MacBook Pro 2013 (new one) making a bootable USB..

ok
i just replaced my old 2008 MacBook Pro with this brand spanking new. Im new to these flash drives (used to the old school hard drives, when you had a bootable physical disc to troubleshoot). Well i thought i found online how to do it (make a bootable drive on a USB flash drive) but that seems not to be working. I following the instructions to use Terminal (which ive used before on the old machine) but it seems not to be working right.
Some how im thinking that since it came pre-installed, this method isnt working...since i cant download the installer from the APP Store.
please help, thanks

Did you do something with your Applications folder, like rename it, or move it?
Look in the Applications folder, and if you see the Mavericks installer (it's named Install OS X Mavericks), delete it.
Go to the link in my post above. If you click on "Upgrade now", it should take you to the App Store.
Do you have something like Little Snitch installed, that is blocking outgoing network traffic?
When I click on that link, the App store looks like this:
Click on the Download button (See the red arrow)
Then you would wait for the download to complete, put in your 8 GB flash drive, and run DiskMaker X.
Message was edited by: arthur

Similar Messages

Best way to transfer files from old Macbook Pro to new one?

I just got a new Macbook Pro from Apple...YEEEEAAAHHHH!
So....
What's the best way to transfer files from old Macbook Pro to new one? I know Migration assistant, but is there a recommended way? I don't want to put do a system restore or transfer everything from the old laptop, but I do want to move important things like photos, music, documents and such over. Any suggestions on best way to do this?
Another question, perhaps subquestion. If I have, say, an older version of iPhoto but a newer version of one on my new Macbook Pro, will it still transfer photos no problem?
Just looking for hints from the experts so this puppy is set up in the best way possible.

Just one comment on this:
‘If I have, say, an older version of iPhoto but a newer version of one on my new Macbook Pro, will it still transfer photos no problem?’
the problems are ALWAYS in the reverse way, when you have the newest (or a newer) version of a given app, and wish to transfer its library to an older version.
Otherwise, see the link to Pondini.
I have been using Martin Jahn’s iBackup, with which I have become accustomed and works fine. It also makes daily backups. Its advantage over other apps is that you may add whatever you wish to save, beside its default settings (which you may delete or cancel, of course, even if not recommended); it also has a friendly interface and easily customizable. Of course, this is a personal view, you may try other methods as well, or other backup apps. All are good if you are satisfied and correspond to your needs.

How to transfer CS6 from old macbook pro to new one?

how to transfer CS6 from old macbook pro to new one?
many thanks - is it something to do with deactivation?
How long does it take for the whole process?

do not transfer. install all adobe products (including cs6) using their installer.
the whole process depends on a number of factors, but generally takes more than 10 minutes and less than 2 hours. the biggest factor is your download speed if you need to download the installation file(s).
Downloads available:
Suite: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
https://helpx.adobe.com/download-install.html
Download and installation help for Adobe links
https://helpx.adobe.com/download-install.htmlDownload and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Need to move Acrobat X Pro from old MacBook Pro to new one. Move requires entry of serial number, which I can't find. What next?

Moving Acrobat X Pro from old MacBook Pro to new one, entry of serial number required, can't find it. What to do?

Hi,
You might need to deactivate Acrobat on your old MAC, then install it on your new system and then activate it with your serial number:
Please refer this link and get your serial number:
Download Acrobat products | Standard, Pro | XI, X
Regards,
Anubha

Are you trade in old macbook pro for new one

hello ! i have mid 2010 macbook pro 13.3 . and i willd like to trade it for a new one
are you trade old for new ??? if my friand take my macbookpro and go to app store in NYC
the same one i buy my macbook will you trade it and give me new one and i will pay the reast
sory for my english im not from the US and im not using google translate
thanks and have a Gr8 Week :-)

no trade ins, no
however you can sell same on Ebay, etc.

MacBook Pro 2013 windows 7 can't find USB

Hi, i have a problem installing Windows 7 on my new MacBook Pro 13" 2013.
Here's what i did before it goes wrong.
I made an .iso file from original Windows 7 DVD, ran BootCamp and chose the option to install the .iso file on a USB stick (8GB 3.0), installed Windows drivers on the same stick, partioned my drive (40 some gigs). Then the computer reboots and Windows installation progresses until it want to use the drivers installed on the USB stick. It seems it can't find the USB stick? I've tried to use another USB stick, and changing USB ports, but nothing.
Does anybody have a take on what could be wrong?

You won't be able to connect your iPhone to your computer via Bluetooth. It's not supported.

I erased my new macbook pro 2013 retina. now to reinstall os I have problem

3 weeks ago I bought a new brand macbook pro 2013 retina; but I erased the whole hard with the intention of making my mac look just like the 1st day. I thought starting it up again is as easy an iPhone. ( you know, when you erase an iPhone you don't have to download ios again). but then I found out it's not that easy. I tried every possible way to reinstall mavericks like building a bootable flash drive using terminal, diskmakerX, etc. but no luck; I was desperate so talked to developer od the diskmakerX app and he told me the only way for me is to redownload mavericks directly form my new macbook pro; I tried it too, but since here in my country, Iran, internet speed is really slow besides that the country IP is in usa sanctions, downloading a huge file like mavericks which is about 5.3 GB was not an easy task; anyway, everytime I started the downloading it disconnected after a while and I had to click to download again after a few times doing so now when I try to start downloading get this error :"a server with the specified hostnamecould not be found" or "could not find installation information for this machine"
now my newly bought macbook pro is completely useless
I would really really appreciate it if anyone could help me with this friggin' issue; it is driving me crazy
Thank you in advance for your time and energy and GOD bless you

nourmorad wrote:
well I have a mb Air, is it ok?
No. It has to be the same MBP model as yours.
To clone, you attach an external HDD to a MBP and open DISK UTILITY>RESTORE and fill the appropriate fields with the host MBP and the external HDD. Click on Restore and then the data with the OSX will be copied to the external HDD.
Then attach the HDD to the recipient MBP (yours) and boot the MBP with the OPTION key held down. The external HDD will appear, select it and boot the MBP. Again select DISK UTILITY>RESTORE. Select the external HDD as the Source and the MBP as the Destination and click on Restore. The data with the OSX will be copied on to your MBP from the external HDD. It then should be functional.
Ciao.

How can I move Acrobat 9 Pro from my old MacBook to a new one?

Hi there,
How can I move Acrobat 9 Pro from my old MacBook to a new one?
Thanks!

Hi cialbert,
Do you have the install media? If not, you can download Acrobat from here: Download Acrobat products | 9, 8 - Adobe. You'll need your Acrobat serial number (see Find your serial number quickly - Adobe).
Note, as well, that the licensing agreement allows you to activate the software on up to two computers. If you've already activated it on two computers, deactivate on one before installing on the new computer (see Activation & Deactivation Help).
I think that should take care of it! Please let us know if you need additional help.
Best,
Sara

I just got a new macbook pro (my other one stopped working). I am trying to sync the music on my iphone to my new mac's itunes library. I've clicked sync in iTunes but it doesnt work. how can i do this?

I just got a new macbook pro (my other one stopped working). I am trying to sync the music on my iphone to my new mac's itunes library. I've clicked sync in iTunes but it doesnt work. how can i do this? I don't want it to delete everything from my phone or old computer.

hstarkeyy wrote:
I don't want it to delete everything from my phone or old computer.
You don't need to delete anything from your phone or you old computer.
Copy the entire /Music/iTunes/ folder from old computer or backup to /Music/ on new computer.
If you cannot use the old computer or don't have a backup...
-> Recovering your iTunes library from your iPod or iOS device
Then immediately make a backup of your new computer.
Get an external drive and plug it in and use -> Time Machine

Why is it that the new macbook pro processor upgrade option only offers up to 2.8 Ghz with Intel Dual Core i7, when back in Sep 12 I bought a 2.9 Ghz Intel Dual Core i7 Macbook, is the new one tuned to go much faster anyway?

Why is it that the new Macbook Pro processor upgrade option only offers up to 2.8 Ghz boosting to 3.3 Ghz with Intel Dual Core i7, when back in Sep 12 I bought a 2.9 Ghz boosting to 3.6 Ghz Intel Dual Core i7 Macbook, is the new one tuned somehow to go much faster anyway, or will the new one be slower in fact? Or does the solid state drive compensate for the lack of increased processor capacity?

The CPU's come from different Intel 'families'. The older ones are 'Ivy Bridge' and the newer ones are 'Haswell'. Numbers alone will not determine the efficiency of CPU.
Ciao.

HT201364 BRAND NEW MACBOOK PRO 2013 - WON'T DOWNLOAD MAVERICK'S FROM STORE

I have just Purchased a brand new Macbook Pro 2013 from Apple store and it won't let you download Maverick's even thought it's already installed. Does anybody know why? I originally purchased a Macbook Air 2013, which I returned for the pro model. This came with Mountain Lion, which the app store let me download Maverick's from the app store. I could also download as a backup in case something went wrong.

Welcome to Apple Support Communities
You have got a Late 2013 MacBook Pro.
That MacBook Pro needs a special OS X Mavericks version that is newer than the Mavericks version available in the Mac App Store. This is the reason why the Mac App Store does not let you download Mavericks even if you are using OS X Mavericks.
To reinstall OS X Mavericks, use OS X Recovery > http://support.apple.com/kb/HT4718 You will not be able to download OS X Mavericks from the Mac App Store until Apple launches OS X 10.9.1

Can I install Snow Leopard on MacBook Pro 2013

Can I install Snow Leopard on my new MacBook Pro 2013. I'm so tired of the UGLY grey icons. I keep thinking that the mail or iPhoto window is not the active one because everything is grey. I use Snow Leopard on my 27inch iMac and love it. Nice RED delete button for mail, etc. Thanks

Firmware restrictions prevent directly loading any OSX earlier than what came with the system.
The *only* way around is to load SnowLeopard *Server* (not Client) into a virtual machine (Parallels, VMWare Fusion, VirtualBox). But that costs $20+shipping/tax for the disk and is a learning curve into SL Server. And you *still* need your host OSX to run it, and the VM will not most efficiently use the hardware resources.

External disks (Firewire/USB) won't boot in late Macbook Pro 2013, but do work in earlier Mac's. How to fix it?

Hi
It always worked, till now. If I sell a Apple notebook because I bought a new one, I make a clone with CCC and with Command-R or Choose Startup disk I say to the new machine: now eat this, here's my old stuff.
It's a great way of upgrading to a new machine. But.. my late Macbook Pro 2013 (Retina, 16 Gb) doesn't allow me to boot from any of my disks: not Firewire, not USB 2.0 and not USB 3.0 (Imagine how many hours I lost to find this out). Btw, the disk image did boot on ANY OTHER Mac, besides the late Macbook Pro 2013.
In some threads, https://discussions.apple.com/thread/5499231?tstart=0, it's suggested that it has to do with a special Maverick that doesn't allow older "machines" to be booted from USB.
Anyway, here I am with a tremendous problem. Got my files safe in a clone, but my machine doesn't allow me to boot from it. Btw, out of desperation I tried to use the Migration Assistant, but that made a mess of Adobe versions.
Is there any workaround? How do I get the files + system files from my USB / Firewire disk to my Macbook Pro?

I took the precaution to update my old Macbook Pro to the same Maverick version and EFF as my new one. The problem is rooted somewhere in the special version (and not the Combo) of Maverick.
Now I need something to outwit this. Gonna try to make an image of the clone, deleting a version file and than feed it once more. Will post the results here.

HT1379 My macbook pro 2013 is running to slow even when I am using the keyboard, it running with a delay. I upgraded the memories to 8gb but still slow what can i do to fix it.

Good morning I am confronting serious problems with my Macbook pro 2013, that is runing to slow, even when I am writing this email is running with some kind of delay. I upgraded the memories to 8gb but still running slow . Please let me know what I can do to solve the problem. Thanks in advance. Fernando

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed '/^ *$/d; s/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d; /[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d; /:$/{s/ *:$//;x;s/\n//p;}; /^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/$.*: $$.*$/ $\2$/;H;}; /Apple|SCSM/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); E=; for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* || continue; ls | while read f; do [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=" *" || e=; awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print $0 "'"$e"'"}' <<< "$f"; done | tail`; Pm "${D[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/B,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in DYLD_INSERT_LIBRARIES DYLD_LIBRARY_PATH; do launchctl getenv $e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter
exec bash
in the window and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If it happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

IPhoto in MacBook Pro 2013 only shows "place holders," but no photos, after data transfer from Macbook Air 32011

I am trying to transfer data from my MacBook Air 2011 to a "new" MacBook Pro 2013. Both are running Yosemite 10.10.2. Since Migration Assistant WOULD NOT WORK (the MacBook Air couldn't "see" the MacBook Pro), using my WiFi network, I transferred the necessary data to a 500GB drive and THEN to the MacBook Pro. However, two programs didn't transfer well - or at all! iTunes only transferred the Music (Media?) files, but not iTunes U, Podcasts, Audiobooks, etc. I have had to drill down into the storage files, retrieve the non-transferred files and add them, one by one - a most laborious task. But, this is nothing compared to the problem with iPhoto (9.6), which shows only 6 events and 4 Faces transferred, with the rest only place holders (black boxes and grey dotted squares) in all the folders in my iPhoto.
I "Showed Package Contents," and found the missing files - of which there are many! - and started adding them, again, one by one.
Can anyone tell me what happened to my iPhoto (Yosemite 10.10.2)? It's fine on my MacBook Air, but simply WON'T TRANSFER to my MacBook Pro?
PLEASE - someone tell me how to CORRECTLY transfer my iPhoto files and/or HOW TO MAKE THE MACBOOK AIR "SEE" THE MACBOOK PRO in Migration Assistant?

Hello Mary,
Sorry to hear that you are having issues with moving your data over to your new Mac. There are a few alternatives that you can do to migrate that data if you are not seeing it in Migration Assistant. The first is make a Time Machine back up to that 500 Gb external hard drive and then use that in Migration Assistant to copy the entire data over. If you do that you will want to remove any data that you have on your MacBook Pro after the transfer completes as it will create another user with the data from the MacBook Air. Another option is to use a Thunderbolt Cable that you can purchase online if you want and use the option from another disk to copy that over. Take a look at the articles below for more details.
Mac Basics: Time Machine backs up your Mac
https://support.apple.com/en-us/HT201250
Move your data to a new Mac
https://support.apple.com/en-us/HT204350
Apple Thunderbolt Cable (2.0 m) - White
http://store.apple.com/us/product/MD861ZM/A/apple-thunderbolt-cable-20-m
Regards,
-Norm G.

MacBook Pro 2013 (new one) making a bootable USB..

Similar Messages

Maybe you are looking for