Macbook pro 2012 bluetooth problem with magic mouse

I have a MacBook Pro 2.6 GHz Intel Core i7 running Mac OS X 10.7.4
It's two days old and Bluetooth has stopped working.. I use bluetooth for my apple magic mouse.
I know it's the Bluetooth app and not the mouse as I changed the mouse batteries and double checked it with my old iMac.
The Bluetooth app has become sluggish and unresponsive.
I have restarted and logged out and in.
Run permissions.
Switched Bluetooth off and on.
Scratched my beard.
Any ideas or similar problems?

Not sure which Bluetooth app you are referring to ...
Try deleting Bluetooth preferences ...
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
/LIbrary/Preferences
Click Go
Move the com.apple.Bluetooth.plist file from the Preferences folder to the Trash.
Now open System Preferences > Bluetooth and try re "pairing" the mouse.

Similar Messages

MacBook Pro 2012 hinge problem with single click sound when i open it

when i go to sleep and shut my macbook off and close the screen next morning i open my screen and i hear a single click noise??
im paranoid ita a brand new macbook its not a hard drive fail it just a single click sound when i open it to turn on
and heres a video of the hinge is this is whats causing the single click sound? http://www.youtube.com/watch?v=wEUt2p783nA

I have this problem too with my Mid-2012 MBP non-retina. The screen would click once, after being left for a long time, and would be fine after that, until you close it and re-open it again after a long time. It is especially loud in the morning so I think it is temperature dependent. Happened about 3 months after buying. I took it to Apple. First time they replaced the entire screen. They had to since that is the only way to replace the hinge. When I got it back, the screen still clicks. Took it back to Apple again. Second time they just tightened the screws securing the display with the unibody. When I got it back the second time, the screen still clicks. Took it back to Apple again. The third time they replaced the entire screen AGAIN! When I got it back, the problem was fixed for 2 days, then the screen started clicking again so I'm back to square one. I'm wondering whether I should take it to Apple the forth time, but then again, they've already replaced the screen twice which didn't work so I'm not sure what more they can do. It's either this is normal, which implies the screen hinge is really badly designed or the clicking has nothing to do with the screen at all.

MacBook Pro update to Yosemite breaks Magic Mouse

Installed Yosemite today. Magic Mouse instantly broken. It does connect sometimes, but the tracking is sluggish and gestures don't work at all. Worked fine in Mavericks. Batteries @80%.
Re-pairing does NOT work for me. zaping PRAM does NOT work for me.
MacBook Pro (Retina, 15-inch, Early 2013)
2.7 GHz Intel Core i7
16 GB 1600 MHz DDR3
NVIDIA GeForce GT 650M 1024 MB
Is there a solution, patch? How can this be so terribly broken?

Hello,
The problem persist. I have this problem on a macbook pro 13" retina display. Upgraded to Yoseminte and big problem, my Apple Magic did not working anymore. After i replace batteries, restart mac, turn off turn on bluetooth several times, i connect the mouse. But guess what? After i close the lid and i go home, when open the mac again, surprise: NO MOUSE.
Please be serious and get an answer to this issue, both are your products, if APPLE products get errors of communications, what I should expect from others.
People buy Apple for commodity and for less number of problems, in fact Apple products are not so good as you think. So if you have problems like I cannot connect a mouse with a Macbook Pro, then Apple fail.
Guess what, in your Apple stores, people who maybe know some english, don't know to solve this problem, and they told me is a personal problem.
For sure I have personal problem with my mouse...
Thank you for testing Yoseminte before official Launch.
With respect,
Shanaki

Problems with magic mouse and wireless keyboard at the same time

I have a Macbook pro 15" mid 2009, with lion 10.7.3, i bought a magic mouse and small wireless keyboard Apple, but when i'm working with both devices at the same time, the magic mouse begin to do something wrong, the left click work as left click, and i have to turn off the keyboard, wait for a while and then the mouse work good, the keyboard work good alone and mouse too, but at the same time no.
What do you think about rarely issue?
Thanks.

Hello:
Try trashing a preference file (com.apple.bluetooth.plist) and restarting.
Barry

Why Does Retina MacBook Pro (2012) Suddenly Hibernate With Lid Open?

I'd like to know why my Retina MacBook Pro (2012) at certain times suddenly go into Hibernate mode when I'm actively using it with the lid open and what I can do to prevent this.
I know this is hibernate because of what I see in the Console logs and the fact that I can't trigger a wake by using the keyboard/trackpad/mouse. Only the power button causes it to wake up.
This usually happens when I wake it from sleep and plug it into an external monitor via HDMI to HDMI connection.   The lid is open and I use both displays.    This happens about 30 seconds to a minute after I wake from sleep. At the time I'm not plugged into the power supply because I believe it's generally a good idea to let the batter drain and the recharge it. The last time this happened it was about 35% to 40% charged.
Hardware Overview:
Model Name:    MacBook Pro
Model Identifier:    MacBookPro10,1
Processor Name:    Intel Core i7
Processor Speed:    2.6 GHz
Number of Processors:    1
Total Number of Cores:    4
L2 Cache (per Core):    256 KB
L3 Cache:    6 MB
Memory:    8 GB
Software:
OS X Yosemite (all latest updates installed)
{some 3rd party software}
Let me know if you need more information.
For the gory details of what I see in system.log, read on:
This is about the time the hibernate happens. I've replaced my laptop's name with {COMPUTER NAME}
Mar 20 18:29:26 {COMPUTER NAME} identityservicesd[375]: <IMMacNotificationCenterManager: 0x7f87d510c9e0>: notification observer: com.apple.iChat   notification: __CFNotification 0x7f87d5210a90 {name = _NSDoNotDisturbEnabledNotification}
Mar 20 18:29:26 {COMPUTER NAME} identityservicesd[375]: <IMMacNotificationCenterManager: 0x7f87d510c9e0>:    NC Disabled: NO
Mar 20 18:29:26 {COMPUTER NAME} identityservicesd[375]: <IMMacNotificationCenterManager: 0x7f87d510c9e0>:   DND Enabled: YES
Mar 20 18:29:26 {COMPUTER NAME} identityservicesd[375]: <IMMacNotificationCenterManager: 0x7f87d510c9e0>: Updating enabled: NO   (Topics: (null))
Mar 20 18:29:26 {COMPUTER NAME} WindowServer[218]: device_generate_desktop_screenshot: authw 0x7fba81c2e940(2000), shield 0x7fba81c35bd0(2001)
Mar 20 18:29:27 --- last message repeated 1 time ---
Mar 20 18:29:27 {COMPUTER NAME} WindowServer[218]: device_generate_lock_screen_screenshot: authw 0x7fba81c2e940(2000)[0, 0, 1920, 1080] shield 0x7fba81c35bd0(2001), dev [1920,1080]
Mar 20 18:29:27 {COMPUTER NAME} com.apple.xpc.launchd[1] (com.apple.xpc.launchd.domain.user.502): Service "com.apple.xpc.launchd.unmanaged.loginwindow.72" tried to hijack endpoint "com.apple.tsm.uiserver" from owner: com.apple.SystemUIServer.agent
Mar 20 18:29:30 --- last message repeated 1 time ---
Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: PM response took 4741 ms (30, powerd)
Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: ARPT: 1632.007298: AirPort_Brcm43xx::powerChange: System Sleep
Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: ARPT: 1632.007302: wl0: powerChange: *** BONJOUR/MDNS OFFLOADS ARE NOT RUNNING.
Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: [0x1b014fb000, 0x19000000]
Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: [0xd8ec7000, 0x19000000]
Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: [0x1369ac0000, 0xe000000]
Mar 20 18:29:30 {COMPUTER NAME} kernel[0]: [0x0, 0x0]
Mar 20 18:29:31 {COMPUTER NAME} kernel[0]: hibernate image path: /var/vm/sleepimage
And when I wake it up by repeatedly pressing the power button:
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: hibernate_newruntime_map time: 0 ms, IOHibernatePollerOpen(), ml_get_interrupts_enabled 0
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: IOHibernatePollerOpen(0) 19 ms
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: hibernate_machine_init reading
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: PMStats: Hibernate read took 355 ms
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: hibernate_machine_init pagesDone 212628 sum2 2c66736a, time: 355 ms, disk(0x20000) 447 Mb/s, comp bytes: 57749504 time: 55 ms 985 Mb/s, crypt bytes: 157388800 time: 67 ms 2228 Mb/s
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: Wake reason: EC.PowerButton (User)
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: vm_compressor_fastwake_warmup (7450 - 12878) - starting
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: Previous sleep cause: -60
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: Previous shutdown cause: 5
Mar 20 18:30:09 {COMPUTER NAME} kernel[0]: AppleThunderboltNHIType2::prePCIWake - power up complete - took 0 us

This happened again at about 31% power, again unplugged.   Previously, I had plugged in the power before pressing the power button, but this time I pressed the power button before plugging in. The display showed me the out of power icon. Only on plugging it back in was I able to power up the laptop again.
Is it possible there's a bug either with the displayed power or how remaining power is detected?

Connections problems with magic mouse

I keep losing the bluetooth connection with my Magic Mouse, magic track pad and apple bluetooth keyboard.
Magic Mouse problems are daily. Sometimes it works intermittently. Track pad problems are less frequent.
The keyboard gives me problems with the shift key. When I hit the shift key sometimes it causes texts to be highlighted on screen. When texts are highlighted on screen, they are erased once I hit a new key. This is extremely frustration. Any solutions?

Usual first attempt for a remedy for these BT problems is to try smc and pram reset.

IMac 27" i5: Bluetooth Enabler Driver Problem with Magic Mouse and Keyboard

So I just got my iMac 27" Quad Core i5 computer and was able to succesfully install Windows 7 64-bit (using this guide to get past the blank screen problem http://discussions.apple.com/thread.jspa?messageID=10533092). I then installed the Boot Camp 3 drivers from the Mac OS CD and updated windows via Windows Update. Everything seemed to work well.
I even had right click and scrolling capabilities with the MAGIC MOUSE! Also, all the keys were functional on the wireless keyboard.
However, after a few minutes of use the keyboard and mouse would hang and get stuck and I would have to do a hard reboot of the machine. I uninstalled the Apple Bluetooth drivers from the Add/Remove Programs menu and it fixed the problems with the devices getting stuck. However, function keys on the keyboard (brightness, volume, etc.) and scrolling in the Magic Mouse now not work. Is anyone else having this problem?

I found a solution, and everything now works! I followed step three in this discussion http://discussions.apple.com/thread.jspa?threadID=2221427&tstart=0 which says:
Disable power management for Bluetooth Radio. Open device manager, open Bluetooth Radios and right click on "Apple Bluetooth". Select the "Power Management". Uncheck "Allow the computer to turn off this device to save power".

Safari update - problem with magic mouse

Hi all, I recently installed safari update to 5.1 (6534.50) on a mabbook pro OS X 10.6.8. Ever since update, I've been experiencing the problem with safari reloading pages and kicking me out of websites that use flash player (back to log-in screen). I can deal with that by using another browser, however the update has really messed up my magic mouse. At first, every time I put my macbook to sleep or shut it off, the mouse would stop responding when I woke the mac up. I would have to disconnect the mouse and reconnect. But this was really eating up my batteries, so this morning I shut the mouse off when I put the mac to sleep. Now it won't connect at all. Anybody have any suggestions? Thanks in advance for your help!

Thanks Carolyn and Barry,
I did what Carolyn suggested - moving the .plist file into the trash. I have not resetting the PRAM or SMC yet.
When I go to system preferences>Bluetooth, I get a screen that says:
Bluetooth power is off. To use Bluetooth, first you must turn it on. (Note - my mouse is turned on)
Both ON and DISCOVERABLE are checked.
In the middle of the screen, it says No Devices (Set Up New Device...)
When I select set up new device, it finds my device and attempts to pair but is unsuccessful.
Resetting the SMC and PRAM scares me. After reading the links that Carolyn provided, I remembered another weird issue I had with my mac shortly before the update and mouse issue. For some reason, my clock suddenly became out of sync and I was on a 2000 date. I got an error message and reset the clock manually. Could this be the cause of my mouse issue? I feel like every step I've taken to get my mouse working again has made the problem just a little bigger!
Thanks again for helping me!
Judy

MacBook Pro dropping bluetooth connection with HP Officejet 100

I've recently started developing problems with my MacBook Pro (OS X 10.7.4) maintaining a bluetooth connection with my HP Officejet 100 Mobile Printer.
The problem I'm seeing is that when I send something to the printer, everything starts out okay, but then after about 10 seconds, the bluetooth icon in my status bar indicates that it is no longer connected. The printer pauses for a minute or so and then spits out the half-printed page.
Anybody else seeing this? Any suggestions on how to fix?

I have a similar issue, albeit a different bluetooth printer from yours.
According to a review on CNET's website, the dropping of bluetooth connections seems to have been introduced in the 10.7.4 update and did not exist in the 10.7.3 version of the Mac OS X Lion software.
MacBook Pro with Mac OS X 10.7.4 (Lion)
Canon Selphy ES30 with Canon BU-30 USB bluetooth adaptor

Problem with Magic Mouse pairing

Hello Apple Support Communities
I have used a Magic Mouse for some time, maybe now an year. But I started having this problem today.
When the Magic Mouse did not connect with my MBP, I removed the mouse from the Bluetooth and tried to put it back.
But the Bluetooth Setup Assistant is saying that the pairing did not work, and asked for a passcode or a different pairing method.
Here's a screenshot:
Also, I tried using the System Prefrences and click on mouse to set up my Magic Mouse, but it said the same thing; pairing failed.
Here's a screenshot:
Is there any solutions to this problem? I hope that you can get me an answer fast, as I use Magic Mouse a lot with my MBP.

Not knowing what machine you have, it's age, and its current OS X and version doesn't help people help you. Please could you fill in your profile.
Do you have, or know someone who has a wired mouse?

Problems with Magic Mouse, OS 10.9.2 with Mac Mini (mid 2010)

My mouse connects fine to the computer but I can´t use any magic movements at all. What can be the problem? I use Magic Mouse, OS 10.9.2 with Mac Mini (mid 2011).

Troubleshooting wireless mouse and keyboard issues
OS X: Bluetooth devices become unresponsive

MacBook Pro (2012) running slow with loud fan?

My 2012 MacBook Pro has all of a sudden being running very slow while running the fan really loudly even though the computer is not hot? I have done the SMC reset, and checked the disk for any problems and both have not changed anything. I have checked the activity monitor and it says 433 GB free and my CPU seems to low in all applications as far as I can understand. I am out of the country so I cannot bring it into an Apple store so I'd appreciate help that I can do myself! Thanks.

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Otherwise, take the steps below when you notice the slowdown.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Connection problems with Magic Mouse and handoff

I did a clean install of 10.10.3 and since then the Magic Mouse has had problems connecting. First it wouldn't pair. After a few reboots and repeated attempts I was able to pair the mouse with the rMBP. After waking from sleep it now no longer connects. I select the mouse in the Bluetooth menu and connect. Connection appears on the screen, but the mouse doesn't respond. After a few moments I get Connection Lost on the screen.
In addition to the mouse problems I have completely lost any hand off capability to or from the iPhone to the rMBP or back. It's like the Bluetooth connection between the devices is not working or is too weak to function.
It would be very much appreciated if any one has any suggestions on the cause or to a solution.
Thanks.

Hey Tom,
NVRAM and PRAM are, while technically different, effectively the same. Newer systems utilize NVRAM to store the same information that was stored in PRAM on older Macs.
On older Mac computers, similar information was stored in Parameter RAM (PRAM). Resetting NVRAM on Intel-based Macs using the same key combination is like resetting PRAM.
How to Reset NVRAM on your Mac
https://support.apple.com/en-us/HT204063
Cheers,
Allen

MacBook Pro 11/2007 problem with SSD OCZ Vertex Series 250 GB

Hi,
you can read my detailed problem in the OCZ board here:
http://www.ocztechnologyforum.com/forum/showthread.php?t=64941
The short version:
- I bought an OCZ Vertex SSD with 250 GB for my 2 years old MacBook Pro
- System Details: MacBookPro3,1; Boot Rom: MBP31.0070.B07; CPU: Intel Core 2 Duo 2.4GHz; SMC: 1.18f5
- The first 250 GB OCZ SSD was an firmware 1.3 and I could install it with Snow Leopard very easy. After 2 days the HDD just disappeared and it also didn't work in an other PC with an internal SATA port and also not with an external disk with sata to FireWire / USB
- I RMA'ed the disk with OCZ and received a new one with firmware 1.4. I tried to install the computer from scratch and it couldn't write the partition when the SSD was connected to the internal SATA port of the MBP. I used the external SATA to USB and formated the disk with another mac. Then I could install SL from scratch but after some hours the computer began to stall and after the reboot it tried to run fschk and I got the error: "kernel[0]: disk0: I/O error."
(again: Further details please have a look at the link above)
- When I boot the system through firewire with the SSD connected through SATA to Firewire it works like a charm but that doesn't make sense (Having a MBP with an external boot drive)
- I RMA'ed the disk again and last week I received the third one but it had the exact same problem.
So now OCZ told me to ask apple for a possible solution. Does anybody have an idea what to do?
I've read two posts about OCZ problems and they wrote about efi 1.7 problem and with efi 1.6 it would work. Didn't try it out yet - should I?
Thanks for you help!
--Goetz aka Tankmann

No ideas?

I have new macbook pro 2012, after reimage with mountain lion new version image its locked by firmware password(i have the password but the password not accepted) and its just freeze at apple icon and doesnt boot to OSx, how to make it working?

macbook pro seem not working, not either go to startup screen just freeze on apple icon.
and cannot also password for firmware are wrong when i type it in.
how can i know the keyboard problem if the password are confirm right?

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Macbook pro 2012 bluetooth problem with magic mouse

Similar Messages

Maybe you are looking for