Macbook Pro 9,1 stuck after boot

There doesn't seem to be a tutorial on the wiki for Macbook Pro 9,1 specifically (it skips from 8,* to 9,2). I've been following https://wiki.archlinux.org/index.php/MacBook
I already have an Ubuntu partition installed on this machine in addition to OSX. I am using rEFInd as the boot loader. I also got an EFI USB (I think) with Arch on it.
I created the "free space" partition. When I booted with the USB, Arch showed up in the rEFInd menu and was able to boot from the USB.
Now the area where I'm stuck is at https://wiki.archlinux.org/index.php/MacBook#EFI_2. I assume you're supposed to run `cgdisk` on *something*, but what? The entire drive or the target partition? I'm also not sure how to do the "delete the partition you just made" step (why, it's already free space?) and the +128M instruction is confusing.
Assuming that that all gets done, I find the https://wiki.archlinux.org/index.php/Of … tall_Guide instructions very unclear. There are no specific commands. I guess you're supposed to do what you want to do, but I need more guidance than that. For instance I have no idea what to do at the "Format Disks" step, and the "Create an UEFI System Partition in Linux" says to use GParted, but at this point I have no GUI for Arch since it's running off the USB. The wiki also seems to say that an Internet connection is necessary to complete installation, but at the same time the connection does not work out of the box. I can't install the wifi drivers since Arch is still running off the USB, but then apparently I can't install Arch on the machine without Internet.
I was also following the tutorial here: http://www.muktware.com/5451/how-install-arch-linux as it has clearer commands, but it seems to be outdated. I'm wary of experimenting because I somehow corrupted my installation of Ubuntu and was no longer able to access it -- I had to reinstall it.
I also get the feeling that it would be much easier to install Arch from Ubuntu (which I have running), especially since this exists: https://github.com/brain0/genbootstrap -- but I'm even confused about that. Specifically the instructions say "Create your partitions and mount them..." Why would I need more than one partition? I'm also not sure that this will play nice with the Macbook hardware/EFI/rEFInd.
Any advice?

You'll run cgdisk on the drive. Those instructions are assuming you created a partition for arch with OS X's tool which was in the previous section - if it is just free space, you will not need to delete a partition, just create one.
The installation guide correctly redirects you to the beginners guide if you aren't experienced installing arch. Follow that link. You will skip the partitioning steps as you have just done that. An internet connection is necessary ... so provide some information about the errors you are getting if you want help with that.
Don't follow guides on other websites. If you opt to do so, no one here will be able to help when you have problems.

Similar Messages

Macbook pro 5,1 freezing after boot

I installed arch on macbook pro 5,1 and it boots, but seems to freeze at waiting for udev uevents to be processed. I was able to get it to boot with acpi=off, but it acpi used to work in the past. Does anyone know how to get it working again, or should I just downgrade the kernel?

Thank you for the reply. Yes, I forgot to mention, I did test with the latest kernel (2.6.39). In fact, I have tested with several ways to install Arch, like net-install (which gives me the current kernel after installation) and even archboot 2011.05. None of them get me pass UDev uevents. I looked around on the internet and one old post report a successful install using the installing CD instead of netinstall. So I suspected it's the newer kernel giving us troubles on Mac After installing from CD (not netinstall) one boots into the system 2.6.33 but then ran into the same problem after pacman -Syu (which upgraded the kernel only to 2.6.34) but adding apci=off let the system boots again.
Unfortunately, I don't know even to carry the investigation further. But I think it's important for the community to look into this. Mac is a popular platform.
I will have this Mac (MacBook Pro 5.1) on my disposal for little while and be willing to do some more test on it. If anyone has suggestion, I'm more that willing to try.

MacBook Pro Retina 2013 stuck on boot every time after iPhone 5S is connected to it.

I have a MacBook Pro Retina 2013 and I've noticed that every single time I connect the iPhone 5S to it at the next boot the Mac hangs.
Booting in Safe Mode will eventually work (after about 20 minutes).
I can reproduce this every single time with this combination. Any advice?

You can try resetting the PRAM and SMC, but both of your devices are new. You can just make a Genius Bar appointment and let them figure it out.
SMC
http://support.apple.com/kb/ht3964
PRAM
http://support.apple.com/kb/PH14222

MacBook Pro 15" not responding after boot-up?

My MacBook Pro 15” has an issue and won’t work! Yesterday I went to my MB to load it up for my daily commute into the city. As I was loading my bag I tried to disconnect my ext. backup drive that works via Time Machine.
When I left it the night before for its nightly back-up everything was five by five. However in the morning I couldn’t disconnect the device nor did my trackpad work (no mouse cursor). I was forced to perform a cold shut-down.
When I returned home last night I initiated a power up on my MacBook Pro. Everything booted up fine however I didn’t have control of the trackpad. My keyboard didn’t work either. I shut it down and repeated the process a few more times. Each time after the boot-up I had the same problem. I can see the mouse cursor, but have no control and the keyboard will not respond to any key being depressed.
Does anyone know what is wrong my MacBook Pro, beside user error or the “Nut behind the wheel?”
Any help or suggestion would be appreciated.
Cheers~
Message was edited by: Fish Eye

Michael Flynn wrote:
Did you try booting up using the system disk? By rebooting into the system disc, will test whether the keyboard problem is localized to the installed version of OSX or a larger problem.
Here is a little follow up. I went home and tried the system disk. No luck, now I have a system disk in my machine that I cannot remove because the eject button doesn't work.
I took my MBP to the Genius Bar as scheduled. The “Genius” did the normal reboot and head scratch test. However when he plugged in an external mouse and keyboard, voila Bob’s your Uncle and it worked. Hi expert firm determination had concluded that the trackpad and keyboard were no functioning on my MBP…
The trackpad and keyboard are connected to the motherboard via a ribbon cable that had been fried at the connection. They will be keeping “left brain” for the next few days to RR the trackpad and keyboard.
The good news is that I have the service plan that will cover all expenses and parts. It was worth it to spend the few extra monies upfront, because I could only imagine what this would cost without it.
The other good news is that they will not send my MBP to the Tennessee repair depot, it will stay at the store to be worked on.

Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.)

Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.). I made a clean installation because I needed to go from 32 bit to 64 bit.
Or should I just update bootcamp in Lion? (cause when I search for "boot camp" in Windows 7 there's no result)

Installation Guide
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
Apple Boot Camp Support
Lion's Boot Camp Assistant 4.x should have downloaded Apple drivers as part of also partitioning.
You need Apple drivers. And you then need to add on your own audio driver.
You can run Assistant at any time to download and save a set of drivers.

My macbook pro started acting strange after a safari reset. the mouse no longer: animates the dock, activates hot corners or selects pages from the 'top sites' page.

my macbook pro started acting strange after a safari reset.
the mouse no longer: animates the dock, activates hot corners or selects pages from safari 'top sites' (without a hassle). attempts to reset dock and hot corners from preferences has been fruitless
the mouse also gets 'stuck' in logic precipitating force quits.
i run osX 10.6.8 on a 2007 macbook pro that has had 2 motherboards replaced autumn 2010.
my troubleshooting has been: restart, pRam and safe boot, also checking a 'test' account to find the same issues extant.
pRam restart caused airport to quit and say there is no airport card, and wouldn't respond untill another reboot.
macbook pro 15" 2.4 GHz intel core duo.2 GB 667 MHz DDR2 SDRAM.
i have treated this book with care, yet run logic pro studio to the limit of this book's abilities.
what shoud i do?

You don't say which year you have, however...
...there are known problems with the mid-2010 models (see http://support.apple.com/kb/TS4088?viewlocale=en_US&locale=en_US) as well as early and late 15" 2011 models (see https://discussions.apple.com/thread/4766577?tstart=0).
Apple has taken ownership of the problems with the 2010 model but, unfortunately, the free logic board replacement for that model has probably long expired for you - three years after date of purchase.
One the 2011 models Apple has admitted no defect. You'll just have to skim the articles to get an overview of the problems that people are having (usually showing up as screen glitches at first and then going downhill from there).
Good luck,
Clinton

My macbook pro just gets stuck at grey startup screen

my macbook pro just gets stuck at grey startup screen

Reinstall OS X:
Reinstall Snow Leopard without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
OR:
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

MacBook Pro (Mid 2010) will only boot in safe mode.

I've been unable to boot my MacBook Pro normally. It will boot in safe mode, and, until today, I was able to get a normal startup after resetting both PRAM and SMC. Running "Repair Disk" on the startup disk did not reveal any problems. I have also done a recovery boot to reinstall OS (10.9.1), which did not help either, though I did not wipe the hard disc first (I did back it up).
Had to take it to Apple back in January when the screen started acting funny, i.e. getting static-y and going blank for seconds at a time but then coming back. Their tests showed that there were no hardware problems, and the screen issue was eventually resolved by doing a PRAM reset. About 14 months ago, I had the logic board replaced.
Also, I'm not sure if this is related, but when I have been able to boot normally, if I quit Google Chrome, the machine will freeze completely.
Ran EtreCheck; here's the info from that:
Hardware Information:
          MacBook Pro (15-inch, Mid 2010)
          MacBook Pro - model: MacBookPro6,2
          1 2.66 GHz Intel Core i7 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics - VRAM: 288 MB
          NVIDIA GeForce GT 330M - VRAM: 512 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 0:50:36
Disk Information:
          ST9500420ASG disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 499.25 GB (146.37 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-898
USB Information:
          Apple Inc. Built-in iSight
          Apple Computer, Inc. IR Receiver
          Apple Internal Memory Card Reader
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Configuration files:
          /etc/hosts - Count: 15
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.adobe.SwitchBoard.plist 3rd-Party support link
          [System] com.google.keystone.daemon.plist 3rd-Party support link
          [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
          [invalid] com.oracle.java.Helper-Tool.plist
Launch Agents:
          [System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
          [System] com.adobe.CS5ServiceManager.plist 3rd-Party support link
          [System] com.divx.dms.agent.plist 3rd-Party support link
          [System] com.divx.update.agent.plist 3rd-Party support link
          [System] com.google.keystone.agent.plist 3rd-Party support link
          [invalid] com.oracle.java.Java-Updater.plist
          [System] com.wacom.wacomtablet.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
          [not loaded] com.mlbam.nexdef.core.NexdefLoader.plist 3rd-Party support link
          [not loaded] com.mlbam.nexdef.plist 3rd-Party support link
          [not loaded] com.spotify.webhelper.plist 3rd-Party support link
User Login Items:
          XPSLauncher
Internet Plug-ins:
          AdobePDFViewerNPAPI: Version: 10.1.9 3rd-Party support link
          Flash Player: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
          McGraw Hill ChemDraw: Version: 12.0.3 3rd-Party support link
          DivX Web Player: Version: 3.0 - SDK 10.5 3rd-Party support link
          AdobePDFViewer: Version: 10.1.9 3rd-Party support link
          WacomNetscape: Version: 2.1.0-1 - SDK 10.8 3rd-Party support link
          googletalkbrowserplugin: Version: 5.1.4.17398 3rd-Party support link
          iPhotoPhotocast: Version: 7.0
          DirectorShockwave: Version: 11.6.5r635 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          FlashPlayer-10.6: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
          npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 3rd-Party support link
          Silverlight: Version: 5.1.20125.0 - SDK 10.6 3rd-Party support link
          OVSHelper: Version: 1.1 3rd-Party support link
          Google Earth Web Plug-in: Version: 6.1 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          Flip4Mac WMV Plugin: Version: 2.4.4.2 3rd-Party support link
          o1dbrowserplugin: Version: 5.1.4.17398 3rd-Party support link
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
          WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 3rd-Party support link
          JavaAppletPlugin: Version: 14.8.0 - SDK 10.9 Outdated! Update
          AmazonMP3DownloaderPlugin101736: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 3rd-Party support link
Safari Extensions:
          ClickToFlash: Version: 2.7.5
          ClickToPlugin: Version: 2.7.5
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
          WebEx64: Version: 1.0 - SDK 10.6 3rd-Party support link
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
          Flip4Mac WMV 3rd-Party support link
          Growl 3rd-Party support link
          Perian 3rd-Party support link
          WacomTablet 3rd-Party support link
Old Applications:
          None
Time Machine:
          Skip System Files: NO
          Mobile backups: OFF
          Auto backup: NO - Auto backup turned off
          Volumes being backed up:
                    Macintosh HD: Disk size: 464.96 GB Disk used: 328.64 GB
          Destinations:
                    G-DRIVE [Local] (Last used)
                    Total size: 465.64 GB
                    Total number of backups: 1
                    Oldest backup: 2013-07-27 20:13:09 +0000
                    Last backup: 2013-07-27 20:13:09 +0000
                    Size of backup disk: Too small
                              Backup size 465.64 GB < (Disk used 328.64 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               1%          hidd
               1%          EtreCheck
               1%          WindowServer
               0%          mds
               0%          Google Chrome
Top Processes by Memory:
          180 MB          Google Chrome
          168 MB          com.apple.IconServicesAgent
          111 MB          Finder
          77 MB          Google Chrome Helper
          74 MB          Dock
Virtual Memory Information:
          850 MB          Free RAM
          1.80 GB          Active RAM
          839 MB          Inactive RAM
          432 MB          Wired RAM
          584 MB          Page-ins
          0 B          Page-outs
Any ideas are much appreciated!

First try doing a Software Update.
Then restart and see if that works.
If not then I would update Java.
Restart and see if that works.
If not then delete the following plist items.
[invalid] com.oracle.java.Helper-Tool.plist
[invalid] com.oracle.java.Java-Updater.plist
Should find these in:
/Macintosh HD/Library/LaunchAgents
/Macintosh HD/Library/LaunchDaemons
Now restart & see if that works.
If that doesn't work try deleting everything in:
/Macintosh HD/Library/StartupItems
Hope this helps.

2007 macbook pro keeps restarting won't boot up

Hello,
I have a fairly old MAcbook Pro (2007). Recently, after rrsinsatlling and erasing the hard drive, my MBP will not Boot up. Ive tried Resetting PRAM, SMC, etc. The symptoms are as follows.
the chime then apple logo---then it RESTARTS. I can't open in safe, or verbose, or run Apple hardware test. since it just restarts. I can't boot from DVD or External Flash drive because it just restarts after selecting the alternate startups. I also can not boot from the recovery HD because it just restarts. the only thing that delays the restart is if I don't select a startup disk after holding the option button. or if i hold the N key...at which point after about a minute or so of searching for a network disk it restarts. when i hold down the V i would see a few lines of code and it then restarts. It will continue to restart for hours until I disconnect the power adapter. (finally there is no battery in the device and hasn't had once for over 3 years when it exploded. Please help
Thank you.

I also have a Late 2007 MBP 15" that, after 5.5 years, finally succumbed to the Nvidea curse. Nvidea sold Apple a lot of video chipsets (yes, if you have a 2007 MBP, you could have the Nvidea curse) that were faulty and would fail with heat. Mine failed during a software update too.
Aple had a repair extension program for this but it expired in December 2012.
I called around a lot, finally calling Cupertino to be told the 2007 MBP not longer qualifes for a flat-rate repair due to a lack of parts.
My point is you may not be able to get the flat-rate repair. I replaced mine with a refurb entry-level 13-inch MBP that nearly twice as fast, has over 4X the hard drive space, and cost half of what the old MBP did. That was after getting several estimates for a new logic board from third-party service centers that where in the US$500-900 range. I paid US$1020 for the refurb 13-incher.

My macbook pro is very slow after instal OSX

My macbook pro is very slow after instal OSX

Fixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

My macbook pro is very slow after installing mountain lion

my macbook pro is very slow after installing mountain lion? Is anyone else having this issue?

If you don't use an SSD and bump your RAM up to 8 Gb's you may experience slow speeds, but I noticed slow speeds with your general configuration in SL.
one thing you should consider right now is, Spotlight is Reindexing your hard drive, that takes time and resources, (resources which you don't necessarily have to spare).
If you continue feeling like your performance is slow, you have a few options with this computer (I have the same one).
the express card slot can house a wintec SSD drive. That little door on the side of your machine is pure gold for a really quick solution for speeding up your machine. I have one in mine right now i'm using as a scratch disk for CS6 but I used to boot from it, and the speed boost was out of this world.
You could take out the internal HDD and put in a new SSD (I have a Vertex 4 from OCZ) it is completely over kill but my experience is pretty fast and I keep up with the later MBP models colleagues have.
There are some other options for you like taking out the optical drive (however I don't know if I'm supposed to talk about that here). Google Data Doubler.
You need to also set it to always use the 9600 chipset, this will increase performance a lot too. to do this go to system preferences>energy saver>Better Performance. This switches the video card to the better one and makes a world of difference.
Lastly, your RAM. after an EFI Firmware update, our computer support up to 8GBs of RAM. Do it!
Late 08 MBP 2.53 GHZ 9600 chipset 8gb ram, Vertex 4 SSD

Why is my Macbook Pro slow to wake after sleep?

Why is my Macbook Pro slow to wake after sleep?

I am having the same issue. I hook it up to the charger in the evening and close the lid. When I go to use it the next time it takes a good 30 seconds or so to wake up. The screen shows the log in screen but typing doesn't work and the cursor is frozen. Sometimes it will even give the rainbow wheel for the cursor, so it seem like it is processing whatever to get going. I also notice that my battery won't be fully charged at anywhere from 95%-99% after being charged a full evening. What can I do to change whatever is happening because it is pretty crappy to charge it all night expecting to have a full battery for the next use, plus the issue of having to sit there waiting for it to boot every time.

Macbook pro runs really slow after sleep mode

My MBP ( MacBook Pro (13-inch, medio 2012), 2,5 GHz Intel Core i5, 8 GB 1600 MHz DDR3, Intel HD Graphics 4000 1024 MB), runs very slow after sleep mode. I notice that when I wake it up, my memory usage is nearly 8 GB. After a restart it is back no a normal level, between 2 and 5 GB depending on how many programs I am running. Any ideas what causes this? My IOS is Yosemite 10.10.2
Kind regards

Hi Japib
Thanks for your reply. Here is my report:
Problem description:
macbook pro is really slow after sleep mode
EtreCheck version: 2.1.8 (121)
Report generated 4 februari 2015 20:56:34 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
    MacBook Pro - model: MacBookPro9,2
    1 2.5 GHz Intel Core i5 CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 172
Video Information: ℹ️
    Intel HD Graphics 4000
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 1:36:41
Disk Information: ℹ️
    APPLE HDD TOSHIBA MK5065GSXF disk0 : (500,11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 498.88 GB (292.17 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 499.25 GB Online
    MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
    Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Application Support/Hotspot Shield
    [not loaded]    com.anchorfree.tun (1.0.1) [Click for support]
        /Library/Application Support/Kaspersky Lab/KAV/Bases/Cache
    [loaded]    com.kaspersky.kext.kimul.44 (44) [Click for support]
    [loaded]    com.kaspersky.kext.mark.1.0.5 (1.0.5) [Click for support]
        /Library/Extensions
    [loaded]    com.kaspersky.kext.klif (3.0.4a41) [Click for support]
    [loaded]    com.kaspersky.nke (1.6.4a15) [Click for support]
        /System/Library/Extensions
    [loaded]    com.hzsystems.terminus.driver (4) [Click for support]
    [not loaded]    com.olympus.CamBlockCommandsDeviceUP (3.1.0 - SDK 10.6) [Click for support]
    [not loaded]    com.roxio.BluRaySupport (1.1.6) [Click for support]
    [not loaded]    com.sony.driver.prs2 (1.0.3d1) [Click for support]
    [not loaded]    com.wacom.kext.pentablet (5.3.3 - SDK 10.8) [Click for support]
        /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
    [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
Launch Agents: ℹ️
    [running]    com.epson.Epson_Low_Ink_Reminder.launcher.plist [Click for support]
    [failed]    com.epson.esua.launcher.plist [Click for support] [Click for details]
    [running]    com.epson.eventmanager.agent.plist [Click for support]
    [running]    com.kaspersky.kav.gui.plist [Click for support]
    [not loaded]    com.sony.ReaderDesktop.RunReaderDesktop.plist [Click for support]
    [not loaded]    com.trusteer.rapport.rapportd.plist [Click for support]
    [running]    com.wacom.pentablet.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.anchorfree.ajaxserver.plist [Click for support]
    [running]    com.kaspersky.kav.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.trusteer.rooks.rooksd.plist [Click for support]
    [loaded]    com.tunnelbear.mac.tbeard.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
    [loaded]    com.valvesoftware.steamclean.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Programma (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Documenten    Map (/Users/[redacted]/Documents)
    uTorrent    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
    BambooCore    UNKNOWN (missing value)
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: Java 7 Update 60 Check version
    WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    Flash Player: Version: 16.0.0.296 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
User internet Plug-ins: ℹ️
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
    AdBlock
    DuckDuckGo
    Save to Pocket
    Awesome Screenshot
    URL Advisor
    Virtual Keyboard
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Squeezebox [Click for support]
    Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 498.88 GB Disk used: 206.70 GB
    Destinations:
        My Passport [Local]
        Total size: 999.83 GB
        Total number of backups: 17
        Oldest backup: 2013-11-06 17:55:38 +0000
        Last backup: 2014-10-14 11:30:39 +0000
        Size of backup disk: Adequate
            Backup size 999.83 GB > (Disk used 206.70 GB X 3)
Top Processes by CPU: ℹ️
        15%    mds
         5%    WindowServer
         0%    ocspd
         0%    fontd
         0%    kav
Top Processes by Memory: ℹ️
    223 MB    kav
    198 MB    Safari
    155 MB    Mail
    137 MB    mds_stores
    77 MB    WindowServer
Virtual Memory Information: ℹ️
    3.45 GB    Free RAM
    3.05 GB    Active RAM
    1.11 GB    Inactive RAM
    974 MB    Wired RAM
    1.64 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Feb 4, 2015, 07:21:16 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/EPSON Software Updater Agent_2015-02-04-192116_[redacted].crash
    Feb 4, 2015, 07:18:08 PM    Self test - passed
Hope this will shed some light on the problem.

Macbook Pro cannot start properly after Yosemite v10.10.3 update

Hello,
I have a serious concern with my MacBook pro 13Inch Retina. After the recent update to Yosemite v10.10.3 on 18 April, whenever I start my Mac book, the Apple icon will not show up immediately as usual just black page. It only appear after I press the power bottom again( or sometimes by luck a 5 mins wait) then the icon will appear and system turns into login page. This is not normal!
Anyone please help! I am not sure if I were the only one experiencing this or this is a bug come with the recent update.
Thanks!

Repair the Hard Drive and Permissions - Yosemite, Mavericks, Mountain Lion or Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu. Select Restart from the Apple menu.
Now, download and install the OS X Yosemite 10.10.3 Combo Update.

MacBook Pro (mid 2007) freezes after upgrade to Mavericks

Hello,
After the upgrade to Mavericks my MacBook Pro (mid 2007) freezes after a couple of minutes of usage - after successful install and the use of some apps. Not bad enough the system is now always crashing if I try to boot. PM reset didn't help. Booting from the restore partition was possible, but I decided to go back to a working backup of 10.8.4 made a minute before I tried to upgrade. Why 10.8.4? Because 10.8.5 causes the strange problem that the Mac freezes after wake up from sleep.
Any suggestions?
Anyone else having this problem?
Kind regards

I did a clean install of mavericks on my MBP (mid 2007) and still it freezes at arbitary points. The very first time when it booted up it worked for longer and when I started to apply updates from app store, it froze. Successive boots froze much early, like within few seconds of booting.
I am going to check this by booting in safe mode. I am losing hope with mavericks on my MBP (mid 2007) and will switch back to snow leopard (10.6.8) which was working seemless.
I checked so many things, based on other posts to make sure if my MBP is really Mid 2007. IT IS.
Rgds,
Raj.

Macbook Pro 9,1 stuck after boot

Similar Messages

Maybe you are looking for