Macbook Pro beeping when waking from sleep

I have just upgraded from Lion to Moutain Lion. Before upgrading I did all the usual disk check and stuff. But currently when my computer wakes up from sleep there is a loud beeping and black screen, I have to force shut down to use the notebook. This have happen twice. Once yesterday morning and today evening. I installed Moutain Lion on 2 Aug.
- Yesterday Morning
Went out left the computer on to download stuff, my notebook is always set to sleep after 1hr after I came back turn on the computer there is loud beeping had to force shut down.
Search the internet found it could be a corrupt sleep image file or ram problem. I did a memory test no problems. Therefore I accepted that it could be a once off corrupted sleep image file as I was not at home when the computer went to sleep.
After I rebooted there is this message that the computer recovered from a system problem.
- Today Evening
Went out decided to use Deep Sleep a dashboard widget for hibernation after I came back home the computer was running and there is the lound beeping. The computer was hot so it have turn on for sometime.
There is no message that the computer recovered from a system problem this time.
But there is this existing issue even with Lion. The computer will sometimes wakeup from its sleep. I have tried clicking sleep from the menu bar and the dashboard widget both have the same problem. I tried tweaking the sleep setting after searching for this issue online. But after sometime the problem returns.
But there is no loud beeping. Just a hot computer running since the lid was close. So the problem was not an issue at first.
I have also notice before upgrading to moutain lion when I was next to the notebook and while it is still sleeping it will sometimes make the usual noise when starting up or booting from sleep. But when I open the lid it is still asleep. I think the noise is from the dvd drive not too sure.
So the issue occured before upgrading and got worst after upgrading. What should I do? I have tried looking at console but don't seem to find a clue what log file shoud I be checking?

Ok I have send a request for a call back request. Hopefully I can speak to someone with a technical background and not ask me to go through a series of standard steps.
The notebook is running great no problems or issues. No kernal panic or problems booting. No traces in the log file of what went wrong. Previously in lion when the computer wakes up from sleep I could check the cause in console but as the computer now goes into beeping when waking up in moutain lion there is no traces at all.

Similar Messages

  • Mac Pro restarts when waking from sleep

    Hi everyone.
    I just got a brand new Mac Pro (2 x 2.66GHz), and had Apple upgrade the RAM to 2GB (4 x 512MB). My first problem is that the computer always restarts when waking from sleep, which is annoying! I have reset the SMC by unplugging the machine for a minite, but the problem persists. I have also tried sleeping the computer with nothing plugged in except the monitor and keyboard/mouse, but I get the same problem. All software/firmware is fully up to date.
    I have also just noticed that the System Profiler states that there is only 1GB RAM in the computer, even though I am sure that it recognised 2GB when I got the machine a fortnight ago (I even have a screen shot of 'about this mac' to prove it!). Can anybody help, or do I need to phone Apple support?
    Thanks,
    Matthew

    I have a similar problem - hard restart when closing the lid to put it to sleep. It looks like there is a bluetooth issue(?), but I'm not sure what to do with it. We don't have any blue tooth devices in our house. From the console log:
    Jan 5 14:57:49 Rigpa kernel[0]: System SafeSleep
    Jan 5 14:57:49 Rigpa mDNSResponder: Adding browse domain local.
    Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall start
    Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall time: 51 ms
    Jan 5 14:57:49 Rigpa kernel[0]: pages 93229, wire 29477, act 34496, inact 2520, zf 1141, could discard act 9830 inact 15765
    Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall found pageCount 93229
    Jan 5 14:57:49 Rigpa kernel[0]: IOHibernatePollerOpen, mlget_interruptsenabled 0
    Jan 5 14:57:49 Rigpa kernel[0]: IOHibernatePollerOpen(0)
    Jan 5 14:57:49 Rigpa kernel[0]: writing 92989 pages
    Jan 5 14:57:49 Rigpa kernel[0]: image1Size 41692160
    Jan 5 14:57:49 Rigpa kernel[0]: all time: 5774 ms, comp time: 437 ms, deco time: 0 ms,
    Jan 5 14:57:49 Rigpa kernel[0]: image 159194624, uncompressed 276045824 (67394), compressed 158654492 (57%), sum1 529d572d, sum2 c6e9eed5
    Jan 5 14:57:49 Rigpa kernel[0]: hibernatewriteimage done(0)
    Jan 5 14:57:49 Rigpa kernel[0]: sleep
    Jan 5 14:57:49 Rigpa kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
    Jan 5 14:57:49 Rigpa kernel[0]: Started CPU 01
    Jan 5 14:57:49 Rigpa kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
    Jan 5 14:57:49 Rigpa kernel[0]: System Wake
    Jan 5 14:57:52 Rigpa mDNSResponder: Repeated transitions for interface lo0 (127.0.0.1); delaying packets by 5 seconds
    Jan 5 14:57:53 Rigpa configd35: posting notification com.apple.system.config.network_change
    Jan 5 14:57:53 Rigpa lookupd185: lookupd (version 369.6) starting - Sat Jan 5 14:57:53 2008

  • Macbook Pro not always waking from sleep

    The only time I sleep my Macbook Pro is when I close the cover. Before I open it, I make sure that the light on the front is pulsating, indicating it is fully asleep.
    Sometimes when I open it is is waking up fine, and other times the screen just stays black and the light on the front remains pulsating. When the screen is black, pressing the power button or shutting the screen and opening it again has no effect - the only thing I can do is hold down the power button for 10 seconds and restart my computer.
    This only recently started happening. I'm running 10.5.4, but it started happening with 10.5.3, although I don't think it's system related because it didn't start right after I upgraded to 10.5.3 but some time after, only about 2 weeks ago from today.
    Any help on this matter would be appreciated!

    if you do a search, you will find other threads related to the sleep issue, and might find some insight there . . .
    it is strange, i was having the problem too, where the sleep problem would happen intermittently. after i realized there was a problem i stopped putting my mbp to sleep. but recently i have started to use the sleep mode for my mbp, and have not had this problem again.
    have you consulted with apple on your issue?

  • My mac pro restarts when waking from sleep

    Hello everyone pls help me.
    I have a annoying problem and that is that my Mac Pro restarts after it has been to sleep.
    Last week I updated the system with an update from Apple, safteyupdate 2013-003 version 1.0.
    I have swedish OsX 10.6.8.
    After this update my mac always restarts after waking from sleep.
    So what may have gone wrong?
    Pls help me in a simple way, and pls describe in easy steps if I have to do something.

    One suggestion is to always have cloned your system ahead of time, that means before making changes or updates, early on when it is fresh and working.
    And don't just restart. Use Safe Mode at least, better yet use Recovery Mode if on Lion (which I do recommend) and have a small OS Emergency drive for any maintenance - along with a clone working copy of your system.
    Don't just reinstall over your system. Do a fresh install on another drive. Image it and set that for maintenance, then clone that to be a new working base for your system.
    Setup Assistant does an amazing job.
    Forced restarts can corrupt the filesystem and directory as the changes in memory or cache are not written out and drives are not unmounted properly and will come to bite in the rear.
    Using Cloning as a Backup Strategy
    http://www.macupdate.com/app/mac/7032/carbon-copy-clone 
    http://www.bombich.com/software/updates/ccc-3.5.html
    Create an OS X Lion Install disc
    OS X Lion Install to Different Drive 
    How to create an OS X Lion installation disc MacFixIt
    Migration Assistant Update for Mac OS X Snow Leopard
    http://www.apple.com/support/lion/installrecovery/
    http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
    http://www.coolestguyplanettech.com/how-to-make-a-bootable-osx-10-8-mountain-lio n-disc-or-drive-from-the-downloaded-mountain-lion-app/
    How to clone your system:
    http://macperformanceguide.com/Mac-HowToClone-backup.html
    http://macperformanceguide.com/Mac-HowToClone.html
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
    http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
    General purpose Mac troubleshooting guide:
    Mac OS X: Starting up in Safe Mode - http://docs.info.apple.com/article.html?artnum=107393
    What is Safe Boot, Safe Mode? (Mac OS X) - http://support.apple.com/kb/HT1564
    Isolating issues in Mac OS X
    Creating a temporary user to isolate user-specific problems:
    Isolating an issue by using another user account
    Identifying resource hogs and other tips:
    Using Activity Monitor to read System Memory and determine how much RAM is being used
    Starting the computer in "safe mode":
    Mac OS X: What is Safe Boot, Safe Mode?
    To identify potential hardware problems:
    Apple Hardware Test
    General Mac maintenance:
    Tips to keep your Mac in top form

  • Macbook Pro restart after waking from sleep

    Hi all,
    Since I've installed Mountain Lion (10.8.2) on my 13" Late 2011 Macbook Pro I've been experiencing a quite annoying problem. The computer, which is connected to an external monitor through Thunderbolt to HDMI will restart (Sometimes to a gray screen with a progress bar) after waking from sleep. I've done some research and it would appear as though the problem is related to the display driver.
    I'm wondering if anyone has any experience with this peculiar problem or if there's a quick solution.
    Thanks!

    Maybe this will help. If you monitor the "More Like This" box, other solved threads appear. Opening them usually displays other threads.
    https://discussions.apple.com/message/19675376#19675376

  • MacBook Pro freezes when returning from sleep

    I recently started using a Kensington Bluetooth mouse with my MacBook Pro and the computer freezes whenever I return the computer from sleep. Nothing happens when I press Command-Option-Esc. The mouse pointer moves on the screen and the dock magnification works, but I'm not able to open any programs.
    I've confirmed that it has something to do with Bluetooth because I now turn off Bluetooth before returning it to sleep and it works fine. I just have to turn on Bluetooth using the trackpad and then I can use the mouse again. I'm thinking that this shouldn't be a requirement though.
    Has anyone else had this problem? Is there anything I can do to resolve?
    I appreciate any assistance!
    Thank you,
    Chris
    Mouse: Kensington PilotMouse Mini Bluetooth
    Bluetooth Version: 3.1965 (3.1965)

    For those of you who are interested, I think I've isolated the issue. If I turn off the option to allow Bluetooth devices to wake the computer from sleep, my computer doesn't freeze when I return from sleep. This is a better option for me than turning off Bluetooth before I put the computer to sleep.
    Let me know if you have any questions.

  • 2G Macbook air crashes when waking from sleep

    My MBA 13" is near perfect, the only problem is, 50% of the time when I wake the computer from sleep, the grey curtain comes down and i'm prompted to reboot.
    Happening quite a lot, it's still under warranty, is there a fix?

    http://support.apple.com/kb/TS3742

  • HELP: Mac Pro restarts when waking from sleep

    the problem just started a few days ago. i hadn't made any mods or installed any new software. all firmware is current.
    i've reset the NVRAM and SMC with no results.
    any suggestions?

    I have a similar problem - hard restart when closing the lid to put it to sleep. It looks like there is a bluetooth issue(?), but I'm not sure what to do with it. We don't have any blue tooth devices in our house. From the console log:
    Jan 5 14:57:49 Rigpa kernel[0]: System SafeSleep
    Jan 5 14:57:49 Rigpa mDNSResponder: Adding browse domain local.
    Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall start
    Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall time: 51 ms
    Jan 5 14:57:49 Rigpa kernel[0]: pages 93229, wire 29477, act 34496, inact 2520, zf 1141, could discard act 9830 inact 15765
    Jan 5 14:57:49 Rigpa kernel[0]: hibernatepage_listsetall found pageCount 93229
    Jan 5 14:57:49 Rigpa kernel[0]: IOHibernatePollerOpen, mlget_interruptsenabled 0
    Jan 5 14:57:49 Rigpa kernel[0]: IOHibernatePollerOpen(0)
    Jan 5 14:57:49 Rigpa kernel[0]: writing 92989 pages
    Jan 5 14:57:49 Rigpa kernel[0]: image1Size 41692160
    Jan 5 14:57:49 Rigpa kernel[0]: all time: 5774 ms, comp time: 437 ms, deco time: 0 ms,
    Jan 5 14:57:49 Rigpa kernel[0]: image 159194624, uncompressed 276045824 (67394), compressed 158654492 (57%), sum1 529d572d, sum2 c6e9eed5
    Jan 5 14:57:49 Rigpa kernel[0]: hibernatewriteimage done(0)
    Jan 5 14:57:49 Rigpa kernel[0]: sleep
    Jan 5 14:57:49 Rigpa kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
    Jan 5 14:57:49 Rigpa kernel[0]: Started CPU 01
    Jan 5 14:57:49 Rigpa kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
    Jan 5 14:57:49 Rigpa kernel[0]: System Wake
    Jan 5 14:57:52 Rigpa mDNSResponder: Repeated transitions for interface lo0 (127.0.0.1); delaying packets by 5 seconds
    Jan 5 14:57:53 Rigpa configd35: posting notification com.apple.system.config.network_change
    Jan 5 14:57:53 Rigpa lookupd185: lookupd (version 369.6) starting - Sat Jan 5 14:57:53 2008

  • MacBook Pro freezes when waking from deep sleep

    When I plug in my Mac to charge overnight and go to unplug it in the morning, it will make the sound it does with the CD drive and then it acts like it's coming on. the first time I use it  after I've unplugged it, the screen will come on like normal and show the login screen, when it does I can't move the mouse or type my password in for a minute or two. after about 20 seconds, the screen turns off...however I can turn it back on by clicking the power button but most of the time it still won't let me enter my password or move the mouse around. I'm not sure what the problem is. but it's only been doing this since I've updated to Yosemite.

    Try turning off "Allow Bluetooth devices to wake this computer" under the advanced section of the Bluetooth System Preferences.  Hope this helps.

  • Freezing when waking from sleep with latest Lion release?

    I have had both my IMac and MacBook Pro freeze upon waking from sleep recently. Occurred only after installing latest Lion upgrade. Very frustrating since requires hard reboot ronin case of the MacBook Pro, reinstalling the OS. I have noticed similar complaints by others. Any suggestions for a fix other than waiting for a new release?

    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Drag or copy – do not type – the following line into the Terminal window, then press return:
    pmset -g
    Post any lines of output that appear below what you entered – the text, please, not a screenshot.

  • When my MacBook pro late 2011 wakes from sleep i have it set to make me enter my password, but when that pace comes up the resolution of it is smaller than my screen. Why is this happening?

    When my MacBook pro late 2011 wakes from sleep i have it set to make me enter my password, but when that pace comes up the resolution of it is smaller than my screen. Why is this happening?

    I was at the Apple Service. The problem was the 750Gb Toshiba HDD. It's incredible what noise can make that little thing
    I didn't know the hdd position is on left on MBP 17" ,  I thought is the same position like MBP15"
    I did't lose any kind of data.. it was fix on time.
    Anyway, thank u guys....and don't forget that noise !!!  
    P.S. I'll make a song with that noise sample to remember it

  • Keychain is read-only when waking from sleep

    So, when waking from sleep my keychain becomes read-only and I'm forced to restart since many of the applications I tend to use (itunes, safari, skype. messages and disk utility) start giving me error messages or are unresponsive. I've tried repairing the keychain, deleting and creating a new keychain, reinstalling the OS (10.8), resetting the ACLs using the recovery partition, repairing permissions using the recovery partition. The only thing I haven't tried is wiping out the drive and installing the OS anew which I would like to avoid . I am on a 2010 13" macbook pro using 10.8.3. I don't think it started after an update. I did recently install a new hard drive since the previous hard drive died. I used time machine to restore my apps and user account. Advice anyone? Thanks

    Hello-
    Well I spoke to soon. The problem started a few weeks later. Since then I have installed the OS on to a new hard drive. I did import my user account from a time machine backup but did not import the Apps and System settings. I created a new account and moved my media and documents from my old account to the new account. I then deleted the old account. After all that I am still getting the read-only problem with Keychain. It now happens while I am using my laptop, not just when it wakes from sleep. As I mentioned before the issue is intermittent, about once or twice a week. The last occurrence happened a few minutes after I booted up. I have pasted the log below. I have taken it in to Apple and they ran a check-up and everything came back ok. I'm concerned because my apple care ends in about a week. Any advice you can give would be greatly appreciated. Thanks.
    7/10/13 6:52:39.000 AM bootlog[0]: BOOT_TIME 1373464359 0
    7/10/13 6:53:06.000 AM kernel[0]: Darwin Kernel Version 12.4.0: Wed May  1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
    7/10/13 6:53:06.000 AM kernel[0]: vm_page_bootstrap: 1944529 free pages and 70703 wired pages
    7/10/13 6:53:06.000 AM kernel[0]: kext submap [0xffffff7f80737000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000737000]
    7/10/13 6:53:06.000 AM kernel[0]: zone leak detection enabled
    7/10/13 6:53:06.000 AM kernel[0]: standard timeslicing quantum is 10000 us
    7/10/13 6:53:06.000 AM kernel[0]: standard background quantum is 2500 us
    7/10/13 6:53:06.000 AM kernel[0]: mig_table_max_displ = 74
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto kext started!
    7/10/13 6:53:06.000 AM kernel[0]: Running kernel space in FIPS MODE
    7/10/13 6:53:06.000 AM kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    7/10/13 6:53:06.000 AM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS POST passed!
    7/10/13 6:53:06.000 AM kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
    7/10/13 6:53:06.000 AM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
    7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for TMSafetyNet
    7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for Sandbox
    7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for Quarantine
    7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    7/10/13 6:53:06.000 AM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    7/10/13 6:53:06.000 AM kernel[0]: The Regents of the University of California. All rights reserved.
    7/10/13 6:53:06.000 AM kernel[0]: MAC Framework successfully initialized
    7/10/13 6:53:06.000 AM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    7/10/13 6:53:06.000 AM kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
    7/10/13 6:53:06.000 AM kernel[0]: ACPI: System State [S0 S3 S4 S5]
    7/10/13 6:53:06.000 AM kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
    7/10/13 6:53:06.000 AM kernel[0]: [ PCI configuration begin ]
    7/10/13 6:53:06.000 AM kernel[0]: console relocated to 0xf80010000
    7/10/13 6:53:06.000 AM kernel[0]: PCI configuration changed (bridge=1 device=1 cardbus=0)
    7/10/13 6:53:06.000 AM kernel[0]: [ PCI configuration end, bridges 5 devices 24 ]
    7/10/13 6:53:06.000 AM kernel[0]: AppleIntelCPUPowerManagement: (built 18:11:47 May  1 2013) initialization complete
    7/10/13 6:53:06.000 AM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 78ca39fffe131078; max speed s800.
    7/10/13 6:53:06.000 AM kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
    7/10/13 6:53:06.000 AM kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
    7/10/13 6:53:06.000 AM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    7/10/13 6:53:06.000 AM kernel[0]: rooting via boot-uuid from /chosen: F24E7B60-8654-3521-9DC6-9CA2F1979476
    7/10/13 6:53:06.000 AM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    7/10/13 6:53:06.000 AM kernel[0]: AppleIntelCPUPowerManagementClient: ready
    7/10/13 6:53:06.000 AM kernel[0]: BTCOEXIST off
    7/10/13 6:53:06.000 AM kernel[0]: BRCM tunables:
    7/10/13 6:53:06.000 AM kernel[0]: pullmode[1] txringsize[  256] txsendqsize[1024] reapmin[   32] reapcount[  128]
    7/10/13 6:53:06.000 AM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@A/AppleMCP89AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9750420AS Media/IOGUIDPartitionScheme/Untitled 1@2
    7/10/13 6:53:06.000 AM kernel[0]: BSD root: disk0s2, major 1, minor 2
    7/10/13 6:53:06.000 AM kernel[0]: Kernel is LP64
    7/10/13 6:52:40.694 AM com.apple.launchd[1]: *** launchd[1] has started up. ***
    7/10/13 6:52:40.694 AM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    7/10/13 6:53:06.879 AM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
    7/10/13 6:53:08.000 AM kernel[0]: BCM5701Enet: Ethernet address c4:2c:03:34:56:ec
    7/10/13 6:53:08.000 AM kernel[0]: AirPort_Brcm4331: Ethernet address f8:1e:df:ea:54:f5
    7/10/13 6:53:08.000 AM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    7/10/13 6:53:08.000 AM kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    7/10/13 6:53:09.000 AM kernel[0]: IOBluetoothUSBDFU::probe
    7/10/13 6:53:09.000 AM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8213 FirmwareVersion - 0x0201
    7/10/13 6:53:09.000 AM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController][start] -- completed
    7/10/13 6:53:09.000 AM kernel[0]: Previous Shutdown Cause: 5
    7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    7/10/13 6:53:09.000 AM kernel[0]: NVDAStartup: Official
    7/10/13 6:53:09.000 AM kernel[0]: NVDANV50HAL loaded and registered
    7/10/13 6:53:09.519 AM com.apple.SecurityServer[15]: Session 100000 created
    7/10/13 6:53:10.000 AM kernel[0]: DSMOS has arrived
    7/10/13 6:53:11.454 AM airportd[27]: _processDLILEvent: en1 attached (down)
    7/10/13 6:53:11.000 AM kernel[0]: createVirtIf(): ifRole = 1
    7/10/13 6:53:11.000 AM kernel[0]: in func createVirtualInterface ifRole = 1
    7/10/13 6:53:11.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff8017662400
    7/10/13 6:53:11.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
    7/10/13 6:53:11.000 AM kernel[0]: Created virtif 0xffffff8017662400 p2p0
    7/10/13 6:53:11.941 AM hidd[56]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    7/10/13 6:53:13.000 AM kernel[0]: macx_swapon SUCCESS
    7/10/13 6:53:14.349 AM configd[18]: setting hostname to "Pluto.local"
    7/10/13 6:53:14.000 AM kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
    7/10/13 6:53:14.000 AM kernel[0]: en1::IO80211Interface::postMessage bssid changed
    7/10/13 6:53:14.354 AM configd[18]: network changed.
    7/10/13 6:53:18.272 AM com.apple.SecurityServer[15]: Entering service
    7/10/13 6:53:18.519 AM blued[65]: Read the UHE Info
    7/10/13 6:53:18.519 AM blued[65]: Read version 2 info.  Number of devices:2
    7/10/13 6:53:18.519 AM blued[65]: Class of device:     0x2580
    7/10/13 6:53:18.519 AM blued[65]: Device name: 'ervin's' length:8
    7/10/13 6:53:18.519 AM blued[65]: Finished reading the HID data
    7/10/13 6:53:18.519 AM blued[65]: Found a device with PID:0x030d VID:0x05ac
    7/10/13 6:53:18.520 AM blued[65]: Class of device:     0x2540
    7/10/13 6:53:18.520 AM blued[65]: Device name: 'ervinsiax’s Keyboard' length:23
    7/10/13 6:53:18.520 AM blued[65]: Finished reading the HID data
    7/10/13 6:53:18.521 AM blued[65]: Found a device with PID:0x0255 VID:0x05ac
    7/10/13 6:53:18.987 AM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
    7/10/13 6:53:18.993 AM loginwindow[51]: Login Window Application Started
    7/10/13 6:53:20.506 AM awacsd[66]: Starting awacsd connectivity-78.3 (Apr 25 2013 19:22:44)
    7/10/13 6:53:20.510 AM awacsd[66]: InnerStore CopyAllZones: no info in Dynamic Store
    7/10/13 6:53:20.635 AM kdc[54]: label: default
    7/10/13 6:53:20.635 AM kdc[54]: dbname: od:/Local/Default
    7/10/13 6:53:20.635 AM kdc[54]: mkey_file: /var/db/krb5kdc/m-key
    7/10/13 6:53:20.635 AM kdc[54]: acl_file: /var/db/krb5kdc/kadmind.acl
    7/10/13 6:53:20.673 AM mDNSResponder[48]: mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56) starting OSXVers 12
    7/10/13 6:53:21.537 AM coreservicesd[70]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
    7/10/13 6:53:21.539 AM mds[47]: (Normal) FMW: FMW 0 0
    7/10/13 6:53:21.836 AM appleeventsd[62]: main: Starting up
    7/10/13 6:53:21.865 AM com.apple.usbmuxd[36]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
    7/10/13 6:53:23.268 AM aosnotifyd[85]: bootstrap_look_up failed (44e)
    7/10/13 6:53:24.487 AM netbiosd[69]: Unable to start NetBIOS name service:
    7/10/13 6:53:24.499 AM digest-service[87]: label: default
    7/10/13 6:53:24.499 AM digest-service[87]: dbname: od:/Local/Default
    7/10/13 6:53:24.499 AM digest-service[87]: mkey_file: /var/db/krb5kdc/m-key
    7/10/13 6:53:24.499 AM digest-service[87]: acl_file: /var/db/krb5kdc/kadmind.acl
    7/10/13 6:53:24.501 AM digest-service[87]: digest-request: uid=0
    7/10/13 6:53:24.532 AM rpcsvchost[88]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
    7/10/13 6:53:24.538 AM digest-service[87]: digest-request: init request
    7/10/13 6:53:24.544 AM digest-service[87]: digest-request: init return domain: BUILTIN server: PLUTO
    7/10/13 6:53:25.353 AM systemkeychain[75]: done file: /var/run/systemkeychaincheck.done
    7/10/13 6:53:25.374 AM kdc[54]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
    7/10/13 6:53:25.387 AM configd[18]: network changed: DNS*
    7/10/13 6:53:25.393 AM mDNSResponder[48]: D2D_IPC: Loaded
    7/10/13 6:53:25.393 AM mDNSResponder[48]: D2DInitialize succeeded
    7/10/13 6:53:25.396 AM configd[18]: network changed: DNS*
    7/10/13 6:53:25.398 AM mDNSResponder[48]: Adding registration domain 40041775.members.btmm.icloud.com.
    7/10/13 6:53:25.671 AM kdc[54]: KDC started
    7/10/13 6:53:26.235 AM WindowServer[71]: Server is starting up
    7/10/13 6:53:26.652 AM locationd[52]: NOTICE,Location icon should now be in state 0
    7/10/13 6:53:27.102 AM awacsd[66]: Configuring lazy AWACS client: 40041775.p03.members.btmm.icloud.com.
    7/10/13 6:53:28.499 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    7/10/13 6:53:28.500 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    7/10/13 6:53:28.598 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    7/10/13 6:53:28.599 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    7/10/13 6:53:28.618 AM awacsd[66]: KV HTTP 0
    7/10/13 6:53:28.908 AM WindowServer[71]: Session 256 retained (2 references)
    7/10/13 6:53:28.908 AM WindowServer[71]: Session 256 released (1 references)
    7/10/13 6:53:30.969 AM WindowServer[71]: Session 256 retained (2 references)
    7/10/13 6:53:30.970 AM WindowServer[71]: init_page_flip: page flip mode is on
    7/10/13 6:53:31.409 AM WindowServer[71]: mux_initialize: Couldn't find any matches
    7/10/13 6:53:31.426 AM WindowServer[71]: GLCompositor enabled for tile size [256 x 256]
    7/10/13 6:53:31.426 AM WindowServer[71]: CGXGLInitMipMap: mip map mode is on
    7/10/13 6:53:33.627 AM awacsd[66]: KV HTTP 0
    7/10/13 6:53:34.283 AM WindowServer[71]: WSMachineUsesNewStyleMirroring: false
    7/10/13 6:53:34.283 AM WindowServer[71]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    7/10/13 6:53:34.283 AM WindowServer[71]: Display 0x042730c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 27 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc3, S/N 0, Unit 0, Rotation 0
    UUID 0x0000061000009cc300000000042730c0
    7/10/13 6:53:34.284 AM WindowServer[71]: Created shield window 0x5 for display 0x003f003d
    7/10/13 6:53:34.288 AM WindowServer[71]: Created shield window 0x6 for display 0x042730c0
    7/10/13 6:53:35.073 AM WindowServer[71]: Display 0x042730c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 27 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc3, S/N 0, Unit 0, Rotation 0
    UUID 0x0000061000009cc300000000042730c0
    7/10/13 6:53:35.073 AM WindowServer[71]: Display 0x003f003d: GL mask 0x2; bounds (2304, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    7/10/13 6:53:35.073 AM WindowServer[71]: CGXPerformInitialDisplayConfiguration
    7/10/13 6:53:35.073 AM WindowServer[71]:   Display 0x042730c0: MappedDisplay Unit 0; Vendor 0x610 Model 0x9cc3 S/N 0 Dimensions 11.26 x 7.05; online enabled built-in, Bounds (0,0)[1280 x 800], Rotation 0, Resolution 1
    7/10/13 6:53:35.073 AM WindowServer[71]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2304,0)[1 x 1], Rotation 0, Resolution 1
    7/10/13 6:53:36.423 AM WindowServer[71]: GLCompositor: GL renderer id 0x0102261a, GL mask 0x00000003, accelerator 0x00003c8b, unit 0, caps QEX|QGL|MIPMAP, vram 256 MB
    7/10/13 6:53:36.433 AM WindowServer[71]: GLCompositor: GL renderer id 0x0102261a, GL mask 0x00000003, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
    7/10/13 6:53:36.436 AM loginwindow[51]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    7/10/13 6:53:36.454 AM hidd[56]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
    7/10/13 6:53:36.607 AM WindowServer[71]: Unable to open IOHIDSystem (e00002bd)
    7/10/13 6:53:36.000 AM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
    7/10/13 6:53:37.536 AM WindowServer[71]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    7/10/13 6:53:39.901 AM fseventsd[57]: Logging disabled completely for device:1: /Volumes/Recovery HD
    7/10/13 6:53:43.565 AM WindowServer[71]: Created shield window 0x7 for display 0x042730c0
    7/10/13 6:53:43.566 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
    7/10/13 6:53:43.586 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
    7/10/13 6:53:43.635 AM awacsd[66]: KV HTTP 0
    7/10/13 6:53:43.927 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
    7/10/13 6:53:43.979 AM launchctl[124]: com.apple.findmymacmessenger: Already loaded
    7/10/13 6:53:44.003 AM com.apple.SecurityServer[15]: Session 100004 created
    7/10/13 6:53:44.146 AM hidd[56]: CGSShutdownServerConnections: Detaching application from window server
    7/10/13 6:53:44.147 AM hidd[56]: CGSDisplayServerShutdown: Detaching display subsystem from window server
    7/10/13 6:53:44.186 AM loginwindow[51]: Login Window Started Security Agent
    7/10/13 6:53:44.361 AM SecurityAgent[133]: This is the first run
    7/10/13 6:53:44.362 AM SecurityAgent[133]: MacBuddy was run = 0
    7/10/13 6:53:44.367 AM coreaudiod[134]: Enabled automatic stack shots because audio IO is inactive
    7/10/13 6:53:45.276 AM UserEventAgent[125]: cannot find useragent 1102
    7/10/13 6:53:46.754 AM SecurityAgent[133]: spawn_via_launchd() failed, errno=5 label=[0x0-0x7007].com.apple.AppleSpell path=/System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell flags=0
    7/10/13 6:53:46.754 AM SecurityAgent[133]: spawn_via_launchd() failed, errno=5 label=[0x0-0x7007].com.apple.AppleSpell path=/System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell flags=0
    7/10/13 6:53:50.000 AM kernel[0]: USBMSC Identifier (non-unique): 20080718000003 0x928 0xa 0x0
    7/10/13 6:53:53.435 AM _netbios[143]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds
    7/10/13 6:53:53.790 AM _netbios[146]: Unable to resolve hostname(s)
    7/10/13 6:53:53.808 AM ntpd[81]: proto: precision = 1.000 usec
    7/10/13 6:54:02.217 AM SecurityAgent[133]: User info context values set for ervin
    7/10/13 6:54:02.657 AM SecurityAgent[133]: Login Window login proceeding
    7/10/13 6:54:03.085 AM loginwindow[51]: Login Window - Returned from Security Agent
    7/10/13 6:54:03.132 AM loginwindow[51]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
    7/10/13 6:54:03.148 AM loginwindow[51]: USER_PROCESS: 51 console
    7/10/13 6:54:03.329 AM com.apple.launchd.peruser.503[149]: (com.apple.gamed) Ignored this key: UserName
    7/10/13 6:54:03.329 AM com.apple.launchd.peruser.503[149]: (com.apple.gamed) Ignored this key: GroupName
    7/10/13 6:54:03.330 AM com.apple.launchd.peruser.503[149]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    7/10/13 6:54:03.337 AM loginwindow[51]: Connection with distnoted server was invalidated
    7/10/13 6:54:03.375 AM distnoted[153]: # distnote server agent  absolute time: 85.254455240   civil time: Wed Jul 10 06:54:03 2013   pid: 153 uid: 503  root: no
    7/10/13 6:54:03.640 AM awacsd[66]: KV HTTP 0
    7/10/13 6:54:04.135 AM blued[65]: kBTXPCUpdateUserPreferences gConsoleUserUID = 503
    7/10/13 6:54:04.868 AM com.apple.SecurityServer[15]: Session 100007 created
    7/10/13 6:54:07.730 AM WindowServer[71]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    7/10/13 6:54:07.934 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
    7/10/13 6:54:08.208 AM NetworkBrowserAgent[184]: Starting NetworkBrowserAgent
    7/10/13 6:54:08.867 AM talagent[177]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, _kLSApplicationIsHiddenKey, hidden ? kCFBooleanTrue : kCFBooleanFalse, NULL) produced OSStatus -50 on line 623 in TCApplication.m
    7/10/13 6:54:08.868 AM talagent[177]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, TAL_kLSIsProxiedForTALKey, kCFBooleanTrue, NULL) produced OSStatus -50 on line 626 in TCApplication.m
    7/10/13 6:54:09.311 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
    7/10/13 6:54:09.357 AM coreservicesd[70]: Can't change an application into stopped state for app App:"iTunes" [ 0x0/0xa00a]  @ 0x0x7fe8b9e31660 because it's already been started.
    7/10/13 6:54:09.521 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
    7/10/13 6:54:09.000 AM kernel[0]: NTFS driver 3.10 [Flags: R/W].
    7/10/13 6:54:09.000 AM kernel[0]: NTFS volume name , version 3.1.
    7/10/13 6:54:09.000 AM kernel[0]: NTFS-fs warning (device /dev/disk1s1, pid 188): ntfs_system_inodes_get(): $LogFile is not clean.  Will not be able to remount read-write.  Mount in Windows.
    7/10/13 6:54:12.043 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
    7/10/13 6:54:16.235 AM WindowServer[71]: CGXDisableUpdate: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
    7/10/13 6:54:16.249 AM WindowServer[71]: reenable_update_for_connection: UI updates were finally reenabled by application "Finder" after 1.01 seconds (server forcibly re-enabled them after 1.00 seconds)
    7/10/13 6:54:17.067 AM SystemUIServer[178]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    7/10/13 6:54:17.067 AM SystemUIServer[178]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    7/10/13 6:54:24.396 AM CalendarAgent[190]: [com.apple.calendar.store.log.caldav.queue] [Got error on refresh, but not rectifying principal because it was manually configured: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f9c328d8100 {NSUnderlyingError=0x7f9c32891880 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSErrorFailingURLKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSLocalizedDescription=The Internet connection appears to be offline.}]
    7/10/13 6:54:24.426 AM CalendarAgent[190]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f9c328da810 {NSUnderlyingError=0x7f9c32891880 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSErrorFailingURLKey=

  • Desktop Wallpaper Screensaver Bug? [When waking from sleep]

    I'm not sure if this topic is in the correct category but it seems to fit.
    I have a new 15.4" MacBook Pro with OS 10.6.3. I have multiple images that I want as a wallpaper and so I decided to select "Change picture" in the preferences pane. I also selected "Random order" and chose "When waking from sleep" as the time for the wallpaper to change.
    However, if I close my lid, and then re-open it, when the computer wakes up, instead of the wallpaper changing, it changes twice.
    Now, this isn't really a problem but it can get annoying sometimes and I was wondering if this problem is due to something I do, rather than the operating system.
    Thanks.

    I just noticed something, perhaps this will help? There appear to be two kinds of sleep, display sleep and computer sleep. I noticed that if my machine is running (playing music, for instance) and the display goes to sleep, when I use the mouse to wake up the screen the background changes. So maybe when I wake up the machine from computer sleep it changes once for waking from computer sleep, and once more for waking from display sleep?

  • Trackpad Jerky or Unresponsive when waking from sleep

    I've been having a problem with my trackpad being extremely jerky and unresponsive when it is waking up from sleep. I am a new mac user and I've only had my macbook pro since christmas and this problem is really getting annoying. Twice, I've had to just push the power button and press enter so my notebook would shut down and I could restart. Any Ideas?

    First, when waking from sleep, MBP requires a little to get up to speed as it wakes if properly put to sleep. The MBP does hibernate and write to the hard disc when sleeping and this takes some time as does reading back. The book will be viewable immediately on waking but can seem laggard while fully getting up to speed from hibernation. Do not try to wake the computer until the little wake/sleep light has begun pulsing. Two, if you have a usb connection going or an expresscard inserted ... ensure that it lets the computer wake/sleep properly. Before sleeping the 'book, power off the connected items so that they do not interfere with the process.
    What connections do you use? and what processes are going when you attempt to sleep the computer?
    Use the Activity Monitor and the Console to check what is happening. Both the Console Log and the System Log in the console can provide you with info regarding your problems. Check the logs and post problematic entries here if you cannot interpret them yourself.
    Message was edited by: Rhyd

  • 10.4.9 Killed "Require Password when waking from sleep"

    My MacBook Pro 2.33 will no longer ask for my password when waking from sleep. (Photoshop CS2 was also hanging on launch, but a permission repair fixed that). This is troublesome.

    Hi,
    There is an answer for that already
    - see http://discussions.apple.com/thread.jspa?threadID=889382&tstart=60
    Cheers,
    Walter
    ++++++ (still lurking for helpful answer points)

Maybe you are looking for

  • Using (Select All) for report parameter

    Hi there, I am Looking for assistance in making the the (Select All) option work for a particular report. The parameter is for product families (which there are about 47 unique results for). The report is also influenced by two other parameters, one

  • What is the "best" location for images?

    2 Problems: - IPhoto has developed many picture icons that are no longer pointing to the photo they once were, there is just a icon and no image, the file name is visible in the info pane of iPhoto. They are still represented by icons in iPhoto in th

  • How can I listen to itunes and play a game at the same time on my ipad 4?

    How can I listen to itunes and play a game at the same time on my ipad 4? This means I need to run 2 apps at the same time itunes and my game.  The game has its own sound control so I can turn off its sound while i listen to itunes tracks.  But I don

  • Convert Purchase Order to Requisition when contract void

    Hi We are using SRM 5.0, R/3 Backend is 4.6C. For purchase orders for items with contracts that are expired or for incoming requests exceeding target quantity in the contract, we intend to have the purchase order converted to a purchase requisistion

  • All sound on computer echoes in ventr

    I just installed Sound Blaster Audigy SE. I can hear sounds ok, recorded sounds are very weak. I can however talk to others using Ventrilo, but when I do all sound on the computer is echoed back to them, including any game sounds and their own voices