MacBook Pro 2012 13" and apple remote (a1156 white)

Hi!
I have a macbook pro 13 (2012) model and i want to know did the white apple remote a1156 will work with it. ?
Apple remote
Thank's John

Have anyone try to do this ?
I want to use it for keynote presentation. On my Mac i have installed Mountain Lion.

Similar Messages

  • Can my mid 2012 macbook pro 13 inch use apple remote?

    Can my mid 2012 macbook pro 13 inch use apple remote?
    - i knw the MBPR has no IR but does the none retina ver MBP have IR?

    yes it can

  • No synchronisation between MacBook Pro 15" Retina and Apple LED Thunderbolt Cinema Display 27"

    If I start my Retina MacBook with connected Apple 27" Monitor via Thunderbolt, I can notice less a second a blue Screen on both devices and then both Displays become black, since I installed Mountain Lion (10.8.2); the time before (Lion 10.7), the synchronisation was ok and everything is okay with my 13"-Apple AirBook (Lion 10.7) also.
    Now, when this happens and I  move down the Display of my 15" MacBook Retina, I can see everthing on the 27" monitor. With an extern mouse, I can work quite well (without the MacBook-keyboard, because the Display is closed). I didn't try an extern keyboard till now. I only can move the pointer of the ext. mouse visible on both screens.
    When I connect a further monitor via HDMI to my MacBook Retina, everthing is okay and I can watch 3 Displays !!!
    When I turn off (the third still HDMI-connected Monitor), I can continue working with 2 Displays - Mac Book and 27"-Apple monitor, everthing is ok.
    If I disconnect the 27" Monitor, I can continue on the MacBook without a problem. If I connect the Apple-Monitor via Thunderbolt again, the Problem comes again.
    Why I can't  find a synchronisation between my 15" MacBook Retina (Mountain Lion 10.8.2) and my Apple 27" Monitor (baught in August 2012)????
    Herbert

    stevejobsfan0123 wrote:
    ... Some sites like eBay have a Buyer Protection Plan.
    True, but eBay's policies are now totally lopsided in favor of buyers. So much, that there are far more sellers getting scammed these days.
    Buyers hold all the cards with eBay.
    Here's an ebay search. The lowest completed listing prices are within 10% of Apple's... about what you can get with an educational discount anyway. After listing / final value fees and Paypal fees, at those prices sellers are losing money.
    Why? Hmm...

  • I have a MacBook Pro 2012 running Mountain Lion 10.7.5 and the mirroring icon isn't showing up to stream to Apple TV

    I have a MacBook Pro 2012 running Mountain Lion 10.7.5.  I've been trying to get the mirroring icon to show up in the bar but no dice.  Any tips?  I've gone into System Preferences -> Display and there is no option to turn on mirroring.

    Welcome to the Apple Community maricespieces.
    AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). You can see which Mac you have and which operating system you are using by selecting 'About this Mac' from the Apple menu in the top left corner of your Mac and selecting the 'More Info' button.

  • My macbook pro 2012 mac os x lion 10.7 stuck at apple logo with spinn wheel

    my macbook pro 2012 mac os x lion 10.7 stuck at apple logo with spinn whell and i held it for hours nothing happend so i tried to boot from recovery hd so i started mac and pressed option key ...so a screen appears telling recovery hd with bar for wifi connection selection then i put my wifi details and choose roc. hd it again booted with same apple logo with spin wheel...what to do now ....i haven't tried reseeting pvram..etc nvram..

    Hi there lakra,
    You may find the troubleshooting steps in the article below helpful.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/ts2570
    -Griff W. 

  • Contacts Sync - I have my contacts on iphone5 and MacBook Pro 2012.  I just purchased a MacBook Air 2013 and want the same contacts on that device.  What is the best way to do this?  Non-techie.  Thanks

    I have my contacts on iphone5 and MacBook Pro 2012.  I just purchased a MacBook Air 2013 and want the same contacts on that device.  What is the best way to do this?  Non-techie.  Thanks

    Follow the instructions for enabling your iCloud account on the MBAir here >  Apple - iCloud - Learn how to set up iCloud on all your devices.

  • I want to buy a new macbook pro 2012, can i sell my old macbook and put some more money to buy the new one???

    I want to buy a new macbook pro 2012 with retina display, can i sell my old macbook and add some more money to buy the new one???
    Is there any deal like this?

    Apple has a rebuy and recycle program, but you won't get much for your old MBP from that program. Your best bet is to just sell it yourself (I used eBay) and use the money you get to buy your new computer.
    Good luck,
    Clinton

  • HT4199 My Macbook Pro 2012 keeps dropping wifi every now and then, any suggestions?

    I have Macbook Pro 2012, since purchase, it keeps dropping wifi connection.  I have other apple and non-apple devices those does not have this issue.  Any suggestions?

    I have the same problem. I had the issue with mac osx 10.8.2 and after updating to 10.8.3 it still drops the wifi connection constantly. It is so annoying and other devices (e.g. my iPhone 5 works fine). I have a 2012 MacBook Pro retina. Hope anybody has a solution

  • Can I take RAM from MacBook Pro 2012 and install in MacBook 2010

    I am upgrading a MacBook Pro 2012 from 8G to 16GB of RAM
    Can I take the old 2x4G RAM DIMMS and install them in my daughters White MacBook 13" 2010 (7,1)
    Thanks...

    Your 2012 tech specs state 1600 MHz:
    http://www.everymac.com/systems/apple/macbook_pro/index-macbookpro.html
    whereas the 2010 white Macbook takes 1066 MHz:
    So, the answer would be no.

  • Hey, for some reason i turned on my macbook pro 2012 and it says i have no internet access. I then found out that it also says that my self assigned ip address will not connect to the internet. How is this and how can i fix it?

    hey, for some reason i turned on my macbook pro 2012 and it says i have no internet access. I then found out that it also says that my self assigned ip address will not connect to the internet. How is this and how can i fix it?

    Reset your modem.

  • HT1420 I have 5 computers already authorized with my Apple ID.  How can  I add one more.  My home has 1 IMAC, 2 Macbook Pros, 1 Ipad and 2 Iphones.  Why are you now limiting me to five computers on my Apple ID when I am clearly an Apple product supporter.

    I have six products in my home.  I can only authorize five using my Apple ID.  All my products are Apple - 1 IMAC, 2 MacBook Pros, 2 Iphones and 1 IPAD.  This doesn't seem right - We are so Mac'd out in our home and yet we are now being limited to the number of products we can have using the same Apple ID.  Any advice as to how to find a workable soliution to this?
    Thanks

    Authorise Only Applies to Computers... Not Devices...
    You state you have 1 IMAC, 2 MacBook Pros, ... this = 3 Computers... you can Authorise up to 5 computers.
    See Here for full details...
    About authorization and deauthorization
    For Devices...
    See Here...
    iTunes Store: Associating a device or computer to your Apple ID

  • Can I have an iPhone, ipad and MacBook Pro with the same apple id

    Can I have an iPhone, ipad and MacBook Pro with the same apple id. When I use I tunes it get confusing and I have a paid app that needs the same id

    When syncing the iPhone and iPad with iTunes on your computer that is logged in with the Apple ID you plan on using on all three, the Apple ID should be transferred to the iPhone and iPad for the iTunes & App Stores on each device. If not, you'll need to sign out of the existing Apple ID on the iPhone and iPad followed by signing in with the Apple ID you want to use on both.
    Keep in mind that all 3rd party apps include DRM protection which is tied to the iTunes account or Apple ID that was used to download the apps. With an app installed on your iPad and iPhone that was downloaded with a different Apple ID from the one you will be using now, you will need to use that Apple ID and password to install app updates for those apps. Not possible to transfer apps purchased with one Apple ID to another or to merge Apple IDs.

  • I run Quickbooks in my desktop (mac) at home and want to access it while I'm away from my Macbook... Will Apple remote Desktop 3 enable me to do this?

    I run Quickbooks in my desktop (mac) at home and want to access it while I'm away from my Macbook... Will Apple remote Desktop 3 enable me to do this?

    Work with and store the documents on DropBox or something similar. It's free for DropBox. All you need after that is access to the internet and regardless of where you are and what you're using you have access to your documents.

  • Have a problem with my MacBook Pro.5,3 and monitor.  Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture.    The Apple icon, usually at top left corner, appears in to

    have a problem with my MacBook Pro.5,3 and monitor.  Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture.
    The Apple icon, usually at top left corner, appears in top right corner  in a strip including all that left hand.  When the computer is restarted, the screen goes back to normal.  But I have to move the mouse to the far left of the screen and then up until it reappears on the far right hand side of the screen so that I can hit shut down button.
    It seems to happen randomly though always on desk top and sometimes when I move mouse and computer switches on from rest mode.   My large flat screen is relatively new.
    The video card on this computer, which is approximately two years old, is Nvidia FeForce 9400M.
    Any help would be welcome as my usual source of assistance is not available and I am not well versed in workings of the Mac although I have used one for many years.

    That sounds like a Hardware problem.
    You may be able to confirm that with Apple Hardware Test, or make an appointmenst for a free Genius Bar evaluation.

  • Can I connect a G5 tower and Macbook Pro to one 30" Apple Display Monitor?

    I would like to know if it is possible to connect a G5 tower (older power pc) and a new Macbook Pro to one 30" Apple Display. If so, how would I do this? Thank you.

    <http://www.kanexlive.com/snapx>
    (Will not work with Thunderbolt display.)

Maybe you are looking for

  • Transport FG from Quality to Production

    Dear All, I have created couple of function group and transported to Quality system. Now as per the requirement I have made the changes in different FM of these FG as well as includes. So there are few versions in DEV system. Now finally i want to tr

  • Geocode Error while creating Business Partner in Audit Management

    Hi All, When I try to create business partner in PLMD_AUDIT and assign it to various partner roles like Auditor, Responsible person etc. I am getting error as " Geocoder SAP0: Country specification is (Customizing) " What should be done to avoid this

  • Submit button - "Unknown Error" message in acrobat

    I have created a fairly large form. The submit button works in designer PDF preview, but if I open the form in acrobat and press the submit button it pops up a dialogue that says "Unknown Error" and the address I am sending the XML to. This still hap

  • Can I get handle to Database Row before an entity is deleted

    Hi, We are using stored procedure to list, insert , update and delete entity objects.To use the stored procedure I override the default queries generated by Toplink and make use of the stored procedure query.The issue here is that my Stored Procedure

  • Need help with this query

    Hi, I am using SQL Server 2008 Enterprise edition 64 bit on Windows serer 2008 enterprise edition 64 bit. The below query works fine. I am trying to rewrite the code without using the sub query. In the end i should get the same results for both the q