MacBook Pro (2011) won't start up

Hi,
Last night I shut down my Mac as usual. But when I wanted to start it up this morning, nothing happened. No sound, no light, nothing.
I have no idea what it could be. I doubt that it's an issue with the charger or battery, since the LED's are still showing full green lights.
I know that an SMC reset could work, but the problem is that the left-shift and I think the left-ctrl keys of the internal keyboard don't work.
This problem was already there before this happened. I've tried with an external keyboard, but no luck. I also read that removing the battery could help.
But then again I have one of the later versions of Macbook Pro, so removing it isn't as easy.
Perhaps I should try to remove and reinstall the battery myself? Any suggestions?
Thanks,
Lisa

LisaV16,
is your MacBook Pro one of the Early 2011 models which originally came with two grey installation DVDs in the box? If so, you could try booting from its Mac OS X Install DVD.
If your left Shift key wasn’t working before this happened, then you should probably make an appointment at your nearest Apple store to have them diagnose these problems.

Similar Messages

  • Data transfer from 08 macbook pro that won't start up to new macbook pro?

    i have a 2008 macbook pro which won't start up properly, although, it will will start up with the Ctrl+T command which to my knowledge allows it to become like an external hard drive.
    my question is, which cable will i need to transfer data to my newer macbook pro that only has thunderbolt connections, and what are the limitations to the files i can move over? basically i need all my document files, iTunes files, and garage band files...

    1. You need a FireWire 800 to Thunderbolt adapter.
    2. All of your personal files can be moved over.
    (109991)

  • My Macbook pro often won't start up since I installed Lion, and I have to shut it down using power button. My desktop icons don't appear and the dock won't open. I only have the little circle of color spinning endlessly. What's wrong now!

    My Macbook pro often won't start up since I installed Lion, and I have to shut it down using power button. My desktop icons don't appear and the dock won't open. I only have the little circle of color spinning endlessly. What's wrong now!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • MacBook Pro (2011) Won't Charge Without Restart

    Hi guys, I searched the forums for this problem but couldn't find a match. When I plug the power cable into my 2011 17" MacBook Pro it won't take a charge and the light on the cable doesn't come on. However if I restart the computer, the light will come on and it will start charging. This sounds like a software issue to me and I haven't had the problem until recently so I'm guessing it's caused by the latest OS X update. Has anyone else experienced a similar issue and found a fix?

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the appropriate method.
    Best.

  • Macbook Pro 2011 won't turn on (RAM issue?)

    (Macbook pro 2011) I had water damage so I sent in to apple for a complete makeover and they pretty much replaced everything. The laptop seemed to be working fine but the issue is that when I put my laptop to sleep / turn off it won't turn back on. I haven't had the time to take my laptop back to the apple store due to projects / travelling. I've found that there is one quick fix, manually resetting the ram by taking the RAM chips out for a second then re-inserting them. The other way is to hold Command+Option+P+R 3 times before reboot and that'll work temporarily for a day maybe. I plan on taking it to the apple store in a day or so if the problem doesn't resolve itself. Do you guys have any suggestions?
    Thanks,

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Also see:
    Reinstall OS X Without Erasing the Drive
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • MacBook Pro 2011 won't boot

    My early 2011 MacBook Pro 15" won't boot. Second time dealing with this this year. Apple Store charged me $300+ to fix it the first time. It worked for a few months, but stopped working again. Took it to the shop again and asked them to fix it for good this time. They wanted to charge me $310. I said NO. why would they charge me twice for a repair I asked them to do before? How widespread is this problem? I know for a fact I'm not the only one dealing with this problem.

    What have you done to define your problem?  Look at this comprehensive troubleshooting article and perhaps you can find a solution:
    https://discussions.apple.com/docs/DOC-3353
    Note that Apple repairs are guaranteed for 90 days.
    Ciao.

  • Late Macbook Pro 2011 won't charge via MagSafe adapter.

    My friends Macbook Pro 2011 same as mine wont charge the battery via MagSafe adapter. The battery is good and the adapter also, ive checked them on my Mac. The problem is that on her Mac it won't charge. I've change the MagSafe adapter on her computer and it didn't work still no charge, no green light on the L shaped adapter. Can it be the Logic Board?

    Resetting SMC could solve the problem.
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

  • MacBook Pro 2011 Won't Detect External Dell Display

    I have a brand new 2011 MacBook Pro, 17" that I use with a 24" Dell E248WFP monitor. I purchased a Moshi HDMI to DVI adapter, and at first everything worked fine--I would use the MBP with the lid closed, everything would show up on the display, and everyone was happy. Then I disconnected my MBP one day and took it somewhere, and when I came back I couldn't get the external display to connect. But then I tried some things and it did. The next time I disconnected my MBP from the display I had problem again, but after 10 minutes of fiddling around it finally worked again.
    Over time, I found that different things would work, but not consistently. That is, sometimes I could merely click on "detect displays" and that would fix the problem. Other times I would put the computer to sleep, then shut the lid and move the external mouse or press a key on the external keyboard, and that would work. Sometimes if I just left it alone for a half hour I would come back and the external monitor would suddenly work for no apparent reason. But it was rarely consistent. What worked one time would not work the next.
    This week, I went somewhere with my MBP, and when I came home I couldn't get it to connect. I have now been trying to fix this for two days and although I have tried hundreds of things I can't get the monitor to connect. Yes, the monitor is on. Yes, the monitor works otherwise and appears to be in fine functioning order.
    I have tried restarting, resetting PRAM, shutting down, starting up with the monitor unplugged and then plugging it in, starting up with the monitor plugged in, shutting the lid while restarting, not shutting the lid while restarting, putting the MBP to sleep and then shutting the lid and then pressing a key on the external keyboard (it wakes up my MBP but nothing comes up on the external monitor), I've verified that the internal and discreet graphic modes are both working, and many other things. I have no idea what else to try, but I do know it doesn't seem to be working.
    What I have not tried is connecting the MBP to a different monitor, but given that I already had problems before wherein the monitor would work, not work, work, not work, etc., I'm inclined to believe it's a software issue with the MBP, as opposed to any hardware problem with the monitor, although I suppose it could be something with the MBP.
    I've examined many other threads from people seeming to have this problem, except none of them seem to have run into such a dead end as I have. And while I would love to have an excuse to buy a 27" Mac display for $1,000, I'd also love to have an excuse not to. If anyone has more things I can try to fix this, please let me know.

    Hi, I'm having the same problem, tried to connect both a Viewsonic and a Hanspree. Was happy to find your response here, but I just got the Moshi adapter with the macbook pro so it seems silly it would have gone bad. :/
    I suppose I'll take it into the Apple Store and see what they say. Thanks!
    ^_^

  • New macbook pro 2011 won't eject cd - jammed? help?

    My macbook pro has a cd inside and it won't show that it has anything inside - but I know its in  there and can't get it out, help!

    Start the computer up while holding down the trackpad button. Hold the button down until the drive ejects the disc.
    If that doesn't work, try this:
    Restart the computer. Immediately after the startup sound, press and hold Command+Option+O+F. Release the four keys when you see a white screen that says "Welcome to Open Firmware." At the prompt, type *eject cd* and press Return. The drive should eject your disc, and "ok" will appear when the action is complete.
    Type mac-boot and press Return to restart the computer normally.
    Here's another method:
    Go to Applications/Utilities and open the Terminal. In a terminal window type *drutil tray eject* and press Return. After the disc is ejected, quit the Terminal.
    If any or all of these methods cause the drive to make its usual eject sound but the disc still doesn't come out, the drive has failed mechanically, and will have to be physically dismantled to recover the disc. If none of these methods causes the drive to make any sound or do anything at all, the drive isn't getting power, and the machine will have to be disassembled to find out why not and correct the problem.

  • My MacBook Pro 13 won't start has white screen and beeps

    I used my MacBook pro lastnight and worked fine. Tried to turn it on this morning and it won't start. Does sound like it is going to then before login screen shows ur goes to a solid white screen and beeps every 7 seconds. Need help school is about to start again.

    Check this out.
    I think you have bad RAM, so either you've recently put in new RAM, knocked some RAM loose from the socket (really hard to do), or the RAM went bad (maybe).
    You might need to see a real tech.
    Upon further review, I think your MBP has a serious problem.  You need to take it to an Apple Store for repair.  If you bought it within the last 12 months, you will be able to get warranty service, as long as you're not at fault. 

  • Macbook Pro 2011 won't detect external display.

    Firstly - I've searched this problem several times now and I've found this problem in four of five discussion topics on this board, each with 4 or 5 pages of people adding "I'm having the same problem" but in all of that there wasn't a single response from Apple, instead they just 'archived' the discussions and hoped that people would just go away.
    That's pretty ******* disgusting customer service, considering the amount of money we're paying for your products. You owe us at least for them to ******* work properly - not just ignore major problems, which are clearly present for quite alot of your customers.
    For months I've had no problems just plugging my MBPro into an external monitor by DVI using the Apple certified DVI-thunderbolt connector.
    For some reason, a few weeks ago, the MBPro stopped detecting the monitor.
    I have to spend about 20 minutes ******* around, unplugging and replugging in the leads, restarting with and without the leads plugged in, resetting the p-ram, reinstalling OSX 10.7 and it always seems to be just a random time when it decides to start working.
    I'm not just some kid ******* around with an expensive computer for the fun of it. I make a living using this system and I need the big screen for the work I do. I don't have the time to spare every sodding day to be ******* around with **** that doesn't work properly.
    At first I thought the problem was restricted to just my work display as it appeared to work fine on all other displays. However, last week I was giving a presentation at work to a company who were potentially about to spend mega bucks giving us some work. I turn on the screen and plug in my computer to show the presentation. Nothing happened. luckily I was able to quickly transfer the presentation to another working computer (a PC) and continue on.
    But seriously, please justify spending over £1000 on a computer that can't perform the simplest of tasks without spazzing out?
    And secondly - stop ignoring this problem and get fixing it. Now!

    Hi, I'm having the same problem, tried to connect both a Viewsonic and a Hanspree. Was happy to find your response here, but I just got the Moshi adapter with the macbook pro so it seems silly it would have gone bad. :/
    I suppose I'll take it into the Apple Store and see what they say. Thanks!
    ^_^

  • Macbook pro 2011 won't sleep

    Hello there,
    I have noticed recently that my early 2011, 15" Macbook Pro no longer goes to sleep when I close the lid, or when I select sleep in the Apple menu. When I close the lid or select sleep, the screen turns off, but I am still able to hear the fans spinning. Also, the white led on the front of the laptop does not pulsate like I usually does when asleep. I have also noted that when I close the lid, and then open it again later, the screen comes back on briefly and then goes blank. I have to push the brightness controls to get it to come back on. There have been a couple of occasions where the laptop does sleep properly.
    Any help would be greatly appreciated
    Many thanks

    It is more then like a program running in the background that is causing it not to go to sleep. Or it could be corrupted OS file/s.
    It's hard to tell without having the machine in front of me.

  • The recent firmware for Macbook Pro (2011) won't install

    MacBook Pro SMC Firmware Update 1.7
    I tried to install this but all I got was the gray screen of doom. After 12 hours of the gray screen, unplugged and let the battery run down. Macbook booted up (yay) and the software update says it still needs to be installed.
    Should I just skip it and play the rare odds?
    Thanks.

    I had this same problem, but stopped it after 2 1/2 hours.  I did a hard shutdown (held down the power button until it powered down),  waited a few minutes and then started it back up.  Thank goodness the MBP came back.  Must be something wrong with this update.  Wonder if Apple knows about it?  Do their techs watch this forum?
    First time I've had problems like this installing an Apple update.

  • MacBook pro 2011 won't turn on completely

    My MacBook pro was running slow today so I decided to turn it off and turn it back on. Now it will not turn on anymore. It starts to turn on, the apole logo appears with the start up line underneath it and begins to load however it just stops and shuts off. It has done this everytime I have tried for the last hour. I believe I have the most up to date os so idk what is going on please help!!!! I need it especially since finals start next week!

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Also see:
    Reinstall OS X Without Erasing the Drive
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • I spilt milk on MacBook Pro, it won't start - what can I do? (I've left it alone for awhile)

    A small amount of milk spilt on the top of my MacBook Pro (I bought it new about three months ago). It almost immediately shut off and it refuses to start, even having left it for 30 hours in an attempt to allow it to dry out. My question really is where should I go with this next? My nearest apple shop is a train journey away, and I was wondering if it can even be repaired - I don't want to lose all of my files.
    Thanks,
    Richard

    Richhii wrote:
    A small amount of milk spilt on the top of my MacBook Pro (I bought it new about three months ago). It almost immediately shut off and it refuses to start, even having left it for 30 hours in an attempt to allow it to dry out. My question really is where should I go with this next? My nearest apple shop is a train journey away, and I was wondering if it can even be repaired - I don't want to lose all of my files.
    Thanks,
    Richard
    If the drive can be removed you may be able to recover from it when connected externally to another Mac, if not and if you are not backing up your Mac be prepared to lose all of your files. You will also need to buy a new Mac (do you have insurance)

Maybe you are looking for