: ℹ️
3.16 GB Free RAM
3.68 GB Active RAM
612 MB Inactive RAM
1.14 GB Wired RAM
1.24 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 25, 2014, 05:54:10 PM Self test - passedHello garycamp88,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your Mac is running slowly, please see the information in the article linked to below.
OS X Yosemite: If your Mac runs slowly
Take care,
Alex H. -
Hey, my macbook pro started going slow out of nowhere and gets the loading wheel often, I can't close it without the charger attached otherwise it heats up real bad. I've been told to get a hard drive and back up everything through time machine and then reinstall it but wouldn't that just carry over whatever problem I'm having. I've tried everything that I've found on here like going into disk utility and repairing anything broken, I checked my memory and all that and it was good but I deleted anything unnecessary and put all my music and movies onto an external hard drive.
If you don't already have backups, and you have any data that you want to keep, shut down the computer immediately and don't turn it on again until you have at least one external hard drive to use for backing up. Then see below.
Mac Basics: Time Machine backs up your Mac -
NEW macbook pro running slow ~ i hate the rainbow pinwheel
i have a two-week old MacBook Pro.
it has been running slow ever since I got it.
the apple genius bar guy pulled up my activity monitor and said it was normal.
how can a constant rainbow pinwheel be normal???
because i use it for business, i had to download Outlook and now i can barely get anything to run without the stupid rainbow pinwheel.
it has 4GB or memory. do I need to add another 4GB or is there something else I can do?
i can't believe how this "powerful machine" feels like i'm trudging in the mud.
thanks for your help.Ok, so I'm pretty new to this and want to make sure I answer each of your questions.
Right now, my computer is behaving (of course)... so I might need to do this again when I've got a pinwheel or beach ball or whatever they call that spinning rainbow torture device. So, the numbers below reflect my computer without the pinwheel (probably not helpful for troubleshooting)....
What is it, and what is the process? ~ Outlook 20.6%
Also post the values for % User, 4.89%
% System, and 8.13%
% Idle at the bottom of the window. 85.03%
What values are shown in the bottom part of the window for Page outs ~ 443.7
and Swap used? 183.7
kernel.log
Feb 22 21:07:21 Stacys-MacBook-Pro kernel[0]: The USB device Apple Internal Keyboard / Trackpad (Port 2 of Hub at 0xfa100000) may have caused a wake by issuing a remote wakeup (3)
Feb 22 21:07:21 Stacys-MacBook-Pro kernel[0]: HID tickle 176 ms
Feb 22 21:07:23 Stacys-MacBook-Pro kernel[0]: Sound assertion "0 == fAudioEngineArray" failed in AppleHDADriver at line 3047 goto Exit
Feb 22 21:07:27 Stacys-MacBook-Pro kernel[0]: MacAuthEvent en1 Auth result for: c0:c1:c0:23:ed:6a MAC AUTH succeeded
Feb 22 21:07:27 Stacys-MacBook-Pro kernel[0]: wlEvent: en1 en1 Link UP
Feb 22 21:07:27 Stacys-MacBook-Pro kernel[0]: AirPort: Link Up on en1
Feb 22 21:07:27 Stacys-MacBook-Pro kernel[0]: en1: BSSID changed to c0:c1:c0:23:ed:6a
Feb 22 21:28:09 Stacys-MacBook-Pro kernel[0]: IOSurface: buffer allocation size is zero
Feb 22 21:29:45 Stacys-MacBook-Pro kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
Feb 22 21:29:45 Stacys-MacBook-Pro kernel[0]: macx_swapon SUCCESS
Feb 22 21:29:54 Stacys-MacBook-Pro kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
Feb 22 21:29:55 Stacys-MacBook-Pro kernel[0]: macx_swapon SUCCESS
Feb 22 21:30:30 Stacys-MacBook-Pro kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
Feb 22 21:30:33 Stacys-MacBook-Pro kernel[0]: macx_swapoff SUCCESS
Feb 22 21:34:16 Stacys-MacBook-Pro kernel[0]: MacAuthEvent en1 Auth result for: c0:c1:c0:23:ed:6a MAC AUTH succeeded
Feb 22 21:34:16 Stacys-MacBook-Pro kernel[0]: wlEvent: en1 en1 Link UP
Feb 22 21:34:16 Stacys-MacBook-Pro kernel[0]: en1: BSSID changed to c0:c1:c0:23:ed:6a
I have no CLUE what I just posted and hope it was what you were asking for. I truly appreciate your help. Thank you so very much. -
It is always very hot when I touch it.
Sometimes it stucked for several seconds.You're fine then....
When I'm using my Macbook it sometimes go up to 60 - 65 C when i'm just browsing and have nothing else open.......
Just check on our activity monitor once in a while when it reaches 80 C and hit quit process on the offending app.
Also check your login items - maybe something is running when your startup your Macbook.....If you see something there and have no need for it to start up, you can safely delete it...
good luck.. -
My 13''macbook pro 2011 don't read the usb
i have an external hdd and it disconect every 10 sec..is a hardware problem?
It's too early to determine if it's a hardware problem, but your only problem is that the HD disconnects, the problem is probably isolated to the drive.
If a HD disconnects every few seconds, it might be a faulty cable...but it's probably due to the fact that the HD needs more power. If you have a powered jack, use that; if not, plug the USB drive directly into your Mac jack - not the USB hub.
If you're still having problems, include the kind of machine you're using, how it's connected to the USB, and when the problem first started happening.
Maybe you are looking for
-
How to create a circle from the centre?
Hi. I'm using PS CS3 and I want to create a perfectly round circle from the centre. How do you do this? I know pressing shift while dragging makes it perfectly round. I've also read that pressing alt at the same time draws it from the centre, but it'
-
No sound on Windows 7 Boot Camp
I've had this problem for a while now, I just ignored it in the past, now I'm really fed up. I've tried everything, downloading Realteck, burning BootCamp drivers onto the CD (I have a Lion which came with no disc), I tried playing around with the So
-
Early 08 MBPro-TCP/IP settings are not saved
On my home wireless network I have MAC address filtering enabled and broadcast SSID disabled. All MAC addresses are entered in the router's filter. An early 08 MBPro does not retain network settings for Verizon router on the network. When I look at t
-
Dear MDM Experts, 1. how can I define views for user groups in MDM? As I saw usage of masks are not too good for this, because when new items come into the repository, the Catalog Manager should everytime renew the masks. Am I right? Can I define din
-
I need upgrade hard drives hp pavilion ze1210
My pc need more space in the hard drive, but i don't know. which is the correct and the maximun for me Laptop. Is a hp Pavilion ze1210,the s.o. is xp , 1gb memory , with 20gb of hard drive installed now. please help me...