MacBook Pro AC Cord

Does it matter which power cord I get for my late 2008 MacBook Pro laptop

if it is a 13" MBP, use a 60 watt power adapter.  Otherwise use a 85 watt adapter.
Ciao.

Similar Messages

  • Use MacBook Pro power cord with iPad?

    Hi all - if I remove the two prong AC plug from the iPad's power brick, the exposed connector looks like it will accept the extension cord that was included with my MacBook Pro's power brick. Is there any reason I couldn't use the Mac's cord with the iPad's power brick this way? I assume not but just want to be safe.

    Hi,
    Is there any reason I couldn't use the Mac's cord with the iPad's power brick this way? I assume not but just want to be safe.
    Not is correct.
    Only use the cables and the 10W USB Power Adapter that came with your iPad. Otherwise you could damage the hardware and void your iPad warranty.
    If you are running v10.4.8 on your Mac as your profile suggests, be aware the minimum system requirements for the iPad for Mac is v10.5.8 as noted here.
    iPad Tech Specs
    Carolyn

  • NEW macbook pro power cord not working

    I just bought my macbook pro 3 weeks ago and for some reason my power cord is not working to charge the computer. There doesn't appear to be any damage to it and I've tried plugging it in to different outlets etc. and no luck. I noticed one day that it was blinking on and off from charging and not charging and then the next day it just stopped working completely. Is this a common thing? Should I just go buy a new one?

    Welcome to Apple Discussions!
    Your power adaptor is under warranty as well as your new Mac. If it isn't working, Apple should replace it for free under warranty.
    You might want to try resetting the SMC:
    http://support.apple.com/kb/HT1411?viewlocale=en_US
    This is likely the first thing they would do at the Apple Store, and it may well solve the charging problem.
    Good luck!

  • Exposed MacBook Pro power cord

    This is happened before, but I forgot where I got a free replacment. The power cord for MacBook Pro ripped from pressure where it naturally bends. I don't feel comfortable with the wires being exposed. Do I call Apple's general 1-800 number. If so, which option do I press? I no longer have a warranty on my MacBook Pro, but this tear was due to how the power cord is constructed or not any damage I did to it.

    I would make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    BTW, this is the Mac Pro desktop forum

  • MacBook and 17" MacBook Pro Power Cords Interchangable?

    Can I use the adaptor/charger (both are MagSafe) from my MacBook on my 17" MacBook Pro? Is it safe? Will it harm the the battery?

    You cannot. The MacBook Pro uses an 85W power adapter, while the MacBook comes with a 65W adapter. You can safely use the MBP's adapter with the MacBook, though.
    MacBook   Mac OS X (10.4.7)  

  • Does Applecare cover MacBook and MacBook Pro power cords/bricks?

    I've replaced several over the years.  They seem to be the weak link in these laptops.  My Applecare is still in effect on the latest Pro.  Has anyone dealt with Applecare on this issue? Specifically, in  the area behind the small mag-safe plug a wire(s) seems to have broken connection. Thanks.

    The original adapter that came with the machine for which you bought AppleCare was covered. If you had the first one replaced under AppleCare, the subsequent ones might also be covered, but only as long as you continued to apply to AppleCare to cover them. If you just went and bought them, they're covered only by their own warranties.
    Damage of the kind you describe is caused by user abuse: disconnecting the plug by pulling on the cord (accidentally or deliberately), or bending the cord too sharply right behind the plug. If neither of those things happens, the cord won't fray and break there.

  • Macbook pro power cord frayed and not charging

    Ive just noticed I have the same power cord problem. I plugged in the cord into my macbook and noticed that the light did not turn on. Upon closer inspection I noticed the wire was frayed and was real hot. I have not moved my power adapter or have had something happen for it to be that bad. Im not sure if Im still under my 1 year warranty plan thing, but I was wondering if I took it into the apple store they would still replace it. So if anyone has been in this situation and knows the best option, besides spending the 80 bucks for a new one I would greatly appreciate it.

    Hope you feel better.
    I assume the OP bought it there and can certainly go back under the 1 year and show them another melted one as there have been enough melted ones for them to know this is a bit of a problem. He can call Applecare as well of course.
    Message was edited by: Host

  • Macbook Pro Charger cord breaking/short despite my following the care process?

    Despite my following the care process this is my 2nd 85 Watt Magsafe adapter to go bad and has a short in the cord after the adapter. I ensured I kept the cord uncluttered / not tangled up in open area / wrap accordingly (manual on how to care for magesafe adapter) when not in use. At work I keep the adapter on the desk. I have had my computer for 3 years without issue with the exception of having to purchase an $80.00 adapter cord a year ago. Now I have to purchase another within a year & half time. This isn't right.
    Can some one provide insight on how to address this (replace without having to pay for another cord).
    I bought it from best buy. I will try and locate my reciept. 

    You probably need to replace the two-prong attachment with the three-prong extension cord, which should have been included with the charging cable.  That adds length, as well as grounding the adapter, which is safer anyway.

  • Macbook pro charge cord stopped working & shuts off unexpectedly

    Hello,
    All of a sudden, my charge cord has stopped working - I'm not sure if it's my actual computer or the cord.  It does not light up at all anymore and the battery icon says "not charging" sometimes.  It also will shut off unexpectedly and when I manually turn it on I get this message "can't verify the identify of the website" and the clock gets set back....help

    Does your MBP get HOT when you are playing games, as they use quite a bit it the way computing cycles and generate a lot of heat.  I had this issue with my kids machine, try rasing the MBP up off ahy hard surface you mat have it on while playing. (I used 2 1"X1" strips of wood the increase air flow around the machine. The exhaust vents are in the back under the hinge, keep yhem clear. This simple fix seemed to work, no more problems. There also cooling trays with fans that are commecially avaiable. Are your fans spinnig up to cool the MBP? If not you might want to try a smc reset which controls the fans.
    SMC Reset: http://support.apple.com/kb/HT3964
    Hope this helps

  • Macbook pro power cord not working and its under warranty

    Whats the number or email address of who I contact please?

    Read here, & select your country:
    http://www.apple.com/support/contact/
    There is no email support.

  • Main cord to macbook pro power cord broke ......cost to replace; it broke where magnetic part connects to part with green/orange dot

    see above

    thanks....now I have to decide if i just go ahead and put out the money on an ipad air.....retired, 73, and in my old age have become a computer addict!  never thought it would happen.  thanks so much....from baton rouge, louisiana

  • My Macbook Pro cannot connect to the internet using an ethernet cord.

    My Macbook Pro cannot connect to the internet using an ethernet cord. It was working fine for weeks, then all of a sudden just stopped. What could the problem be?

    Hi bean07670,
    If you are having an issue with the Ethernet connection on your MacBook Pro, you may find the following article helpful:
    Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
    http://support.apple.com/kb/TS1317
    Regards,
    - Brenden

  • How do you connect your macbook pro to a sony bravia tv with a belkin cord????? HELP!!!!!!!!!!!!!!!

    How do you connect you macbook pro to a Sony Bravia tv with a Belkin cord!?!?!?!?!?!?!? We know how to set it up, but what setting do you put your tv on!?!?!? we have tried everything, but it wont work!!!!!!!!! HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    Well, I have connected my mbpr directly to a Sony Bravia using an hdmi cable, then set the tv to use the corresponding input port, and it works just fine. Have also connected via airplay -> appletv -> tv (with the last connection via an hdmi cable), which also works fine.

  • What hbmi cord do I need to connect my Macbook Pro retina display to a Windows desktop?

    I'm trying to connect my Windows desktop to my Macbook Pro retina dispay so i can transfer CD's. ALthough I dont know what cord to get.

    Your post is a little confusing. HDMI is for connecting video, like hooking your Mac to a TV. It sounds like you want to transfer files. If you have a wireless network, just share the folder with the music on your Windows machine and you should be able to copy it to your Mac.

  • Why does my Vizio hdtv say no signal when I connect my minidisplay port to hdmi cord between my macbook pro and tv?

    My Vizio hdtv says "No Signal" when I use my mini displayport to hdmi cord. It worked flawlessly for a month but randomly decided to no longer work.
    I am using a macbook pro from early 2011 running os x Lion 10.7.5 and a thunderbolt to hdmi cord. The cord has worked without a hitch the numerous times I've used it until recently. Now plugging it in will cause the macbook to flash blue quicker than normal and immediately go back to the normal screen. I know the macbook recognizes the TV because changing the input on the TV to the hdmi connected to the computer will cause the macbook to flash blue again, with the same result. The TV remains unresponsive. I have tried all combinations of turning on and off the TV and macbook with the cord plugged in and unpugged from either and both systems and in both hdmi inputs on the TV. I've changed the display resolution to every possible option with no result. The TV is not recognized as a display on either the Display section of System Preferences or the Sound section.
    It confounds me that the cord should work flawlessly until now, a month after buying it, for no apparent reason. I've been gentle with the cord, so the problem being a result of damage is unlikely. I had not updated my computer in any way between the successful and unsuccessful uses of the cord, but I have since updated my computer and the problem remains.
    I have searched for this problem on the Internet and have seen others with similar problems, but I have not found a solution that resolves my problem. I hope to avoid having to make any additional purchases.
    And a thousand and one thanks to any and all who help.

    Do you have gfxCardStatus installed?  Is your monitor set to "Integrated" or "Discrete".  You want it set to Discrete to drive the external HDMI display.
    Try resetting the PRAM and SMC
    <About NVRAM and PRAM>
    <Intel-based Macs: Resetting the System Management Controller (SMC)>
    Are you sure you have a good miniDisplayPort to HDMI cable?
    Do you have another HDMI display you can test against (your neighbor's HDMI capable TV).
    Do you have friend that can test the cable using their Mac and maybe their TV or a monitor that has HDMI input.

Maybe you are looking for

  • How to Create Business Partner with  fix number in t-code :BP

    Dear SIr, Normally I will set number range for auto  to create Business Partner. In case , If we would like to crea How to Create Business Partner with  fix number in t-code :BP , howe to do? Please kindly advise. THnak you and best regards, Vimol

  • How I create a label with drag and drop?

    I have the next... I want to be able to move to a label (drag and drop) of swing in my panel contained in jframe. I already identify the position of the mouse with the method mouseMoved With the method ---jButton1ActionPerformed--- that I assign to e

  • PE7 on XP to PE9 on Win7

    I have about 15,000 + images in PE7 on Windows XP computer , most with keyword tags and i've tried to move everything over to new Windows 7 workstation, but my keyword tags are not working. Here are the steps i've tried (multiple attempts) on XP > ba

  • Bridge CC is constantly asking for reinstall

    When I am trying to brows from PS 2014 in Bridge CC I am asked to reinstall Bridge CC for that version I did it twice without success

  • RDBMS adding a device

    If I want to add a new IOS router and have it authenticate using Radius (CiscoIOS/Pix6)? I will be using Action Code 220 and in V3, I will be using the VENDOR_ID_CISCO_RADIUS. Would this be the same value? Thanks Dwane