MacBook Pro appears as PowerMac in system profiler

My MacBook Pro 2.16 shows as a PowerMac under the system profiler, Model Identifier.
Any thoughts? Did I migrate something important and screw my new shiney MBP? Of course, I 'd like to to show the Model that it really is...and thats a MacBook Pro.
Any guidance would be really appreciated!
Cheers,

That's very weird !
1. Try resetting Parameter RAM (hold down apple/option/p/r keys at boot and release after three 'chimes'
2. Try Booting from Install DVD1 and see what System Profiler shows
3. Worst case do an Archive re-install of OSX
4. If all fails call Apple ...

Similar Messages

  • Will my 2009 macbook pro support a higher operating system than OS 10.5

    Will my 2009 macbook pro support a higher operating system than OS 10.5.8?

    For any upgrades, you will need to purchase this Snow Leopard disk from the Apple online store:
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    After installing Snow Leopard (10.6.3) you should perform a software update and install 10,6.8.  That will permit the installation of either Lion, Mt. Lion or Mavericks, depending upon your needs and/or preferences.
    Ciao.

  • I have a MacBook Pro and downloaded new operating system Maverick

    I have a MacBook Pro with the leopard operating system. When the Maverick operating system was offered as a free download, I downloaded it but iphoto and imovie didn't download what should I do?

    Before getting Mavericks, be sure to read:
    https://discussions.apple.com/docs/DOC-6271

  • I am not sure what year my Macbook Pro is but it has   System Version:     Mac OS X 10.6.8 (10K549), will I be able to download Mountain Lion or will I need to upgrade first?

    I am not sure what year my Macbook Pro is but it has System Version: Mac OS X 10.6.8 (10K549), will I be able to download Mountain Lion or will I need to upgrade first?

    http://www.apple.com/osx/specs/
    Edit: and no, you can go directly from 10.6 to 10.8

  • Where do I go on my macbook pro to find what operating system I have

    where do I go on my macbook pro to find what operating system I have
    I know this is a dumb question, but I really don't know where to find it

    AppleMenu (top left of screen) > About This Mac
    Mine below shows 10.6.8, which is Snow Leopard.
    10.7.x is Lion
    10.8.x is Mountain Lion.

  • What version of Windows 7 should I use on my Macbook Pro to run parallel operating systems?  32 or 64 bit?

    What version of Windows 7 should I use on my Macbook Pro to run parallel operating systems?  32 or 64 bit?

    64 bit.

  • MacBook Pro that  my Airport Express WiFi profile was created crashed. Can i reset the Airport Express either to an iPad or Windows 7 computer?

    MacBook Pro that  my Airport Express WiFi profile was created crashed. Can i reset the Airport Express either to an iPad or Windows 7 computer?

    Get the Airport Utility for the your iPad from the App store. You will need to know the password for the Airport Express (not the WiFi password) to access the AE. The iPad utility will, I think, do all of the actions to control your AE.
    You can reset the AE back to factory default but with the iPad app you should not ned to.

  • HT1338 Migration assistant problems setting up new Macbook pro.... System preferences will not open and Mozilla products do not open "profile missing"???

    Used migration assistant to set up new Macbook pro from old macbook pro. Many "profile" problems.
    Will not even open "System Preferences" for user whose profile info was transferred. (Will for "Administrator")
    Cannot use Firefox or Thunderbird, profile missing.
    Help???                                            

    Launch the Console application by entering the first few letters of its name into a Spotlight search, and look under "User Diagnostic Reports" for crash logs related to the application(s). Select the most recent one and post the contents -- the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report.

  • My MacBook Pro has an error message saying" Profile Installation Failed"

    Im trying install a wifi connection to my MacBook Pro. It downloads a file called "GTWifi.mobileconfig" and takes me to this system preferences window called Profiles. When I try to install the wifi file, it says "Profile Installation Failed. Some required information in the profile is missing." Everyone elses Mac's had no difficulty installing the wifi configuration of whatever it is. PLS HELP!!!

    This happens with ALL of your iPods?  So, it's probably not a problem on the iPod side of the connection.
    If you have not recently (at least since this problem occurred), be sure to restart your Mac.  At the same time, you can also Reset your iPod
    http://support.apple.com/kb/HT1320
    A Reset just restarts the iPod (it is not a Restore).  Then try it again.
    If that does not help, select the iPod in the iTunes sidebar, under DEVICES.  Over to the right, on the Summary tab, if Enable Disk Mode is currently NOT checked, see if checking it and clicking Apply makes any difference.  This is more of a test.  If that setting makes a difference, it may provide a clue for the actual cause.

  • My MacBook Pro appears to run sluggish when connecting to a Thunderbolt Display

    Here are my specs
    Hardware Overview:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro8,2
      Processor Name:          Intel Core i7
      Processor Speed:          2.2 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      L2 Cache (per Core):          256 KB
      L3 Cache:          6 MB
      Memory:          16 GB
      Boot ROM Version:          MBP81.0047.B27
      SMC Version (system):          1.69f3
      Serial Number (system):          [REMOVED]
      Hardware UUID:          [REMOVED]
      Sudden Motion Sensor:
      State:          Enabled
    AMD Radeon HD 6750M:
      Chipset Model:          AMD Radeon HD 6750M
      Type:          GPU
      Bus:          PCIe
      PCIe Lane Width:          x8
      VRAM (Total):          1024 MB
      Vendor:          ATI (0x1002)
      Device ID:          0x6741
      Revision ID:          0x0000
      ROM Revision:          113-C0170L-573
      gMux Version:          1.9.23
      EFI Driver Version:          01.00.573
      Displays:
    Thunderbolt Display:
      Display Type:          LCD
      Resolution:          2560 x 1440
      Pixel Depth:          32-Bit Color (ARGB8888)
      Display Serial Number:          [REMOVED]
      Main Display:          Yes
      Mirror:          Off
      Online:          Yes
      Rotation:          Supported
      Connection Type:          DisplayPort
    When I play games like StarCraft 2 on my MacBook Pro (without my Thunderbolt Display connected), the game runs GREAT
    When I play games like StarCraft 2 on my MacBook Pro (with my Thunderbolt Display connected), you notice the mouse responding slower (I even lowered the graphics settings to it's lowest and still get the same results)
    When I play games like Safari on my MacBook Pro (without my Thunderbolt Display connected), the game runs GREAT
    When I play games like Safari on my MacBook Pro (with my Thunderbolt Display connected), you notice the mouse responding slower
    The above happens with any application. This even occurs after a fresh reboot. i unplugged all my periphals from my MacBook Pro and Thunderbolt Display
    I updated my OS and applications.
    I monitor Activity Monitor and notice nothing unsual about runaway processes.
    Just so everyone knows. This is a 2011 MacBook Pro.

    I have the same exact model as you, as well as an Apple Thunderbolt Display. I don't play any games, so I wouldn't notice any degradation there but I do run a lot of GPU/CPU/RAM intensive apps and have experienced no problems with the TB display connected.
    We have the same configuration, OS, everything. We may just be running different apps. I do have 16GB of RAM and a SSD so that may mean that I'm just not able to notice any slowdown at all.
    I'm not sure what your problem might be - I would suggest contacting AppleCare to see if they've documented problems such as the one you're having.
    Clinton

  • 2011 macbook pro OSX maverick, error: storage system verify or repair failed

    Hi there,
    My 2011 Macbook pro which came with Lion but now upgraded to Maverick 10.9.5 has just crashed. It will start up in recovery mode but when I've gone to the apple logo to start up from disk, it shows the disk but doesn't start up from it I just get a grey screen.
    I'ved tried to verify and repair the disk and get message: 'The partition map needs to be repaired because there's a problem with the EFI system partitions file system'
    I also get: error, storage system verify or repair failed.
    S.M.A.R.T staus is verified
    None of the key commands for start up seem to work, ie - option - shift - command P,R etc.
    I can't re-install operating system as it is an older version, ie Lion and have updated to Maverick via APP store so no way of re-installing OSX.
    Any ideas???

    I have the same issue. Not able to fix it.

  • Macbook Pro 2.6ghz i7 2013 system freeze when using Premiere/AME CC 2014

    I have a Macbook Pro i7 2.6ghz form late 2013 and I have been experiencing some serious problems with my system freezing while using Premiere Pro and whilst rendering from AME.
    I am running the latest version of CC (8.1) on OSX 10.9.5.
    GFX card: NVIDIA GeForce GT 750M 2048 MB
    RAM: 16 GB 1600 MHz DDR3
    I have CUDA enabled, I need the performance boost so rendering previews of the CPU is not much of a option for me.
    I have experienced this problem since I started running Premiere on my laptop (3 months ago). If I am doing any GPU hungry processes within Premiere or AME the system will freeze, when it freezes nothing will respond and the screen stays frozen, I have to do a manual shut down.
    I went as far as replacing the whole laptop with Apple as they put it down to a faulty GFX card, the new one has the same problem which leads me to think that the problem is with how Premiere and AME work with the new Macbook Pro's.
    These crashes happen up to three times a day if I'm doing a full day of editing and I have to make sure I don't push the system to hard to avoid it, the crashes don't tend to happen when I am editing 5D footage but they are quite frequent when editing 4k GH4 footage. I am working off multiple hard drives with valuable data which are put at risk when the system crashes. I normally work on a 6 core Mac Pro but next week I'll be pushing my laptop pretty hard with a full week of editing and I'd love to avoid these crashes.
    If more info and specs are needed to identify the problem, I'll be happy to provide them.
    Cheers, Moja.
    ps.
    My system just crashed twice today, once while writing this message, I had a project open in Premiere but I wasn't even editing, its currently 30 degrees in Melbourne, one of the hottest days of the year yet, which leads me to believe that the heat is contributing to the GFX card or CPU overloading.

    mojareeves1 wrote:
    I forgot to add that I have also updated to the latest nvidia card driver.
    My music seems to keep playing when the crash occurs which suggests the hard drive and other components are still running fine, its just the GFX card that is crashing.
    The GFX card may be a red herring if it still crashes in software mode and with the internal card.  The fact that you have music playing, however, may be a clue.  Programs that can access your audio hardware (like Soundflower) at the same time as Pr have been known to conflict and cause crashes.  Turn off any background audio processes.  Check your system audio settings, as well as Pr's audio and audio hardware settings. If you can, change the source of Pr's Desktop Audio in Preferences>Audio Hardware.  Try changing the ASIO settings.
    The next (and most painful) step would be to work your way meticulously through this document:
    Troubleshoot system errors, freezes | Mac OS 10.x | Adobe software
    The "Re-create Adobe application preferences" step often helps a lot.
    Cheers,
    Jeff

  • 17" Macbook pro appears to be eating hard drives...

    I've got a 17" macbook pro. I'm running Boot Camp and windows XP on it...
    A few months after getting it, my computer started having weird intermittent issues... the hard drive seemed to run alot, it would crash, and just other weird stuff. I reformatted the hard drive (both MAC and XP partitions) and reinstalled. This worked fine... for a while.
    About 3 months later, same issue. Started getting flaky. Then it developed a "reboot" issue... namely when it would boot, it would crash in the middle of the boot, reboot itself, and work fine. (There was a BSOD but it never stayed up long enough for me to be able to read it) I went to the store and the guy there told me most likely I had a bad hard drive... could either try reinstalling, but since I had done that, probably should swap the drive.
    I replaced the drive, installed the OSs and things ran fine. Again, about 3 months later things started getting flaky. The first thing I noticed was again, the hard drive would run alot. Then things would get slow on bootup. Finally, this past weekend it just got to the point the system was DOA... when I boot it the "System" process is taking so much time that nothing else runs in any timely fashion.
    I don't go to alot of "questionable" sites, and have tried numerous anti-spyware, virus, etc packages (norton, spybot, spyware doctor, etc...)... (both preventatively and also for diagnostics). Nothing every suspicious. I've also swapped RAM.
    The only thing I can really think of, is it might be an overheating issue... its not uncommon at times for me to leave my laptop on for a few days at a time running some jobs. Granted, the hard drive is tucked away up front, so probably not the hottest place on the computer.
    Any thoughts?
    -=Jeff

    What brand hard drive do you have ? I have heard of one model of Seagate drives giving problems. If a seagate was replaced with a Seagate, that might be it.
    How full is your hard drive--how much free space do you have? You should aim to keep 15%-20% free.
    Do you use Disk Utility to verify and repair both permissions and the disk on a regular basis? Especially before and after downloading software?
    I assume you're just using your anti spyware stuff on the Windows side--it's not necessary for OS X, and it can cause problems from what I hear although I have no first hand experience with it.
    There is a utility called S.M.A.R.T. Utility that will give you a little more information on your hard drive than just "verified".
    http://www.versiontracker.com/dyn/moreinfo/macosx/32454
    See if this gives you any insight.
    As to running your MBP for several days, I don't think that would be a problem as long as it is on a hard surface so it won't overheat. If you think your Mac may be running too hot, then run the Apple Hardware Test to be sure the thermal sensors and fans are running properly.
    Please post back if nothing helps.
    Good luck!

  • HAVE A MACBOOK PRO 2006 WITH NO OPERATING SYSTEM ON IT  WHAT OSX DO I NEED FOR A FRESH INSTALL

    I had to install new hhd and have no luck w/reinstall disc, so I believe I need retail disc does it matter what version of osx I use?

    There were numerous MacBook Pros released in 2006. http://www.everymac.com/systems/apple/macbook_pro/index-macbookpro.html
    The earliest came with OS 10.4.5 installed, but the max is OS 10.6.x.  The last came with OS 10.4.8 installed, but the max is OS 10.7.x.
    If you are able to get the original install discs from Apple, you should probably upgrade to OS 10.6.x or 10.7.x.
     Cheers, Tom

  • Can I upgrade my Macbook Pro to the newest operating systems?

    My Macbook Pro is currently running Mac OSX 10.6.8 and never had snow leopard installed. I was wondering if my system would even be able to run the newest operating system.
    Second I was wondering if it is even worth upgrading to. I have had a lot of trouble with my system freezing up and didnt know if a software update could help this problem out.

    10.6.8 is Snow Leopard.
    Depending what model your MBP is, it might not be a wise choice to bloat it with 10.7 or 10.8, especally since it won't run any PPC based software or hardware drivers your using.
    Apple Menu > About this Mac > more information should show a model number like "MacBook Pro 4,1"
    then download and install MacTracker, punch that in to find your machine and the latest OS X version you can run.
    If your machine originally came with 10.5, I serious suggest you stick with 10.6.8
    Second I was wondering if it is even worth upgrading to. I have had a lot of trouble wit my system freezing up and didnt know if a software update could help this problem out.
    Upgrading to a newer OS X version won't likely cure your problems, just create more.
    Step by Step to fix your Mac
    Most commonly used backup methods

Maybe you are looking for

  • DFS Shares Prepended by DFS SID and No Longer Accessible

    Hello, Environment: We use two dfs servers which replicate all namespaces and dfs folders between each other.  There are two namespaces: Data and Users.  First server (DC12) has referrals enabled the second server (DC07) has referrals disabled.  This

  • IWork '06 trial expired, now .pages 'cannot be opened'

    In essence, I was stupid and on my new MacBook actually created some Pages documents. I say stupid because the machine automatically opened the trial version of Pages in the trial version of iWork '06. So now that the trial has expired, all those .pa

  • PCUI: Follow-up activity

    Hi, SAP CRM 5.0, PCUI: In SAP GUI the follow-up document functionality works just fine. But in PCUI it is not possible to create a follow-up activity. Whenever I try to create a follow-up activity nothing happens and the screen greys out.   Thanks in

  • Qosmio G30 - No sound

    This may have been answered before but I've lost sound on my Q30. There's no volume control. I've re-installed the SigmaTel High Definition Audio Codec which Device Manager then reports as working correctly. All the other audio drivers seem to be ins

  • Getting Dimensions of images in a folder using Power Shell

    I have a folder with several thousand images. I am hoping to list the images with the dimensions for each image. I found this link that gets me some info, but I wasn't completely successful with it: http://www.sapien.com/forums/scriptinganswers/forum