MacBook Pro 2012. Replaced hard drive yesterday by apple. Went home working and now it turns off and won't come back on till I plug it in... Help!

Have had a ton of issues with my Mac. Went to the apple store in march and they said my processor could be going bad and they basically did nothing. Yesterday I was using my computer put it to sleep. 10 minutes later I opened it up and it completely crashed. Drove 2 hours to get to apple because I am away at school and need my computer for finals. They replaced my hard drive and it was working perfectly fine till today. Now it turns on and works and then shuts off and it won't come back on till I plug it in. It's completely charged and I need it for my classes. I have apple care but I can't keep driving back to apple every day. I have a apple appointment tomorrow but this is ridiculous. Has anyone had any of these issues? What's it going to take for them to replace my computer I can't even live a day without it right now. And by the way. I could not even get any of my data off my old hard drive. So basically nothing is on this computer right now.

Kak4k8 wrote:
I have apple care but I can't keep driving back to apple every day. I have a apple appointment tomorrow but this is ridiculous. What's it going to take for them to replace my computer I can't even live a day without it right now.
Let them know how this is inconveniencing you. For a replacement, I believe Apples general rule of thumb is if it comes in for the 3rd time for the same issue they will replace it, but it may vary by store. It cant hurt to ask for a replacement.

Similar Messages

I just replaced the hard drive on my macbook pro, reformatted new hard drive and copied over a backup from time machine now I have a kernel panic message (you must restart) - what do I do now?

i just replaced the hard drive on my macbook pro, reformatted new hard drive, installed a back up from time machine and now have kernel panic ( you must restart your computer) what do I need to do?

If you're able to boot, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents – the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all.

I tried transferring my iphoto library from my old macbook onto my new macbook pro (via external hard drive), but when i open the new iphoto, it seems to have transferred ALL images ever used on my old macbook. so i tried to just del

i tried transferring my iphoto library from my old macbook onto my new macbook pro (via external hard drive), but when i open the new iphoto, it seems to have transferred ALL images ever used on my old macbook. so i tried to just delete all those images so i could try a different approach to transferring, but the new iphoto won't let me do anything and every time i try to delete anything it crashes (since the image amount is so high). please help!!
MacBook Pro, OS X Mountain Lion (10.8.2), iphoto '11, version 9.4.2

To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.

How do i copy files from my macbook pro to my hard drive? These files were previously started on my old dell.

how do i copy files from my macbook pro to my hard drive? These files were previously started on my old dell.

More then likely that external drive is formatted the Windows NTFS format which Mac OS X can Read but it can not Write to that format. So you would need to copy all the data off that drive, to either a Windows PC or to your Mac, thenn use the Mac to format it for the Mac OS. Which would be Mac Extended (Journaled) with a Partition Table of GUID.
If you want to use that drive on both Mac and PC then you would need to format it either FAT32 or exFAT.

Using Carbon Copy Cloner which is quicker firewire 800 Macbook Pro to external hard drive or Macbook Pro to same via Airport Extreme?

Using Carbon Copy Cloner which is quicker firewire 800 Macbook Pro to external hard drive or Macbook Pro to same via Airport Extreme?

Firewire 800 is the fastest and most reliable. Also it's bootable if you hold the option key down on a wired or built in keyboard. Not bootable via Airport obviously or if Filevault is used.
It's only your first clone that's usually takes the longest, it's shorter when it updates as you only do the changes which you can control to keep a pure clone if you wish.
Most commonly used backup methods

I am a dj and my macbook pro 13inch 500g hard drive is almost maxed out. i want to upgrade to a 1tb HDD. what is my best option?

i am a dj and my macbook pro 13inch 500g hard drive is almost maxed out. i want to upgrade to a 1tb HDD. what is my best option?

Depending on the year of the MBP, the hard drive may not be considered a user replaceable item...but you can check the available 1 TB drives at good sources such as OWC, http://www.macsales.com they are great to deal with and have on-line videos showing how to do most installation tasks.

I bought new Macbook Pro 13" around two months before .My Apple ID is working on all other things except app store . It is buffering for a lot of time and lastly coming on screen " can not connect to app store " Please help me

I bought new Macbook Pro 13" around two months before .My Apple ID is working on all other things except app store . It is buffering for a lot of time and lastly coming on screen " can not connect to app store " Please help me

Have you tried repairing disk permissions : iTunes download error -45054

How I can back up my data from macbook pro that its hard drive seems to die soon?

     I need your help guys from the whole world.
I am now in Erbil (North Iraq) and there is no apple authorized resellers or anyone who can fix macs, they can destroy them as they try to repair it ( this is what happened      to me recently with My I phone and I pad). So I am left alone to fix it with your global help I hope.
The issue is, I didn't do back up on my mac book pro for over a year. I woke up 3 days ago, switched my mac and there was this funny pinc ponc noise coming from the lower right hand side of my mac (between track pad and keyboard), the computer was going slow and I wasnt able to do anything even after few restarts. It is always too slow to perform anything and this noise always start after few seconds of starting and keep going. the computer can still function very well on guest account *(safari only) and I don't hear the noise then nor when I press T. But if I try to log in to all my drive or in safe mode I get this noise and none function computer. when I went to disk utility there was message in red to back up my data immediately and take the hard drive to authorized service center.
I checked on internet, you tube and others..and it seems I have faulty hard drive. Since I am here alone and no service center so I think I will replace it myself. But first thing first i need to back up my precious data. I found few ways of doing this and I wonder if you can give me some tips, advise or any other method to do the back up.
1) Transfer data on target mode: I havent done this before but I am thinking to connect my faulty macbook pro to another with firewire, pressing T on the faulty Mac and install Super Duper on the other mac. Then I connect external hard drive to the working mac via USB. And the question is     :      can I transfer the files this way to an external bootable hard drive connected to the working mac     , so the working mac will function as bridge between faulty mac and external hard drive. Also can I do this process through my old none intel based power book(which I am using now) instead of borrowing macbook from friend?
2) Buy new hard drive, open my mac and replace the faulty one. then put the faulty one in external inclosure, connect to refurbished mac and transfer data back. Can I do this? will I need to install the mac os from the CD associated with it before I do transfer?
Is there any other way to do this please?

Jassos wrote:
Hi PlotinusVeritas
where do I download the superdoper please?
http://www.shirt-pocket.com/SuperDuper/superduperdescription.html
its here:
Download the free trial now!
This simple software is free and very easy to use, yes, it makes a 100% clone of ALL on your HD, everything.
(assuming its not so dead it wont copy).
you only need the free trial version to clone your HD.
can I download it on guest account? this one I can login and seems to function fine.
Then install same on your guest account, that wouldnt matter, since Superduper clones everything (except the recovery partition which you dont need in your case right now).
LaCie is Seagate (lacie doesnt make HD) , yes, that would be fine, clone your HD ASAP and hope it works.
there is no software fix for HD hardware failure, ......this is why a backup copy of data is so very important all the time, period.

2007 Macbook pro kernel panic, hard drive problem?

Hello!
I've been trying to sort this for a few weeks now, and I'm hoping someone may be able to shed some light on the situation.
Problem:
I have a 2007 15" MacBook Pro (MacBook Pro 15/2.2/2GB/120GB) which a few weeks ago suddenly died on me. It has what I believe is called a kernel panic. On startup a grey screen falls down with a box saying that I need to restart the computer.
I took it to my local apple store where they booted an OSX (not sure which) from an external drive (I think it was using a firewire cable). The MacBook appeared to work fine from this external hard drive, but when disk utility was run on the internal hard drive, the disk utility eventually froze.
Based on this info, the guy there deduced (fairly reasonably I suppose) that the problem must be my hard drive, and replacing my hard drive should solve this. So bought a
Seagate Momentus 7200.4 500 GB,Internal,7200 RPM,6.35 cm (2.5").
The equipment I now have to try and get my MacBook to work:
- An iMac 2.7 Ghz i5 (8gb Ram) running Mac OSX 10.7.5
- A replacement hard drive for the MacBook (Seagate Momentus)
- A SATA HArd drive USB docking station
- A 500gb iOmega Hard drive with Firewire 800 cables
- The 2 original install disks for Tiger that came with the MacBook Pro
- A working .dmg of retail snow leopard
What I have tried so far:
I have formatted the replacement hard drive correctly (GUID) for Mac OSX. If I turn the macbook pro on with the new hard drive in, a folder icon with a question mark in it flashes in the middle of the screen... If I put in the original install disk, it starts to read it (apple logo and spinning wheel) and then eventually kernel panics. When I hold option on start up, the 'Mac OSX Install Disk 1" is the only option available (the cd/dvd drive must be working if it recognises the disk here i assume?) but when I select it, it spins for a bit, then kernel panics.
My next approach was to try and create an installable and bootable version of an OSX on an external hard drive. (I have tried this with both the original Tiger install disk, and with the leopard.dmg)... I followed the readily available instructions online on how to do this, and was able to restore the first partion on the external hard drive with the OSX install disk image.... The problem I have then face is installing the osx onto the second partition.
This seems to be because my newish iMac/OSX wont let me boot any OSX installer CD/firewire or otherwise, other than the original operating system for the iMac.
I thought this wouldn't matter, as I would be able to run the installer when I plugged the iOmega into my MacBook pro. The problem I now have is that the Macbook wont recogninise the iOmega when it is connected by firewire. It will only recognise it when connected by USB, but when I try and run the installer, it spins for a while then kernel panics. I believe this is because MacBook pros of this age will only run OSX Install/bootable through firewire.
So... hardware wise, could this be anything other than a problem with the hard drive? As we know the MacBook pro will boot from an external drive...
If anyone has actually managed to read this far into this incredibly boring, waffling description of my problem, I am already grateful, and if anyone can give any help or advice at all regarding this, I will be eternally in your debt....
Thank you

I have a 2007 15" MacBook Pro (MacBook Pro 15/2.2/2GB/120GB)
The MacBook Pro 3,1
So I bought a Seagate Momentus 7200.4 500 GB,Internal,7200 RPM,6.35 cm (2.5").
Right the standard hard drive (not the XT which is a hybrid and can be problematic)
a folder icon with a question mark in it flashes in the middle of the screen...
That's the firmware telling you it can't find the/a bootable OS.
The 2 original install disks for Tiger that came with the MacBook Pro
If I put in the original install disk, it starts to read it (apple logo and spinning wheel) and then eventually kernel panics
but when I select it, it spins for a bit, then kernel panics.
Your machines firmware was updated, it will only now boot from 10.6 either on a bootable USB thumb drive or via the white 10.6.3 retail disks you can get by calling Apple by phone.
This seems to be because my newish iMac/OSX wont let me boot any OSX installer CD/firewire or otherwise, other than the original operating system for the iMac.
True. If the iMac could boot from the 10.6.3 disk, then you could install 10.6.3 via Firewire Target Disk Mode onto the other Mac if for instance the Superdrive didn't work.
MacBook pros of this age will only run OSX Install/bootable through firewire.
True.
Just order the 10.6.3 white retail disk from Apple via phone, forget 10.4 and 10.5 as they are not getting updates anyway.
However you can extract iLife from the 10.4/10.5 machine specific disks using Pacifist from CharlesSoft.
Follow these install instructions
How to erase and install Snow Leopard 10.6

MacBook pro 13" 2010 hard drive died in less than 2 months, what to do

Hey apple forums, ran into issues today and I want to know how to handle the situation. I bought a MacBook pro 13" (2010) model on may 1st 2010, it died 9 days latter, best buy replaced it free of charge (even though I had to fight them to do so) this next one ran fine from may 9th 2010 to June 22 2010, just shy of two months. What happened? The **** hard drive died (which by the way is a crappy seagate, I only buy western digital drives as they have NEVER failed me in the 10 years I have used them). The way i know this is because I am a pc repair technician and have run diagnostics and they all say drive is dead. When boot up (or attempt) the apple logo pops up and shows a progress bar (which I have never seen before) it stays on for 10 seconds and then disappears, then the normal circle loading animation begins, then my MacBook pro starts getting ridiculously hot and never loads up Mac os x 10.6.4. I am then forced to hold the power button for 10 seconds to kill the power. I can boot into windows 7 which tells me that it is strongly recommended to perform a disk check which hangs midway, or if I cancel it before it starts I can boot in to a working copy of windows 7. If I access or attach a external hard drive I get a blue screen that says "applehfs.dll" is the cause of the blue screen.
I did force boot the Mac os x install DVD and used the disk utility to first verify permissions and it came up with god knows how many errors, but won't let me repair permissions (it is grey out). So I proceed to do a disk volume check, it stops and says it is strongly recommended to backup as many files as possible and reformat the hard drive. I do have the equipment to recover data, however my concern is getting the hard drive replaced under warranty. Being a it support personnel I need my computer asap, it isn't my problem that the hard drive died so I am not going to just buy a new one, how does apple go about replacing NOT repairing the hard drive.
This is what I want, go to the apple store with my Macbook pro and my craftsman set of #000 screw drivers and take the hard drive out myself, hand the hard drive to the "genius" (which by the way are un qualified in my opinion to service my $1200 Macbook pro, as they scratched my first MacBook pro, and stripped the screws. Sorry Apple but you lost my trust). Have the genius hand me a replacement hard drive, I place that back into my MacBook pro and be on my merry way home to reinstall all of my programs and restore my data.
Is this a reasonable request and do you think apple will give me a hard time?
Thanks to all the help,
Jakthebomb

No, that isn't a reasonable request, and it's not going to happen that way. If you want Apple to warrant your new drive, Apple will insist on installing it. If you want to choose your new hard drive, you'll have to buy and install it at your own expense. Given your impatience, your prejudices, and your low opinion of Apple service, that's certainly what you should do. In addition to getting your preferred drive and installing it on your own schedule, you'll get a much longer warranty than Apple would give you on it, and you'll get to keep the old drive to recover data from it if necessary (Apple would keep it if they replaced it.) Installing a new drive yourself will have no effect on the Apple warranty covering the rest of the machine, and being an IT professional, you can probably buy a new hard drive for even less than we ordinary mortals pay for them nowadays.
So yes, Apple owes you a new drive, but if you can't accept the terms on which Apple will provide it, by all means just buy and install one yourself and get on with your life.

13" MacBook Pro (mid 2009) hard drive and memory upgrade

So I'm looking to upgrade my hard drive and memory for my 13" MacBook Pro. I'm still wondering just how easy it will be to recover my data, and put it back onto my new drive. I currently have everything backed up to an External drive using Time Machine. If I back it up, and then do the replacement, is it really as simple as it sounds to start it up, put in the Mac OS disk and then restore from a Time Machine backup? I have 150 Gb worth of data and would be ticked off if I can't get it back to my MacBook Pro. Any expertise out there? The actual installation looks easy, but it's the loading the new drive that has me concerned. When I install the new drive, is there anything else I need to do to prep it? And how do I do it if there is? Looking at a 500 gb or even 1 Tb Western Digital drive.

I would say get yourself an external enclosure. Put the hard drive that comes out of your MacBook pro into the enclosure. Put in the new hard drive. Boot up from the external hard drive, use disk utility to format the new drive. Use Carbon Copy Cloner to move everything as it is from old hard drive to new internal one. Re-boot to internal drive, you are done.
Carbon Copy Cloner is a freeware get it from download.com

File transfer from MacBook Pro into external hard drive

I can't copy files from the MacBook into an external hard drive.
In the 'Get Info' section, it says read-only. However, the hard drive have just been recently bought.
I had the same problem with our previous hard drive. Although the previous hard drive was 'read-only' I was able to copy and paste files in our old HP laptop.
What can I do in order to copy and paste files from the MacBook into the hard drive?
Hard drive = Toshiba
Capacity = 1TB

In my last paragraph, I said
"Note that Windows PCs cannot write natively to an HFS drive, so if you need to exchange files between Mac and PC, we need to talk about different options."
Windows cannot read Mac Extended (HFS) formatted drives; the Mac cannot write to Windows (NTFS) formatted drives.
The only formats fully compatible between Mac and PC are FAT32 (largely deprecated) and exFAT. If you need full read-write compatibility between Windows and Mac, and you can erase the drive (ie, it's a new drive or you have confirmed backups), reformat to exFAT using Disk Utility.
If you have a drive with files on it and you cannot erase them at the moment:
- if the drive is formatted for the Mac, you can purchase MacDrive for the PC
- if the drive is formatted for Windows (NTFS), you can purchase Paragon NTFS for the Mac.
Matt

Moving iTunes library from macbook pro to external hard drive

I need to move my iTunes library to my external hard drive.

Drag it there, launch iTunes with the Option key held down, and choose it.
(121239)

Macbook pro mid 2009 Hard Drive Replacing

Hello my name is Javier, I amcontacting you for a problem I have on a mid 2009 Macbook Pro 2.8GHz (MB986LL /A), This is a computer, which I paid more than 2200€ less than 2 years, the date of purchase was July 17, 2009.
Serial number: W8925AZT644
Registered to Maria del Carmen
I have problems and Apple does not want help ☹
You will see the problem withthe computer for which you are annoyed by the hard drive where smart verification failsand tells me I have to changethe hard disk.
I tried not to disturb and replace the hard drive myself, but this team and its driver gives problems with SATAdrives that do not bear the Apple firmware, which are described in your techsupport forums
https://discussions.apple.com/thread/2054387?start=0&tstart=0
https://discussions.apple.com/thread/2267098?start=75&tstart=0
As you can see there two threads with literally hundreds of pages on the incident.
The problem is that the same hard disk carrying thenotebook without the Apple firmware is worth € 52 but if Apple bought the costis 300 €, the same drive just with different firmware but it makes that thehard drive "NO APPLE "problem which is an abuse by Apple against itscustomers and a clear assault on the consumer.
What hard drive could buy?, do not want problems, Can anyone give their experience?
I've been watching this that is very similar to what has by default
HTS545050B9A300 500 GB (500,0 GB, Travelstar 5K500.B, MAESTRO) AABIJ5
Help me Please!!!!!!!!!!!!!!!!!!!!

Seagate is the must compatible hard drives with Macs
And you can see how to replace it in the link below
http://www.ifixit.com/Device/MacBook_Pro_17%22_Unibody
But keep in mind that you will void apple's warranty any you may damage your computer.

MacBook Pro late 2008 hard drive problems

I've got a 2.4Ghz 15" MacBook Pro (model MB470LL/A). I've been having so many problems with upgrading the hard drive that I'm at my wits end. First, I swapped out the stock 250gb hd for a Western Digital Scorpio Blue 500gb. Only later did I find out a lot of people are having problems with it. My problem was slightly different...it would work fine for random periods of time, sometimes hours. Then the system would seemingly freeze (even iTunes stopped playing and the menu bar clock stopped running), then after maybe 15 seconds or so, it'd start up again. This started driving me nuts when it became more frequent. I tried all the different fixes from various message boards, to no avail. I even tried reinstalling OS X. No change.
So I threw that in an external enclosure (where it's been working fine since) and bought a Samsung Spinpoint M7E HM501II instead. The system seemed to crash more often, so I ran a disk scan (Drive Genius 3) on it. The scan kept either choking at a certain point and/or kicked up bad block errors like crazy. HOWEVER, when I put the Samsung in an external enclosure and ran the disk scan again, it finished without an error. I can replicate this at will.
I took it in to the local Genius Bar, where they ran more tests and determined it was a bad drive. I RMA'd it and got a new one. Same problem with the scans. And again, it runs and scans perfectly fine in the external enclosure.
So now I'm at a loss. I don't want to keep wasting money buying different branded hard drives. Is there some strange problem with my MacBook Pro? I'm thinking there some sort of weird problem with the drive controller or something, and I tried to get the Genius Bar to test that. They claimed they did and found no problem. Do I live with my 250gb drive (I'm only looking to get a bigger drive, not something faster. I need the battery life) or is there anything else I can do?

Lately there have been quite a few debates on the hard replacement issues with MBP's and from what I have seen they mostly are around the power consumption of the drives being not compatible..
So it's been many days now I'm recommending people this drive :
http://www.amazon.com/Western-Digital-2-5-Inch-Internal-WD5000BEKT/dp/B003TOE4PQ
It's one of the least power hungry drives on the market and is one of the highest performers as well.
It's 7200 rpm and a whopping 500GB for 70-80 dollars is quite interesting .
if you buy the drive and hesitate to replace don't worry it's a 5 minute super easy task and you will find plenty of help if you report back here
I hope I could be of help

MacBook Pro 2012. Replaced hard drive yesterday by apple. Went home working and now it turns off and won't come back on till I plug it in... Help!

Similar Messages

Maybe you are looking for