MacBook pro and SD Slot.......
I have a 2010 MacBook Pro.
Does the SD Card slot support SDHC cards?
Is there any limit to what size SDHC card I can get?
Finally, what are the read/write speeds like when using a SDHC card (if compatible)?
Thanks
USB2 has a burst rate of 480 Mbps, but the sustained transfer rate is a little less than 2/3 that. So, the max speed of the SD slot is slower, but not by a whole lot. However, the SD card media itself tends to be pretty slow unless you get the super fast cards. The fastest card out there is 32 MB/s write, 64 MB/s read (256 Mbps / 512 Mbps) -- burst rates. Sustained transfer is somewhat slower. Basically, the fastest card you can get will work pretty much at the max speed the MBP can deal with, which is slightly slower than USB2 for sustained data transfer.
Similar Messages
-
I have got a 13 inch MacBook Pro and it got stuck in a loop so I switched it off by holding the power button down and now when I switch it on the apple logo appears then I get a blank slot at the bottom of the screen then the circle appears and rotates and then it switches off again, I have tried starting it again with the system disc that came with it when it was new but it makes no difference. Is there a sequence that I can use to force it to start.
Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
Take it to whoever replaced the screen and see if they can help you.
iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked. -
How to install an SSD in a MacBook Pro and keep the original hard drive
Step by step instructions on how to install a Crucial SSD as the primary drive in a MacBook Pro and use the original hard drive as a second drive in place of the optical drive.
Apart from the time needed to back up your data and clone the original drive to the new SSD, you should be able complete this in less than an hour.Verifying
Install the SSD in the HDD slot
Install the HDD in the optical slot
Boot to the HDD and format the SSD
Boot using Command R and restore the operating system from Time machine to the SSD
Reformat the HDD and restore the data files to it. -
Can I take use the RAM from my old Macbook pro and put in in my new one?
Hi guys, wondering if I can do this to save money on buying new RAM?
I have a 13" Macbook pro and have just bought a new 15" Macbook pro
the 13" Has 8gb of RAM
the 15" has 4 gb of RAM
I want to swap them over if its possible.
This is the info I have on the 2 machines....
OLD MACBOOK 1(13-inch, Mid 2009)
SERIAL NUMBER: W8946UD366D
MacBookPro5,5
Memory Slots:
ECC: Disabled
BANK 0/DIMM0:
Size: 4 GB
Type: DDR3
Speed: 1067 MHz
Status: OK
Manufacturer: 0x859B
Part Number: 0x435435313236344243313036372E4D313646
Serial Number: 0x00000000
BANK 1/DIMM0:
Size: 4 GB
Type: DDR3
Speed: 1067 MHz
Status: OK
Manufacturer: 0x859B
Part Number: 0x435435313236344243313036372E4D313646
Serial Number: 0x00000000
NEW MACBOOK PRO 15 inch (mid 2010)
SERIAL NUMBER : W80280KUAGZ
A1286
macbook pro 15 inch mid 2010
processor 2.66ghz
intel core i7
memory 4gb 1067 mhz ddr3
intel hd graphics 288nb
serial number w80280kuagz
software osx 10.9 (13a603)
memory
4gb installed 2x2gb
your mac contains 2 memory slots each of which accepts 1067 mhz ddr3 memory module, all memory slots are in usealex94598,
the 2011 and 2012 non-Retina MacBook Pros can have a maximum of 16 GB, as can the 2.4 GHz 13-inch Mid 2010 MacBook Pro if it runs OS X 10.7.5 or later.
dreamtunnel,
your two MacBook Pros have a maximum of 8 GB. -
How do I uninstall Yosemite? It's not compatible with my older MacBook Pro and I can't connect to my printer or access Safari
How to Downgrade OS X Yosemite Back to OS X Mavericks
-
Officejet Pro 8600 - Macbook Pro and Macbook Air will not print
Products:
HP Officejet Pro 8600
Macbook Pro (Mac OS X, Version 10.7.5)
Macbook Air (OS X, Version 10.8.2)
Question:
Why did my Macs initially print fine, but now will not print at all?
Full Story:
I have a wireless network at my house that consisted of a 30mb cable internet, Netgear 900n, HP Officejet Pro 8600, 2 Dell Laptops with Windows 7, a Lenovo Laptop with Windows 7, and Dell Tower with Windows 7 - All printed just fine.
The HP Officejet 8600 was added to my network about 2 months ago.
I added a Macbook Pro and a Macbook Air about 3 weeks ago. Both Macs printed just fine for about a week. Then suddenly they stopped. I spent about 2 hours on the phone with HP Service, and they finally said it must be my router. So I called Netgear. Netgear was useless! They wanted me to agree to charges for services before they would even discuss the issue.
Due to information provided by HP's service support, and because Netgear will not support their product, I promptly purchased a new router - an Apple Airport Extreme.
The Macs recognize the printer, will print if hardwired via a USB cable, but will not print wirelessly to the Officejet Pro 8600. The PCs print fine.
The frustration that is being felt is compound by the fact that the Macs printed just fine with the Officejet Pro 8600 2 weeks ago, and now the printer just shows "idle"... even with a new router. (see image below)
Please help, I appreciate any support.
As a side note, the HP Service rep was very friendly, and definitely tried to support the HP Product, which is much more than I can say about Netgear.
Thank you,
This question was solved.
View Solution.Hi,
More likely the issue related with Multicast, which Apple devices relies on to communicate with teh device through the network.
First try unplugging the router for 30 seconds.
Plug it back to the power and wait for 2-3 minutes.
Turn the HP printer Off and back On, then check for any difference.
If the same persists, try changing your router configuration as following
Note: the settings below are not related with the HP product, I provide you the steps as a best effor and those are only based on my own knowledge. you may try modifying the router settings at your own risk:
Open the router configuration page (can be found listed as the Default Gateway by clicking the Wireless icon on the printer, then print a network configuration report.
Click the Advanced tab.
Click the Setup option from the menu, then click on WAN Setup.
Make sure to uncheck the box next to Disable IGMP Proxying and Apply the changes.
Click the LAN Setup on the same Setup menu.
Set the RIP Version as RIP-2 and Apply the changes.
Reboot your router and then check for any change.
I hope you may find that information useful, you may also use the user guide below for further information:
http://www.downloads.netgear.com/files/GDC/WNDR4500/WNDR4500_UM_07DEC2011.pdf
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
I have a MacBook Pro and an 1TB WD my passport for mac. I bought a second hard drive to act as back up and when I went to do this the original passport won't mount. It is showing in disc utility but it will not repair. I am told the mac cannot repair it and I need to back up the files and then restore the hard drive. But I can't open the hard drive to move the files onto the new one!
Help me please. I am not very technical so please answer as if I have no clue!! This hard drive has my iPhoto on it and all my pictures of my son, wedding and my current photography course so I desperate to get it back!
Any help will he appreciated!disk0s2: I/O error.
disk0s2: I/O error.
The MBP's disk is damaged and requires replacement.
Genius Bar Reservations: http://www.apple.com/retail/geniusbar/ -
I have a macbook pro, and am trying to update my software. I recently bought an iphone 5, and my software is to out of date to sync my phone with itunes. I currently am running 10.5.8 and I need to update to atleast 10.6.8. Just wondering if I need to purchase it from apple or if there is an easy/free way to update it.
you need to purchase it: http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard. It is only on a disk, not in download form.
-
I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. the same thing happens when just trying to save my pictures from iphoto to a flash drive. suggestions to complete backup please?
Sounds like you'll need to access that drive while it is not booted. You need to replace it anyway, so do that, then one way or another (ext enclusure, et), access it and copy files.
If you keep trying to boot it, you might kill it for good and not get your files, so just swap it out first. -
i have a sony vx2000 and a macbook pro and i obtained the 9 to 4 inch firewall cable. my issue is that cant get any footage from my vx2000 to my imovies. i have looked up how to do it online and they make seem like you just plug it in and go its all golden. but not for me what am i doing wrong it does seem to be recoginize that my camera is even plugged in and no way letting import of capture any of my footage to my imovies. please help
The camera must be plugged in to AC power (not batteries only). And generally, the camera should be set to Play mode, not recording mode.
-
i bought and downloaded iWork when i bought my macbook pro and i used to save my documents on words. then a few weeks ago, i downloaded a free trial of microsoft office but unregistered and deleted it a week after. now i can't save my documents on word. It used to ask me if I want to save my documents on word, now it doesn't. And the W icon keeps on appearing on my dock. Can I return my computer to an earlier date? Please help me. Thanks
No, I don't have a back-up of TIme Machine... to tell you the truth, I have this computer for a few years now and I still don't know how to work all of the apps that are here. Anything else I can do?
-
i have a MacBook Pro and just added an airport express to listen to my iTunes on my stereo. How do I get Firefox to use my AX when I use Grooveshark or Pandora?
If the purchases are all from the same account then you can share the content by authorizing each device.
If you have separate accounts then you have to be authorized to use the content purchased from another account.
MJ -
After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer. -
(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.
Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to. -
I do not know my apple administrator username and password. How do I find out what it is? I am trying to download IBM Notes and Domino onto my MacBook Pro and I cannot download the software without verifying my apple administrator username and password.
iOS is only for mobile devices, so:
Resetting or changing a password:
For Snow Leopard or earlier: http://support.apple.com/kb/HT1274
For Lion or later: http://support.apple.com/kb/HT6022
For Mavericks users:
http://www.macworld.co.uk/how-to/mac-software/how-change-admin-password-mac-3535 328/
This is also useful:
http://www.macworld.co.uk/ipad-iphone/news/?newsid=3463233&olo=email
If it's running Mac OS X 10.6.8 or earlier, insert a Mac OS X install DVD, restart with the Option key held down, click on it, and use the Reset Password utility.
If it's running Mac OS X 10.7 or newer, restart with the Command and R keys held down, open the Terminal, and use the resetpassword command:
https://discussions.apple.com/docs/DOC-4101
Maybe you are looking for
-
FCP 6.0.2 captures black (Uncompressed 10bit PAL)
Hi all, The fun and games continue... Since upgrading to OSX 10.5 and being forced up to FCP 6.0.2 (someone else's projects..), all my captures have resulted in plain black quicktimes. It records the timecode data but just sees black footage where vi
-
My problem is that I don't know how to use my Time Capsule with Ethernet Cable, as when I use wireless it is really slow.
-
Loading a text file to a buffer
Hi, I have a very simple question, I have a text file which I want to read and load it in a string buffer, but I don't want to user BufferedReader and append line by line, is it possible to load the text file into StringBuffer without any loops / app
-
Why do I have trouble playing youtube videos?
Most of the time when I attempt to watch a youtube video, it either loads very slowly, or not at all. I do not have trouble watching videos on any other site. I've got a brand new MacBook Pro running 10.7.4, 2.9 ghz, 8 gb memory. The current downloa
-
Help required in configuring multicast routing
Hi, We have two 2 servers and 200 clients. 2 servers are in one vlan, 200 clients are in another vlan. first server will send data to second server with multicast address 234.5.6.7 second server will send data to 200 clients with multicast address 23