Macbook Pro battery stopped working after water spill.

Hello,
I own a Macbook Pro 13 inch mid 2010 that suffered water damage, after that it stopped functioning so I unplugged and plugged again the battery, the computer than turned on and now it's working well. The only issue I'm having is that now it only works when connected to a power source, there is a message telling that my battery has to be replaced (Condition: Replace now). My question is: If I replace the battery would the problem be solved or it may be a problem in my logic board due to the liquid spill? Can anyone help me?
Battery Information:
  Model Information:
  Serial Number: 9G01804RUD3MA
  Manufacturer: DP
  Device Name: bq20z451
  Pack Lot Code: 0
  PCB Lot Code: 0
  Firmware Version: 201
  Hardware Revision: 2
  Cell Revision: 158
  Charge Information:
  Charge Remaining (mAh): 0
  Fully Charged: No
  Charging: No
  Full Charge Capacity (mAh): 0
  Health Information:
  Cycle Count: 231
  Condition: Replace Now
  Battery Installed: Yes
  Amperage (mA): 0
  Voltage (mV): 4064
System Power Settings:
  AC Power:
  System Sleep Timer (Minutes): 10
  Disk Sleep Timer (Minutes): 0
  Display Sleep Timer (Minutes): 10
  Wake on AC Change: No
  Wake on Clamshell Open: Yes
  Wake on LAN: No
  Current Power Source: Yes
  Display Sleep Uses Dim: Yes
  PrioritizeNetworkReachabilityOverSleep: 0
  Battery Power:
  System Sleep Timer (Minutes): 10
  Disk Sleep Timer (Minutes): 10
  Display Sleep Timer (Minutes): 2
  Wake on AC Change: No
  Wake on Clamshell Open: Yes
  Display Sleep Uses Dim: Yes
  Reduce Brightness: Yes
Hardware Configuration:
  UPS Installed: No
AC Charger Information:
  Connected: Yes
  ID: 0x0100
  Wattage (W): 60
  Revision: 0x0000
  Family: 0x0085
  Serial Number: 0x00a1c4ce
  Charging: No

You have "killed" your Macbook.
If you let it dry out, it MAY start working again, but if it does, this will inevitably be temporary as corosion sets in and does futher (and almost certainly terminal) damage.
The only benefit of letting it dry is that IF it works again, you will be able to save what is on the HDD.  Only important if you don't have a backup.......you DO have a backup don't you???
Irrelevant whether you have AppleCare or not - water damage isn't covered.  And the cost of repairs is likely to exceed the value of your MBP.  It is worth taking it in for a free evaluation of the cost of a repair.
Your best option may be to sell it for spares and invest in a new computer - which will be kept a long way from any drinks or other sources of liquid damage! 

Similar Messages

  • SD reader on macbook pro retina stopped working after mountain lion upgrade

    I tried to use the SD reader on my new MacBook Pro Retina tonight and I can insert the SD card and the mac does not see it. It worked prior to my upgrading to mountain lion. Any ideas?

    I also have a Mac Pro Retina and have the exact same problem after upgrading.  I will say that despite the SD card not showing up on my desktop or in the finder window, I am able to import to Lightroom 4 with no problems and I get an error message when i withdraw it, asking me to "EJECT IT PROPERLY".  APPLE! Please help us.

  • What could cause my MacBook Pro to stop working completely?

    What could've caused my MacBook Pro to stop working completely?

    Who knows.  Dead battery for example.  You provided no details.  Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.
    Which model MBP do you have?  Care to share which OS you are using?

  • I was using Safari , 5 tabs open, when my macbook pro just stopped working .What can i do ??

    I was using Safari , 5 tabs open, when my macbook pro just stopped working .What can i do ??

    Press the Power button for about 10 seconds to shutdown the computer. Wait a couple of minutes then restart. If it restarts OK, then immediately repair the hard drive:
    Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

  • Iphoto on my macbook pro has stopped working. It comes up with a message saying that the library is either being used by another user or it is unreadable. Any ideas why I should be receiving this message?

    MacBook Pro 2009
    Model Identifier: MacBookPro5,1
    Processor  2.4 GHz Intel Core 2 Duo
    Memory  4 GB 1067 MHz DDR3
    Software  OS X 10.8.5 (12F45)
    Iphoto '11
    Iphoto on my macbook pro has stopped working. It comes up with a message saying that the library is either being used by another user or it is unreadable. Any ideas why I should be receiving this message?
    "Your photo library is either in use by another application or has become unreadable"
    Offered solution doesn't work:
    Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup.
    I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
    I can't download photographs from my iphone or my digital camera.
    Any ideas on how I can solve this problem?
    There is a possibility that when I went to update applications that I started to install Mavericks which I then interrupted and cancelled. I am not definite that this caused this problem but it was at about the same time as when this problem started.
    Many thanks,
    Ed

    I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
    You can't "copy" your photos to the "library manager", there is just no way to any such thing.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • My Macbook pro 17" stopped working

    my Macbook pro 17" stopped working I was surprised that Apple told me they no longer have support the 17" Macbook pro

    That may be discontinued. I can't find a reference anywhere saying if it's still supported or not. The best I can offer is this site where you put in the serial number. It provides all the details on the machine, including whether it's still supported or not. What's wrong with it?
    http://www.appleserialnumberinfo.com/Desktop/index.php

  • Macbook pro speakers stopped working, earbuds fine

    My macbook pro speakers stopped working, but the earbuds work fine.  Tried restart and preferences.  Volume icon is grayed out, except when earbuds are plugged in.  What am I missing?

    Look in the audio output port.  If there is a red light, the internal switch is stuck.  Insert the earphone jack a few times.  Blow into the port as hard as you can.  Use a toothpick or something similar and jiggle it inside the port.  If no success, bring the MBP to the Apple store genius bar.
    Ciao.
    If there is no red light, try a PRAM reset:
    http://support.apple.com/kb/ht1379

  • Elements 11 on macbook pro has stopped working and i can't re-install as its no longer available?

    Elements 11 on macbook pro has stopped working and i can't re-install as its no longer available?

    Further info:
    Running on a macbook pro.
    Purchased through the apple app store.
    Worked fine prior to mavricks update.
    I have read where others have had this issue, the general response has been that they have had no support from adobe in resolving the problem. One guy said he managed to get issued a new download of the softwear that works fine with mavricks.
    so there is a fix avalible but for some reason its not been a general update for all customers with premier elements 11?

  • I just had 2 MacBook pro's stop working completely.  No previous issues.  Won't even turn on when plugged in.

    I just had 2 MacBook pro's stop working completely.  No previous issues.  Won't even turn on when plugged in.  Any ideas?

    See if a SMC reset will breath life into them:
    https://support.apple.com/en-us/HT201295
    If not, make an appointment at an Apple store genius bar for a FREE evaluation. Warranty status is irrelevant.
    Ciao.

  • My macbook pro wifi stop working suddenly, and know appears a X on the wifi icon, what may have happened?

    Hello,
    My macbook pro wifi stop working suddenly, and know appears a X on the wifi icon, what may have happened?
    Its seems to be the harware.

    Hello raphaelitajuba,
    The article linked below provides information regarding this indicator and steps that can help restore functionality to your MacBook Pro's Wi-Fi.
    AirPort has detected a problem with the driver or a necessary sub-system component, apply the latest manual AirPort software update or reinstall Mac OS X. If reinstalling Mac OS X does not correct the problem, take your computer to an authorized Apple service center.
    The AirPort status menu (AirPort Menu Extra) FAQ
    http://support.apple.com/kb/HT3821
    Cheers,
    Allen

  • HDMI port  on Macbook Pro suddenly stopped working. How much is it to fix?

    HDMI port on Macbook pro suddenly stopped working. Is it expensive to fix?

    No one here can tell you what the prices are to repair things. We are just users such as yourself.
    What makes you think your HDMI port is dead?
    You can take it to a Genius Bar for a FREE diagnosis, make an appointment first.
    http://www.apple.com/retail/geniusbar
    Also check system preferences/Displays make sure that you have all the correct settings.
    Check that the cable you are using is good.
    Make sure the display you are connecting to is set correctly.
    Check here:
    http://support.apple.com/kb/ht1573
    Try resettind SMC:
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    .   RESET PRAM:
    Shut down your Mac.
    Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on your Mac.
    Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears. Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
    Release the keys.

  • I have a MacBook pro that stopped working - mother board issue?

    I have a MacBook pro that stopped working. Was told the mother board is bad. However, it still turns on and makes the normal start-up noises, DVD works and ejects, etc. - only the screen is out. Does this sound like a mother board issue?

    It is a 15" MacBook Pro purchased new in October 2007. It has a 2.2 GHz Intel Core 2 Due processor with 4MB shared level 2 cache, 2GB SDRAM, 120GB hard drive, and a NVIDIA GeForce 8600M GT with 128MB of GDDR3 SDRAM.
    I read in another thread that there was a problem wiht NVIDIA video cards. Could this be the case with this computer? In the thread, the person indicated that NVIDIA was fixing these issues under warranty.
    I was told by the Mac repair tech (not an Apple store) that the new motherboard would by $700 and not under warranty.

  • Messages on my MacBook Pro is not working after factory reset, how can I enable it?

    I just recently (yesterday) got my MacBook Pro Mid-2012 restored after having a few issues with it. So it is totally "clean."
    Today I tried to open Messages which worked previously, but it wouldn't let me send a message to anyone (who I could message before the restore) and if I was able to send a message it would show an "Message Can't Be Sent" symbol next to it. I went to Messages > Preferences > Accounts > and saw that my account was enabled but my email used is in a grey font and it will not let me add my iPhone number.
    I have signed in and out, deactivated and reactivated the account and I still cannot message anybody.
    Please help guide me into fixing this, I have looked at other boards and it doesn't really help me with my predicament. How can I send a message?
    Also in the Messages menu, "My Status" is grey and I can't click anything and as well with the "Log In" option. If this can help developing an idea of what might be wrong.

    It won't send it to other emails, but it will for phone numbers. Not sure why, but if you can help with sending to other iMessage emails I would appriciate it :-)

  • Macbook pro doesn't work after EFI update.

    My new macbook pro doesn't work. I bought it yesterday and after I've installed EFI update (it installed without any errors) my mac
    "starts" with blank screen, no chime sound, with fans on (I guess - it's full speed). I've already tried those tricks with command+option+p+r and it neither work nor bring my mac to "life". Any ideas what this issue could be?

    I've got the same problem but with QT player (not PRO version)
    I've installed the 7.1.2 update for quicktime and the audio and videos files on the net doesn't start I've got a "?" then I go to the quicktime prefs and I see that the entire QT plugins disapear
    Besides the audio files and the video files on my HD work
    so ,is someone can help me for finding the whole QT plugins ?
    If it was impossible ,I suggest you to make a 7.0.4 reinstaller for 7.1.2 for Quicktime

  • MacBook pro charger stopped working

    I have a lightly used n
    MacBook pro 13 inch that stopped charging today. The battery health yesterday was at 95%. The green light on the plug end of the charger is not on. Could ths 80 dollar charge already have quit working? 

    Thanks. I was afraid of that. I tried several plugs.  It seems like everything we own from apple starts breaking down just after AppleCare ends. Our apple store is really slow in northern virginia. Had an appointment this Afternoon on a iphone5 that won't charge anymore and it still took more than an hour. Get home only to find my Mac charger stopped working today one month after the warranty expired.

Maybe you are looking for