MacBook Pro A1297 ... re-install for sale
Hi,
I am planning on selling my MacBook Pro A1297 17" Laptop - MC725LL/A (2011)
but I have misplaced the original factory install disk (snow leopard 10.6.6) that came with the machine.
I have been trying to locate those disc online to purchase, but with no luck.
Apple sells a retail copy of Mac OS X 10.6 Snow Leopard, but I wanted to be sure that this version will work without issues for my machine.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard?afid=p231%7 Ccamref%3A11l4k&cid=AOS-US-AFF-PHG
Any assistence will be greatly appreciated.
The Mac OS X Snow Leopard disc sold by Apple includes Mac OS X 10.6.3, which is a version released before your MacBook and which is not supported, because the minimum OS X version supported by your MacBook is Mac OS X 10.6.6.
To get the discs that came with your MacBook Pro, call Apple > http://support.apple.com/kb/HE57
Similar Messages
-
How do I reset MacBook Pro to original settings for sale?
I want to reset a slightly used MacBook Pro to original factory settings... plan to resell on eBay. Thanks!
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License. -
I have a cd rom for my italian class, but am unable to load it on my macbook pro with Mavericks installed.
Someone has said i need Rosetta, but understand that Apple stopped installing this!1
Can anyone suggest anything to help me??Many educational CDs have not been upgraded due to lack of funds in the educational market to pay for the such updates.
This situation is due primarily to the fact that one of the major political parties in this country favors tax cuts to the rich while cutting federal educational support funding (or eliminating the federal Department of Education altogether).
However, you can restore Rosetta and run your educational CD if you install Snow Leopard Server ($20) into Parallels (up to $79) for use in Lion/Mt. Lion/Mavericks:
[click on image to enlarge]
More information here:
http://forums.macrumors.com/showthread.php?t=1365439 -
Few days back I installed Autocad 2014 in my macbook pro 15" early 2012.For few days it worked fine but since last two days I'm getting graphical lag in my mac. Finger gestures and dock movement all seems to be lagging badly.Please help.I'm using mavericks
We regularly use Cocktail by Maintain software. You run the whole gamut of options but the important one is in System - Databases - Rebuild launch services. Also in Files - Caches - then clear the lot.
This is just houskeeping really but there are so many 'links' in A/cad it needs 'cleaning' -
I installed mountain lion over snow leopard and my macbook pro 13" taking time for login and logout,
i installed mountain lion over snow leopard and my macbook pro 13" taking time for login and logout.. any solution
Hi JoeyR. Well, according to this link at the Apple Store, OS X Moutain Lion became available in July and I downloaded it for $19.99. I figured I would do that before renewing my Norton security SW. Are we talking about the same thing?
http://www.apple.com/osx/ -
my macbook pro was first installed with leopard and bootcamp 3.2 under windows 7. After update to lion it is no more possible to update bootcamp to 3.3. or 4.0. The report: The installation source ist not correct. What can i do?
auf Deutsch:
Auf meinem Macbook pro war Leopard und bootcamp 3.2 unter windows 7 installiert. Nach dem update auf lion kann bootcamp nicht mehr upgedatet werden. Weder auf 3.3. noch auf 4.0. Folgende Fehlermeldung kommt: Boot camp Dienste: Das installierte Produkt stimmt nicht mit der Installationsquelle überein. ... Was kann ich tun?It means what it says. The "computer person" formatted it wrongly/ unsuitably. it needs to be formatted again.
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Mylenium -
How do I reset my MacBook Pro (2008) after installing Mavericks?
Hello,
My MacBook Pro is very slow, which could be due to age.
However, before I just get a new one, I want to try to reset it and basically clean it properly. I have never done that and hope that this could be the solution to the issue.
However, I simply do not know how to do it.
I tried reinstalling Mavericks but it does not offer this option..
Help anyone?
Thank you very much,
IngkeYou need the original discs that shipped with your MacBook Pro in 2008. If you don't have them, you can call Apple (phone # at bottom of page) and, with your serial number handy, order a new set. Cost will be about $25 including shipping & taxes, I believe.
Once you have your original discs, follow the instructions in Thomas Reed's -> How to prepare your Mac for sale. After you've completed those steps, you'll have a 'clean' MacBook Pro, ready to install updates, software, etc.
Good luck,
Clinton -
There was some updayts for my iPad 4 automatically downloaded. After installing it, the iPad began to restart itself every few minutes.
I tryed to update my iPad using iTunes. After connecting to MacBook Pro, where is installed all latest software, iPad is recognised as "iPad", Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error occured (3). Tried many times, not results. And now iPad stays only in recovery mode, can't switch it off. How can I solve this problem please?When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547
-
How to download macbook pro (mid 2010) drivers for windows 7, without the included DVD (lost) ?
Hello everyone,
I am facing a problem with bootcamp on my Macbook pro 15" (Mid 2010, running Mos OS 10.6.6).
I have successfully installed windows 7 via Bootcamp, but I lost the Drivers DVD furnished by Apple.
I tried to download these using Bootcamp (v3.0.4), but bootcamp won't let me save it, i get this error :
"the windows support software could not be saved to the selected folder"
An Apple support article has been made for this problem ( http://support.apple.com/kb/TS3648 ), but it doesn't solve the problem in my case because I lost the furnished DVD.
So here I am, struck on this drivers issue...
So, my question is :
How to download macbook pro (mid 2010) drivers for windows 7, without the included DVD (lost) ?
Thank you for your help !
RegardsAw, and I forgot, being in Thailand, they do not sell the installation DVD.
-
I have previously installed Microsoft Office Student Edition 2011 on my MacBook Pro. While installing Microsoft Office 2008 Windows; message prompts to delete Microsoft Office 2011. Is there a way around this issue?
Office 2008 was a Mac version. The equvalent Win version is 2007. So there is no "Office 2008 Windows." Which version are your trying to install?
Are you using Boot Camp to run Win on your MBP and want to install Office for Win there? I can't see that being a problem..
I do know that the regular version of Office Mac won't run properly if the trial version is present. The installer is set up to look for other versions, resumably to keep the trial version and the regualr from clashing.
Office Mac 2011 is equiv to Office for Win 2010
Office Mac 2008 " " " Office for Win 2007
Office Mac 2004 " " " Office for Win 2003 -
Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?
after a restart it works for a time, but always slow. I went to the Applestore this afternoon and the made a check and said it would be the logicboard and they would have to change it for CHF 600 and it would be ready in 10 - 15 days
-
I have a new MacBook Pro with Iphoto installed when purchased. When editing a photo, primarily orientation changes, the slideshow initially displays the photos in proper orientation. However, after leaving Iphoto and shutting down the computer, and then going back to run a slideshow the photo displays back to its' original orientation, that is, the edit-change was not saved. Please help...the program information says all edit-changes are automatically save and therefore there is no save command, but my changes are not being saved...thank you for any suggestions...HM
what version of iPhoto and of the OS?
Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
LN -
I am trying to install a brand new WD 500 gb sata internal hd in my macbook pro. the original install dvd does not recognise the hd. all hardware is ok. any help?
For some reason OS X disks (whatever edition or flavors) that are supplied with Apple products only seem to contain a limited knowledge of available hard drives on the market at the time of thier publishing. This (rather opportunistically) creates a "Best Before" stale-OS X-software-copy situation where upgrading to or replacing a defective internal SATA hard drive with a newer, better or larger one is a largely hit and miss affair.
If you buy the latest and greatest disk drive available for any older Mac you are likely to run into unresolvable problems making a clean re-install of your own, old edition or flavor of OS X onto any newer or larger hard drive since the OEM (gray) "OS X Install Disks" that Apple supply with retail products seem to contain only time-sensitive lists/mapings of then-known target drives that the Drive Management Tool in the then-published old "Installer Software" will support.
Presumably new (colorful "X") retail versions of OS X (10.whatever.whatever) also contain time-limited Installers with limited knowledge of and adaptability to/compatability with a limited number of old hard drives then kicking-around on the market.
This is especially a problem nowadays since the countless "puny old" hard drives that have been on the market are largely obsolete in a few months time, as manufacturers continue to produce larger and cheaper units, discontinuing older puny products... So if your drive fails you need an exact old (or similar familial) replacement drive for your "backup copy of OS X" to do a fresh, clean OS X re-install. Otherwise you need to purchase a new retail version of OS X, since yours is now effectively obsolete. Purchasing an old, puny drive to re-install your version.flavor of OS X to avoid buying a new version of OS X is a rather false economy.
If you still have a working old hard drive with your old polluted 10.version.flavor of OS X still working on it you apparently must clone it with Time Machine or the newest version of Disk Utility (disk image copying) to most newer, larger drives, and a clean reinstall to such new hard drives is not possible. -
I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?
Sometimes deleting the account and then re-creating it can solve this issue
Write down all the information in accounts before doing this
Highlight the account on the left and click the minus button
Then click the plus button to add the new account and follow the prompts -
I am trying to connect a Macbook Pro to a projector for a Powerpoint presentation. When I use a VGA cable, the color of the projected images are not good. When I use a USB cable, the projected image includes the presenter notes on my computer screen?
To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
and select the Library that you moved. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Your first option didn't work because you imported one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
Your second option didn't work because you simply referenced her library on the old machine.
Regards
TD
Maybe you are looking for
-
Windows Phone 8 Can't Update listbox item in XML file after using hardware back button?
Hi All i have a list box and i am saving list box selected item in XML file thats working fine but the problem is that when i will close my app and reopen and add more value to list box my previous value is removed form the xml file and listbox also
-
What is the best way to read, process, and write an Excel File Server side...SQL Server Agent Job
So I was using dynamic Excel commands to open and save as using... Microsoft.Office.Interop.Excel.Application and workbook.SaveAs(StringDestinationFile, XlFileFormat.xlExcel8, Type.Missing, Type.Missing, Type.Missing, Type.Missing, XlSaveAsAccessMod
-
White line across top of edit page of elements 8 version
White horizontol line on the top of page when editing in elements 8 version?
-
Insert Text file based on URL Parameter
Hello! I have been able to get data to load using PHP into my document. BUT - that is only data that is IN the URL. So, for example, the URL might be ...index.php?profile=123456789 In that case I can make the customer ID appear in all the other URLs
-
How to import ALL MAIL from Gmail to OSX Mail?
I am trying to migrate my mail system over to OSX Mail from Google Mail, but I can't seem to make "All Mail" show up as an option in OSX Mail, even though I have the folder checked in the Gmail settings to share with outside apps. I am on Yosemite