MacBook Pro and WeatherPop menu bar issue
I noticed that my weatherpop application is not automatically starting when my macbook pro boots up even though it is listed in my auto login list. So, I double clicked on it in the applications group and all it does is reload my menu bar and won't load. I tried it over and over getting the same results. Anyone else having this issue?
Help, anyone?
Similar Messages
-
MacBook Pro and new AirPort Extreme issue
Hi All:
I just bought a new MacBook Pro and Airport. other computers and a wii in my house seem to keep the the connection, but with the MacBook Pro i need to set up the connection every time, as I have the SSID broadcast0 turned off. Has anyone seen this before?
I have attempted to reset my keychain and the MacBook Pro remembers the wireless router at work? what could I be doing wrong?Yes, just do the downgrade to 7.4.1. The support article is the typical nondescript article that neither indicates if it is a bug or not. This is quite irritating since I've been using an Airdisk for TM since Leopard was released (almost 2 years now). Originally you had to do hacks with "defaults" and touching files to get it to work. Then last year one of the firmware updates no longer required any hacks. Now they bust it.
It's busted because otherwise they wouldn't let TM pick the drive. They'd either present an error dialog stating it's not supported, or the Airdisk wouldn't even show up. Instead, the drive keeps falling off the network. That's something crashing inside the router. I wouldn't be surprised if the drive falls off the network when placed under any load. Apple's QA sure let us down. -
Macbook Pro and external monitor sleep issues.
I recently upgraded to a new 13 inch MacBook Pro to replace my previous one. With the upgrade, I'm now on the latest OS and I have a Thunderbolt instead of Mini-displayport output. I have a Dell U2410 monitor which has worked great up until now, but I now have the following behavior:
When the laptop sleeps (or puts the display to sleep) the monitor begins to turn on and off. It goes to powersave mode and immediately wakes up, realizes there's no signal, and goes back to powersave mode, etc etc etc.
When I wake the computer up from sleep, the monitor's behavior stays the same. The laptop never detects the display and begins sending a signal.
If I unplug and replug the adapter, all is well.
There seem to be two separate issues: whatever signal the computer continues to send down the display cable after sleep seems to confuse my monitor, secondly, the computer never again sends a real video signal down the line after it wakes up.
I'm on the latest 10.8.3. My adapter is the same adapter I have been using for years, an apple mini-display port to DVI adapter. Supposedly this adapter is still compatible with the Thunderbolt port.
I've seen lots of issues online about wake up issues with the latest OS. Is there a workaround for this yet or do I have to uplug my monitor anytime I sleep the computer?Hi Steve,
I have had the exact same issues after adding a WD Thunderbolt Duo external drive to a Mid 2011 iMac and then daisy chaining the Dell U2410 monitor off that.
My Mini DP to DVI cable ceased working properly - sleeps issues.
After buying one of these adapters of Ebay:
http://www.ebay.com.au/itm/3-in-1-Mini-Displayport-to-HDMI-with-audio-DVI-DP-ada pter-3in1-convertor-Macbook-/110861703462?pt=US_Audio_Cables_Adapters&hash=item1 9cfdf5926
I then tried all the different cables that came originally with the Dell U2410 with that adapter, and none of then would put the U2410 to sleep properly. The backlight would stay on, or "No Displayport Cable" would float around the Dell display with the backlighting still on. Or otherwise the Dell would try to go to sleep and then wake up again and cycle like you found.
Apples Mini DP to VGA adapter was sleep successful with the VGA cable (Analogue) but the output picture was not as sharp as DVI or Displayport, plus there was RF interference with the cable.
After lots of internet searching I have found a near perfect solution:
A HDMI to DVI cable with the HDMI end connected to the Ebay 3 in 1 adapter, which then connects to the Thunderbolt port.
Connect this to DVI-D 1 on the Dell U2410.
On the Dell in Menu - Other Settings, disable DDC/CI
Now in OSX Settings - energy Saver you will have to tick:
"Put Hard Disks to sleep where possible" and select a short time frame for "Computer Sleep"
I have found that the display would go black but the backlighting on the Dell U2410 would stay on, when the display went to sleep on the Mac as per the Energy Saver "Display Sleep" setting.
The backlighting on the Dell would only turn off when the time for 'Computer Sleep" has elapsed and the external Thunderbolt hard disk went to sleep as well.
The Dell U2410 would then wake up correctly as well when my iMac woke, with this setup.
Cheapest solution for you would be to try an Apple or Ebay HDMI to DVI adapter and then use the DVI - DVI cable that came with the Dell.
If that fails get the 3 in one Adapter and use my Mini DP/Thunderbolt to Ebay Adapter to DVI-DVI cable setup.
I'm assuming your new Macbook Pro comes with the HDMI port ?
I believe the Sleep Issues with this monitor are all related to appropriate signal on the cable, and only the HDMI to DVI solution will work correctly on Mac's connected to the Dell U2410.
Good Luck. :-) -
MacBook Pro and Time Capsule connection issue
I have an issue where all the devices in my house can connect and work with my Time Capsule, except for my MacBook Pro. Everything has worked in the past(including my MBP), but last weekend my Time Capsule died, I went to an Apple store and got a refurb unit.
After setting up the new unit, every device can attach and use it, except for my MBP. It appears to attach, but says that I don't have an internet connection. When I look at the attached clients on the Time Capsule, it shows all the devices by name, except mine is shown by MAC address.
I have the wifi settings set the same as the other computers, etc., which do work. I can take my MBP to other places that have wifi, and it works just fine. It also doesn't work if I plug it into one of the LAN connections(Ethernet) on the Time Capsule. The other computers will work on wifi or the direct connection.
After taking my computer to another place and using their wifi, mine worked when I brought it back home. This lasted for a few days, then it just stopped again this morning.
I have restarted, shutdown, etc., the Time Capsule and my MBP many, many times.
Time Capsule 512MB original unit, firmware(7.6)
MacBook Pro 17", 9 months, 10.7.2
Other devices: two iMacs, 3 iPhones, 2 iPads 2's, and an Apple TV.
Anyone else having similar issues, any suggestions?
Thanks in advance.Hi DD,
If you don't get answers here, try posting in the Time Capsule forum (http://discussions.apple.com/forum.jspa?forumID=1253) and/or the Time Machine forum (http://discussions.apple.com/forum.jspa?forumID=1342). -
Macbook Pro and D-link Wireless issues
I bought my macbook pro from my school because I obtain a computer grant. The macbook pro came with a certain programs installed for my school UNC-CH. I had never had any problems with my internet connection until my parents changed our linksys wireless router for a D-Link router. My macbook pro does not connect to the internet for some sort of reason. The air port says that I have DNS and an assigned IP address; but for some reason my web browser and my applications say that I am not connected to the internet. Whenever I connect my macbook pro to the wirelss router through a ethernet cable, everything works fine. The problme only occurs over the Wi-Fi. My brother has a Macbook Air and he does not have any internet issues. I also have a thunderbolt display that has no issues witht the wire-less network. Do you think that the problem arises because of the added programs that my school added to my computer? I know that my Universtiy is very strct when it comes to connecting to the internet. My macbook pro came with a program called NAC Agent; which I use to communicate with my school's internet connection. I have tried closing the program while I am at home and having it on; but noihing seems to work.
Any ideas?
P.S.
I curently use my thunderbolt display's Wi-Fi to power my internet connection through the Bluetooth PAN connection.Thanks for the feedback LilyLC. I too have gone through all of your steps and a host of others. Still with no luck. No problems at all with my Airport Express, but still no way to keep up a connection with my DIR-655 via WIFI N. I tried all of the steps with each firmware version too. I've given up at this point. I want the 2 months of my life back that I spent troubleshooting this mess. At least Apple could acknowledge this and say we are on it, and that it isn't only "in our heads."
/begin rant/
I think that Apple needs to do some re-evaluating of their software release schedule/quality control. At this point I would rather wait and have them get it right then put out subpar updates and fall into the downward spiral pattern of "the rest of them". My confidence has been shaken and I've been a mac fan since the beginning. I just want Apple to split off the iPod/Phone/TV etc. into its own division and to get back on track with the Mac line starting now. We need this stuff to work to make a living and this takes a higher priority in my mind than new twiddle apps on the iPhone.
I do own two iPods and an iPhone but would chuck them in a river to get Leopard working solidly with the majors like Adobe, Extensis, Epson, as well as stable networking, syncing and backups. Apple really has their hands full at this point with a large list of bugs. I really wish them well but can't say I'm in the least bit happy as a consumer at this point. For the first time in a long time I feel sheepish when answering whether or not I'd recommend a Mac, and that hurts me deeply for some reason.
/end rant/ -
Macbook Pro get grey progress bar and shuts down
Hello All,
I have a macbook pro and I faced this issue out of nowhere. After shutting down the system last time, when I started the system, I could hear the apple chime, apple logo appeared with grey progress bar below it. The bar will progress to 1/3 or so and it will disappear and after few seconds laptop will shut down. I tried few times but same things was happening again and again.
After going through few support forums, I booted by pressing D to run the Apple hardware test. It wouldn't do anything at all. Apple hardware test was stuck at pass number: 1 with elapsed time of 7 seconds. All retry were the same as the first one.
I rebooted the laptop and pressed command + R and entered in recovery mode/recovery disk. I clicked on Disk utility and select Macintosh HDD and started disk verification. I got hundreds of errors/warning, saying Missing thread recode (id = XXXXXXX) and it suggested to repair the disk. I tried to repair the disk but after similar message, pop window appeared with message that disk cant be repaired. I exited out of it and went back to recovery menu.
I selected Reinstall OS X Mountain Lion and went through steps and at the point where I have to select my HDD, there was just one option and I couldn't select it. It gave message that This HDD is locked. I can't start in safe mode, and can't reinstall OS X
I believe this is because of my hard drive might have crashed. can anyone help?
Thank you,It does sound like your having mechanical or other issues with your boot drive.
If your machine is under AppleCare or warranty you can take it to them.
If you can user service your machine, you can opt to try to see if a new drive will work and install it yourself, or have a local geek do it for you. -
I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. This happened once before and it was due to a buldging battery pressing on the track pad. I checked the battery and it appears to be fine. What can I do?
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel? Is Parallel in fact the best way to go?
First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
I have macbook pro and am on OS X Yosemite 10.10.2 . I am having lot of warning message on my browser that my computer is infected with malware/spyware and use mackeeper. How do I solve this issue . This is happening more on chrome and Safari browser
There is no need to download anything to solve this problem. You may have installed a variant of the "VSearch" ad-injection malware. Follow Apple Support's instructions to remove it.
If you have trouble following those instructions, see below.
Malware is always changing to get around the defenses against it. This procedure works as of now, as far as I know. It may not work in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
/Library/LaunchDaemons
In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
com.something.daemon.plist
and
com.something.helper.plist
Here something is a variable string of characters, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes it's a meaningless string such as "e8dec5ae7fc75c28" rather than a word. Sometimes the string is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
/Library/LaunchAgents
In this folder, there may be a file named
com.something.agent.plist
where the string something is the same as before.
If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
Open this folder:
/Library/Application Support
If it has a subfolder named just
something
where something is the same string you saw before, drag that subfolder to the Trash and close the window.
Don't delete the "Application Support" folder or anything else inside it.
Finally, in this folder:
/System/Library/Frameworks
there may an item named exactly
v.framework
It's actually a folder, though it has a different icon than usual. This item always has the above name; it doesn't vary. Drag it to the Trash and close the window.
Don't delete the "Frameworks" folder or anything else inside it.
If you didn't find the files or you're not sure about the identification, post what you found.
If in doubt, or if you have no backups, change nothing at all.
The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
I dropped my Macbook Pro and now the battery is swollen, should I bring it to the genius bar?
My Macbook Pro fell off my bed (approx. 3ft) and dented the left side of the front left corner on the battery meter. Besides the damage everything seemed okay for a little while until I kept getting a erratic curser track pad. I kept cleaning it thinking some dirty or oil may of got on it or in the edges, but long story short I found out my battery is swollen and thats the reason for the erratic curser. The drop and dent impacted the battery causing it to swell. I feel that I just need a new battery. I purchased my macbook from the apple store and still have applecare. However I've researched online a bit and saw some people posted that if you drop your macbook, Apple will void my coverage. I also read that when people have had a swollen battery and applecare, they just brought it into the Genius bar and they went to the back and brought them a new battery. I've been super nervous to go see them as I've spent the extra bucks on Applecare and did not get any use of it. If anyone has had this issue or knows about it, please let me know!!
MacBook Pro 13" 2012, Mac OS X (10.9.3)I dropped my Macbook Pro and now the battery is swollen, should I bring it to the genius bar?
Yes !
I would take it in before it gets worse and breaks something.
Genius reservation http://www.apple.com/retail/geniusbar/
on-line https://getsupport.apple.com/GetproductgroupList.action
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do -
My macbook pro and iphone4 after newest ios update has had wifi issues, very very snail pace slow
um i recently last week? updated my macbook pro and my iphone 4 to lastest ios, and ever since then my wifi has been slow,
by this i mean, when i click anything, it takes a long long time to load a page, and even my facebook (arrived via bookmarks bar) so i load the same way as before, page often loads imcomplete, or not at all, on my iphone its so bad i cant even check my email, or the weather app, but on my ipod4, it works fine, cuz i have not updated the ios on the ipod touch 4th gen
is anyone else having these issues? so far ive been able to confirm (via xbox 360) that wifi signal is fine, strong and normal..... did apple screw up my devices? and if so? please tell me how i fix this, streaming my weekly 13 episodes of tv shows is now like dead slow, with every 5-8 seconds of video watching, theres another 30-40 seconds of SPINNING circle... i am so fed up
im a creature of habit, ive not changed the way i do things, the location of my computer, nothing, everything is as it was 2 weeks ago.... some-buddy help!?I refer you to the TM expert
http://web.me.com/pondini/Time_Machine/14.html
As a extra precaution I would copy the user file folders of Music, Documents, Pictures etc to another external drive and disconnect, just in case.
Always maintain TWO backups of your data at all times, since your messing with one, you need another until your back at two again. -
I'm new to Macbook Pro, and never imagined I would have problems saving bookmarks when I switched to Mac. Any suggestions with this issue? I have Safari 6.0.4, and has Apple come up with a permanent fix?
Triple-click the line below to select it:
~/Library/Safari/Bookmarks.plist
Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open.
Does the dialog show "You can read and write" in the Sharing & Permissions section?
In the General section, is the box labeled Locked checked?
What is the Modified date?
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above. -
I own a 13-inch MacBook Pro and for the past day, my wifi on my laptop says I only have two bars of connection and is running very slow,but all of my other devices such as my iPhone and iPad are connecting perfectly to the wifi. How can I fix this? I have tried to shut my laptop off and let it rest and I have also re-started my wifi router three different times. Someone please help me with this problem so I can begin to use my laptop again as I take it to school and use it for class.
Thanks so much!FCP, and all software on OSX, has a few different "preference" files (the extension is .plist), which store all your user settings. Each time you resize a window, change a setting, anything, this file is re-written. Kinda easy to see how they would become corrupt every now and then.
-Close FCP
-Navigate to User>Library>Preferences and delete com.apple.FinalCutPro.plist
-Navigate to User>Library>Preferences>Final Cut Pro User Data and delete Final Cut Pro 5.0 Prefs
-Empty your trash
Relaunch FCP and see if that worked.
Download FCP Rescue to make this process easier in the future. When you have FCP running really smooth, open FCP Rescue and create a backup of your preference files. If it starts acting wanky, just run FCP Rescue and Restore your backup preferences. Works really slick, and it's free.
EDIT: Or use the really simple explaination that X posted as I was typing. -
I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either it says that i have a newer bootcamp version. I tried a few tricks but they didnot work. I hope to be helped
Welcome to Apple Support Communities
You can install a 64-bit Windows 7 or Vista version in your Mac. Make sure you downloaded these drivers > http://support.apple.com/kb/DL1630 Also, if you have the Snow Leopard DVD you used to upgrade your Mac or the OS X DVD that came with your Mac, you can use it to install the Boot Camp drivers -
Airport card will not turn on after security update yesterday. worked normally (for the download of the update) until then. Wifi here works fine with my Macbook Pro right now so the issue is with the card / computer / software not the provider. Did the update change something?
OS 10.6.8 imac core duo. The indicator is on the tool bar but is empty.Airport card will not turn on after security update yesterday. worked normally (for the download of the update) until then. Wifi here works fine with my Macbook Pro right now so the issue is with the card / computer / software not the provider. Did the update change something?
OS 10.6.8 imac core duo. The indicator is on the tool bar but is empty.
Maybe you are looking for
-
Invoking a SOAP reuest with a single URI
Hi all, I could generate a SOAP response successfully with BEA products. Now our reporting tool takes an XML data source in which I want to give a single line SOAP request so that our tool parses the response and generates the report accordingly from
-
Can I install a Bookmarks editor like the one in Firefox version 2 on Firefox 3.6?
Ever since I have installed Firefox 3.6, I have hated the Bookmarks Organizer/Editor. The old Firefox Version 2 one was really great, and had a toolbar with buttons/icons for "Move" "Delete" "New Folder" and so on, but the new organizer that comes wi
-
HT1976 How do you add apps to iCloud?
How do you add apps to iCloud?
-
Invalid new password (must be no more than {0} characters long)
Hi, Our EP UM data source is a SAP System where the limitation is an 8 Character password (although I understand that will increase when we upgrade). When a newly created user changes their password from the Log-on page we get a returned message of
-
When I get a text or email, the images are not coming through. I just have a huge blank spot. Is there a way to fix this? I feel like I have looked on every setting that I can find. PLease help.