MacBook Pro and iPhone both remotely wiped and locked not by me

Hi all!
So this is kind of a complicated situation I guess since Apple support couldn't help.
Last night while I was sleeping at around 5:30 A.M. I received 2 email confirmations from apple saying that I had successfully wiped both my iPhone and my Macbook. The devices worked fine until around 930 then the iPhone restarted to a new iOS5 welcoming with all my stuff gone. No problem though I just restored through iCloud. My MacBook on the other hand will not boot into the normal OS. It goes into a utilities mode with no accessible options other than a message saying "Enter your system lock PIN code to unlock this mac." along with a message from who unlocked it which says "Bilker!" I have no idea what this means or who could of done it as no one knows my iCloud login credentials, other than a potential hacker. Even if I try to reinstall the OS by booting and holding command+R it requests this PIN. If I try to boot from a disk drive it will do the same so I am at kind of a loss of what I should do.
Any suggestions or help would be greatly appreciated!

First, back up your HD, to save the items on your computer.
Second, visit your local Apple Store/Genius Bar. They have access to tools that should be able to fix your system problem. Bring your install disks. I believe they will ask you to clean install your HD.
Third, and almost as important, share the results on this thread. I'm certain that other users will gain knowledge from this incident.

Similar Messages

  • About a year ago we purchased a used macbook pro and can not get music to transfer from iPhones to mac

    about a year ago we purchased a used macbook pro and can not get music to transfer from iPhones to mac

    how can i get All music transferred? even non purchased

  • How do I get my photos off 1st generation itouch? I have macbook pro, ipad, iphone. Itouch syncs but does not have option to share in any capacity ie send via email, etc. Also, the computer from which photos were originally taken from has crashed.

    How do I get my photos off 1st generation itouch? I have macbook pro, ipad, iphone. Itouch syncs but does not have option to share in any capacity ie send via email, etc. Also, the computer from which photos were originally taken from has crashed.

    It has always been very basic to always maintain a backup copy of your computer.
    Did you fail to back up your pics?
    The photo sync is one way - comptuer to ipod.
    You can e-mail them to yourself (instructions in the manual), but they will not be of the original quality.

  • I have a MacBook Pro, and will not let me open a file because it says I do not have permission.  How do I fix this?

    I have a MacBook Pro and it will not let me open a file that I have used several times in the past because it says that I do not have permission to use it.  How do I fix this?

    Oops, my bad.  The repair disk permissions in Disk Utility doesn't actually fix the User home folders.  To do that boot into the recovery partition and when the recovery desktop appears select Utilities -> Terminal. Enter “resetpassword” and press return - don't worry you're not actually going to reset your password!
    Ensure that your username is selected from the “Select user account” menu, then under “Reset Home Directory Permissions and ACLs” click the “Reset” button.
    Click on the Apple menu and restart your computer.

  • Wi-Fi loosing connection every few seconds on my macbook pro and its not my router's fault (running yoseomite)

    Basically I bought my new Macbook Pro retina display in September 2014. My wifi was working perfectly well for about a month or two until Yosemite was brought out. I'm not sure if it was immediately after I downloaded Yosemite or not, but not long afterwards I noticed I was having trouble with my wifi (and not just mine but my schools as well). Every time my computer tries to join the wifi network it will work for a while (5 seconds) and it will say that I have a wifi connection but then it will just stop working and it will say I'm not connected to wifi. A few seconds later and it will then reconnect and say I have wifi. I am fairly certain this is not my wireless router ( a BT home hub) as I have other devices such as my iPhone and a computer which does not suffer these problems. After a while of it loosing connection and then gaining connection it will finally stop and the wifi icon at the top will suggest I have a wifi connection but when I hover over it, I see it says "Wi-Fi:looking for networks..." and then 2 seconds later it will say "Wi-Fi: On" and it will repeat like this for however long I am on the network. When the icon appears to suggest I have a connection I am able to load a webpage but it is slow and watching Netflix can be tiresome. I've scoured these forums for information that will solve my issue however all I have found is outdated information from 2010 or 2012 or too technical information that I can't understand. Does anyone else have this problem, has anyone else found a solution, it would be much appreciated if any one could help me solve t.

    Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
    Step 1
    Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
    Be sure to test on more than one Wi-Fi network, if at all possible. A desktop computer can be tested with a mobile hotspot, such as the hotspot created by a cell phone. If the problem only exists on one network, then the access point of that network should be the focus of your attention, not the computer.
    Step 2
    Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
    Step 3
    If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
    Step 4
    Open the Energy Saver pane in System Preferences and unlock the settings, if necessary. Select the Power Adapter  tab, if there is one. Uncheck the box marked
              Wake for Wi-Fi network access
    if it's checked.
    Step 5
    Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
    Step 6
    In the Wi-Fi settings, select
              Advanced... ▹ TCP/IP ▹ Configure IPv6: Link-local
    Click OK and then Apply.
    Step 7
    Reset the System Management Controller.
    Step 8
    Reset the PRAM.
    Step 9
    Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first. Turn Wi-Fi off and then back on. You'll be prompted for the password when you reconnect. Save it in the keychain.
    Step 10
    Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

  • Home Sharing between Macbook Pro and AppleTV not connecting, what's wrong?

    So I have one of the late 2011 Macbook Pro models and the newest AppleTV that I do a lot of Home Sharing for movies and stuff like that. This problem keeps popping up though where they can't communicate with each other and the videos either stop loading half way through, or my AppleTV can't even connect with my macbook to start watching at all. I've gone through most of the possible solutions I've seen posted before and even the troubleshooting by apple about it. I've made sure they are both on the same apple ID, the same wi-fi network, restarted my router, even re-setup my router from scratch, closed itunes on my macbook, turned my wifi on and off a couple of times (worked for a few then stopped again), made sure that everything is on the most current software, but nothing seems to be doing the trick. This has been going on for months now and I'm pretty much sick of it happening. Somebody please help me fix this so I can get on with my movies!!

    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
    If this doesn't help, contact your ISP, this is most likely a network problem.

  • I believe I have a virus on my macbook pro and do not know how to get rid of it.

    Well I was being stupid and trying to get free gems on clash of clans so i did the stupid little surveys and that is most likely where I got the virus from. Never doing that again. When ever i go onto google chrome or any browser a random page pops up about mac protector or something and when I try using ovoo, it instantly backs out and I cannot use it. so i do not know what to do and i am not sure if i am using ios 8.1.1 or 8.1.2. i have a macbook pro that i got 3 years ago

    There is no need to download anything to solve this problem. You may have installed a variant of the "VSearch" ad-injection malware.
    Malware is always changing to get around the defenses against it. These instructions are valid as of today, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
    The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
    Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination  command-C:
    /Library/LaunchDaemons
    In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
              com.something.daemon.plist
    and
               com.something.helper.plist
    Here something is a variable word, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes the word is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
    If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
    /Library/LaunchAgents
    In this folder, there may be a file named
              com.something.agent.plist
    where the word something is the same as before.
    If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
    Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
    The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
    Open this folder:
    /Library/Application Support
    If it has a subfolder named just
               something
    where something is the same word you saw before, drag that subfolder to the Trash and close the window.
    Don't delete the "Application Support" folder or anything else inside it.
    Finally, in this folder:
    /System/Library/Frameworks
    there may an item named exactly
                v.framework
    It's actually a folder, though it has a different icon than usual. This item always has the above name. Drag it to the Trash and close the window.
    Don't delete the "Frameworks" folder or anything else inside it.
    If you didn't find the files or you're not sure about the identification, post what you found.
    If in doubt, or if you have no backups, change nothing at all.
    The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates (OS X 10.10 or later)
    or
              Download updates automatically (OS X 10.9 or earlier)
    if it's not already checked.

  • Programs suddenly quitting on my Macbook Pro and Airport not working right

    I upgraded from an ibook to a Macbook pro about a month ago. Over the past month at least once a day a random program will "unexpectedly quit" on my computer. I have updated all the software on my computer and dont really run much peer to peer software. Also, after waking up from "sleep" my airport will suddenly stop working or even recognizing the my network. This is only solved by a restart. Can anyone help with this? I never had these problems with my sturdy old ibook. Between the high temp my computer reaches, the relatively short battery life, and the issue with all the software quitting I'm starting to feel like I was sold a lemon. Any positive feedback would be appreciated.
    macbook pro 15' Mac OS X (10.4.6)

    I have a 15 inch mbp and while i am using it the computer shuts down while i am working in word. This is upsetting as I am losing what I havent saved since the last save.
    This problem cropped up today. Any thoughts or suggestions. I havent added anything by way of ram or other hardware.
    Please I need your thoughts. This is my first mac.
    Thanks for the assist

  • My cd/dvd drive is inop on my 13inch macbook pro and will not show a disc or eject it

    cd/dvd drive will not work and will not display any disc in the drive. I have been unsucsessful in trouble this and the blank cd-r currently in the drive won't even eject manually even with a restart.

    This fixed my issue, which sounds just like yours:
    http://www.powermax.com/askjacob/2012/02/optical-drive-in-imac-not-accepting-cdd vd/
    Basically:
    1) Shut down
    2) Wait until iMac has completely powered off
    3) Hold down mouse button
    4) Power on iMac and continue to hold down mouse button
    5) Listen for sound of drive cycling itself (makes the sound of ejecting a disk)
    6) Let mouse button go
    7) Log in as normal
    Good luck!
    - Tom -

  • Air blowing out of my macbook pro and battery not showing when charging has an x through the gauge what's going on?

    Hey, I noticed just today after not using my macbook for a couple days that it's blowing air out of the back part of my macbook and It's col air and the fan is loud. Also, when I plug in to charge my macbook it has an x through the battery gauge. Anyone know what this could be? I just had my Macbook restored by Apple itself not but a month ago. HELP PLEASE!!!

    Try resetting the  SMC http://support.apple.com/kb/ht3964

  • I installed 10.6.8 from 10.6.6 on my Macbook Pro and now can't open Safari-think it's something to do with the Intego anti-virus software. Reverted Intego software back to default state and now computer just boots ups up slowly and can't access a thing.

    I installed 10.6.8 from 10.6.6 OS on my MacBook Pro and have not been able to open secure sites on Safari.  Think it has something to do with the Intego Anti-virus installed.  Tried restoring Intego to default status and now my Mac barely boots up and does nothing else but spin.  Ugh.  Has anyone had similar issues and if so, were you able to resolve?  How?  Thanks, 

    1: Backup your user files folders of Documents, Music, Pictures etc., to a external powered drive (not TimeMachine) and disconnect.
    2: Insert the 10.6 installer disk and reboot holding c
    3: Simply reinstall OS X without erasing the drive, it will overwrite the installed version of OS X and the root level software, but leave your Applications folder contents (expect Apple bundled programs) and user files alone. (but backup anyway in case it fails)
    4: Reboot and the Integro is gone out of your system, but there may still be something laying around in Applicaitons to delete. Use Software Update to get up to date.
    5: You don't need anti-virus on a Mac, Apple provides it already for you sight unseen.
    6: If you Software update, the bad certificate issues are pulled, thus are not a threat.

  • Hi, Can i sync both my MacBook Pro and My Mac Book with the same iCloud, iPhone, iPad and all the rest?

    Hi,
    Can i sync my database both on my Macbook Pro and my Macbook? is it possible to work on both computers and share the same iCloud, iPhone, iPad etc?
    thanks

    @Zizooka : Your question is not very clear ... please re-phrase ... and iCloud is the concept where you share your data through ONLY one account on ALL your devices ...

  • HT2515 I have a Macbook Pro and an iPhone5. At one point, I received messages in sync on both devices. Now, I get some messages on the Macbook and others only on the iPhone. What happened?

    I have a Macbook Pro and an iPhone5. At one point, I received messages in sync on both devices. Now, I get some messages on the Macbook and others only on the iPhone. What happened?

    Associate your mobile number with your Apple ID, if you haven't already done so.
    Sign out of iMessage on the Mac:
    Messages ▹ Preferences ▹ Accounts ▹ Sign out
    and on the iPhone:
    Settings ▹ Messages ▹ Send & Receive ▹ Apple ID ▹ Sign out
    Then, on the phone, tap
    Use Your Apple ID for iMessage
    Sign back into iMessage on both devices and test. If there's no change, you may have to wait for a change in network conditions.
    Credit for this solution to ASC user SmittyLove and to Glenn Fleishman of tidbits.com.

  • Recently bought MacBook Pro and I open the remote app from my iphone but unfortunately my macbook keyboard got freezes .how can any advise

    Recently bought MacBook Pro and I open the remote app from my iphone but unfortunately my macbook keyboard got freezes .how can any advise

    Post in the iPhone forum and or in the iTunes forum. This is the MBP hardware forum.

  • TS3989 I have photo stream setup on iPhoto on my macbook pro and I just got 2 iPhones for my family and only one streams photos to iCloud photo stream.  Both iPhones have the same Apple ID and have Photo Stream turned on.  Shouldn't both iPhones stream ph

    I have photo stream setup on iPhoto on my MacBook Pro and on 2 new iPhones that have the same AppleID as the MacBook Pro.  However only one iPhone will stream photos to iPhoto on the MacBook Pro.  All these devices were purchased in the last 2 weeks.  What setting is wrong?

    Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
    Photostream only syncs when the camera app is closed, ensure it is closed.
    Photostream only syncs when the battery is above 20%, try recharging the device
    Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
    If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
    Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back.

Maybe you are looking for

  • Is there any Update command in MDX query

    My situation is follows:<BR><BR><BR> Jan-2005 Brands Products Sales <BR>Bill:20001-ABC 100<BR>Bill:20001-XYZ 20<BR> Customers<BR><BR>Is there any way where i can delete the member "Bill:20001-XYZ" and add the value 20 into<BR>"Bill:20001-ABC" so that

  • WTC timeout error? TPETIME(13):0:0:TPED_MINVAL(0):QMNONE(0):0

    Hello, I'm attempting to connect to a tuxedo domain, but keep getting snagged with this exception on the tpcall method. TPETIME(13):0:0:TPED_MINVAL(0):QMNONE(0):0 The only noticable error I'm seeing in the logs is the following... <ExecuteThread: '2'

  • Where can i download the weblogic modules for apache (source/precompiled)

    I have wandered the wonderfull world of the BEA website for 2 full days now and still am not an inch closer to de download site for the weblogic module for apache. That is, i have apache and need to add the weblogic module to it. Complications are So

  • Return Reason codes/ Reversal Reason Code

    Good Morning SAP Gurus', I want to configure reason codes when handling return checks (NSF's).  I don't know which node I should or shouldn't use in this case.  I have something called Return Reason Codes and Define Reasons for Reversals.  I believe

  • Websphere 5.0 and non-jts-datasource = 2PC exception!

    Hello all We're migrating from a working weblogic 8 app to websphere 5.0, and we run into this problem. Toplink tries to enlist the NON-JTS datasource in the global transaction. In weblogic we defined our non-jts datasource as a non-transactional dat