MacBook Pro 7,1 frequently freezes, force reboot needed.

Hi all,
since a while, I get frequent system crashes while doing what I assume is quite light work, since HDD is not very sollicited, CPU temperature is below 75°C, and RAM has around 3GB free. I can't find any culprit, but to notice frequency is high enough that I'm starting to worry.
Technically, this computer only had a RAM upgrade, getting 8GB from OtherWorld Computing (I didn't want to skimp on quality to save a few bucks) and installed uneventfully.
Typically, when the computer crashes, there's no warning, no kernel panic greyed out curtain. The trackpad responds normally, fan is often running at high speed (not always maximum speed), and when I hover the cursor above GUI elements, it doesn't react: the Dock icons don't grow, no info-bubble appears, and clicks aren't registered. When I try to put the computer to sleep by closing its lid (sometimes a solution for "soft" bugs), for minutes on, the fan still runs, screen doesn't turn off, and the computer doesn't go to sleep.
Typically, I have to force restart by holding the Power button, and the Console content is unhelpful: there's the few operations logged before the freeze, then the restart process, nothing in between. This time, there was a few piece of info written in the Console before restart:
24/01/12 22:29:01
SpiderOak FSEvents[430]
/Volumes/Utilisateurs/Cubytus/Library/Application Support/SpiderOak/fs_notify__dir_watcher_ignore/ excluded by /Volumes/Utilisateurs/Cubytus/Library/Application Support/SpiderOak
24/01/12 22:29:04
SpiderOak FSEvents[430]
Notification change 7162257514882408282 in /Volumes/Utilisateurs/Cubytus/Library/Application Support/Adium 2.0/Users/Default/, flags 0
24/01/12 22:29:07
SpiderOak FSEvents[430]
Notification change 7162257514882408292 in /Volumes/Utilisateurs/Cubytus/Library/Application Support/SpiderOak/fs_notify__dir_watcher_ignore/, flags 0
24/01/12 22:29:07
SpiderOak FSEvents[430]
/Volumes/Utilisateurs/Cubytus/Library/Application Support/SpiderOak/fs_notify__dir_watcher_ignore/ excluded by /Volumes/Utilisateurs/Cubytus/Library/Application Support/SpiderOak
24/01/12 22:29:28
SpiderOak FSEvents[430]
Notification change 7162257514882408313 in /Volumes/Utilisateurs/Cubytus/Library/Application Support/SpiderOak/fs_notify__dir_watcher_ignore/, flags 0
24/01/12 22:29:28
SpiderOak FSEvents[430]
/Volumes/Utilisateurs/Cubytus/Library/Application Support/SpiderOak/fs_notify__dir_watcher_ignore/ excluded by /Volumes/Utilisateurs/Cubytus/Library/Application Support/SpiderOak
24/01/12 22:29:38
SpiderOak FSEvents[430]
Notification change 7162257514882408327 in /Volumes/Utilisateurs/Cubytus/Library/Cookies/, flags 0
24/01/12 22:29:41
SpiderOak FSEvents[430]
Notification change 7162257514882408337 in /Volumes/Utilisateurs/Cubytus/Library/Application Support/SpiderOak/fs_notify__dir_watcher_ignore/, flags 0
24/01/12 22:29:41
SpiderOak FSEvents[430]
/Volumes/Utilisateurs/Cubytus/Library/Application Support/SpiderOak/fs_notify__dir_watcher_ignore/ excluded by /Volumes/Utilisateurs/Cubytus/Library/Application Support/SpiderOak
24/01/12 22:30:12
kernel
PM notification timeout (pid 18, configd)     //HERE THE MOUSE CURSOR IS RESPONDING, COMPUTER IS FROZEN OTHERWISE.
24/01/12 22:30:12
kernel
PM notification timeout (pid 70, efax)
24/01/12 22:30:12
kernel
PM notification timeout (pid 51, cupsd)
24/01/12 22:30:12
kernel
PM notification timeout (pid 64, loginwindow)
24/01/12 22:30:12
kernel
PM notification timeout (pid 64, loginwindow)
24/01/12 22:30:12
kernel
PM notification timeout (pid 64, loginwindow)
24/01/12 22:30:12
kernel
PM notification timeout (pid 320, Finder)
24/01/12 22:30:12
kernel
PM notification timeout (pid 1873, QTKitServer)
24/01/12 22:30:12
kernel
PM notification timeout (pid 2617, Adium)
24/01/12 22:30:12
kernel
PM notification timeout (pid 2617, Adium)
24/01/12 22:30:12
kernel
PM notification timeout (pid 2669, plugin-container)
24/01/12 22:30:12
kernel
PM notification timeout (pid 2671, VDCAssistant)
24/01/12 22:30:12
kernel
PM notification timeout (pid 320, Finder)
24/01/12 22:30:12
kernel
PM notification timeout (pid 3702, backupd-helper)
24/01/12 22:30:12
kernel
hibernate image path: /var/vm/sleepimage
24/01/12 22:30:12
kernel
sizeof(IOHibernateImageHeader) == 512
24/01/12 22:30:12
kernel
Opened file /var/vm/sleepimage, size 8589934592, partition base 0xc805000, maxio 400000 ssd 0
24/01/12 22:30:12
kernel
hibernate image major 14, minor 3, blocksize 512, pollers 5
24/01/12 22:30:12
kernel
hibernate_alloc_pages flags 00000000, gobbling 0 pages
24/01/12 22:30:12
kernel
hibernate_setup(0) took 0 ms
24/01/12 22:30:14
kernel
Auth result for: 00:27:0d:0b:40:c1 MAC AUTH succeeded
24/01/12 22:30:14
kernel
AirPort: RSN handshake complete on en1
24/01/12 22:32:15
kernel
npvhash=4095            //RESTARTED
24/01/12 22:32:15
kernel
PAE enabled
24/01/12 22:32:15
kernel
64 bit mode enabled
24/01/12 22:32:15
kernel
Darwin Kernel Version 10.8.0: Tue Jun  7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
24/01/12 22:32:15
kernel
vm_page_bootstrap: 1975728 free pages and 39504 wired pages
24/01/12 22:32:15
kernel
standard timeslicing quantum is 10000 us
24/01/12 22:32:15
kernel
mig_table_max_displ = 73
24/01/12 22:32:15
kernel
AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
24/01/12 22:32:15
kernel
AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
24/01/12 22:32:15
kernel
calling mpo_policy_init for TMSafetyNet
24/01/12 22:32:15
kernel
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
24/01/12 22:32:15
kernel
calling mpo_policy_init for Quarantine
24/01/12 22:32:15
kernel
Security policy loaded: Quarantine policy (Quarantine)
The last time it crashed that way, I used AppleJack (latest version at the time of this writing) to make a thorough cleansing of caches, permissions repairs, etc, using the "AUTO" flag instead of "auto".
For now, I would like to know what my solutions are, and why it keeps on crashing. How can I tell appart a hardware or software problem? Considering I'm in the middle of a very important project, I'm very concerned about data loss and lost time, even more than usual; is a full TM restore still advisable, or should I assume there's something wrong, somewhere, in the computer files and settings, and thus, that I should restore only documents and known good software settings?
What other solutions may be advisable?

darkrider92,
I have the same model MacBook Pro as the one that you got from your mom. Were you able to install the 10.6.8 update successfully onto the factory drive? Were you using the factory RAM when you tried to install the 10.6.8 update on the SSD?
Have you checked  the Web site of the SSD’s manufacturer, to see if there’s a firmware update available for the SSD?
You can download the 10.6.8 update outside of Software Update from Apple here; in case you need to try to install this update several times, running it from your local disk would be more convenient than waiting for it to download again.

Similar Messages

  • MS Office on my MacBook Pro causing it to freeze.  I need to uninstall and reinstall office. Anyone else had this problem?

    I have a problem with MS Office on my MacBook Pro causing it to freeze. Apple have said I need to uninstall and reinstall office. Anyone else had this problem? How do you uninstall Office as I believe there is a remove software file but can't find it.
    MS Office 2011, Macbook Pro Oct 2102

    You might want to ask in the Office for Mac forums located here: http://answers.microsoft.com/en-us/mac?auth=1

  • Macbook Pro 4,1 frequent freezes

    here's an excerpt log from console...which is repeated throughout the log. the last line of the log here is the last entry prior to the freeze. Any ideas, Macophiles?
    humbly yours,
    Patrick in Dallas
    Feb 23 21:17:36 localhost com.apple.launchd[1] (org.samba.winbindd): Throttling respawn: Will start in 10 seconds
    Feb 23 21:17:38 localhost xgridagentd[31]: Warning: agent could not determine computer name, next attempt in 10 seconds
    Feb 23 21:17:46 localhost com.apple.launchd[1] (org.samba.winbindd[1978]): Exited with exit code: 1
    Feb 23 21:17:46 localhost com.apple.launchd[1] (org.samba.winbindd): Throttling respawn: Will start in 10 seconds
    Feb 23 21:17:48 localhost xgridagentd[31]: Warning: agent could not determine computer name, next attempt in 10 seconds

    thanks for the deciphering!
    i reset my router, and that seemed to help some: console log said "able to get client identity"
    but now I'm getting this console entry repeatedly:
    2/25/11 12:23:55 PM com.apple.launchd[1] (org.samba.winbindd) Throttling respawn: Will start in 10 seconds
    2/25/11 12:24:05 PM com.apple.launchd[1] (org.samba.winbindd[1193]) Exited with exit code: 1
    i only mention this, because airport suddenly turned off...which has happened before. Only a restart will enable me to turn it on again.

  • My macbook pro (August 2010) keeps freezing when apple mail starts up. This happens every 2nd time I turn on my Macbook Pro. This forces me to hold down the power button to restart my Macbook Pro. Does anyone else experience this, and is there a fix? Thx

    My macbook pro (August 2010) keeps freezing when apple mail starts up. This happens every 2nd time I turn on my Macbook Pro. This forces me to hold down the power button to restart my Macbook Pro. Does anyone else experience this, and is there a fix? Thx.
    since upgrading to OS lion, my mac book pro (2010 August) keeps freezing (non responsive, requires restart) when i turn on my mac and the system is trying to open apple mail. while apple mail is attempting to collect new mail, the macbook pro freezes. this happens every 2nd time i try to start up my computer. this only started happening after i upgraded to OS lion. please let me know what I need to do to fix this. being forced to restart every 2nd time i turn on my macbook pro has been very frustrating. not sure if apple mail is also the cause of my macbook pro for being very slow during start-up (on the occasion the computer doesn't freeze).

    I am having similar 'freezing' problems with many programs (Mail, Safari, iTunes, etc.). I have done a clean install of Lion instead of an upgrade when it came out. Perhaps something went wrong with my install? I'm thinking about wiping and reinstalling.

  • MacBook Pro was having Finder/Freezing issues, Tried restarting and now it wont reboot. Been stuck at the apple logo/loading screen for over an hour.

    MacBook Pro was having Finder/Freezing issues, Tried restarting and now it wont reboot. Been stuck at the apple logo/loading screen for over an hour.

    Step by Step to fix your Mac
    Create a data recovery, undelete boot drive

  • I own a late 2009 Macbook Pro, and it keeps freezing after OSX Lion installation.

    I own a late 2009 Macbook Pro, and it keeps freezing after OSX Lion installation.  I will post my computer's 'specs' below.  I installed Lion, from Snow Leopard, through the App store.  The first week, it worked like a dream, and was loving my brand new computer, or so it seemed.  I then began to run into problems, and I can't confirm this 100%, but I believe it was after I updated from 10.7.1, to 10.7.2. 
    The freezes are sporatic at best, and cannot be narrowed down to one app.  I googled the issue about two weeks ago, and found a fix involving a temporary log-in, verifying the disk, restarting the computer holding CMD+R, and repairing the disk from there.  That fixed the problem.  For about three or four days.  From there I brought my laptop to Best Buy, where I purchased the computer (start the groans, my dad wanted the accidental damage, and he was paying, there was no argument).  My warranty there was still good, but all they were offering was to check my hard-drive, and possibly ship it out.  That would not be good for me, as I am a High School student, who works online. 
    So I then decided to go to the Apple store, see what they said.  They said a bunch of people had this problem, it would cost a lot to fix, as I would need a new Logic Board.  This did not make any sense to me, as I knew it was Lion's fault, so why would they not make the L-2009MBP Logic Board compatible, and why are only a few people having this problem, well a lot more than a few, but I mean not everyone. 
    So I asked a friend about it, and we decided to run a back up, and erase the computer, and re-install Lion.  Figuring maybe my data was corrupted during install.  This helped for a day or two, and happened again.  So this time, we backed up only files (music, pics, documents, etc.,) and did a fresh install.  I got my computer back last night.  Now, I am not saying that didn't help.  Previously I would have frozen about 18 times well writing this, but I have not frozen once (hopefully I didn't just jinx myself).  I have gone from about one freeze every 10-15 minutes (sometimes worse), to about one every 1-3 hours.  Which, let's be honest is still a lot. 
    So, before I just decide to go and revert to Snow Leopard on my merry way, I ask, do any of you have any other ideas?  Or guarenteed fixes?  I know a guarentee is a hard thing to ask for, but I am desperate, my teachers are getting angry with me for not sending work, and I know this would help a lot of people.  Thank you to those who read through my whole spiel, and thank you to those who will help me!
    [Ps, while I am somewhat of a noob, I know my way around a computer, so any help, or knowledge you could bestow upon me is awesome.  Especially DIY fixes.  (if your only advice is, don't buy a mac at Best Buy, don't bother commenting)]
    Macbook Pro
    15-inch, 2.53GHz, Mid 2009
    Processor:  2.53 GHz Intel Core 2 Duo
    Memory:  4 GB 1067 MHz DDR3
    Graphics:  NVIDIA GeForce 9400M 256 MB
    Software:  Mac OS X Lion 10.7.2 (11C74)

    Once it is downloaded you need to restart the computer if it does not restart automatically. When it next starts up you should note a progress bar appearing below the Apple logo. When done the computer will restart once more. The new firmware should now be installed.

  • Tingling Sensation when charging Macbook Pro 13 inch 2015 with Force Touch

    Today, I just got my Macbook Pro 13 inch 2015 with Force Touch.
    When I charge it, there is a VERY STRONG tingling sensation. Almost feel like a strong vibration. I believe this is what they call a "mild electric shock". After testing the new machine with different power outlets (both at my house and other people houses), with same result .... my fingers feel all numb.
    I am going to Apple service next week with this.
    Anyone experiencing the same thing?

    Usually that indicates a bad ground in the source system.  Perhaps a licensed electrician should be employed to check out the wiring.
    Ciao.

  • My macbook pro turns blue and freezes

    my macbook pro turns blue and freezes, especially when using hotmail. It blinks blue when switching in hotmail pages. Once fully blue I have to restart it as it crashes

    Step by Step to fix your Mac

  • Trying to view an SD version of an iTunes movie on my MacBook Pro and it keeps freezing at 9 minutes into movie. Using iTunes 10. Any suggestions to correct this problem?

    Trying to view an SD version of an iTunes movie on my MacBook Pro and it repeatedly freezes 9 minutes into movie.  Using iTunes 10.  Any suggestions to correct this problem?

    I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2.  My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone).  I  was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did. 

  • Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?

    Macbook Pro (2011) froze while working, forced shut down, now won't turn on. Grey screen with apple logo and spinning wheel for hours. Help?
    Unfortunately do not know the operating system since I never updated anything and I can't get in to it.
    Thanks for your assistance.

    If you want to preserve the data on the boot drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
    There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
    1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

  • My MacBook Pro 15" i7 2011 freezes suddenly minutes after starting up.

    My MacBook Pro 15" i7 2011 freezes suddenly minutes after starting up the computer.
    Sometimes it beeps after freezing, and keeps beeping forever until I shut down the computer by pressing the power button.
    Other times the screen gets a little darker and a text appears saying I need to turn off the computer by pressing the power button and restart, but after restarting the computer freezes again. Each time I turn it on it takes only a few minutes to freeze it seams, about 2-3 minutes or less, and occasionaly it doesn´t even start up.
    I don´t recall the exact version of the operating system, its MacOSX (10.6 or something)
    Any sollutions?

    Three beeps is usually indicative of a RAM problem.  Take out one RAM chip and see what happens and then swap with the other one.  See if there is a difference.  Also engage the Apple hardware test and see if that offers any useful information.
    Ciao.

  • MacBook Pro Retina late 2013 freezes on Youtube page

    Hello!
    So, my MacBook Pro Retina (late-2013) freezes when i open youtube home page using Safari. The cursor gets slower until everything absolutely freezes so i have to restart computer using "power" button. Yes, this problem only occurs when i use Safari, other browsers i checked are ok.
    What can i do to stop it?

    Hello bloomaround,
    Welcome to Apple Support Communities.
    From what I gather, Safari stops responding when viewing a specific webpage on your MacBook Pro. Take a look at the article linked below which provides troubleshooting suggestions that’ll resolve most issues with Safari on a Mac.
    Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues - Apple Support
    Take care,
    -Jason

  • Hi,  I was wondering if someone can help me. I have a MacBook Pro, it has came up saying I need to free up space on the disk as it full every time it starts up, so I log in and no icons or applications show up on the screen just my background wallpaper, t

    Hi,
    I was wondering if someone can help me. I have a MacBook Pro, it has came up saying I need to free up space on the disk as it full every time it starts up, so I log in and no icons or applications show up on the screen just my background wallpaper, the only thing I can do is the force quit keyboard shortcut but there is nothing to quit, I have tried to start up in safe mode but again there is no icons in the desktop,
    I have my disks that came with my laptop I have went into disk utility to repair disk and I still seem to have the same problem .. No icons or apps or anything lol just the cursor I can only shut down the laptop via power but and the press shut down.
    Please help I am going out my mind with this thing :(
    Thanks x jade

    This can be used to boot the machine and delelte enough files to get it to boot normally.
    .Create a data recovery/undelete external boot drive
    Read about storage drive so you can store your extra stuff.
    Most commonly used backup methods
    Also here to see how a full boot drive slows the machine down
    Why is my computer slow?

  • My MacBook Pro was stolen last night. I need the serial number. It is not showing up on my devices list. My iPads and iPhones are. I have used it to to sync my phones and pads as well having it registered with apple. Any thoughts? Thanks

    My MacBook Pro was stolen last night. I need the serial number. It is not showing up on my devices list. My iPads and iPhones are. I have used it to to sync my phones and pads as well having it registered with apple. Any thoughts? Thanks

    Click here: https://supportprofile.apple.com/MySupportProfile.do
    SIgn in with your Apple ID, the same one you used to access this support forum.
    Hopefully, you will see a list of all the devices you registered with your Apple ID, including their serial numbers. Let me know how this works out.
    Edit to add: If you enabled "find my imac" on your Pro, you ought to be able to remotely lock it, or even wipe its memory. Click http://www.icloud.com/ sign in with your Apple ID and click the big green "find my iPhone" icon (nevermind the name, it will find all your devices provided they're running Lion or iOS 5).
    Then file a police report and nail the b*****d.

  • I have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, help

    i have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, any help would be much appreciated

    Try the other USB port. If it still doesn't show up in Disk Utility then there may be something wrong with your Mac. Try something else in each USB port and see if it is seen. If the other thing, like a USB thumb drive, does show up in disk utiltiy then the USB ports are fine.
    Power down the system and restart with the drive connected, go to DU and see it it is seen.

Maybe you are looking for

  • Need to know the table for sales org and sales area of role Sold-to  in CRM

    Dear Sir, Our server is CRM 5.0, I would like to download the data from CRM , however, I would like to know the table name which keep the sales org and sales area of role Sold-to  in T-code : BP . However, we can't find the actualty table. Please kin

  • TV not displaying DVD video from Macbook but showing slideshow instead

    Connecting new MacbookPro to new LCD TV with newly purchased cables as follows: miniDVI to DVI converter connected to mini DVI port on Macbook and to DVI/HDMI cable which is connected into HDMI port on TV. Audio connected via standard one to two audi

  • Problem with Progress DB while using to connect using JDBC Adapter

    Hi,   I am facing Problem with Progress DB while using to connect using JDBC Adapter. I am getting the following error in auditlog file like, Error during database connection to the database URL  jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbad

  • Incoming Invoice: MIR4 User Exit

    Hi gurus. I have a requirement to add a new tab when you run TCODE - MIR4. This new tab would be on the same level as existing tabs i.e. 'Basic Data  'Payment',  'Details',  'Tax' etc. Does anyone know the user-exit/screen exit that I can use to achi

  • BAPI to insert text EENO_DYNP-ZEILE

    Dear All. We are facing an scenario in which we need to insert text in field EENO_DYNP-ZEILE vía BAPI or BATCH for CONNECTION OBJECT AND DEVICE LOCATION. Our question is *¿Do you know the BAPI-FIELD which store this long text? Thanks in Advance. Nico