Macbook pro and network domain
Hello ive just brought a macbook pro and im completely new to apple and have a question ive set the laptop up ok but i need to to connect to our company domain, does anyone know how?
Thanks
Wes
Does this component do what you want?
(28987)
Similar Messages
-
I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?
Hello AKCamus
To give you some ideas of what to do next, I have provided a few articles that will give some troubleshooting Wi-Fi connections and recommended Wi-Fi settings.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
My macbook pro and ipad does not recognize my printer on my wireless network, but my pc does. How can I get my apple products to see it on the network so I can print wirelessly? My printer is a Brother MFC-J270W
try disabling email scanning for incoming mail.
One of the last things that occurs is the mail server and Thunderbird sign off on "where we are up to" and Thunderbird stores this state information in the popstate.dat file in your profile (there is one in each POP mail account folder). If the anti virus, or you for that matter, end the conversation a few seconds early that hand off does not occur and the popstate is not stored. -
Problems browsing on home network on my macbook pro and Air
I own a home network and unfortunately, we are having problems browsing using Safari or Firefox on the Macbook Pro and Macbook Air. The notebooks are able to connect well and also receive emails, but its only the browsing that cannot be done.
We also have a windows based laptop which works perfectly well.
My Iphone works well too !
Can someone assist.Go into your System Preferences > Network Advanced>TC/IP and turn off IPv6
reboot and try again.
https://support.apple.com/kb/HT4669
https://support.apple.com/kb/TS3802 -
I have just acquired an iMac desktop (about 4 years old). I want to connect to my Apple airport wireless network, but cannot remember the password. How can I access the password or, if necessary, reset it. I already use a MacBook Pro and an iPad on the network and don't want to jeopardize what already works well. I am not all that computer literate.
How can I access the password or, if necessary, reset it.
Read the user manual that came w/your Airport router or you can cross-post in one of the AirPort Forums for instructions. -
Setting up my brand new MacBook Pro and it will not connect to the wifi network. Nothing wrong with the network which is happily working for my iPhone and iPad! Suggestions accepted for making this connection.
Fixing this is a two step process:
1) System preferences > WiFi/Airport ...
... check [√] Ask to join new networks
"Known networks will be joined automatically.
If no known networks are available, you will
be asked before joining a new network."
2) Remove unwanted networks from the list of "known" networks under
System preferences > WiFi/Airport > (Advanced) > | Airport/WiFi pane ...
Close the window and save changes. If no joy, do a restart to ensure you are playing under the new rules. -
I run time machine on my iMac using an external hard drive. I just bought a MacBook Pro and want to know if i can run time machine on it using my wireless network on to the iMac external hard drive
How do I set up Time Machine to a shared drive on another Mac?
-
New macbook does not "see" my network, old macbook pro and iphones do...
Yesterday I installed an upgrade to my airport extreme base station, now my macbook pro and the 2 iphones in the household see the wifi network but the other macbook does not. It does see the neighbors wifi networks and will see it when I connect via a cable to the base station by no wireless connection... help!
I am having a similar problem. I have 19 iBooks in a classroom and, suddenly, none of them can see the AirPort Express network when they log on. Instead, the iBooks try to connect to a Windows-based school network. I have designated the AEBS network as the only preferred network but the iBooks NEVER try to connect to it first. However, if you click on the AirPort icon in the menu bar, the AEBS network is clearly visible and clicking on it immediately connects you to the AEBS network.
When I originally set up the network in January, everything worked just fine. After the upgrade to AE Firmware 5.7 and various OS X 10.4.5 updates, everything has gone downhill. I had the dropped signal problem that so many have reported. I downgraded to AE Firmware 5.5.1 and followed J. Exby's procedure to upgrade the AEBS framework. That solved the dropped signal problem. But now my iBooks cannot find the AEBS network when they log in.
I have set the AirPort Network Preferences to connect Automatically or to Preferred Networks with the same result. I have also set the option to "Keep looking for recent networks" and it never finds our AEBS network. Yet, the network can be accessed manually through the AirPort icon.
BTW, I use one of the iBooks myself and it works perfectly and finds my preferred network in 2 other locations with non-AEBS networks. But it cannot see its own preferred network in school.
This is really bugging my students--and me! Any suggestions? THANKS! -
I forget to charge my MacBook Pro and it turned off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. If I close the lid it looses conection. Sometimes pulling the Battery out will fixes it untill we forget to chage it.
Mac OS X version 10.6.8I forget to charge my MacBook Pro and it turned off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. If I close the lid it looses conection. Sometimes pulling the Battery out will fixes it untill we forget to chage it.
Mac OS X version 10.6.8 -
I have a Macbook Pro, and I cannot get onto my my job's wi-fi network. Has anyone ever had a problem getting on a wi-fi network at your place of employment? I have a username and password for the network, but when I try to go through the Connection Assistant and put in my password, it says its the wrong password.
you need to contact your employers IT department.
-
MacBook Pro and my home network - FAIL
Hello...and HELP
I have a MacBook Pro whose network access has slowly deteriorated over the last few weeks so as to be completely unusable, and I'm at a loss as to the solution
I have a Netgear Router WPN824x2 and a number of Tivo's, iPhones, and windows machines successfully running off the wifi without incident. However, our MacBook Pro, which also used to automatically connect and get a relatively good signal had begun dropping connections or not connecting at all. Sometimes it wouldn't even spot the SSID for the network (or the networks of the adjoining apartments, which I used to regularly see as well). For the last couple of weeks, I have had to walk the laptop to within a couple feet of the router to get any signal at all. Again, other computers moving to the exact same spot had no issues.
For most of this time I had been running WEP security. I thought the problem may be someone poaching bandwidth or ports from my router, so I changed my security to WPA2. Again, I changed all the other devices in my house to the new password and had no problem connecting, and thought I had (briefly) solved the problem with the MacBook, too. Unfortunately that's not the case.
I'm now getting a number of problems with my connection, and have been cycling through different issues trying to troubleshoot. when I try to connect to my home network I get one of the following messages (they rotate)
1) "the network you are trying to connect to requires a WEP password" - this is inaccurate as I'm now running WPA2
2) "The network you are trying to connect to requires a WPA password" (good) but when the correct password is entered I get either "invalid password" or "network timeout"
I've deleted keychain entries, tried to connect in network diagnostics and airport utilities, and pretty much anything else I can think of, but the problems are repeating.
Can anyone help with this? Please advise!OK, this is now REALLY ******* me off. I bought a new dual-band router in hopes that the router was the issue. For about two days I was able to log into the 5 mhz band and thought I'd gotten around the problem. Now all the old problems are back, and this time it won't even detect the 5 mhz band (conveniently renamed so I could tell it from the other band). And it's STILL asking for WEP passwords on WPA security.
Am I to assume at this point that apple airport just *****? I'm ready to give up on my Mac altogether over this... -
Is there a way to access the passcode previously entered to access a wi-fi network that the MacBook Pro and iPhone automatically remembers and stores?
Not on an iPhone, but on your Mac: Keychain Access>Enter the name of the WiFi network in the search bar>Info Button>Check Box "Show Password">Enter your Admin password>If will appear.
-
Im completely new to Mac. Im swapping my windows laptop for macbook pro and looking for network storage solution which the Time Capsule seems to do. Is it possible to use this as NAS for my desktop Windows PC - windows 7
Broadly speaking I want some sort of network storage( wireless or through my existing wifi router) that I can access files for both my windows PC and Macbook and also to access files to my iPad/ iPhone. Some sort of backup and sychronisation so that I can access certain files remotely.
Buy a real NAS.. synology or QNAP are the standard... although companies like Netgear and Western Digital and Seagate make them as well.
There is no problem sharing between Mac and PC now.. you do not even need a NAS to do that.. you simply share the hard disk directly. Mac talk SMB.. everything talks SMB nowadays.. so it is easy.
ipad and iphone are not designed to use NAS.. they are designed to backup only to the cloud or itunes.. but you can load an app like file browser if you want.
http://www.stratospherix.com/products/filebrowser/
Remote access to the Apple TC is somewhere between difficult, to impossible from a PC.. Apple use BTMM and iCloud but the service is not offered to PC.
A real NAS will offer HTTPS or SFTP or several other methods.. that both Mac and PC can use.
You simply plug it into the current wireless router.. it is a network device and assessable over the network. It is not necessary to buy another router.. in fact that is a waste. -
i have a late 2011 macbook pro and i don't have the airplay icon on my menu. Everything is on the same network and i have a black mini apple Tv. it is either 2nd or 3rd generation. The airplay icon comes up in itunes it doesn't works with video just music. I want to mirror it on my apple tv. Will you please help me?
That's why, you will need to upgrade to 10.8
-
I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel? Is Parallel in fact the best way to go?
First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.
Maybe you are looking for
-
Hi, When i look at the standard delivery note print program. I found there are number of structure: VBCO3, "Communicationarea for view VBDKL, "Headerview VBDPL, "Itemv
-
Crystal report unexpected error in Web service (IIS)
We are using Crystal report in web service. We faced some problem due to crystal report unexpected error. Refer the below error message. Xception E NSF NSFZ1100 20100608 145511565 GPRAB0 : GPRZ10 [GUEC0001] [1] [AbstractService] Sho
-
Automatic backups are not working on one drive in Mt. Lion
I am having some trouble with automatic backups from my 2009 MacBook Pro to one drive in Mountain Lion: * The drive in question is an external 500 GB USB or Firewire drive. * I encrypted the drive with FileVault 2 * Manual backups work fine to this
-
In options, under the general tab, it is blank all except the ok and cancel buttons. I can't change my home page. Please help.
-
Soft Return in Numbers with iPad Virtual Keyboard?
When using my Apple wireless keyboard I am able to create a soft return/new line within a text cell by using "option + enter" keys. The "enter" key by itself moves the cursor to the next cell instead of doing a new paragraph or line within the same c