Macbook Pro automatically logged itself off in the middle of work!

I was working on bookkeeping and out of the blue, my Macbook Pro using 10.5.8 turned black, then the log-in screen appeared! Everything I was working on disappeared! My notes were gone (didn't save because I wasn't going to need them after this) and I was connected to the State of California Board of Equalization filling out an on online use tax form (if that matters).
Bizarre and kinda scary. Stuff like that happens in the PC world. I've been a Mac user for over 20 years and this is the first time this has ever happened.
Any ideas? No, no anti virus software but haven't had any problems either.

Hi grant,
grant*starre wrote:
http://discussions.apple.com/thread.jspa?threadID=2650078&tstart=0
Good find. I was not aware that this was a more widespread issue. If someone finds a solution, I hope you/they will update us here. Thanks

Similar Messages

  • My Satellit Pro M70 powers itself off in the middle of the boot-up secuence

    My Sat Pro M70 powers itself off in the middle of the boot-up secuence
    After switching if on , it passes post test and enters grub menu (Linux + Windows) or BIOS
    without problems, but most of the time after the selected OS start to boot -up, suddenly it powers-off.
    The problem is getting bigger and bigger as i hardly can boot any of the OS
    As seen on earlier posts I cleaned up CPU vents with a spray just for sure i was not an overheatting problem.
    Anyone have an insight of whats can be happening??
    Thanks

    Sorry but i have bad news
    Finally the 30secs trick did not solve anything.
    As on threadID=15116 my laptop does not run and charge battery at the same time, resulting of total drain of battery and need to power-off to charge.
    Some times on charging batt while powered-off the batt gets disconnected and no charges anymore. You need to unplug all and start again.
    When powered-on sometimes battery charges, some times the battery led shuts off and draining start again till full batt is over.
    I've ordered a new AC adapter to try to solve the problem, but if no success my laptop will be finally dead as i estimate a full mainboard replacemente costs 510 (from sources on google, not calling oficial customer service).
    This is almost a new computer. Anything over 100$ is innaceptable.

  • My MacBook Pro just turned itself off while installing Windows 7. It has now got a black screen with a white flashing bar in the top left corner...what can I do?

    I was just installing windows 7 onto my MacBook Pro. I selected to have 200GB for Windows and the rest leave for Mac.
    I clicked install and the bar filled up as it should do. However, once the install had completed, my MacBook turned itself off. I assumed this was normal. Now, my MacBook has a black screen with a white flashing underscore in the top left corner.
    What is wrong and what should I do?

    Hold down the Option key when starting up then on the sceen that comes up select Mac OS X to boot from.
    The Win 7 install didn't go well and is hung in some way. You should use boot camp assistant to remove the win partition and start over.
    Make sure you are using a Retail version of Win 7. A Branded OEM version, like ones from Dell and HP, will NOT work to install Windows 7 on your Mac.

  • Macbook Pro randomly shutting itself off?

    Hi, my MacBook Pro keeps on randomly shutting itself down along with my charger (as in the light wont show anymore when plugged in). And when it does suddenly shut down, I can't turn my laptop back on unless I do the following: first I detach my charger from my laptop. Second I wait awhile or close my laptop and open it up again then I am able to turn it back on. The next thing I do is if I want my charger to actually work again (its not charging even though I attach it back to my laptop that is turning on), I must first unplug my charger from its outlet and re-plug it in, and that's how it will once again charge my laptop. I have no idea why this keeps on occurring, and it has occurred more often today then it ever had, so much so that I am compelled to ask help from the apple community. Please help me and tell me what should I do. Thank you.

    My new MacBook Pro is doing the same thing and I just bought it 11-22-11.  I am new to mac, after years on a PC, and I have had mixed messages about whether to use the Mac plugged in once it is fully charged, or use it for hours on the batter and wait for it to run all the way down before charging.  When I am fully charged and I am going to be at if for a long time, I find that the screen will go black like it has shut off, keyboard goes black to.  Like the person before me asked, if I unplug the power cord from the Mac, the screen comes back.  Hmmmm.  Do I have a problem with the charger on my Mac?  Thanks for helping this Newbee too!

  • My MacBook pro doesn't turn off whith the "turn off" command in the apple menu

    When I try to Restart or Turn off my MacBook Pro in the apple menu the Display turns blue undefinitely but Turn off with de Power Button.

    Sounds like you need a SMC Reset, have a Magsafe issue, perhaps a battery issue. Perhaps a power issue in your location, try another outlet, location or power line.
    See #1 here and let it charge overnight.
    Step by Step to fix your Mac
    If you don't want to deal with the local Apple Authorized Reseller, call Apple/AppleCare and since it's under warranty they will send the machine to one of their Apple Authrized Repair centers.
    You can take the machine to a local Apple Store and they will test it too, bring the Magsafe as well, it might be broken or not conecting correctly.

  • Macbook pro automatically wakes itself up from sleep on its own!

    I'm a pretty experienced user, but I can't figure out for the life of me why this is happening. I run my mbp in clamshell mode connected to an external monitor, and every night I sleep it. I've had no problems with this setup for the last two years. However, in the last few weeks, every time I sleep my mac, it will wake up by itself again after about 10 minutes of sleeping. If I try to make it sleep again after the first time it wakes up by itself, it stays asleep for the rest of the night until I wake it up again in the morning. Totally strange. I've restarted, repaired permissions, etc, but it still does it. I don't think I've installed any new software that would cause this to happen. I think I just installed 1password recently and that's it. Also, to make sure it wasn't network or bluetooth activity doing this, I disabled "wake for network actiivity" in energy saver and I disabled my bluetooth. But, it still does it. Could it be a peripheral that's doing this? I haven't added any recently. I'm trying to figure out if the console log can help me, but I don't see anything that indicated what made the mac wake from sleep by itself. Below I've pasted the log for when the time just before I slept the mac and the time after it woke itself up last night. Maybe one of you can tell what app/process is doing this. Or maybe you can direct me to another system log that might give me more info?
    May 10 22:47:39 localhost com.apple.backupd[71755]: No pre-backup thinning needed: 847.1 MB requested (including padding), 544.51 GB available
    May 10 22:47:39 localhost com.apple.backupd[71755]: Waiting for index to be ready (100)
    May 10 22:47:44 localhost com.apple.backupd[71755]: Copied 165 files (33 bytes) from volume Macintosh HD.
    May 10 22:47:47 localhost com.apple.backupd[71755]: Starting post-backup thinning
    May 10 22:47:55 localhost com.apple.backupd[71755]: Deleted backup /Volumes/TM Backups/Backups.backupdb/Macintosh/2011-05-09-223905: 544.51 GB now available
    May 10 22:47:55 localhost com.apple.backupd[71755]: Post-back up thinning complete: 1 expired backups removed
    May 10 22:47:55 localhost com.apple.backupd[71755]: Backup completed successfully.
    May 10 22:48:35 localhost WebKitPluginHost[70507]: Warning once: This application, or a library it uses, is using NSQuickDrawView, which has been deprecated. Apps should cease use of QuickDraw and move to Quartz.
    May 10 22:48:35 localhost com.apple.WebKit.PluginAgent[5203]: 2011-05-10 22:48:35.862 WebKitPluginHost[70507:903] Warning once: This application, or a library it uses, is using NSQuickDrawView, which has been deprecated. Apps should cease use of QuickDraw and move to Quartz.
    May 10 22:59:04 localhost loginwindow[26]: loginwindow SleepWakeCallback WILL sleep
    May 10 23:09:05 localhost loginwindow[26]: loginwindow SleepWakeCallback will power on, Currenttime:5/10/2011 11:09:05.024 PM - Waketime:5/10/2011 11:09:04.050 PM = Deltatime:0.974226952
    May 10 23:09:05 localhost [0x0-0x2db2db].backupd-helper[72810]: Not starting Time Machine backup after wake - less than 60 minutes since last backup completed.
    May 10 23:09:07 localhost configd[38]: PMConnection AirPort configd plug-in com.apple.powermanagement.applicationresponse.slowresponse 2758 ms
    May 10 23:09:07 localhost configd[38]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 2772 ms

    Certain settings, e.g. printer sharing, can prevent timed sleep. If it's a brand new Mac and you migrated a fair amount of data from a previous computer, Spotlight may still be indexing. There are other possibilities as well. See this kbase article:
    http://support.apple.com/kb/HT1776

  • My Macbook Pro keeps shutting itself off... Why?

    I am not sure what happened to it because nothing out of the ordinary has happened.. Just one day it started turning on and off.. and then finally it was permanently off. I took it to a battery store to get a new battery and light icon turned on as if macbook was about to turn on,  but screen was black. I looked up online and i found a place that said to take battery out and with batter out hold power button down for 5 seconds. I did this and walah, laptop turned on for me like nothing had happened. I thought that I had solved my problem, but I was wrong. Earlier today, laptop shut down again and I once again had to take battery out and hold power button down.
    Does anyone know why my MacBook is doing this? Is there something specific that I need to take it in for? It's so frustrating!

    nativenoodle32 wrote:
    Is there something specific that I need to take it in for?
    Yes.  So a diagnosis can be performed so 1) you know exactly what is wrong with it instead of throwing parts at it and trying things that only solve the issue temporarily and 2) so you can get an estimate and get it fixed.

  • My MacBook Pro keeps logging me off my account, and I checked my system preferences to see if any boxes were ticked for "log out time" or "password required" and they are not. Why does it do this?

    Any help would be greatly appreciated

    Nicksea is correct and most of the posts on this subject in these forums have missed this vital explanation.
    I have just been through a big problem similar to this but mine was shutting down after 40mins.
    The reason I said "big" was that I have had the problem when doing large downloads and then having to restart them again only to have it happen again. I had spoken to AppleCare and for more than a year the issue was not resolved.
    I was told to take my computer the local 'MacDoctors' and they said they thought it was the Hard Drive and replaced it and then charged me to transfer my data. The data transfer was mucked up (if you don't know what Mucked Up means replace the 'M' with a 'F' and you'll get it) causing more trouble.
    It didn't fix the problem but it did mean I couldn't go for a Macca's for a month (kidding - I still went to Maccas but didn't order fries).
    Anyway, finally, in desperation and much frustration I thought I would give the Apple Care guys another go and got an 'escalation' guy that really took charge of the problem. He didn't know what to do to fix it but was talking about it to one of his fellow super techosleuths and his friend asked has he looked at the 'Security and Privacy' option in the System Preferences?
    Inside that option is an 'Advance' option (OSX 10.7.5) and once opened has a tick box which asks when you want your computer to shut down. Sure enough it was ticked for 40mins - it is now unticked.
    I have mentioned this to Applecare people and the MacDoctors and NONE of them had any idea that this tick box was in that section of the system.
    Computer shutting down?..... check it out.

  • For several months my MacBook Pro screen randomly turns off, but keyboard is on. Today the computer just turned itself off. Why?

    For several months my MacBook Pro screen randomly shuts off. The keyboard is on. To fix it I use the power button to shut the computer off. Today the entire computer turned off. It took several tries to turn it back on. What is causing this?

    Are kernel panics occurring?
    http://support.apple.com/kb/ts3742
    If so, log it and post it for inspection:
    http://support.apple.com/kb/ht2546
    Ciao.

  • One agent issue: CTIOS is not prompting about a call and constantly logging itself off

    Hello all,
    One agent in the call center is experiencing the following issue:
    The coming calll will not ring into the agent's desktop application CTIOS. The softphone(CTIOS)  is not prompting about a call.  ( The coming call will ring into the phone set) .   And the agent is constantly logging itself off.  
    The phone set's configuration looks O.K...    Anything else I need to check? 
    Software Version: ICM 6 with CCM4.1
    I appreciate your help.

    If this is only one agent I recommend you just save your time and either reformat the computer or change the phone.  You can decide which one needs to be replaced by having another agent on another computer use that phone and then have your bad computer use another phone.
    david

  • New iPod Nano Turns off in the middle of any track playing - Apple Bummer

    So, I just received my iPod Nano as a replacement to an early generation of iPod Nano's that are subject to recall.  The new Nano has been updated as of 21 Jan 2012.  Songs loaded into iTunes under MAC OS X Lion, iPod Nano synched with my computer, and I'm ready to go.
    What - not so fast!  Guess what?  The Nano turns itself off in the middle of any track you play.  I turned the shake and shuffle mode off to make sure that is not it.  And it is fully charged.  I even went through the reset procedures.
    So its less than 24 hours new/old so I go for Apple support.  My original iTunes etc accounts are associated with my house in America.  But I live in the UK right now.  So drill through Apple support and guess what?  Well, I live in London so no support is available.  And the Apple web site as usual does not provide much help in making calls.
    Apple's web site says there is no coverage on this as it is out of warranty?  24 hours new?  No warranty.  It says it comes with a one year warranty. And Apple UPS'd it to me yesterday.
    So question 1 is:  Does anybody know what the problem is and how to fix it?  I hope it isn't operator head space but who knows, maybe it is.
    And question 2:  Does anybody have a good 800 number for me to call in the USA?
    Many thanks.

    Livin Doll wrote:
    I have the same problem and wondered if it was loosey goosey headphones which were just cheap 10 dollars buds.  So are you saying I should get new ear phones that fit tighter?
    That would be my guess....Here is what Apple has to say about the problem. 
       http://support.apple.com/kb/ts3700
    My guess is that it is a compatibility problem with older or aftermarket ear buds.  My daughter has a 6th generation Nano and does not have this problem but keep in mind she is using the ear buds that came with the 6th Generation Nano.  With the replacement program they are not sending new ear buds.  I just did a test with my daughters 6th Generation Nano using an old set of aftermarket ear buds I had in my desk and I was able to duplicate your issue.  I then used the ear buds from my Iphone 4s and did not have an issue with the Nano going to sleep and the music turning off.

  • Software gets stuck for days in the middle of work. Force quit doesn't solve the problem

    Final cut pro gets stuck for days in the middle of work. Force quit doesn't solve the problem. It happens every once in a while.

    avoid double posts! read my reply in your other thread .............

  • I forget to charge my MacBook Pro and it turns off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. Sometimes pulling the Battery out fixes it

    I forget to charge my MacBook Pro and it turned off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. If I close the lid it looses conection. Sometimes pulling the Battery out will fixes it untill we forget to chage it.
    Mac OS X version 10.6.8

    I forget to charge my MacBook Pro and it turned off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. If I close the lid it looses conection. Sometimes pulling the Battery out will fixes it untill we forget to chage it.
    Mac OS X version 10.6.8

  • I just got a new macbook pro. How do I get the 900  songs that I took off of cds into iTunes on my computer from my iPhone. I had no problems syncing the music I had purchased from iTunes. I have tried to sync it using iTunes match, this did not work.

    I just got a new macbook pro. How do I get the 900+  songs that I took off of cds into iTunes on my computer from my iPhone. I had no problems syncing the music I had purchased from iTunes. I have tried to sync it using iTunes match, this did not work. I would like to have access to my full library without going into the user profile of my old computer, which is on my new computers hard drive. I would like to eventually delete the old profile so that I have more space on my hard drive.

    http://support.apple.com/kb/HT4527?viewlocale=en_US&locale=en_US

  • My macbook pro has been shutting off on its own. The power cord "shuts off" (does not work) simultaneously. Does anyone know what is wrong? or what could be the problem?

    My macbook pro has been shutting off on its own. The power cord "shuts off" (does not work) simultaneously. Does anyone know what is wrong? or what could be the problem?
    When my mac finally turns on the date/time is reset a windows pops up saying, "Your computer's clock is set to a date before January 1, 2008. This may cause some applications to behave erractically."

    Resetting your Mac's PRAM and NVRAM
    If you have Apple Care you should give them a call.

Maybe you are looking for

  • No Clue Where This Is Suppose To Go. Camera, iPhoto, USB. Have Fun.

    I got a new digital camera a few months ago and my MacBook Pro would pick up the camera just fine using iPhoto and I could upload the pictures on to my computer no problem. Now, not the case. Now when I hook up the camera to my computer with the USB

  • Why is Compressor way slower on 1 Mac Pro

    This is about Compressor 3.5.3 but it's not really about the version. I have two identical MacPros 2,1 models both running OSX 10.6.8 and Final Cut 7.0.3 and Compressor 3.5.3. The only difference in the machine is one has 20 gigs of ram and the other

  • SQL Tunning

    I am having one batch job in which query fatching data from various tables and inserting in one table. It's taking 3-4 hours. On generating explain plan i come to know that query taking more time due to one outer join between one view(say V1) and lar

  • How to use PROCESS_HU_INBOUND_DLVRY to pack HU to another HU

    Hi Experts! I was able to use PROCESS_HU_INBOUND_DLVRY to pack a material to an HU. I am now trying to pack the HU created earlier to another HU. Anybody who has tried it? What parameters should I pass to the FM? Am I passing the correct ones? i_save

  • Marker allignment in XY Graph

    I am Using Labview 8.6. I am plotting XY Graph In which Y Axis = Time and X Axis = Value. When I am Plotting data for 24 Hour means my main Division = 12 = 120 min / Div and Sub Division = 12 = 10min/Div. But When I am plotting the graph i missout th