Macbook pro battery not working
My macbook charger was working as normal today. However I was using it and the charger got rather hot. Worried about the heat, i separated the extension and the charger while charging to let it cool down. After awhile, I tried to charge my macbook again but now, the green led light wont light up and it can't work.. Anyway to get it back to work again? Thanks
Is it just a temporary malfunction or is it spoilt for good? I'm still under applecare, any chance of a replacement?
Contact AppleCare as soon as possible for any hardware related issues.
AppleCare:1-800-275-2273
Best.
Similar Messages
-
My New Macbook pro i7, during update, black out, when restart, battery not working. connect with AC adapter, Mac auto starting up, and battery not charge, disconnect the AC adapter, Mac cut off.
This just new one, and we do not have store in our country. I bought this from Austrilia store in Brisbane. Please assis me how to reset this matter, as if I need sent back to store may need spend lots of money on the air tikets.Hi Meck PNG,
although it seems to be a firmware or software problem (just after you updated), I think it could be a problem with the charger. It could be the connector, did you clean the connector and the Magsafe Power Port (compressed air/ soft brush). If that doesn't solve the problem, visit the apple store, you still are having guarantee (I suppose). -
The sound on my macbook pro is not working
The sound on my macbook pro is not working. When I increase the sound, the icon appears as if everything is working, but no sound comes from the speakers. Earphones don't work either. I have tried a PRAM reset but at times, this doesn't even work. It's really frustrating having to restart my computer every time I want the sound to work, and even when I do that, theres a 50 50 chance of it working again. It generally happens after my laptop goes to sleep and I wake it up. Has anyone else had this problem and fixed it or even know what caused it?
There are a lot of discussions around the earphone jack but I have checked that. I've tried a PRAM reset which hasn't worked, and my sound output is set to Internal speakers.
HELP!!Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
Highlight Internal Speakers / Headphones
Make sure Mute is not enabled.
2. Remove the headphone.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
3. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
4. Applications > Utilities > Audio MIDI Setup
Audio Devices window
Side Bar
Click the Built-in Output.
Under Mute any of the boxes checked? If so, uncheck it. -
The "A" key on my macbook pro is not working Can I fix it myself?
The "A" key on my macbook pro will not work. How can I fix it?
-----Earnie---------Don't use any cleaning spray. Wipe with a moist but not wet microfiber cloth.
1. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own"
2.Reset PRAM. http://support.apple.com/kb/PH4405 -
one of the key on my macbook pro is not working properly, can it be fixed by a cleaning spray or something. there is lot of dust in where I live and thought that might be the culprit. thanks Jason
Don't use any cleaning spray. Wipe with a moist but not wet microfiber cloth.
1. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own"
2.Reset PRAM. http://support.apple.com/kb/PH4405 -
It seems that the sound on my macbook pro does not work when watching videos such as those on youtube. Please help.
Here is YouTube's help page if you have no sound on YouTube videos:
http://support.google.com/youtube/bin/answer.py?hl=en&answer=58132
Try re-installing Flash player. I'm assuming at this stage that all your other audio works fine, e.g. CDs, DVDs, system sounds, etc... -
Output volume on my MacBook Pro is not working
My output volume on my MacBook Pro is not working. When I go to "Settings", then "Sounds", then "Output", I can not slide the volume bar at all, or change it in the menu bar?
See if a PRAM reset will solve the problem;
http://support.apple.com/kb/HT1895
Ciao. -
Please can somone help my in built cameral on my MacBook Pro is not working, the green light does not show again and the camera is not working . what can i do to active it back.
SemakoYuu can try to reactivate your iSight camera by opening up iMessage.. navigate to Preferences/Audio Video,and then click on Camera. IT shoudl be grayed-out if you only have one camera hooked up to your machine. If you have an external camera, then disconnect it from your machine.
-
My charger for my MacBook Pro is not working
The charger cord for my MacBook Pro is not working. This happened before but I do not remember what the tech guy had me do. It was a simple fix....
If the SMC reset does not work check for contamination or stuck pins:
Troubleshooting MagSafe adapters
http://support.apple.com/kb/TS1713 -
my macbook pro is not working properly , when is turned on after then show apple logo and continue show this or nothing
Gray, Blue or White screen at boot, w/spinner/progress bar
-
Macbook pro is not working, only mouse!
How can help me my macbook pro is not working properly!
I can only use the mouse. What is going on and can tell some one what i can do!
Thank you alreadyHi executive1961,
Welcome to the Support Communities!
The articles below may be able to help you with this issue.
Click on the link to see more details and screenshots.
Portables and Magic Trackpad: Jumpy or erratic trackpad operation
http://support.apple.com/kb/TS1449
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Cheers,
- Judy -
Macbook pro is not working with Canon pixma iP1500 but has previously. Printer works with an old PC but macbook shows "printer is offline". Any clues?
Hello Betty7,
Please let me take a moment to say "Welcome" to the HP Forums.
I hope you enjoy your experience!
I see that you are having an issue with getting the printer reinstalled.
I suggest that we start off by running the HP Print and Scan Doctor. If the Doctor fails, please let me know where it fails as well as any error codes it may generate.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
My MacBook Pro keyboard not working correctly after Win7 bootcamp installation.
Installation went well but when I boot either with OSx or Win it always keeps Windows keyboard.
How can I have Mac keyboard in OS boot and Win keyboard in Win boot?Hi - I have the exact same model as your MacBook and had a few questions as mine is acting up. I upgraded the ram to 8gb (2x 4GB ram) and ever since then my computer has not been running as smoothly and the start up time is horrendous. Have you encountered this problem? And if so how did you fix? What would you advise me do?
I was thinking of reverting back to the original factory 4GB then rebooting the entire computer. Any suggestions?
Thanks in advance!
Allen -
Macbook pro charger not working sometimes
Sometimes my macbook pro would not work.. but then other times it would work.. I don't know what's going on and what to do to fix it. My charger also started to be like this today.. on my 1 year anniversary with this macbook -_- Any solutions to?
Do a SMC Reset and follow the Magsafe links here
Cheat sheet to help diagnose and fix your Mac
Backup your data!
Most commonly used backup methods explained -
The sound on my Macbook Pro does not work.
The sound on my Macbook Pro does not work. When we press the volume buttons, the sound icon pops up, but the bar is full with a small "Does not work" circle below it, and nothing happens when I hit volume up or done. I went into system preferences, but there aren't any options there that I can see to change it.
"Unfortunately, it doesn't provide any help for a MacBook Pro, other than indicating to call Apple Support" (sic).
Au contraire. TS1574's title and affected products are thusly:
"Troubleshooting issues with no audio from built-in speakers on Macs
Products Affected Mac mini, MacBook, MacBook Pro, iMac"
As a result, the instructions of the article are relevant. To be sure, follow those steps, the last of which is to contact Apple.
So, by way of reminder, here are the steps to troubleshoot the audio on your MacBook Pro. There is no red light, so the port is likely fine. Headphones work, so clearly your sound card is fine.
1. Ensure an incorrect version of OS X is not installed. If one is, then reinstall or erase/install after backing up your data.
2. Remove any external audio devices from USB, firewire, etc.
3. Open Sys Prefs > Sound > Output
If Internal Speakers is listed, select it and test again.
If Digital Out is listed, confirm again that all external audio devices and cables have been removed.
If mute is selected, unselect it.
If the volume slider is low, raise the volume.
If the above simply doesn't fix it, the issue may be a corrupted plist. Apple Support might be able to help troubleshoot the issue further, per the last step of TS1574.
I hope it gets resolved for you. Good luck.
Maybe you are looking for
-
My Firfox 3.5.7 was running like a bandit. I ,upgraded up to 3.6.3 , and it has brought my system to its knees. Please help me get back to a very happy Firefox user == After I download Firefox 3.6.3 == == User Agent == Mozilla/4.0 (compatible; MSIE 8
-
Can't scan from Solution Center, using an HP Photosmart C4480 all in one
I bought a C4480 from a friend, did not come with the software CD. I downloaded the full-feature software package from the HP site. It prints from solution center but when I press the scan button in solution center nothing happens. I tried uninstalli
-
Error while loading data into PSA from data source
Hi Experts , I am loading purchase order history data from standerd datasource 0SRM_TD_CF into PSA using infopackage.However,whenevr I run infopackage,the call monitor shows the status as yellow.I monitored the process for half an hour but it never e
-
I can't remove a rented movie from my iphone
The movie has expired. I have synced the phone a couple of times and it is still on there. I have held down the sleep and home key at the same time until the apple appears. I have uncheck the option to manually manage music and videos. I was hoping t
-
I am getting my iphone inbox bombarded so would like it to not receive emails when connected to my computer. My old blackberry had an app that took care of this which worked really well. Am wondering if I can do the same with my iphone4.