Macbook Pro/Airport/Leopard drops Net connection after shutdown or sleep

I see all kinds of postings about problems with Airport and Leopard. I am pretty sure that the connectivity problem in my case stems from Leopard alone. I just bought a new Macbook Pro with Leopard installed. I have been using MacBooks running 10.4.x with Airport Extreme for several years with no problems. I still have no connectivity problems with 10.4, which is being used right now on the same Airport network. But, every time I shut down the Mac Pro or put it to sleep, it drops the connection. Here is a very weird thing: If I use network diagnostics, I can get back online right away after I put in my password (which is never saved). If I go through system preferences, it does not recognize my password at all (which is saved). I get this message: incompatible security. What does that mean?? There is something screwy in the Leopard software regarding security and passwords. Does anyone out there have a clue what is going on? I am not a computer expert and have no idea how to change security settings. I'm not even sure what they are. I do not want to do anything that will screw up the connectivity with the Macbooks running 10.4.11.

I had the same problem on my MacBook Pro for the last month or so after "updating" to 10.4.10. Yesterday I tried Loki's fix but couldn't connect at all after that. So I did an archive/install of 10.4.9 and it works better than ever before. I get full signal and it is a lot snappier and faster. The problem is likely in the 10.4.10 update, hopefully Apple will get that fixed in 10.4.11

Similar Messages

Macbook pro (snow leopard) will not boot after software update

I helped my mom buy a Macbook Pro for herself for Christmas. Today, I connected it to her old eMac and used the migration assistant to transfer files over. It was unable to estimate migration time on the only user (after 45 minutes) so I didn't migrate the user. Then I tried to pair her macbook to her new bluetooth keyboard, but no magic happened, so I tried to use the bluetooth setup assistant, which crashed. So I ran a software update, hoping that this would fix whatever the bluetooth problem is. Despite having updated on the 23rd, there were 4 updates. None seemed applicable but I installed them anyway. Now the computer won't boot at all.
Software update said that I had to restart for the updates to take effect, so I restarted. The harddrive went whirrrrrr and the grey screen with the apple logo and the spinning circle displayed. Then the harddrive stopped going whirrrr and 10 minutes later, I started looking on the support site for what to do. I found this:
http://discussions.apple.com/thread.jspa?messageID=10564149&#10564149
Per the instructions in the last post, I fscked the drive (although -f, in accordance with the fsck help). This found no problems. The next suggestion was to boot from the OSX install disk. Only one problem-- there was a disk in the disk drive when the problem occurred and the disk eject button apparently only works while in the gui. I can't install from disk if I can't get the existing disk out of the drive.
So, any other ideas on what I can do to get this machine to boot?
Message was edited by: jenlarkin

Hi Jen:
Since it's new, you're entitled to 90 days of phone support (3 years if you buy AppleCare). It sounds to me like you may have some hardware issue(s) going on - you should not have the sorts of issues you're having with a new Mac. Apple will probably be much better and faster about getting you fixed than this board may be able to if that is the case.

Macbook pro 2011 battery dropped to 30% after 300 cycles

Hello ,
I have a Macbook pro early 2011 and I have noticed that the battery suddenly is draining too fast , after installing battery health it seems that in 2 weeks the battery dropped from 86% to 30% and there is the service battery sign
Please help !
Charge Information:
Charge Remaining (mAh):    1696
Fully Charged:    Yes
Charging:    No
Full Charge Capacity (mAh):    1696
Health Information:
Cycle Count:    304
Condition:    Service Battery
Battery Installed:    Yes
Amperage (mA):    -133
Voltage (mV):    11953

Cycles mean almost NOTHING, its short term abuse that matters.
1. did you often drain the battery very low?
2. did you often /always have your macbook on charge,......or did you often / always BOTH have your macbook on charge AND in sleep mode?
3. did you often /always play realistic heavy graphics games ON battery on your notebook?
1 or 2 and 3 are harsh on the battery chemistry and therefore its longevity
all batteries are consumables meant to replaced either in their own "due time" or early due to abuse / misuse.
Proper understanding of a battery charge cycle
A charge cycle means using all of the battery’s power, whether that is at once, or over several shorter battery discharges and recharges.
Two examples for clarification:
As a first example, where one fully charged battery is discharged down to 10%, then fully recharged, then using 10% of that full charge, this counts as 1 cycle since the total of both discharges is 100% of a full charge of use.
In the second example, where one fully charged battery is discharged down to 40%, then fully recharged, then using 40% of that full charge, this also counts as 1 cycle since the total of both discharges is 100% of a full charge of use.
While both examples are that of a single charge cycle, the first example is more aggressive against the lithium battery chemistry than is the second example. In short, collective overall gentle shallow or mid-range draining of your lithium battery is a better use condition than is the first example of deep-draining of the battery. While both are quantitatively identical as a single charging cycle, they are wholly different qualitatively on the battery chemistry, which is directly related to its ultimate longevity and health.
In short, it is the near and mid-term life of the battery as relates to its proper care (or lack thereof) that is to be looked after.
Priorities in order of decreasing importance for battery care are:
1. Avoiding deep discharges of the battery.
2. Avoiding having your battery constantly on charge or on charge and in sleep mode.
3. When playing graphics intense games, use your notebook plugged in when possible.
4. Reduction of battery cycles by plugging into power when on the go, or when accessible.
A person who has, for example, 300 charge cycles on their battery and is recharging at say 40% remaining of a 100% charge has a better battery condition state than, say, another person who has 300 charge cycles on their battery and is recharging at say 10-15% remaining on a 100% charge. DoD (depth of discharge) is vitally important on the wear and tear on your Macbook’s battery, much more so than is the counting of charge cycles. There is no set “mile” or wear from a charge cycle in specific. Frequent high depth of discharge rates (draining the battery very low) on a Lithium battery will greatly hasten the lowering of maximum battery capacity.
Understand that a charge cycle is a general parameter of use, but is not directly related to the short-term or mid-term abuse of the battery, which can rapidly hasten a shorter lifespan, regardless of what the actual cycle count on the battery indicates.
Proper considerations for near-term care of the battery is of utmost importance. Abuse of the battery is entirely avoidable, long-term eventual old age deterioration of the battery is entirely unavoidable.
Apple’s adaptive charging system mitigates much potential for accidental battery misuse or abuse; however it is still readily possible to abuse the battery and thereby affect battery health.

MacBook Pro Unibody Leopard Failed to Install after reformat drive.

Hello All,
Here is my dilemma. I had a triple boot laptop and everything was fine. I updated Fedora 10 to 11 and after I could not boot my computer. I have everything backed up. I decided to reinstall everything from scratch. I deleted all the partitions. Put the DVD and proceed to install a fresh 10.5.5, everything goes well. Formatted the drive using the GUID partition, HFS+ journaled, the install goes well but when it finishes it fails. The message on the screen says, " The Installer could not make the computer start up from the volume "Mac HD". You may need to select your disk using the Startup Disk Utility. I have reformatted this drive several times, even ran zeros on it onvernite and so far nothing. For some reason I can't install Leopard back on this drive. Any help...???.
Thanks,
Manuel

Unibody MBPs were originally released with a special build of 10.5.5 and then later with a build of 10.5.6. You should use only the original OS X Installer Discs that came with the computer.
Given your previous setup I suggest you start as follows:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APT (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options or Security button, check the button for Zero Data (one pass) and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
It's not entirely clear from your post that you've done all of the above procedure.

Macbook Pro Retina 10.8.2 Frozen after returning to sleep and attaching thunderbolt firewire adapter

Hi to all, i'm writing because probably there's a bug on the latest osx 10.8.2 so, could you check that what happens to me is equal to you too?
I've a Macbook Pro Retina from about 2 weeks and in the last 3 days i've seen 2 freeze of the system, i couldn't make anything, only force power off with the power button. After some tests i've noted and isolated the issue, so this is what happens:
- remove the thunderbolt to firewire adapter (if attached)
- wait until mac goes to sleep
- go out of sleep
- attach the adapter and...
- system frozen
how i've told the only way to restore is force the mac to power off.
I'll wait your answer and solutions (if there are)
Thank you
This is the consolle where you can see the issue:
and this is when all works fine:

I'm having this exact behaviour on my 13" Retina MacBook Pro running 10.8.2 when inserting a thunderbolt to ethernet adapter. System freezes hard, have to hold down power button to reset.

Apple Airport Express - drops wifi connections after a day or two.....??

Dear Users,
Can anyone assist me, I have 2 Apple Airport Express recievers and an Apple TV2 connected to my iMac. The Apple TV is connected via ethernet and a gigabit switch via the BT Infinity Router. The 2 Apple Airport Expresses are connected via wiresles to the BT router.
Everything works fine, music streams perfectly most of the time.
But after 24-48 hours of being dorment the Router seems to drop the wireless connections to the Apple Airport Expresses, if you reboot the router they connect again immediatley. I have adjusted the router settings to 802.1n, instead of 802.1n/b/g, which seemed to work better for a few days and the connection never dropped and now the problem has started again.
Frankly its not the end of the world, but it means I have to reboot the router everytime we want to use all zones for music, which when you have a wife that moans that 'my setup is too complicted and has to be rebooted everytime', it would be great to resolve this for once and all.....
Have a I missed something simple or do I need a new router/Airport Extreme?
Thanks in advance
Matt

The whole idea here is to test by first powering off your "extending" AirPort.
Then, take a measurement with your laptop at the location of the "extending" AirPort.....to see what quality of signal that it is receiving. Remember, it can only "extend" the quality of signal that it receives.
You would want to see a minimum SNR of 25 at the location of your "extending" AirPort Express. Higher would be better. If it is less than 25, you need to move the "extending" Express closer to the "main" router so that it will receive a better quality signal to extend.
Once you have a location with a decent SNR of 25 or higher, then power the "extending" Express back up at that location.

Why does my MacBook Pro not find USB hard drive after waking from sleep?

is this a known issue? i have to manually turn off/on the Mac's Airport to re-establish USB HD connection (or Time Machine won't find it either).

bender73 wrote:
is this a known issue? i have to manually turn off/on the Mac's Airport to re-establish USB HD connection (or Time Machine won't find it either).
I hate to have to tell you this, but backing-up that way is "iffy" and *+not supported by Apple.+* See [Using Time Machine with an Airport Extreme Air Disk|http://web.me.com/pondini/Time_Machine/Airport.html] (or use the link in *User Tips* at the top of this forum).
It sounds like you're using that disk for other things besides your backups; if so, and if you're going to continue backing-up that way, it really should be partitioned so Time Machine has it's own, exclusive space. See #Q1 in the same link.
Time Machine should find it's partition when OSX wakes up; if it doesn't, try a "full reset" of Time Machine, per #A4 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).

How do I get my macmini running Mountain Lion to see my Canon USB printer connected to my Airport Extreme? I have a macbook pro running leopard and that works fine. The versions of airport utility are different and I can't even see the printer from new 1

I am having trouble seeing my usb printer from my second gen airport extreme using the newest version of airport utility under Mountain Lion. UGH! And while I can see and network to my Canon IP5000 from my macbook pro running leopard, I can't from my new macmini running Mountain Lion. Any help would be appreciated in configuring my macmini so it can see the Canon IP5000 on the airport extreme. Don't want to "share" the printer from the laptop because that would be a cludge. Thanks ahead

I solved this one based on another post. Turned out I needed the snow leopard IP5000 driver. I had just copied over the leopard driver (I had saved my .dmg file) and installed that but it didn't work. So I downloaded the latest driver which turned out to be for snow leopard and I am guessing since it is 64bit that is why it worked and the leopard driver didn't. Anyway, I also had to hook the printer up via usb to the mac mini to get it to work locally before the O/S would see it over Bonjour via the airport extreme.

Macbook Pro Snow Leopard; WiFi keeps dropping, no IP Address

Macbook Pro Snow Leopard; WiFi keeps dropping. Issue is Macbook is not getting an IP address from the wireless routers DHCP Server. Tried all options in the forums. Reboot, changing security, PRAM reset .. nothing. Problem keeps happening. No issues on XP laptops and Nokia phones.
Even the iPhone, iPod and iPad seems to be fine. It is just the dang gam it Macbook pro and it is driving me crazy.
All fixes tried, changing wireless mode, security, PRAM ... only thing left is to rebuild the mac which i was hoping I can avoid somehow.
Any ideas to fix this would be great!
RK

Change your router channel. Sometimes this all you will have to do.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
How to diagnose and resolve Wi-Fi slow-downs

HT201365 My macbook pro was recently returned to me after having been lost. When I turned it on and connected to the internet at home, the activation lock activated. I put my password in and the macbook went to a white apple screen and now won't do anythi

My macbook pro was recently returned to me after having been lost. When I turned it on and connected to the internet at home, the activation lock activated. I put my password in and the macbook went to a white apple screen and now won't do anything else. How do I get it running again?

Take it to an Apple Store. Take proof of purchase with you.

I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?

I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?
Also, when I tried to Restore the settings, an Error Message pops up that says " The iPhone software update server could not be contacted. The requested resource was not found.
I'm trying to free up space on my phone by removing [literally] thousands of old photos which were originally synched to the phone, because I had forgotten to uncheck the photos button when I synched it ages ago.
I have also tried synching it on my 24" iMac (running OSX Snow Leopard). But again, when I try restoring the phone through itunes, it says the file is corrupted. It sggests unplugging the device, and then plugging it in again. I have done this numerous times with no success.
I'm guessing it must be because my phone (and versions of iTunes, and OSX) are all too old.
Please can anybody help.
Cheers,
Dan_nz.

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

Trying to set up my brand new MacBook Pro and it does not connect with the wifi network I have selected for this purpose. Nothing wrong with the wifi as both my iPad and iPhone are happily connected. Suggestions for connecting to the wifi network accepted

Setting up my brand new MacBook Pro and it will not connect to the wifi network. Nothing wrong with the network which is happily working for my iPhone and iPad! Suggestions accepted for making this connection.

Fixing this is a two step process:
1) System preferences > WiFi/Airport ...
... check [√] Ask to join new networks
"Known networks will be joined automatically.
If no known networks are available, you will
be asked before joining a new network."
2) Remove unwanted networks from the list of "known" networks under
System preferences > WiFi/Airport > (Advanced) > | Airport/WiFi pane ...
Close the window and save changes. If no joy, do a restart to ensure you are playing under the new rules.

Hi, I have macbook Pro, running Leopard OS X. I partitioned my hard drive a while ago to install windows and only allowed myself 10 Gig of data. Anyway, i deleted windows and want another OSX on there instead. How do i make this partition bigger please??

Hi, I have macbook Pro, running Leopard OS X. I partitioned my hard drive a while ago to install windows and only allowed myself 10 Gig of data. I deleted windows after i realised i wasnt enjoying using it at all and wasted my hard drive. I now decided that i want another OSX on there instead yet i have only allowed myself 10 gb on the partition. I have ben thru some programms but am struggling on making this partition bigger.
I only want it at 20gb but cant seem to make the partition bigger, only smaller or split it into further partition.
Is there a way to do this, i have all installation discs from original OSX so think this could help.
Any help please would be fantastic.
Thanks Chris

Hi, dragging the partition will only make smaller, not larger. In disk utility you can only split or make smaller the partitions. Yes i booted from installation disks also but still no help.
And Brody, I am willing to erase the disc completely, infact jus started doing a backup in order to do so but that failed also. And the information you gave on partition a hard drive, Although very simple and i already know how to do this, but it wont let me make the partition bigger, and i dont want to make a new partition, just enlarge the one i already have, which i dont see possible from disk utility.
Getting really frustrated now, even backing up is saying no to me. **** external being a douche.
I dont mind erasing the hard drive but surely this must be doable without deleting the secondary partition back t a single volume, and re partitioning into 2 volumes again.
Thanks again

Transferring home folder from Tiger 4.11 into a MacBook Pro w/ Leopard

I just got word that my PB Aluminum 1.67 that was to be repaired via Apple is now
going to be upgraded to a Apple MacBook Pro
First of I'm (happily) shocked by this offer, and now I begin a new realm into intel technology
MacBook Pro, and now... Leopard! Which I didn't want to install on my Aluminum PB I went only
as far as Tiger 4.11.
My inquiry is on transferring my back up home folder from the Aluminum Tiger 4.11 to the MacBook
Pro using Leopard.
Is that at all possible so I can restore my passwords, etc..into Leopard.
I also have PhotoShop 6 and Microsoft X software, would this be a problem installing or using
in the MacBook Pro?
Just concern about software compatibility with this upgrade.
appreciate feedback.. Aimee

Check with the third-party software vendor to find out if there are any compatibility issues or if you will need to upgrade. Older software may be PPC-only. They will run on an Intel Mac through the Rosetta emulator, but upgrading to a Universal Binary version would be the better course of action.
See:
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode or copying the critical contents to CD and DVD or an external hard drive will work better when moving from PowerPC to Intel Macs.
Basically the instructions you should follow are:
1. Backup your data first. This is vitally important in case you make a mistake or there's some other problem.
2. Connect a Firewire cable between your old Mac and your new Intel Mac.
3. Startup your old Mac in Target Disk Mode.
4. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
4. Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 3/12/2008
Generally, there should not be any migrating problems between the Intel versions of Tiger and Leopard other than third-party software may require upgrading for compatibility.

I have a 2011 macbook pro, buy yet when I connect my 16GB or 8GB Sandisk Extreme class 10 30mb card, it wont read it, however, it reads a 2GB class 2 card, is there anyway to fix this?

I have a 2011 macbook pro, buy yet when I connect my 16GB or 8GB Sandisk Extreme class 10 30mb card, it wont read it, however, it reads a 2GB class 2 card, is there anyway to fix this? and no, there is nothing wrong with the cards, they shoot fine, my dell inspiron 15 reads these cards fine, but yet my brand new macbook pro does not.

After many days of frustration, I try a stupid thing.... Put the SD card in the Lock Position and... Voilá!
The way I find to access the content is put the SD card in the Lock position..
Cheers

Macbook Pro/Airport/Leopard drops Net connection after shutdown or sleep

Similar Messages

Maybe you are looking for